Detection of human leucocytes by cyclic voltammetry and its application to monitoring of allergic reaction

Cyclic voltammetry was applied to the detection of human leucocytes and the monitoring of allergic reactions. A basal plane pyrolytic graphite electrode with attached leucocytes on a porous nitrocellulose membrane filter was employed as a working electrode. An anodic peak current appeared at 0.33 V versus the saturated calomel electrode (SCE) when the potential of the working electrode was scanned in the range of 0-1.0 V versus SCE. This peak current was attributed to the electrochemical oxidation of serotonin. When egg white was added to leucocytes obtained from patients who were allergic to egg, the peak current decreased owing to degranulation of leucocytes leading to serotonin release. The peak current decreased with increasing allergen concentration in the range of 5-50 micrograms ml-1. Leucocytes did not respond to other allergens such as soybean, milk and dinitrophenylated bovine serum albumin (DNP-BSA).     

Electrochemical detection of viable bacteria in urine and antibiotic selection.

An electrode system consisting of a basal-plane pyrolytic graphite (BPG) electrode and a porous nitrocellulose membrane filter to trap bacteria was used for the detection of bacteria in urine. The peak current of a cyclic voltammogram increased with increasing initial cell concentration of Escherichia coli in urine. Urine containing from 5 x 10(2) to 5 x 10(5) cells ml-1 was measured with this system. The susceptibility of bacteria to various antibiotics was also determined from the peak current. The minimum inhibitory concentration values obtained by the electrochemical method were in good agreement with those obtained by the conventional method.     

In vitro electrochemical detection of wheat allergen using rat basophilic leukaemia (RBL-1) cells

We have investigated an electrochemical method of detecting foods that cause an allergic reaction. Rat basophilic leukaemia (RBL-1) cells were sensitized with serum from a rat that was allergic to wheat. A sample containing the protein fraction of a food was added to the cells and incubated. The cells were immobilized on a membrane filter and attached to a basalplane pyrolytic graphite electrode. When a potential was applied in the range 0–1.0 V relative to a saturated calomel electrode, an anodic peak current appeared at around 0.33 V. This peak current, attributed to serotonin, increased with time, and the maximum current (0.5 A) was obtained 20–25 min of incubation. The response of the RBL-1 cells was specific to the protein fraction of wheat. The peak current increased linearly with increasing protein concentration in the range of 0.01–0.5 g ml^–1. These results suggest that the concentration of the protein bringing about the allergic reaction can be determined by cyclic voltammetry within 25 min. This method is more sensitive than the conventional skin tests.     

Plasmid-encoded resistance to arsenic and antimony.

Resistance determinants to the toxic oxyanionic salts of arsenic and antimony are found on plasmids of both gram-negative and gram-positive organisms. In most cases these provide resistance to both the oxyanions of +III oxidation state, antimonite and arsenite, and the +V oxidation state, arsenate. In both gram-positive and -negative bacteria, resistance is correlated with efflux of the anions from cells. The determinant from the plasmid R773, isolated from a gram-negative organism, has been studied in detail. It encodes an oxyanion-translocating ATPase with three subunits, a catalytic subunit, the ArsA protein, a membrane subunit, the ArsB subunit, and a specificity factor, the ArsC protein. The first two form a membrane-bound complex with arsenite-stimulated ATPase activity. The determinants from gram-positive bacteria have only the arsB and arsC genes and encode an efflux system without the participation of an ArsA homologue.     

Simple filter paper procedure for estimation of glucose uptake via group translocation by whole-cell suspensions of bacteria.

A simple and rapid filter paper technique is described for processing samples from glucose uptake studies with whole cells of gram-positive or gram-negative bacteria that transport glucose via group translocation. The procedure yields results equivalent to those obtained with a conventional membrane filtration method and requires no special filtration equipment or source of vacuum.     

Electrochemical Prevention of Marine Biofouling with a Carbon-Chloroprene Sheet

A carbon-chloroprene sheet (CCS) electrode was used for the electrochemical disinfection of the marine gram-negative bacterium Vibrio alginolyticus. When the electrode was incubated in seawater containing 10⁵ cells per ml for 90 min, the amount of adsorbed cells was 4.5 × 10³ cells per cm². When a potential of 1.2 V versus a saturated calomel electrode was applied to the CCS for 20 min, 67% of adsorbed cells were killed. This disinfection was due to the direct electrochemical oxidation of cells and not to a change in pH or to the generation of toxic substances, such as chlorine. In a 1-year field experiment, marine biofouling of a CCS-coated cooling pipe caused by attachment of bacteria and invertebrates was considerably reduced by application of a potential of 1.2 V versus a saturated calomel electrode. Since this method requires low potential electrical energy, use of a CCS coating appears to be a suitable method for the clean prevention of marine biofouling.     

Prevention of marine biofouling using a conductive paint electrode

Conductive paint electrode was used for marine biofouling on fishing nets by electrochemical disinfection. When a potential of 1.2 V vs. a saturated calomel electrode (SCE) was applied to the conductive paint electrode, Vibrio alginolyticus cells attached on the electrode were completely killed. By applying a negative potential, the attached cells were removed from the surface of the electrode. Changes in pH and chlorine concentration were not observed at potentials in the range -0.6 approximately 1.2 V vs. SCE. In a field experiment, accumulation of the bacterial cells and formation of biofilms on the electrode were prevented by application of an alternating potential, and 94% of attachment of the biofouling organisms was inhibited electrically on yarn used for fishing net coated with conductive paint. Copyright 1998 John Wiley & Sons, Inc.     

Electrochemical disinfection of bacteria in drinking water using activated carbon fibers

A novel electrochemical reactor employing activated carbon fiber (ACF) electrodes was constructed for disinfecting bacteria in drinking water. Escherichia coli adsorbed preferentially onto ACF rather than to carbon-cloth or granular-activated carbon. E. coli cells, which adsorbed onto the ACF, were killed electrochemically when a potential of 0.8 V vs. a saturated calomel electrode (SCE) was applied. Drinking water was passed through the reactor in stop-flow mode: 2mL/min for 12 h, o L/min for 24 h, and 1 mL/min for 6 h. At an applied potential of 0.8 V vs, SCE, viable cell concentration reamined below 30 cells/mL. In the absence of an applied potential, bacteria grew to a maximum concentration of 9.5 x 10(3) cells/mL. After continuous operation at 0.8 V vs. SCE, cells adsorbed onto the ACF could not be observed by scanning electron microscopy. In addition, chlorine in drinking water was completely removed by the reactor. Therefore, clean and efficient inactivation of bacteria in drinking water was successfully performed. (c) 1994 John Wiley & Sons, Inc.     

Evidence that mycoplasmas, gram-negative bacteria, and certain gram-positive bacteria share a similar protein antigen.

It was demonstrated that mycoplasmas, gram-negative bacteria, and certain gram-positive bacteria share a similar protein antigen with a molecular weight ranging from 42,000 to 48,000. Western blotting (immunoblotting) with an antibody specific to a 43-kDa membrane protein of Mycoplasma fermentans showed the existence of this protein antigen in all Mycoplasma spp. tested (14 species), Acholeplasma laidlawii (1 strain), and gram-negative bacteria (8 species) but only in Staphylococcus aureus of four gram-positive species tested. Neither Ureaplasma urealyticum nor mammalian cell cultures showed any cross-reactions with this antibody. These proteins were found in both cytoplasmic and membrane fractions of mycoplasma cells but were not exposed on the surface of mycoplasmal or bacterial cells.     

Preferential use of an anode as an electron acceptor by an acidophilic bacterium in the presence of oxygen

Several anaerobic metal-reducing bacteria have been shown to be able to donate electrons directly to an electrode. This property is of great interest for microbial fuel cell development. To date, microbial fuel cell design requires avoiding O(2) diffusion from the cathodic compartment to the sensitive anodic compartment. Here, we show that Acidiphilium sp. strain 3.2 Sup 5 cells that were isolated from an extreme acidic environment are able to colonize graphite felt electrodes. These bacterial electrodes were able to produce high-density electrocatalytic currents, up to 3 A/m(2) at a poised potential of +0.15 V (compared to the value for the reference standard calomel electrode) in the absence of redox mediators, by oxidizing glucose even at saturating air concentrations and very low pHs.     

Voltammetry of tobacco mosaic virus and its isolated protein at the graphite electrode

The electrochemical behaviour of tobacco mosaic virus (TMV) and its isolated protein was studied using differential pulse (DP) voltammetry at a graphite electrode and by direct current (DC) polarography in Brdicka solution. TMV and its isolated protein were found to be electrooxidized at the graphite electrode in the adsorbed state. Both species yielded two oxidation peaks on DP voltammograms. The first, more negative peak, corresponded to electrooxidation of tyrosine residues, whereas the other, more positive, peak corresponded to electrooxidation of tryptophan residues. DC polarography was used to detect degradation of TMV and denaturation of TMV-protein induced by an increased pH and by the addition of urea, respectively. These structural transformations resulted in increased DP voltammetric oxidation currents as recorded using a graphite working electrode. It has been suggested that the higher oxidation currents were due to an increase in the number of tyrosine and tryptophan residues accessible to the reaction at the graphite electrode. The results of these electrochemical investigations were in a good agreement with the estimation of the accessibility of tyrosine and tryptophan residues based on the well-explored three-dimensional structure of TMV and its isolated protein.     

Lidocaine Hydrochloride and Acetylsalicylate Kill Bacteria by Disrupting the Bacterial Membrane Potential in Different Ways

Lidocaine hydrochloride (LH), a local anesthetic, and acetylsalicylate (AcSAL), show antibacterial activity for both gram-negative and gram-positive bacteria. Kinetic studies indicated that antibacterial activity of LH was different from that of AcSAL. A subinhibitory concentration of LH and AcSAL enhanced the sensitivity of Escherichia coli, Salmonella typhimurium, and Pseudomonas aeruginosa to novobiocin and nalidixic acid. The synergistic effect of AcSAL with novobiocin and nalidixic acid was higher than that of LH. The effect of both drugs on the membrane potential of inner membrane was also studied using inverted membrane vesicles of bacteria. Both LH and AcSAL depolarized the membrane potential after the vesicles were energized with nicotinamide adenine dinucleotide. However, unlike AcSAL, pre-treatment of vesicles with LH had no effect on the generation of membrane potential. These results suggest that depolarization of the cytoplasmic membrane, preceded by the permeabilization of the outer membrane for gram-negative bacteria, is associated with antibacterial activity of LH and AcSAL. The difference in actions of LH and AcSAL was discussed.     

A novel approach for the selective determination of tryptophan in blood serum in the presence of tyrosine based on the electrochemical reduction of oxidation product of tryptophan formed in situ on graphite electrode

In this study, a novel method was proposed for the selective determination of tryptophan (TRP) in blood serum in the presence of tyrosine. This method is based on the electrochemical reduction of 2-amino-3-(5-oxo-3,5-dihydro-2H-indol-3-yl)-propionic acid (5-O-3,5DH-TRP) formed by the oxidation of TRP on the electrochemically treated pencil graphite (ETPG) electrode surface at a suitable potential value. The parameters affecting the TRP determination were deeply investigated. The optimal pH value was determined as 3. The highest reduction current intensity was obtained at the accumulation potential and time values of +0.95 V and 120 s, respectively. The reduction peak current values of 5-O-3,5DH-TRP versus TRP concentration at the ETPG electrode showed linearity in the range from 0.5 μM to 50.0 μM (R(2)=0.9962) with a detection limit of 0.05 μM (S/N=3). The reduction peak intensity of 5-O-3,5DH-TRP on the ETPG electrode showed no significant change in the presence of different interfering substances. The analytical application of the proposed novel method was successfully tested by using human blood serum samples.     

Antimicrobial properties of diacetyl.

Diacetyl preparations from three commercial sources were found to be essentially similar when tested primarily against a set of 40 cultures, including 10 of lactic acid bacteria, 4 of yeasts, 12 of gram-positive non-lactic acid bacteria, and 14 of gram-negative bacteria. The compound was effective at pH less than or equal to 7.0 and progressively ineffective at pH greater than 7.0. The lactic acid bacteria were essentially unaffected by concentrations between 100 and 350 micrograms/ml over the pH range of 5.0 to 7.0. Of the 12 gram-positive non-lactic acid bacteria, 11 were inhibited by 300 micrograms/ml at pH less than or equal to 7.0. The three yeasts and the 13 gram-negative bacteria that grew at pH 5.5 were inhibited by 200 micrograms/ml. Diacetyl was ineffective against four clostridia under anaerobic conditions. It was lethal for gram-negative bacteria and generally inhibitory for gram-positive bacteria. Nongrowing cells were not affected. The effectiveness of diacetyl was considerably less in brain heart infusion broth, Trypticase soy agar, and cooked-meat medium than in nutrient broth or plate count agar. The antimicrobial activity was antagonized by glucose, acetate, and Tween 80 but not by gluconic acid. As an antimicrobial agent, diacetyl was clearly more effective against gram-negative bacteria, yeasts, and molds than against gram-positive bacteria.     

Catechol sensor using poly(aniline-co-o-aminophenol) as an electron transfer mediator

In this work, poly(aniline-co-o-aminophenol) (copolymer) was used as an electron transfer mediator in the electrochemical oxidation of catechol due to its reversible redox over a wide range of pH. The experimental results indicate that the anodic peak potential of catechol at the copolymer electrode is lower than that at the platinum electrode in a solution consisting of catechol and sodium sulfate with pH 5.0, and the activation energy for the electrochemical oxidation of catechol at the copolymer electrode is low (23.6 kJ mol(-1)). These are strong evidence for the electrocatalytic oxidation of catechol at the copolymer electrode. The -OH group on the copolymer chain plays an important role in the electron transfer between the copolymer electrode and catechol in the solution. Based on the catalytic oxidation, the copolymer is used as a sensor to determine the concentration of catechol. The response current of the sensor depends on the concentration of catechol, pH, applied potential and temperature. At 0.55 V (versus saturated calomel reference electrode (SCE)) and pH 5.0, the sensor has a fast response (about 10s) to catechol and good operational stability. The sensor shows a linear response range between 5 and 80 microM catechol with a correlation coefficient of 0.997. It was found that phenol and resorcinol cannot be oxidized at the copolymer electrode at potentials < or =0.55 V, so controlling the sensor potential affords a good way of avoiding the effect of phenol and resorcinol on the determination of catechol.     

Simultaneous determination of flavones and phenolic acids in the leaves of Ricinus communis Linn. by capillary electrophoresis with amperometric detection

Capillary electrophoresis (CE) with amperometric detection (AD) has been developed for the separation and determination of disaccharide glycoside rutin, gentistic acid, quercetin, and gallic acid in the leaves of Ricinus communis Linn. for the first time. The effects of the acidity and the concentration of the running buffer, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions for the determination of the four analytes. The detection electrode was a 300microm diameter carbon disc electrode at a detection potential of +0.90V (versus saturated calomel electrode (SCE)). The four analytes could be well separated within 10min in a 40cm length fused silica capillary at a separation voltage of 15kV in a 50mM borate buffer (pH 9.0). The relation between peak current and analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N=3) ranging from 0.8 to 2.9microM for all the analytes. The proposed method has been successfully applied to monitor flavones and phenolic acids in the real plant samples with satisfactory assay results.     

Growth and Bacteriolytic Activity of a Soil Amoeba, Hartmannella glebae

A soil amoeba, Hartmannella glebae, could grow on a variety of gram-positive and gram-negative bacteria, although the rate of growth was faster in the presence of gram-negative bacteria. The amoeba, however, could not use yeasts, molds, or a green alga as a nutritional source. The extract prepared from amoebae grown in the presence of Aerobacter aerogenes and Alcaligenes faecalis could lyse intact cells and cell walls of many gram-positive bacteria at different rates. The spectrum of lytic activity was similar to that of egg-white lysozyme, with the exception that several species and strains of Bacillus, Micrococcus, and Staphylococcus were resistant to lysozyme and susceptible to the extract. The gram-negative bacteria tested were resistant.     

Preparation of a colored conductive paint electrode for electrochemical inactivation of bacteria

In this study we describe the preparation of a colored conductive paint electrode containing In(2)O(3), SnO(2), or TiO(2) for the electrochemical inactivation of marine bacteria. When each colored conductive paint electrode was immersed in seawater containing 10(6) cells/mL for 90 min, marine microbe attachment to the TiO(2)/SnO(2)/Sb electrode surface was minimal. Preparation of electrodes coated with 40% particles is shown to be more cost-effective, and because of their more translucent coatings they can be painted over with bright colors. When a potential of 1.0 V was applied for 30 min to the colored conductive paint electrode (40 wt% TiO(2)/SnO(2)/Sb) in sterile seawater, the survival ratio decreased to 55%. When 1.5 V vs. saturated calomel electrode (SCE) was applied, all attached cells were inactivated. Chlorine was not detected below an applied potential of 1.5 V. A change in pH was not observed in the range of 0 to 1.5 V. This method might be effective for preventing bacterial cell accumulation and the formation of biofilms.     

Occurrence and ultrastructural characterization of bacteria in association with and isolated from Azolla caroliniana.

The occurrence and ultrastructure of bacteria in leaf cavities of symbiotic Azolla caroliniana were examined by transmission electron microscopy. Bacteria were observed in all leaf cavities of Azolla cultures. Five ultrastructurally distinct types of bacteria were observed in each individual leaf cavity. Features used to characterize the bacteria included morphology, cell wall structure, and cytoplasmic organization. At least one gram-positive and as many as four gram-negative types of bacteria reside in leaf cavities of A. caroliniana. The morphological and ultrastructural characteristics of the gram-positive bacterium suggest that it is an Arthrobacter sp. The gram-negative bacteria could not be cultured; therefore, they have not been classified further. Bacterial cell shape and cell wall structure were similar in leaf cavities of different ages, but cell size and cytoplasmic composition varied. The relative contributions of each bacterial type to the total community within individual leaves was determined. Ultrastructural characteristics of bacterial isolates cultured from A. caroliniana in a free-living state were also examined.     

High-frequency conjugal plasmid transfer from gram-negative Escherichia coli to various gram-positive coryneform bacteria.

We report on the mobilization of shuttle plasmids from gram-negative Escherichia coli to gram-positive corynebacteria mediated by P-type transfer functions. Introduction of plasmids into corynebacteria was markedly enhanced after heat treatment of the recipient cells. High-frequency plasmid transfer was also observed when the restriction system of the recipient was mutated. On the basis of our data, we conclude that efficient DNA transfer from gram-negative to gram-positive bacteria, at least to coryneform bacteria, is conceivable in certain natural ecosystems.