Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Rapid phosphotransfer to CheY from a CheA protein lacking the CheY-binding domain

The histidine protein kinase CheA plays a central role in the bacterial chemotaxis signal transduction pathway. Autophosphorylated CheA passes its phosphoryl group to CheY very rapidly (k(cat) approximately 750 s(-)(1)). Phospho-CheY in turn influences the direction of flagellar rotation. The autophosphorylation site of CheA (His(48)) resides in its N-terminal P1 domain. The adjacent P2 domain provides a high-affinity binding site for CheY, which might facilitate the phosphotransfer reaction by tethering CheY in close proximity to the phosphodonor located in P1. To explore the contribution of P2 to the CheA --> CheY phosphotransfer reaction in the Escherichia coli chemotaxis system, we examined the transfer kinetics of a mutant CheA protein (CheADeltaP2) in which the 98 amino acid P2 domain had been replaced with an 11 amino acid linker. We used rapid-quench and stopped-flow fluorescence experiments to monitor phosphotransfer to CheY from phosphorylated wild-type CheA and from phosphorylated CheADeltaP2. The CheADeltaP2 reaction rates were significantly slower and the K(m) value was markedly higher than the corresponding values for wild-type CheA. These results indicate that binding of CheY to the P2 domain of CheA indeed contributes to the rapid kinetics of phosphotransfer. Although phosphotransfer was slower with CheADeltaP2 (k(cat)/K(m) approximately 1.5 x 10(6) M(-)(1) s(-)(1)) than with wild-type CheA (k(cat)/K(m) approximately 10(8) M(-)(1) s(-)(1)), it was still orders of magnitude faster than the kinetics of CheY phosphorylation by phosphoimidazole and other small molecule phosphodonors (k(cat)/K(m) approximately 5-50 M(-)(1) s(-)(1)). We conclude that the P1 domain of CheA also makes significant contributions to phosphotransfer rates in chemotactic signaling.     

Two-domain arginine kinase from the deep-sea clam Calyptogena kaikoi--evidence of two active domains

The cDNA and deduced amino acid sequences for arginine kinase (AK) from the deep-sea clam Calyptogena kaikoi have been determined revealing an unusual two-domain (2D) structure with molecular mass of 80 kDa, twice that of normal AK. The amino acid sequences of both domains contain most of the residues thought to be required for substrate binding found in the horseshoe crab Limulus polyphemus AK, a well studied system for which several X-ray crystal structures exist. However, two highly conserved residues, D62 and R193, that form a salt bridge thereby stabilizing the substrate-bound structure have been replaced by G and N in domain 1, and G and P in domain 2, respectively. The present effort probes whether both domains of Calyptogena AK are catalytically competent. Recombinant constructs of the wild-type enzyme of both single domains, and of selected mutants of the Calyptogena AK have been expressed as fusion proteins with the maltose-binding protein. The wild-type two-domain enzyme (2D[WT]) had high AK activity (k(cat)=23 s(- 1), average value of the two domains), and the single domain 2 (D2[WT]) showed 1.5-times higher activity (k(cat)=38 s(- 1)) than the wild-type 2D[WT]. Interestingly, the single domain 1 (D1[WT]) showed only a very low activity (k(cat) approximately 0.016 s(- 1)). Introduction of a Y68A mutation in both domains virtually abolished catalytic activity. On the other hand, significant residual activity was observed (k(cat)=2.8 s(- 1)), when the Y68A mutation was introduced only into domain 2 of the two-domain enzyme. A similar mutation in domain 1 of the two-domain enzyme reduced activity to a much lower extent (k(cat)=11.1 s(- 1)). Although the domains of this "contiguous" dimeric AK each have catalytic capabilities, the presence of domain 2 strongly influences the stability and activity of domain 1.     

Sterol methyltransferase2: purification, properties, and inhibition

Expression of the Arabidopsis sterol methyltransferase2 (SMT2) cDNA in Escherichia coli yields a native protein, when purified to homogeneity, has the predicted molecular mass ca. 40 kDa on SDS-PAGE and recognizes native sterols synthesized by Arabidopsis with a Delta(24(25))-bond (cycloartenol; K(m) 35 microM and k(cat) 0.001s(-1)) and Delta(24(28))-bond (24(28)-methylenelophenol; K(m) 28 microM and k(cat) 0.01 s(-1)). Cycloartenol was converted to a single olefinic product-24(28)-methylenecycloartanol whereas 24(28)-methylenelophenol was converted to a mixture of three stereochemically related products with the Delta(24(28))Z-ethylidene, Delta(24(28))E-ethylidene, and Delta(25(27))-24 beta-ethyl side chains. Structural determinants essential to activity were the nucleophilic features at C-3 and C-24. The double bond position in the sterol substrate influenced catalytic efficiency according to the order: side chain, Delta(24(24))相似文献   

Biochemical evidence for an editing role of thioesterase II in the biosynthesis of the polyketide pikromycin

The pikromycin biosynthetic gene cluster contains the pikAV gene encoding a type II thioesterase (TEII). TEII is not responsible for polyketide termination and cyclization, and its biosynthetic role has been unclear. During polyketide biosynthesis, extender units such as methylmalonyl acyl carrier protein (ACP) may prematurely decarboxylate to generate the corresponding acyl-ACP, which cannot be used as a substrate in the condensing reaction by the corresponding ketosynthase domain, rendering the polyketide synthase module inactive. It has been proposed that TEII may serve as an "editing" enzyme and reactivate these modules by removing acyl moieties attached to ACP domains. Using a purified recombinant TEII we have tested this hypothesis by using in vitro enzyme assays and a range of acyl-ACP, malonyl-ACP, and methylmalonyl-ACP substrates derived from either PikAIII or the loading didomain of DEBS1 (6-deoxyerythronolide B synthase; AT(L)-ACP(L)). The pikromycin TEII exhibited high K(m) values (>100 microm) with all substrates and no apparent ACP specificity, catalyzing cleavage of methylmalonyl-ACP from both AT(L)-ACP(L) (k(cat)/K(m) 3.3 +/- 1.1 m(-1) s(-1)) and PikAIII (k(cat)/K(m) 2.9 +/- 0.9 m(-1) s(-1)). The TEII exhibited some acyl-group specificity, catalyzing hydrolysis of propionyl (k(cat)/K(m) 15.8 +/- 1.8 m(-1) s(-1)) and butyryl (k(cat)/K(m) 17.5 +/- 2.1 m(-1) s(-1)) derivatives of AT(L)-ACP(L) faster than acetyl (k(cat)/K(m) 4.9 +/- 0.7 m(-1) s(-1)), malonyl (k(cat)/K(m) 3.9 +/- 0.5 m(-1) s(-1)), or methylmalonyl derivatives. PikAIV containing a TEI domain catalyzed cleavage of propionyl derivative of AT(L)-ACP(L) at a dramatically lower rate than TEII. These results provide the first unequivocal in vitro evidence that TEII can hydrolyze acyl-ACP thioesters and a model for the action of TEII in which the enzyme remains primarily dissociated from the polyketide synthase, preferentially removing aberrant acyl-ACP species with long half-lives. The lack of rigorous substrate specificity for TEII may explain the surprising observation that high level expression of the protein in Streptomyces venezuelae leads to significant (>50%) titer decreases.     

A rearranging ligand enables allosteric control of catalytic activity in copper-containing nitrite reductase

In Cu-containing nitrite reductase from Alcaligenes faecalis S-6 the axial methionine ligand of the type-1 site was replaced (M150G) to make the copper ion accessible to external ligands that might affect the enzyme's catalytic activity. The type-1 site optical spectrum of M150G (A(460)/A(600)=0.71) differs significantly from that of the native nitrite reductase (A(460)/A(600)=1.3). The midpoint potential of the type-1 site of nitrite reductase M150G (E(M)=312(+/-5)mV versus hydrogen) is higher than that of the native enzyme (E(M)=213(+/-5)mV). M150G has a lower catalytic activity (k(cat)=133(+/-6)s(-1)) than the wild-type nitrite reductase (k(cat)=416(+/-10)s(-1)). The binding of external ligands to M150G restores spectral properties, midpoint potential (E(M)<225mV), and catalytic activity (k(cat)=374(+/-28)s(-1)). Also the M150H (A(460)/A(600)=7.7, E(M)=104(+/-5)mV, k(cat)=0.099(+/-0.006)s(-1)) and M150T (A(460)/A(600)=0.085, E(M)=340(+/-5)mV, k(cat)=126(+/-2)s(-1)) variants were characterized. Crystal structures show that the ligands act as allosteric effectors by displacing Met62, which moves to bind to the Cu in the position emptied by the M150G mutation. The reconstituted type-1 site has an otherwise unaltered geometry. The observation that removal of an endogenous ligand can introduce allosteric control in a redox enzyme suggests potential for structural and functional flexibility of copper-containing redox sites.     

Specificity of natural and artificial substrates for human Cdc25A

Cdc25A is a dual-specific protein phosphatase involved in the regulation of the kinase activity of Cdk-cyclin complexes in the eukaryotic cell cycle. To understand the mechanism of this important regulator, we have generated highly purified biochemical reagents to determine the kinetic constants for human Cdc25A with respect to a set of peptidic, artificial, and natural substrates. Cdc25A and its catalytic domain (dN25A) demonstrate very similar kinetics toward the artificial substrates p-nitrophenyl phosphate (k(cat)/K(m) = 15-25 M(-1) s(-1)) and 3-O-methylfluorescein phosphate (k(cat)/K(m) = 1.1-1.3 x 10(4) M(-1) s(-1)). Phospho-peptide substrates exhibit extremely low second-order rate constants and a flat specificity profile toward Cdc25A and dN25A (k(cat)/K(m) = 1 to 10 M(-1) s(-1)). In contrast to peptidic substrates, Cdc25A and dN25A are highly active phosphatases toward the natural substrate, T14- and Y15-bis-phosphorylated Cdk2/CycA complex (Cdk2-pTpY/CycA) with k(cat)/K(m) values of 1.0-1.1 x 10(6) M(-1) s(-1). In the context of the Cdk2-pTpY/CycA complex, phospho-threonine is preferred over phospho-tyrosine by more than 10-fold. The highly homologous catalytic domain of Cdc25c is essentially inactive toward Cdk2-pTpY/CycA. Taken together these data indicate that a significant degree of the specificity of Cdc25 toward its Cdk substrate resides within the catalytic domain itself and yet is in a region(s) that is outside the phosphate binding site of the enzyme.     

Two rate-limiting steps in the kinetic mechanism of the serine/threonine specific protein kinase ERK2: a case of fast phosphorylation followed by fast product release

Extracellular regulated protein kinase 2 (ERK2) is a eukaryotic protein kinase whose activity is regulated by mitogenic stimuli. To gain insight into the catalytic properties of ERK2 and to complement structure-function studies, we undertook a pre-steady state kinetic analysis of the enzyme. To do this, ERK2 was quantitatively activated by MAPKK1 in vitro by monitoring the stoichiometry and site specificity of phosphorylation using a combination of protein mass spectrometry, tryptic peptide analysis, and (32)P radiolabeling. Using a quench-flow apparatus, MgATP(2-) was rapidly mixed (<1 ms) with both ERK2 and the protein substrate EtsDelta138 in the presence of a saturating total concentration (20 mM) of magnesium ion at 27 degrees C and pH 7.5. An exponential burst of product was observed over the first few milliseconds that followed mixing. This burst had an amplitude alpha of 0.44 and was followed by a slower linear phase. The pre-steady state burst is consistent with two partially rate-limiting enzymatic steps, which have the following rate constants: k(2) = 109 +/- 9 s(-1) and k(3) = 56 +/- 4 s(-1). These are attributed to rapid phosphorylation of EtsDelta138 and the process of product release, respectively. Single-turnover experiments provided an independent determination of k(2) (106 +/- 25 s(-1)). The observed catalytic constant (k(cat)(obs)) was found to be sensitive to the concentration of ERK2. The data fit a model in which ERK2 monomers form dimers and suggest that both the monomeric and dimeric forms of ERK2 are active with catalytic constants (k(cat)) of 25 and 37 s(-1), respectively. In addition, the model suggests that in the presence of saturating concentrations of both magnesium and substrates ERK2 subunits dissociate with a dissociation constant (K(d)) of 32 +/- 16 nM.     

Evaluation of the catalytic mechanism of the p21-activated protein kinase PAK2

The p21-activated kinases (PAKs) play important roles in diverse cellular processes. In the present study, we provide an in-depth kinetic analysis of one of the PAK family members, PAK2, in phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate derived from LIM kinase, LIMKtide. Steady-state kinetic analysis of the initial reaction velocity of PAK2 phosphorylation of MBP is consistent with both randomly and compulsorily ordered mechanisms. Further kinetic studies carried out in various concentrations of sucrose revealed that solvent viscosities had no effect on k(cat)/K(m) for either ATP or MBP while k(cat) was highly sensitive to solvent viscosity, indicating that the enzymatic phosphorylation by PAK2 can be best interpreted by a rapid-equilibrium random bi-bi reaction model, and k(cat) is partially limited by both phosphoryl group transfer (31 s(-)(1)) and the product release (19 s(-)(1)). In the phosphorylation of LIMKtide, both k(cat) and k(cat)/K(m) were insensitive to solvent viscosity, and the product release (86 s(-)(1)) was much faster than the phosphoryl group transfer step (19 s(-)(1)). These studies suggest that the release of phospho-MBP product is likely partially rate determining for the PAK2-catalyzed reaction since the dissociation rate of products from the PAK2 active site for LIMKtide phosphorylation differs from that of MBP significantly. Such a mechanism is in contrast to the previously established kinetics for the phosphorylation of peptide substrates by cAMP-dependent kinase, in which this process is limited by the release of ADP but not the phospho-peptide product. These results complement previous structure-function studies of PAKs and provide important insight for mechanistic interpretation of the kinase functions.     

A stopped flow transient kinetic analysis of substrate binding and catalysis in Escherichia coli D-3-phosphoglycerate dehydrogenase

Pre-steady state, stopped flow analysis of Escherichia coli D-3-phosphoglycerate dehydrogenase was performed by following the fluorescence of protein tryptophan and the fluorescence resonance energy transfer from protein tryptophan to bound NADH. The results indicate that binding of substrates is ordered, with coenzyme, NADH, binding first. Furthermore, the analysis indicated that there are two sets of sites on the tetrameric enzyme that can be differentiated by their kinetic behavior. NADH binding was consistent with an initial binding event followed by a slow conformational change for each site. The slow conformational change is responsible for the apparent tight binding of NADH to the apoenzyme but is too slow to participate in the catalytic cycle when the enzyme is rapidly turning over. Subsequent binding of the substrate, alpha-ketoglutarate, was characterized by a rapid equilibrium binding event followed by a conformational change for each site. Catalysis in the direction of NAD(+) reduction showed a distinct burst of activity followed by a slow rate of turnover, indicating that the rate-limiting step is after hydride transfer. Catalysis in the direction of NADH oxidation did not display burst kinetics, indicating that the rate-limiting step is at or before the hydride transfer step. The burst data indicated that the rate of NAD(+) reduction (3.8 s(-1)) is similar to the k(cat) of the enzyme (2-3 s(-1)) in that direction. However, analysis of the reaction with deuterated NADH failed to show an effect on the velocity of the reaction with a V(H)/V(D)=1.07+/-0.06. None of the other rates determined by stopped flow analysis could account for the k(cat) of the enzyme in either direction (forward k(cat)=0.01 s(-1), reverse k(cat)=2-3 s(-1)), suggesting that the rate-limiting step in both directions is a conformational change in the enzyme that is not detected optically.     

YjeQ,an essential,conserved, uncharacterized protein from Escherichia coli,is an unusual GTPase with circularly permuted G-motifs and marked burst kinetics

The Escherichia coli protein YjeQ represents a protein family whose members are broadly conserved in bacteria and have been shown to be indispensable to the growth of E. coli and Bacillus subtilis [Arigoni, F., et al. (1998) Nat. Biotechnol. 16, 851]. Proteins of the YjeQ family contain all sequence motifs typical of the vast class of P-loop-containing GTPases, but show a circular permutation, with a G4-G1-G3 pattern of motifs as opposed to the regular G1-G3-G4 pattern seen in most GTPases. All YjeQ family proteins display a unique domain architecture, which includes a predicted N-terminal OB-fold RNA-binding domain, the central permuted GTPase module, and a zinc knuckle-like C-terminal cysteine cluster. This domain architecture suggests a possible role for YjeQ as a regulator of translation. YjeQ was overexpressed, purified to homogeneity, and shown to contain 0.6 equiv of GDP. Steady state kinetic analyses indicated slow GTP hydrolysis, with a k(cat) of 9.4 h(-)(1) and a K(m) for GTP of 120 microM (k(cat)/K(m) = 21.7 M(-)(1) s(-)(1)). YjeQ also hydrolyzed other nucleoside triphosphates and deoxynucleotide triphosphates such as ATP, ITP, and CTP with specificity constants (k(cat)/K(m)) ranging from 0.2 to 1.0 M(-)(1) s(-)(1). Pre-steady state kinetic analysis of YjeQ revealed a burst of nucleotide hydrolysis for GTP described by a first-order rate constant of 100 s(-)(1) as compared to a burst rate of 0.2 s(-)(1) for ATP. In addition, a variant in the G1 motif of YjeQ (S221A) was substantially impaired for GTP hydrolysis (0.3 s(-)(1)) with a less significant impact on the steady state rate (1.8 h(-)(1)). In summary, E. coli YjeQ is an unusual, circularly permuted P-loop-containing GTPase, which catalyzes GTP hydrolysis at a rate 45 000 times greater than that of turnover.     

Assay for glucose oxidase from Aspergillus niger and Penicillium amagasakiense by Fourier transform infrared spectroscopy

A simple and direct assay method for glucose oxidase (EC 1.1.3.4) from Aspergillus niger and Penicillium amagasakiense was investigated by Fourier transform infrared spectroscopy. This enzyme catalyzed the oxidation of d-glucose at carbon 1 into d-glucono-1,5-lactone and hydrogen peroxide in phosphate buffer in deuterium oxide ((2)H(2)O). The intensity of the d-glucono-1,5-lactone band maximum at 1212 cm(-1) due to CO stretching vibration was measured as a function of time to study the kinetics of d-glucose oxidation. The extinction coefficient epsilon of d-glucono-1,5-lactone was determined to be 1.28 mM(-1)cm(-1). The initial velocity is proportional to the enzyme concentration by using glucose oxidase from both A. niger and P. amagasakiense either as cell-free extracts or as purified enzyme preparations. The kinetic constants (V(max), K(m), k(cat), and k(cat)/K(m)) determined by Lineweaver-Burk plot were 433.78+/-59.87U mg(-1) protein, 10.07+/-1.75 mM, 1095.07+/-151.19s(-1), and 108.74 s(-1)mM(-1), respectively. These data are in agreement with the results obtained by a spectrophotometric method using a linked assay based on horseradish peroxidase in aqueous media: 470.36+/-42.83U mg(-1) protein, 6.47+/-0.85 mM, 1187.77+/-108.16s(-1), and 183.58 s(-1)mM(-1) for V(max), K(m), k(cat), and k(cat)/K(m), respectively. Therefore, this spectroscopic method is highly suited to assay for glucose oxidase activity and its kinetic parameters by using either cell-free extracts or purified enzyme preparations with an additional advantage of performing a real-time measurement of glucose oxidase activity.     

Purification and characterization of VanXY(C), a D,D-dipeptidase/D,D-carboxypeptidase in vancomycin-resistant Enterococcus gallinarum BM4174.

VanXY(C), a bifunctional enzyme from VanC-phenotype Enterococcus gallinarum BM4174 that catalyses D,D-peptidase and D,D-carboxypeptidase activities, was purified as the native protein, as a maltose-binding protein fusion and with an N-terminal tag containing six histidine residues. The kinetic parameters of His(6)-VanXY(C) were measured for a variety of precursors of peptidoglycan synthesis involved in resistance: for D-Ala-D-Ala, the K(m) was 3.6 mm and k(cat), 2.5 s(-1); for UDP-MurNAc-L-Ala-D-Glu-L-Lys-DAla-D-Ala (UDP-MurNAc-pentapeptide[Ala]), K(m) was 18.8 mm and k(cat) 6.2 s(-1); for D-Ala-D-Ser, K(m) was 15.5 mm and k(cat) 0.35 s(-1). His(6)-VanXYC was inactive against the peptidoglycan precursor UDP-MurNAc-L-Ala-D-Glu-L-Lys-D-Ala-D-Ser (UDP-MurNAc-pentapeptide[Ser]). The rate of hydrolysis of the terminal D-Ala of UDP-MurNAc-pentapeptide[Ala] was inhibited 30% by 2 mm D-Ala-D-Ser or UDP-MurNAc-pentapeptide[Ser]. Therefore preferential hydrolysis of substrates terminating in D-Ala would occur during peptidoglycan synthesis in E. gallinarum BM4174, leaving precursors ending in D-Ser with a lower affinity for glycopeptides to be incorporated into peptidoglycan.Mutation of an aspartate residue (Asp59) of His-tagged VanXY(C) corresponding to Asp68 in VanX to Ser or Ala, resulted in a 50% increase and 73% decrease, respectively, of the specificity constant (k(cat)/K(m)) for D-Ala-D-Ala. This situation is in contrast to VanX in which mutation of Asp68-->Ala produced a greater than 200,000-fold decrease in the substrate specificity constant. This suggests that Asp59, unlike Asp68 in VanX, does not have a pivotal role in catalysis.     

Independent intramolecular mediators of folding, activity, and inhibition for the Plasmodium falciparum cysteine protease falcipain-2

The Plasmodium falciparum cysteine protease falcipain-2 is a trophozoite hemoglobinase and potential antimalarial drug target. Unlike other studied papain family proteases, falcipain-2 does not require its prodomain for folding to active enzyme. Rather, folding is mediated by an amino-terminal extension of the mature protease. As in related enzymes, the prodomain is a potent inhibitor of falcipain-2. We now report further functional evaluation of the domains of falcipain-2 and related plasmodial proteases. The minimum requirement for folding of falcipain-2 and four related plasmodial cysteine proteases was inclusion of a 14-15-residue amino-terminal folding domain, beginning with a conserved Tyr. Chimeras of the falcipain-2 catalytic domain with extensions from six other plasmodial proteases folded normally and had kinetic parameters (k(cat)/K(m) 124,000-195,000 M(-1) s(-1)) similar to those of recombinant falcipain-2 (k(cat)/K(m) 120,000 M(-1) s(-1)), indicating that the folding domain is functionally conserved across the falcipain-2 subfamily. Correct folding also occurred when the catalytic domain was refolded with a separate prodomain-folding domain construct but not with an isolated folding domain peptide. Thus, the prodomain mediated interaction between the other two domains when they were not covalently bound. The prodomain-catalytic domain interaction was independent of the active site, because it was blocked by free inactive catalytic domain but not by the active site-binding peptide leupeptin. The folded catalytic domain retained activity after purification from the prodomain-folding domain construct (k(cat)/K(m) 168,000 M(-1) s(-1)), indicating that the folding domain is not required for activity once folding has been achieved. Activity was lost after nonreducing gelatin SDS-PAGE but not native gelatin PAGE, indicating that correct disulfide bonds are insufficient to direct appropriate folding. Our results identify unique features of the falcipain-2 subfamily with independent mediation of activity, folding, and inhibition.     

Substrate-based design of reversible Pin1 inhibitors

Human Pin1, a peptidyl-prolyl cis/trans isomerase with high specificity to -Ser/Thr(PO(3)H(2))-Pro- motifs, is required for cell cycle progression. In an effort to design reversible Pin1 inhibitors by using a substrate structure based approach, a panel of peptides were applied to systematically analyze the minimal structural requirements for Pin1 substrate recognition. Pin1 catalysis (k(cat)/K(m) < 5 mM(-1) s(-1)) for Ala-Pro, Ser-Pro, and Ser(PO(3)H(2))-Pro was detected using direct UV-visible spectrophotometric detection of prolyl isomerization, while weak competitive inhibition of Pin1 by these dipeptides was observed (K(i) > 1 mM). Substrates with chain lengths extending from either the P2 to P1' or the P1 to P2' subsite gave k(cat)/K(m) values of 100 mM(-1) s(-1) for Ala-Ser(PO(3)H(2))-Pro and 38 mM(-1) s(-1) for Ser(PO(3)H(2))-Pro-Arg. For both Pin1 and its yeast homologue Ess1, the optimal subsite recognition elements comprise five amino acid residues with the essential Ser(PO(3)H(2)) in the middle position. The resulting substrate Ac-Ala-Ala-Ser(PO(3)H(2))-Pro-Arg-NH-4-nitroanilide possesses a very low cis/trans interconversion barrier in the presence of either Pin1 or Ess1, with k(cat)/K(m) = 9300 mM(-1) s(-1) and 12000 mM(-1) s(-1), respectively. The D-Ser(PO(3)H(2)) residue preceding proline could serve as a substrate-deactivating determinant without compromising ground state affinity. Similarly, substitution of the amide bond preceding proline with a thioxo amide bond produces a potent inhibitor. Pin1 is reversibly inhibited by such substrate analogue inhibitors with IC(50) values in the low micromolar range. The D-amino acid containing inhibitor also exhibits remarkable stability against phosphatase activity in cell lysate.     

An uniquely purified HCV NS3 protease and NS4A(21-34) peptide form a highly active serine protease complex in peptide hydrolysis.

The N-terminal domain of the hepatitis C virus (HCV) polyprotein containing the NS3 protease (residues 1027 to 1206) was expressed in Escherichia coli as a soluble protein under the control of the T7 promoter. The enzyme has been purified to homogeneity with cation exchange (SP-Sepharose HR) and heparin affinity chromatography in the absence of any detergent. The purified enzyme preparation was soluble and remained stable in solution for several weeks at 4 degrees C. The proteolytic activity of the purified enzyme was examined, also in the absence of detergents, using a peptide mimicking the NS4A/4B cleavage site of the HCV polyprotein. Hydrolysis of this substrate at the expected Cys-Ala scissile bond was catalyzed by the recombinant protease with a pseudo second-order rate constant (k(cat)/K(M)) of 205 and 196,000 M(-1) s(-1), respectively, in the absence and presence of a central hydrophobic region (sequence represented by residues 21 to 34) of the NS4A protein. The rate constant in the presence of NS4A peptide cofactor was two orders of magnitude greater than reported previously for the NS3 protease domain. A significantly higher activity of the NS3 protease-NS4A cofactor complex was also observed with a substrate mimicking the NS4B/5A site (k(cat)/K(M) of 5180 +/- 670 M(-1) s(-1)). Finally, the optimal formation of a complex between the NS3 protease domain and the cofactor NS4A was critical for the high proteolytic activity observed.     

Effect of Calcium Ions on Enteropeptidase Catalysis

The effects of calcium ions on hydrolysis of low molecular weight substrates catalyzed by different forms of enteropeptidase were studied. A method for determining activity of truncated enteropeptidase preparations lacking a secondary trypsinogen binding site and displaying low activity towards trypsinogen was developed using N-alpha-benzyloxycarbonyl-L-lysine thiobenzyl ester (Z-Lys-S-Bzl). The kinetic constants for hydrolysis of this substrate at pH 8.0 and 25 degrees C were determined for natural enteropeptidase (K(m) 59.6 microM, k(cat) 6660 min(-1), k(cat)/K(m) 111 microM(-1) x min(-1)), as well as for enteropeptidase preparation with deleted 118-783 fragment of the heavy chain (K(m) 176.9 microM, k(cat) 6694 min(-1), k(cat)/K(m) 37.84 microM(-1) x min(-1)) and trypsin (K(m) 56.0 microM, k(cat) 8280 min(-1), k(cat)/K(m) 147.86 microM(-1) x min(-1)). It was shown that the enzymes with trypsin-like primary active site display similar hydrolysis efficiency towards Z-Lys-S-Bzl. Calcium ions cause 3-fold activation of hydrolysis of the substrates of general type GD(4)K-X by the natural full-length enteropeptidase. In contrast, the hydrolysis of substrates with one or two Asp/Glu residues at P2-P3 positions is slightly inhibited by Ca2+. In the case of enteropeptidase light chain as well as the enzyme containing the truncated heavy chain (466-800 fragment), the activating effect of calcium ions was not detected for all the studied substrates. The results of hydrolysis experiments with synthetic enteropeptidase substrates GD(4)K-F(NO(2))G, G(5)DK-F(NO(2))G (where F(NO(2)) is p-nitrophenyl-L-phenylalanine residue), and GD(4)K-Nfa (where Nfa is beta-naphthylamide) demonstrate the possibility of regulation of undesired side hydrolysis using natural full-length enteropeptidase for processing chimeric proteins by means of calcium ions.     

A structure-based site-directed mutagenesis study on the neurolysin (EC 3.4.24.16) and thimet oligopeptidase (EC 3.4.24.15) catalysis

Neurolysin (EP24.16) and thimet oligopeptidase (EP24.15) are closely related metalloendopeptidases. Site-directed mutagenesis of Tyr(613) (EP24.16) or Tyr(612) (EP24.15) to either Phe or Ala promoted a strong reduction of k(cat)/K(M) for both enzymes. These data suggest the importance of both hydroxyl group and aromatic ring at this specific position during substrate hydrolysis by these peptidases. Furthermore, the EP24.15 A607G mutant showed a k(cat)/K(M) of 2x10(5) M(-1) s(-1) for the Abz-GFSIFRQ-EDDnp substrate, similar to that of EP24.16 (k(cat)/K(M)=3x10(5) M(-1) s(-1)) which contains Gly at the corresponding position; the wild type EP24.15 has a k(cat)/K(M) of 2.5x10(4) M(-1) s(-1) for this substrate.     

Reaction mechanism for mammalian pyruvate dehydrogenase using natural lipoyl domain substrates

The pyruvate dehydrogenase (E1) component of the pyruvate dehydrogenase complex (PDC) catalyzes a two-step reaction. Recombinant production of substrate amounts of the lipoyl domains of the dihydrolipoyl transacetylase (E2) component of the mammalian PDC allowed kinetic characterization of the rapid physiological reaction catalyzed by E1. Using either the N-terminal (L1) or the internal (L2) lipoyl domain of E2 as a substrate, analyses of steady state kinetic data support a ping pong mechanism. Using standard E1 preparations, Michaelis constants (Km) were 52 +/- 14 microM for L1 and 24.8 +/- 3.8 microM for pyruvate and k(cat) was 26.3 s(-1). With less common, higher activity preparations of E1, the Km values were > or =160 microM for L1 and > or =35 microM for pyruvate and k(cat) was > or =70 s(-1). Similar results were found with the L2 domain. The best synthetic lipoylated-peptide (L2 residues 163-177) was a much poorer substrate (Km > or =15 mM, k(cat) approximately equals 5 s(-1); k(cat)/Km decreased >1,500-fold) than L1 or L2, but a far better substrate in the E1 reaction than free lipoamide (k(cat)/Km increased >500-fold). Each lipoate source was an effective substrate in the dihydrolipoyl dehydrogenase (E3) reaction, but E3 had a lower Km for the L2 domain than for lipoamide or the lipoylated peptides. In contrast to measurements with slow E1 model reactions that use artificial acceptors, we confirmed that the natural E1 reaction, using lipoyl domain acceptors, was completely inhibited (>99%) by phosphorylation of E1 and the phosphorylation strongly inhibited the reverse of the second step catalyzed by E1. The mechanisms by which phosphorylation interferes with E1 activity is interpreted based on accrued results and the location of phosphorylation sites mapped onto the 3-D structure of related alpha-keto acid dehydrogenases.     

Kinetic mechanism of an aldehyde reductase of Saccharomyces cerevisiae that relieves toxicity of furfural and 5-hydroxymethylfurfural

An effective means of relieving the toxicity of furan aldehydes, furfural (FFA) and 5-hydroxymethylfurfural (HMF), on fermenting organisms is essential for achieving efficient fermentation of lignocellulosic biomass to ethanol and other products. Ari1p, an aldehyde reductase from Saccharomyces cerevisiae, has been shown to mitigate the toxicity of FFA and HMF by catalyzing the NADPH-dependent conversion to corresponding alcohols, furfuryl alcohol (FFOH) and 5-hydroxymethylfurfuryl alcohol (HMFOH). At pH 7.0 and 25°C, purified Ari1p catalyzes the NADPH-dependent reduction of substrates with the following values (k(cat) (s(-1)), k(cat)/K(m) (s(-1)mM(-1)), K(m) (mM)): FFA (23.3, 1.82, 12.8), HMF (4.08, 0.173, 23.6), and dl-glyceraldehyde (2.40, 0.0650, 37.0). When acting on HMF and dl-glyceraldehyde, the enzyme operates through an equilibrium ordered kinetic mechanism. In the physiological direction of the reaction, NADPH binds first and NADP(+) dissociates from the enzyme last, demonstrated by k(cat) of HMF and dl-glyceraldehyde that are independent of [NADPH] and (K(ia)(NADPH)/k(cat)) that extrapolate to zero at saturating HMF or dl-glyceraldehyde concentration. Microscopic kinetic parameters were determined for the HMF reaction (HMF+NADPH?HMFOH+NADP(+)), by applying steady-state, presteady-state, kinetic isotope effects, and dynamic modeling methods. Release of products, HMFOH and NADP(+), is 84% rate limiting to k(cat) in the forward direction. Equilibrium constants, [NADP(+)][FFOH]/[NADPH][FFA][H(+)]=5600×10(7)M(-1) and [NADP(+)][HMFOH]/[NADPH][HMF][H(+)]=4200×10(7)M(-1), favor the physiological direction mirrored by the slowness of hydride transfer in the non-physiological direction, NADP(+)-dependent oxidation of alcohols (k(cat) (s(-1)), k(cat)/K(m) (s(-1)mM(-1)), K(m) (mM)): FFOH (0.221, 0.00158, 140) and HMFOH (0.0105, 0.000104, 101).