Evaluation of surface hydrophobicity of immobilized protein with a surface plasmon resonance sensor

Immobilization is widely used to isolate agglutinative and associative proteins with large hydrophobic surfaces. Surface hydrophobicities of immobilized proteins were quantified by measuring the adsorption amounts of Triton X-100 as a hydrophobic probe with a biosensor that utilizes the phenomena of surface plasmon resonance (SPR). We measured SPR signal changes derived from adsorption of Triton X-100 to five kinds proteins and calculated the monolayer adsorption capacity using the Brunauer-Emmett-Teller equation, partly modified with a term for correcting an influence of the net charge of immobilized protein. SPR signal changes obtained by this method correlated with the values of surface hydrophobicities obtained by conventional assay using a hydrophobic probe. Thus this measuring method using an SPR sensor and Triton X-100 is expected to be a tool for quantifying surface hydrophobicities of immobilized proteins.     

Theoretical Differential Phase Analysis for Characterization of Aqueous Solution Using Surface Plasmon Resonance

Surface plasmon resonance (SPR)-based differential phase analysis has been presented. Real as well as complex plane analysis of resonance parameters have been undertaken for the optimum selection of metal thicknesses in a bimetallic SPR configuration working under both angular and spectral regime. Theoretically, we can characterize the aqueous solution in terms of this differential phase variation due to the variation of sample parameters such as concentration and temperature. In this respect, two case studies, namely, concentration of hemoglobin in human blood and sensing of temperature of water have been demonstrated and proposed theoretically. By monitoring the change of differential phase, proposed approach leads to a very sensitive measurement of concentration and temperature.     

Measurements of the cross-bridge attachment/detachment process within intact sarcomeres by surface plasmon resonance.

We have developed a surface plasmon resonance (SPR) system to monitor the cross-bridge attachment/detachment process within intact sarcomeres from mouse heart muscle. SPR occurs when laser light energy is transferred to surface plasmons that are resonantly excited in a metal (gold) film. This resonance manifests itself as a minimum in the reflection of the incident laser light and occurs at a characteristic angle. The angle of the SPR occurrence depends on the dielectric permittivity of the sample medium adjacent to the gold film. Purified sarcomeric preparations are immobilized onto the gold film in the presence of a relaxing solution. Replacement of the relaxing solution with increasing Ca(2+) concentration solution activates the cross-bridge interaction and produces an increase in the SPR angle. These results imply that the interaction of myosin heads with actin within an intact sarcomere changes the dielectric permittivity of the sarcomeric structure. In addition, we further verify that SPR measurements can detect the changes in the population of the attached cross-bridges with altered concentrations of phosphate, 2,3-butanedione monoxime, or adenosine triphosphate at a fixed calcium concentration, which have been shown to reduce the force and increase the cross-bridge population in attached state. Thus, our data provide the first evidence that the SPR technique allows the monitoring of the cross-bridge attachment/detachment process within intact sarcomeres.     

Surface plamon resonance imaging of DNA based biosensors for potential applications in food analysis

The adsorption processes of oligonucleotides immobilised onto suitable photolithographic patterned gold substrates have been investigated in aqueous buffer solution by using a home made surface plasmon resonance (SPR) imaging equipment. A rapid self-assembled method for the construction of DNA chips to be used in SPR imaging experiments have been followed. The immobilised DNA molecules (probes) adopted in our SPR experiments anchored to a gold surface via thiol group were 5'thiol-modified containing a (CH(2))(15) tail. The hybridisation processes taking place with its complementary sequence have been observed and characterized by monitoring phenomena by a SPR imaging system. The two analysed oligonucleotides (probes and target) are of interest in plant gene biotechnological application and differing for the presence at the 5'-end of a poly T16 spacer. Dynamic investigation of smallest changes in SPR imaging pictures performed in liquid phase in the presence of DNA complementary probes have been performed. Quantitative information in terms of threshold of sensitivity has been extracted by using a specific images treatment.     

Comparative thermodynamic analysis of DNA--protein interactions using surface plasmon resonance and fluorescence correlation spectroscopy

We report a kinetic and thermodynamic analysis of interactions between ssDNA and replication protein A (RPA) using surface plasmon resonance (SPR) and fluorescence correlation spectroscopy (FCS) at variable temperature. The two methods yield different values for the Gibbs free energy but nearly the same value for the reaction enthalpy of ssDNA-RPA complex formation. The Gibbs free energy was determined by SPR and FCS to be -62.6 and -54.7 kJ/mol, respectively. The values for the reaction enthalpy are -64.4 and -66.5 kJ/mol. It is concluded that the difference in Gibbs free energy measured by the two methods is due to different reaction entropies. The entropic contribution to the free energy at 25 degrees C is -1.8 kJ/mol for SPR and -11.8 kJ/mol for FCS. In SPR, the reaction is restricted to two dimensions because of immobilization of the DNA molecules to the sensor surface. In contrast, FCS is able to follow complex formation without spatial restrictions. In consequence, the reaction entropy determined from SPR experiments is lower than for FCS experiments.     

Effect of Light Incident Angle on Fano Resonance Loss Mediation in Silver Nanoparticles Integrated Thin Silicon Wafers

In this work, we have studied the role of light incidence angle in the suppression of Fano resonance loss for mediating broadband light incoupling. At light normal incidence angle, the transmission loss of silver nanoparticles (Ag NPs) integrated 100 μm silicon (Si) wafer is reduced to ~?4 from ~?11%, and total reflectance is reduced to 32.7 from 38.7%. The reduction in reflectance is observed only in surface plasmon off-resonance region of the NPs, but the reflectance is enhanced slightly in surface plasmon resonance (SPR) region. With the change in light incident angles, we have observed a reduction in reflectance from NPs integrated silicon wafer at SPR region. At 40° light incident angle, the reflectance is reduced to 21 from 38.7% due to minimization of the Fano resonance in SPR region of the NPs. The Fano resonance loss reduction is explained based on modification in NPs’ dipole and quadrupole modes hybridization at the silicon interface with different light incident angles instead of normal incidence. Experimental observations are validated by simulating Ag NPs’ near-fields and angular distribution of far-fields at the silicon interface, scattering efficiency spectra at different light incident angles by finite difference time domain calculations.     

Zein adsorption to hydrophilic and hydrophobic surfaces investigated by surface plasmon resonance

Zein, the prolamine of corn, has been investigated for its potential as an industrial biopolymer. In previous research, zein was plasticized with oleic acid and formed into sheets/films. Physical properties of films were affected by film structure and controlled in turn by zein-oleic acid interactions. The nature of such interactions is not well understood. Thus, protein-fatty acid interactions were investigated in this work by the use of surface plasmon resonance (SPR). Zein adsorption from 75% aqueous 2-propanol solutions, 0.05% to 0.5% w/v, onto hydrophilic and hydrophobic self-assembled monolayers (SAMs) formed by 11-mercaptoundecanoic acid and 1-octanethiol, respectively, was monitored by high time resolution SPR. Initial adsorption rate and ultimate surface coverage increased with bulk protein concentration for both surfaces. The initial slope of plotted adsorption isotherms was higher on 11-mercaptoundecanoic acid than on 1-octanethiol, indicating higher zein affinity for hydrophilic SAMs. Also, maximum adsorption values were higher for zein on hydrophilic than on hydrophobic SAMs. Flushing off loosely bound zein in the SPR cell allowed estimation of apparent monolayer values. Differences in monolayer values for hydrophobic and hydrophilic surfaces were explained in terms of zein adsorption footprint.     

Measuring adsorption of a hydrophobic probe with a surface plasmon resonance sensor to monitor conformational changes in immobilized proteins

Conformational changes of proteins immobilized on solid matrices were observed by measuring the adsorption of Triton X-100 (TX), a nonionic detergent, as a hydrophobic probe with BIACORE, a biosensor that utilizes the phenomenon of surface plasmon resonance (SPR). Two kinds of proteins, alpha-glucosidase and lysozyme, were covalently attached to dextran matrices on the sensor surface in the flow cell and then exposed to various concentrations of TX solution. We measured SPR signal changes derived from adsorption of TX to the immobilized proteins and calculated the monolayer adsorption capacity using the Brunauer-Emmett-Teller (BET) equation. The results demonstrated that monolayer adsorption capacity is proportional to the amount of immobilized proteins. Further, the unfolding process of immobilized proteins on the sensor surface induced by guanidine hydrochloride was investigated by monitoring SPR signal increases due to the adsorption of TX to the exposed hydrophobic region of the protein. Results strongly suggested that the increase in the SPR signal reflected the formation of the agglutinative unfolded state. We expect our measuring method using the SPR sensor and TX adsorption will be a novel tool to provide conformational information regarding various proteins on solid matrices.     

High-throughput analysis of mumps virus and the virus-specific monoclonal antibody on the arrays of a cationic polyelectrolyte with a spectral SPR biosensor

We investigated the potential use of a spectral surface plasmon resonance (SPR) biosensor in a high-throughput analysis of mumps virus and a mumps virus-specific mAb on the arrays of a cationic polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA). The PDDA surface was constructed by electrostatic adsorption of the polyelectrolyte onto a monolayer of 11-mercaptoundecanoic acid (MUA). Poly-L-lysine was also adsorbed onto the MUA monolayer and compared with the PDDA surface in the capacity of mumps virus immobilization. The PDDA surface showed a higher adsorption of mumps virus than the poly-L-lysine surface. The SPR signal caused by the virus binding onto the PDDA surface was proportional to the concentration of mumps virus from 0.5 x 10(5) to 14 x 10(5) pfu/mL. The surface structure of the virus arrays was visualized by atomic force microscopy. Then, a dose-dependent increase in the SPR signal was observed when various concentrations of the antimumps virus antibody in buffer or human serum were applied to the virus arrays, and their interaction was specific. Thus, it is likely that the spectral SPR biosensor based on the cationic polyelectrolyte surface may provide an efficient system for a high-throughput analysis of intact virus and serodiagnosis of infectious diseases.     

Study of the attachment of Pseudomonas aeruginosa on gold and modified gold surfaces using surface plasmon resonance

This paper describes how the technique of surface plasmon resonance (SPR) can be utilized to follow (in real time) the attachment of Pseudomonas aeruginosa bacteria on bare gold and gold modified with a self-assembled monolayer (SAM) of mercaptounadecanoic acid. We show that SPR is able to discriminate between the adsorption of live versus dead (thermally shocked) bacteria. Moreover, the SPR distinguishes between the adsorption of wild-type versus mutant bacteria (single gene knockouts), the concentration of the bacterial suspension, and between bacteria adsorbing on SAM-modified and bare gold. SPR is able to measure bacterial adsorption within seconds of the bacterial suspension being introduced. Finally, a qualitative correlation between results from SPR with a crystal violet staining assay for different mutant bacteria was observed.     

Sensitivity Enhancement of Surface Plasmon Resonance Biosensor with 2-D Franckeite Nanosheets

Plasmonics - The sensitivity of a standard surface plasmon resonance (SPR) biosensor in angular interrogation is low. A unique 2-dimensional substantial heterostructure, franckeite/graphene layer,...     

An indirect competitive immunoassay for insulin autoantibodies based on surface plasmon resonance

We have developed a sensitive and specific method based on surface plasmon resonance (SPR) for detection of insulin autoantibodies (IAA) in serum samples from individuals at high risk of developing type 1 diabetes (T1D). When measuring trace molecules in undiluted sera with label-free techniques like SPR, non-specific adsorption of matrix proteins to the sensor surface is often a problem, since it causes a signal that masks the analyte response. The developed method is an indirect competitive immunoassay designed to overcome these problems. Today, IAA is mainly measured in radio immunoassays (RIAs), which are time consuming and require radioactively labeled antigen. With our SPR-based immunoassay the overall assay time is reduced by a factor of >100 (4 days to 50min), while sensitivity is maintained at a level comparable to that offered by RIA.     

Label-free reading of microarray-based proteins with high throughput surface plasmon resonance imaging

A simple method is presented discriminating proteins at a gold surface by using an emerging technology, surface plasmon resonance (SPR) imaging. As a high throughput method, the protein array of bovine serum albumin (BSA), poly-l-lysine (PL), casein and lactate dehydrogenase (LDG) was fabricated and SPR imaging enables detection from different kinds of proteins immobilized on the sensor surface. These proteins can be discriminated directly by various reflected intensity or changing the incident angular position of light. Denaturation of these immobilized proteins on SPR sensor by interacting with denaturant 6M GdnHCl solution was also performed and obvious changes in reflected intensity were occurred after denaturation. The observation of denaturation of these proteins further supported the fact that different proteins could be discriminated on protein array before denaturation. On the other hand, the procedure of denaturation provided useful information that any change of molecular structure with the progress of denaturation would result in change of SPR signal. Excellent reproducibility with a chip-to-chip for label-free discriminating various proteins was achieved.     

Real-time protein biosensor arrays based on surface plasmon resonance differential phase imaging

This paper reports the application of differential phase surface plasmon resonance (SPR) imaging in two-dimensional (2D) protein biosensor arrays. Our phase imaging approach offers a distinct advantage over the conventional angular SPR technique in terms of utilization efficiency of optical sensor elements in the imaging device. In the angular approach, each biosensor site in the biosensor array requires a linear array of optical detector elements to locate the SPR angular dip. The maximum biosensor density that a two-dimensional imaging device can offer is a one-dimensional SPR biosensor array. On the other hand, the phase-sensitive SPR approach captures data in the time domain instead of the spatial domain. It is possible that each pixel in the captured interferogram represents one sensor site, thus offering high-density two-dimensional biosensor arrays. In addition, our differential phase approach improves detection resolution through removing common-mode disturbances. Experimental results demonstrate a system resolution of 8.8 x 10(-7)RIU (refractive index unit). Real-time monitoring of bovine serum albumin (BSA)/anti-BSA binding interactions at various concentration levels was achieved using a biosensor array. The detection limit was 0.77 microg/ml. The reported two-dimensional SPR biosensor array offers a real-time and non-labeling detection tool for high-throughput protein array analysis. It may find promising applications in protein therapeutics, drug screening and clinical diagnostics.     

Vesicle fusion studied by surface plasmon resonance and surface plasmon fluorescence spectroscopy

Substrate-supported planar lipid bilayers are generated most commonly by the adsorption and transformation of phospholipid vesicles (vesicle fusion). We have recently demonstrated that simultaneous measurements of surface plasmon resonance (SPR) and surface plasmon fluorescence spectroscopy (SPFS) are highly informative for monitoring lipid membranes on solid substrates. SPR and SPFS provide information on the amount and topography of adsorbed lipid membranes, respectively. In this study, the vesicle fusion process was studied in detail by measuring SPR-SPFS at a higher rate and plotting the obtained fluorescence intensity versus film thickness. We could track the initial adsorption of vesicles, the onset of vesicle rupture occurring at certain vesicle coverage of the surface, and the autocatalytic transformation into planar bilayers. We also monitored vesicle fusion of the same vesicle suspensions by quartz crystal microbalance with dissipation monitoring (QCM-D). We compared the results obtained from SPR-SPFS and QCM-D to highlight the unique information provided by SPR-SPFS.     

Synthesis of hydrophobic nanoparticles for real‐time lysozyme detection using surface plasmon resonance sensor

Diagnostic biomarkers such as proteins and enzymes are generally hard to detect because of the low abundance in biological fluids. To solve this problem, the advantages of surface plasmon resonance (SPR) and nanomaterial technologies have been combined. The SPR sensors are easy to prepare, no requirement of labelling and can be detected in real time. In addition, they have high specificity and sensitivity with low cost. The nanomaterials have also crucial functions such as efficiency improvement, selectivity, and sensitivity of the detection systems. In this report, an SPR‐based sensor is developed to detect lysozyme with hydrophobic poly (N‐methacryloyl‐(L)‐phenylalanine) (PMAPA) nanoparticles. The SPR sensor was first characterized by attenuated total reflection‐Fourier transform infrared, atomic force microscope, and water contact angle measurements and performed with aqueous lysozyme solutions. Various concentrations of lysozyme solution were used to calculate kinetic and affinity coefficients. The equilibrium and adsorption isotherm models of interactions between lysozyme solutions and SPR sensor were determined and the maximum reflection, association, and dissociation constants were calculated by Langmuir model as 4.87, 0.019 nM⁻¹, and 54 nM, respectively. The selectivity studies of SPR sensor were investigated with competitive agents, hemoglobin, and myoglobin. Also, the SPR sensor was used four times in adsorption/desorption/recovery cycles and results showed that, the combination of optical SPR sensor with hydrophobic ionizable PMAPA nanoparticles in one mode enabled the detection of lysozyme molecule with high accuracy, good sensivity, real‐time, label‐free, and a low‐detection limit of 0.66 nM from lysozyme solutions. Lysozyme detection in a real sample was performed by using chicken egg white to evaluate interfering molecules present in the medium.     

Substrate Mode-Integrated SPR Sensor

We present the design, implementation and characterisation of an integrated surface plasmon resonance (SPR) biosensor chip involving diffractive optical coupling elements avoiding the need of prism coupling. The integrated sensor chip uses the angular interrogation principle and includes two diffraction gratings and the SPR sensing zone. The theoretical design is presented as well as the fabrication process. Experimental results (response of a reference water droplet and phosphate-buffered saline/water kinetic) are presented and compared with those obtained with the classical Kretschmann prism coupling setup. We believe that this prism-free architecture is perfectly suitable for low-cost and reproducible SPR biochemical sensor chips since the sensing zone can be functionalised as any other one.     

A novel ultrahigh-resolution surface plasmon resonance biosensor with an Au nanocluster-embedded dielectric film

The detection performance of conventional surface plasmon resonance (SPR) biosensors is limited to a 1 pg/mm(2) surface coverage of biomolecules, and consequently, such sensors struggle to detect the interaction of small molecules in low concentrations. The present study is attempted to propose the use of a novel SPR biosensor with Au nanoclusters embedded in a dielectric film to achieve a 10-fold improvement in the resolution performance. A co-sputtering method utilizing a multi-target sputtering system is used to fabricate the present dielectric films (SiO(2)) with embedded Au nanoclusters. It is shown that the sensitivity of the developed SPR biosensor can be improved by adjusting the size and volume fraction of the embedded Au nanoclusters in order to control the surface plasmon effect. The present gas detection and DNA hybridization experimental results confirm that the proposed Au nanocluster-enhanced SPR biosensor provides the potential to achieve an ultrahigh-resolution detection performance of approximately 0.1 pg/mm(2) surface coverage of biomolecules.     

Thermodynamic measurements and predictions of the adsorption of short-chain peptides on nanothin polymer films

This contribution describes experimental measurements of submolecular-level interaction energies involved in the process of peptide adsorption on polymer films. The objective of this study was to use surface plasmon resonance (SPR) spectroscopy to measure the Gibbs energy change on adsorption (DeltaG(ad)) for pairs of various homopeptides on highly uniform, nanothin polymer films and to use these data, along with the principle of additivity, to predict DeltaG(ad) for homologous homopeptides, as well as for a mixed-residue peptide. By using a graft polymerization methodology, a nanothin poly(2-vinylpyridine) film was prepared and adsorption energies were measured first for a homologous series of tyrosine (Y) homopeptides on this film to determine submolecular-level interaction energies. By using SPR, adsorption isotherms were measured for YY and YYY peptides; analysis of these isotherms provided DeltaG(ad) data for a midchain tyrosine unit and a set of chain-end tyrosine units; values were -0.75 +/- 0.07 kcal/mol and -2.12 +/- 0.04 kcal/mol, respectively. Combining the thermodynamic contributions for adsorption of individual tyrosine units allowed a predictive estimate of -5.12 +/- 0.32 kcal/mol for the adsorption energy for YYYYYY; this estimate deviated by only 2.3% from its measured value of -5.24 +/- 0.06 kcal/mol. Similarly, adsorption energies were found for phenylalanine, glycine, and tyrosine-leucine peptides. Combining the thermodynamic contributions for adsorption of individual residue units allowed a predictive estimate of -3.24 +/- 0.38 kcal/mol for a pentapeptide, leucine enkephalin; this estimate deviated by only 3.0% from its measured value of -3.34 +/-0.11 kcal/mol.     

Au-NPs enhanced SPR biosensor based on hairpin DNA without the effect of nonspecific adsorption

Gold nanoparticles (Au-NPs) are usually used to amplify surface plasmon resonance (SPR) signals, however, the serious nonspecific adsorption has largely limited their practical applications. Here, we developed a novel Au-NPs enhanced biosensor without the effect of nonspecific adsorption: cutting Au-NPs off from the biosensor surface by RsaI endonuclease. In order to further improve the sensitivity, the probe DNA was designed specially. After the cleavage reaction, the residual probe DNA formed hairpin structure, which also resulted in a great change in SPR dip shift. Then, with the coaction of Au-NPs and conformation change of probe DNA, the SPR signal was amplified greatly. Using this method, we monitored the process of DNA cleavage in real-time and achieved a detection level of 5×10(-8) M. Moreover, the result of X-ray photoelectron spectroscopy (XPS) experiment further confirmed that large nonspecific adsorption existed. However, because SPR recorded a process in which the Au-NPs were cut off, the serious nonspecific adsorption did not affect the experimental result.