含磷酸结合口袋的BRCT结构域功能位点预测

BRCT( BRCA1 C-terminus)是真核生物DNA损伤修复系统重要的信号传导和蛋白靶向结构域.为了探讨含磷酸结合口袋的BRCT与磷酸化配体结合的机制,对XRCC1 BRCT1、PTIP BRCT4、ECT2 BRCT1和TopBP1BRCT1进行了结构保守性和表面静电势分析.结果显示,4个BRCT的磷酸结合口袋周围所存在的结构保守并带正电势的沟槽很可能是其功能位点,并且类似的沟槽在含磷酸结合口袋的BRCT中普遍存在.沟槽两侧及底部均带有极性氨基酸残基,两侧带正电荷,而底部疏水.这说明沟槽与配体的结合以静电和疏水相互作用为主.沟槽主要位于单个BRCT中,而且4个BRCT的沟槽在形状和电荷分布上都不同,说确明BRCT配体特异性主要由单个BRCT决定.磷酸结合口袋位于沟槽中心,说明沟槽可能同时结合磷酸化残基的N端和C端附近残基.     

(+)-CC-1065 as a structural probe of Mu transposase-induced bending of DNA: overcoming limitations of hydroxyl-radical footprinting.

Phage Mu transposase (A-protein) is primarily responsible for transposition of the Mu genome. The protein binds to six att sites, three at each end of Mu DNA. At most att sites interaction of a protein monomer with DNA is seen to occur over three minor and two consecutive major grooves and to result in bending up to about 90 degrees. To probe the directionality and locus of these A-protein-induced bends, we have used the antitumor antibiotic (+)-CC-1065 as a structural probe. As a consequence of binding within the minor groove, (+)-CC-1065 is able to alkylate N3 of adenine in a sequence selective manner. This selectivity is partially determined by conformational flexibility of the DNA sequence, and the covalent adduct has a bent DNA structure in which narrowing of the minor groove has occurred. Using this drug in experiments in which either gel retardation or DNA strand breakage are used to monitor the stability of the A-protein--DNA complex or the (+)-CC-1065 alkylation sites on DNA (att site L3), we have demonstrated that of the three minor grooves implicated in the interaction with A-protein, the peripheral two are 'open' or accessible to drug bonding following protein binding. These drug-bonding sites very likely represent binding at at least two A-protein-induced bending sites. Significantly, the locus of bending at these sites is spaced approximately two helical turns apart, and the bending is proposed to occur by narrowing of the minor groove of DNA. The intervening minor groove between these two peripheral sites is protected from (+)-CC-1065 alkylation. The results are discussed in reference to a proposed model for overall DNA bending in the A-protein att L3 site complex. This study illustrates the utility of (+)-CC-1065 as a probe for protein-induced bending of DNA, as well as for interactions of minor groove DNA bending proteins with DNA which may be masked in hydroxyl radical footprinting experiments.     

Binding of two zinc finger nuclease monomers to two specific sites is required for effective double-strand DNA cleavage

Custom-designed zinc finger nucleases (ZFNs) are becoming powerful tools in gene targeting-the process of replacing a gene within a genome by homologous recombination. Here, we have studied the DNA cleavage by one such ZFN, DeltaQNK-FN, in order to gain insight into how ZFNs cleave DNA and how two inverted sites promote double-strand cleavage. DNA cleavage by DeltaQNK-FN is greatly facilitated when two DeltaQNK-binding sites are close together in an inverted orientation. Substrate cleavage was not first order with respect to the concentration of DeltaQNK-FN, indicating that double-strand cleavage requires dimerization of the FokI cleavage domain. Rates of DNA cleavage decrease as the substrate concentrations increase, suggesting that the DeltaQNK-FN molecules are effectively "trapped" in a 1:1 complex on DNA when the DNA is in excess. The physical association of two ZFN monomers on DNA was monitored by using the biotin-pull-down assay, which showed that the formation of DeltaQNK-FN active complex required both binding of the two DeltaQNK-FN molecules to specific DNA sites and divalent metal ions.     

Structural organization of Staf-DNA complexes

The transactivator Staf, which contains seven contiguous zinc fingers of the C₂-H₂ type, exerts its effects on gene expression by binding to specific targets in vertebrate small nuclear RNA (snRNA) and snRNA-type gene promoters. Here, we have investigated the interaction of the Staf zinc finger domain with the optimal Xenopus selenocysteine tRNA (xtRNA^Sec) and human U6 snRNA (hU6) Staf motifs. Generation of a series of polypeptides containing increasing numbers of Staf zinc fingers tested in binding assays, by interference techniques and by binding site selection served to elucidate the mode of interaction between the zinc fingers and the Staf motifs. Our results provide strong evidence that zinc fingers 3–6 represent the minimal zinc finger region for high affinity binding to Staf motifs. Furthermore, we show that the binding of Staf is achieved through a broad spectrum of close contacts between zinc fingers 1–6 and xtRNA^Sec or optimal sites or between zinc fingers 3–6 and the hU6 site. Extensive DNA major groove contacts contribute to the interaction with Staf that associates more closely with the non-template than with the template strand. Based on these findings and the structural information provided by the solved structures of other zinc finger–DNA complexes, we propose a model for the interaction between Staf zinc fingers and the xtRNA^Sec, optimal and hU6 sites.     

Critical DNA binding interactions of the insulator protein CTCF: a small number of zinc fingers mediate strong binding, and a single finger-DNA interaction controls binding at imprinted loci

The DNA-binding protein CTCF (CCCTC binding factor) mediates enhancer blocking insulation at sites throughout the genome and plays an important role in regulating allele-specific expression at the Igf2/H19 locus and at other imprinted loci. Evidence is also accumulating that CTCF is involved in large scale organization of genomic chromatin. Although CTCF has 11 zinc fingers, we show here that only 4 of these are essential to strong binding and that they recognize a core 12-bp DNA sequence common to most CTCF sites. By deleting individual fingers and mutating individual sites, we determined the orientation of binding. Furthermore, we were able to identify the specific finger and its point of DNA interaction that are responsible for the loss of CTCF binding when CpG residues are methylated in the imprinted Igf2/H19 locus. This single interaction appears to be critical for allele-specific binding and insulation by CTCF.     

Evolution of binding sites for zinc and calcium ions playing structural roles

The geometry of metal coordination by proteins is well understood, but the evolution of metal binding sites has been less studied. Here we present a study on a small number of well-documented structural calcium and zinc binding sites, concerning how the geometry diverges between relatives, how often nonrelatives converge towards the same structure, and how often these metal binding sites are lost in the course of evolution. Both calcium and zinc binding site structure is observed to be conserved; structural differences between those atoms directly involved in metal binding in related proteins are typically less than 0.5 A root mean square deviation, even in distant relatives. Structural templates representing these conserved calcium and zinc binding sites were used to search the Protein Data Bank for cases where unrelated proteins have converged upon the same residue selection and geometry for metal binding. This allowed us to identify six "archetypal" metal binding site structures: two archetypal zinc binding sites, both of which had independently evolved on a large number of occasions, and four diverse archetypal calcium binding sites, where each had evolved independently on only a handful of occasions. We found that it was common for distant relatives of metal-binding proteins to lack metal-binding capacity. This occurred for 13 of the 18 metal binding sites we studied, even though in some of these cases the original metal had been classified as "essential for protein folding." For most of the calcium binding sites studied (seven out of eleven cases), the lack of metal binding in relatives was due to point mutation of the metal-binding residues, whilst for zinc binding sites, lack of metal binding in relatives always involved more extensive changes, with loss of secondary structural elements or loops around the binding site.     

人造锌指蛋白的应用

C2H2锌指是真核细胞中最常见的DNA结合模体。由于C2H2锌指域靶位点特异性与结构和功能的模块性构成,使得C2H2锌指域成为构建特定的DNA结合蛋白的常用骨架。保持C2H2锌指的基本骨架不变,替换锌指特定位点的氨基酸残基,并融合表达其他功能域就可以得到具有靶向性的人造锌指蛋白(ZFP)。ZFP可以介导靶基因的转录调控,抑制或激活特定基因的表达与配体依赖的靶基因激活或抑制;对DNA进行修饰,如人造限制性内切酶,重组酶,整合酶;抗病毒感染等。因此,人造锌指蛋白应用前景广阔,研究价值显著,是未来人类基因治疗的革命性的工具。     

Cooperative, non-specific binding of a zinc finger peptide to DNA.

The DNA binding and structural properties of Xfin-31 (Lee, M.S., Gippert, G.P., Soman, K.V., Case, D.A. and Wright, P.E., 1989, Science 245, 635-637), a twenty five amino acid zinc finger peptide, in the reduced, oxidized and zinc complex forms, as well as the fourteen residue helical segment of the zinc finger (residues 12-25) have been compared using affinity coelectrophoresis (ACE) and circular dichroism (CD) spectroscopy. The zinc complex and oxidized peptides bind cooperatively to DNA although the cooperativity factor, omega, is more than 15-fold greater for the zinc complex. The reduced peptide in the absence of zinc and the helical segment do not bind cooperatively (omega = 1). Hence, the binding constant for singly contiguous sites (K omega) ranges over 100-fold for the various peptides even though the intrinsic binding constants (K) are similar. An increase in binding order and affinity for the other forms of Xfin-31 is correlated with an increasing similarity of the CD spectrum to that of the Xfin-31 zinc complex. The surprising DNA binding activity of the oxidized peptide may result from hydrophobic interactions between the amino-terminal loop formed by the Cys3-Cys6 disulfide bond and conserved hydrophobic residues in the carboxyl-terminal segment. Xfin-31 may be a particularly useful model for studying several poorly understood aspects of cooperative, non-specific DNA binding since it is small, has a stable, well-defined structure, and structures of zinc fingers bound to DNA have been determined.     

Characterization of interaction between DNA and 4',6-diamidino-2-phenylindole by optical spectroscopy

We have examined the interaction between 4',6-diamidino-2-phenylindole (DAPI) and DNA using flow linear dichroism (LD), circular dichroism (CD), and fluorescence techniques. We show the presence of two spectroscopically distinct binding sites at low binding ratios with saturation values of 0.025 and 0.17, respectively. In both sites DAPI is bound with its long axis approximately parallel to the grooves of the DNA helix. Resolution of CD spectra shows that an exciton component is present at higher binding ratios, which we attribute to the interaction of two accidentally close-lying DAPI molecules. We also find evidence that DAPI, at least in the high-affinity site, binds preferentially to AT-rich regions. From the spectroscopic results, supported by structural considerations, we can completely exclude that DAPI is bound to DNA by intercalation. Binding geometries and site densities are consistent with a location of DAPI in the grooves of DNA, with the high-affinity site most probably in the minor groove.     

GATA-1 bends DNA in a site-independent fashion

The DNA binding domain of GATA-1 consists of two adjacent homologous zinc fingers, of which only the C-terminal finger binds DNA independently. Solution structure studies have shown that the DNA is bent by about 15 degrees in the complex formed with the single C-terminal finger of GATA-1. The N-terminal finger stabilizes DNA binding at some sites. To determine whether it contributes to DNA bending, we have performed circular permutation DNA bending experiments with a variety of DNA-binding sites recognized by GATA-1. By using a series of full-length GATA-1, double zinc finger, and single C-terminal finger constructs, we show that GATA-1 bends DNA by about 24 degrees, irrespective of the DNA-binding site. We propose that the N- and C-terminal fingers of GATA-1 adopt different orientations when bound to different cognate DNA sites. Furthermore, we characterize circular permutation bending artifacts arising from the reduced gel mobility of the protein-DNA complexes.     

Effects of DNA binding of the zinc finger and linkers for domain fusion on the catalytic activity of sequence-specific chimeric recombinases determined by a facile fluorescent system

Artificial zinc finger proteins (ZFPs) consist of Cys(2)-His(2)-type modules composed of ～30 amino acids with a ββα structure that coordinates a zinc ion. ZFPs that recognize specific DNA target sequences can substitute for the binding domains of enzymes that act on DNA to create designer enzymes with programmable sequence specificity. The most studied of these engineered enzymes are zinc finger nucleases (ZFNs). ZFNs have been widely used to model organisms and are currently in human clinical trials with an aim of therapeutic gene editing. Difficulties with ZFNs arise from unpredictable mutations caused by nonhomologous end joining and off-target DNA cleavage and mutagenesis. A more recent strategy that aims to address the shortcomings of ZFNs involves zinc finger recombinases (ZFRs). A thorough understanding of ZFRs and methods for their modification promises powerful new tools for gene manipulation in model organisms as well as in gene therapy. In an effort to design efficient and specific ZFRs, the effects of the DNA binding affinity of the zinc finger domains and the linker sequence between ZFPs and recombinase catalytic domains have been assessed. A plasmid system containing ZFR target sites was constructed for evaluation of catalytic activities of ZFRs with variable linker lengths and numbers of zinc finger modules. Recombination efficiencies were evaluated by restriction enzyme analysis of isolated plasmids after reaction in Escherichia coli and changes in EGFP fluorescence in mammalian cells. The results provide information relevant to the design of ZFRs that will be useful for sequence-specific genome modification.