Characterization of pGA1, a new plasmid from Corynebacterium glutamicum LP-6.

A new plasmid, pGA1, has been isolated from Corynebacterium glutamicum LP-6, and its detailed restriction map has been prepared. The 4.9-kb plasmid has a G + C content of 57%. It replicates in C. glutamicum ATCC13032 and is compatible with the three other plasmids, pCC1, pBL1 and pHM1519, commonly used for vector construction for amino acid-producing corynebacteria. Fusions of pGA1 with different Escherichia coli replicons (transferred from E. coli to Corynebacterium via transformation of spheroplasts or by filter mating experiments with intact cells) are shown to be suitable as shuttle plasmids; some of them are highly stable in C. glutamicum, even when propagated without any selection pressure.     

Identification of a novel gene involved in stable maintenance of plasmid pGA1 from Corynebacterium glutamicum.

The cryptic plasmid pGA1 (4.8 kb) from Corynebacterium glutamicum, replicating in the rolling-circle mode, has been reported to contain four open reading frames longer than 200 bp (ORFA/per, ORFA2, ORFB, ORFC/rep). Here we present another pGA1 gene, ORFE (174 bp), located in the region downstream of the per-ORFA2 gene cluster. The ORFE is transcribed into two RNA species in a direction opposite to that of the per-ORFA2 RNA. Introduction of ORFE in trans into the cells harboring the pGA1 derivatives carrying the main stability determinant, the per gene coding for a product that positively influences the pGA1 copy number and maintenance, increased their segregational stability. Mutation of the putative translational start of the ORFE abolished this observed positive effect in trans. ORFE thus codes for a protein acting as an accessory element involved in stable maintenance of plasmid pGA1 and was hence designated the aes gene (accessory effector of stable maintenance).     

Plasmid copy number mutation in repA gene encoding RepA replication initiator of cryptic plasmid pHM1519 in Corynebacterium glutamicum

ABSTRACT

Cryptic plasmid pHM1519 is a rolling-circular replication mode plasmid of the pCG1 plasmid family in coryneform bacteria. The derived shuttle vector pPK4 is maintained at about 40–50 copies per chromosome in Corynebacterium glutamicum 2256 (ATCC 13869). We found that a mutation (designated copA1) within the repA gene encoding essential initiator protein RepA of the pHM1519-replicon increased the copy number of the mutant plasmid to about 800 copies per chromosome. The mutation was a single G to A base transition, which changed Gly to Glu at position 429 of the amino acid sequence of RepA. In silico secondary structure prediction of RepA suggested that Gly429 is situated in a disordered region in a helix-turn-helix motif, which is a typical DNA-binding domain. This study shows the first example of a high copy number of a C. glutamicum cryptic plasmid caused by an altered replication initiator protein.     

Atypical location of double-strand origin of replication (nic site) on the plasmid pGA1 from Corynebacterium glutamicum

The double-strand origin of replication (dso) of the rolling-circle-replicating (RC) plasmid pGA1 from Corynebacterium glutamicum was analyzed using the runoff DNA synthesis assay. The site- and strand-specific breakage of double-stranded plasmid DNA, representing the nic site of dso, was localized precisely within the sequence 5'-CTGG decreases AT-3' in the distal part of the pGA1 rep gene. This location of dso differs from the dso positions found on other RC plasmids and is in agreement with the classification of the plasmid pGA1 into a new group of RC plasmids.     

Characterization of a novel plasmid pXZ608 from Corynebacterium glutamicum

BspA is a non-covalently anchored cystine-binding protein from Lactobacillus fermentum BR11. It has previously been used to present antigens derived from infectious organisms on the L. fermentum BR11 cell surface. In this study, the capacity of BspA to present a very large polypeptide was tested. A temperature sensitive plasmid was constructed that encodes a 175-kDa chimeric protein consisting of a fusion between BspA and an N-terminally truncated derivative of the Streptococcus salivarius ATCC 25975 glucosyltransferase GtfJ. This plasmid was introduced into the L. fermentum genome. Integrants were able to incorporate 20-40 nmol sucrose derived glucose into glucan per ml culture per optical density unit. The glucosyltransferase activity was external to the cytoplasmic membrane and bound to the cell. Unlike native BspA, the BspA-GtfJ fusion could not be removed from the cell by 5 M LiCl wash.     

Identification of a gene involved in plasmid structural instability in Corynebacterium glutamicum

Expression plasmids that facilitate production of bio-based products are susceptible to toxic effects that frequently affect plasmid structural stability in recombinant microbial cells. In order to enhance plasmid stability in recombinant Corynebacterium glutamicum, an expression plasmid containing genes of the Clostridium acetobutylicum butyryl-CoA synthesis operon with high structural instability within wild-type C. glutamicum was employed. From a total of 133 mutants exhibiting disruptions in 265 suspect genes, only cgR_0322-deficient mutant was able to maintain the expression plasmid intact. The mutant exhibited normal growth under standard laboratory conditions but its transformation efficiency was about one order of magnitude lower than that of wild-type strain. The cgR_0322 gene encodes an endonuclease that is active against single- as well as double-stranded DNA substrates in the presence of Mg²⁺. The cgR_0322-deficient strain should therefore facilitate the development of more robust C. glutamicum strains to be used as microbial production hosts.     

Efficient markerless gene replacement in Corynebacterium glutamicum using a new temperature-sensitive plasmid

Random chemical mutation of a Corynebacterium glutamicum-Escherichia coli shuttle vector derived from plasmid pCGR2 was done using hydroxylamine. It brought about amino acid substitutions G109D and E180K within the replicase superfamily domain of the plasmid's RepA protein and rendered the plasmid highly unstable, especially at higher incubation temperatures. Colony formation of C. glutamicum was consequently completely inhibited at 37 °C but not at 25 °C. G109 is a semi-conserved residue mutation which resulted in major temperature sensitivity. E180 on the other hand is not conserved even among RepA proteins of closely related C. glutamicum pCG1 family plasmids and its independent mutation caused relatively moderate plasmid instability. Nonetheless, simultaneous mutation of both residues was required to achieve temperature-sensitive colony formation. This new pCGR2-derived temperature-sensitive plasmid enabled highly efficient chromosomal integration in a variety of C. glutamicum wild-type strains, proving its usefulness in gene disruption studies. Based on this, an efficient markerless gene replacement system was demonstrated using a selection system incorporating the temperature-sensitive replicon and Bacillus subtilis sacB selection marker, a system hitherto not used in this bacterium. Single-crossover integrants were accurately selected by temperature-dependent manner and 93% of the colonies obtained by the subsequent sucrose selection were successful double-crossover recombinants.     

Low copy number plasmid vectors for gene cloning and for monitoring gene expression

Abstract Derivatives of an IncW incompatibility plasmid with a low copy number are described which can be used for gene cloning or for analysing gene expression in conditions similar to those found in the host chromosome. Gene expression can be monitored after construction of operon or protein fusions with the lacZYA operon and measurement in Escherichia coli of the β-galactosidase activity.     

Characterization of a unique mutant lysE gene, originating from Corynebacterium glutamicum, encoding a product that induces L-lysine production in Methylophilus methylotrophus

lysE24 is an allele of lysE encoding an L-lysine exporter of Corynebacterium glutamicum. The mutant gene is able to induce L-lysine production in Methylophilus methylotrophus. Although lysE24 has a mutation in the middle of lysE that results in chain termination, the entire lysE locus, including the region downstream of the short open reading frame, is necessary for L-lysine production. We propose that separate polypeptides are synthesized from the lysE24 locus due to reinitiation of translation utilizing an existing start codon beyond the site of the frameshift, and present evidence that translational coupling is required to form the functional lysE24 product. In addition, expression of lysE24 induces L-lysine production in another methylotroph, Methylobacillus glycogenes. These data suggest that the lysE24 product is a split protein and that this curious feature might be a structure necessary for its functioning in certain obligate gram-negative methylotrophs.     

Characterization of a 24-kb plasmid pCGR2 newly isolated from Corynebacterium glutamicum

A 24-kb plasmid with 21 open reading frames (ORFs) was newly isolated from Corynebacterium glutamicum ATCC 14997 and named pCGR2. Three of its ORFs were indispensable for stable autonomous replication of pCGR2 in C. glutamicum: in the absence of selective pressure, deletion derivatives of pCGR2 containing the three ORFs showed stability in C. glutamicum for over 50 generations. The first of these ORFs encoded replicase repA whose gene product revealed high amino acid sequence similarity to corresponding gene products of C. glutamicum pCG1-family plasmids in general, and to that of pTET3 plasmid repA in particular. The other two ORFs were located upstream of repA and exhibited high sequence similarity to pTET3 parA and parB, respectively. Interestingly, plasmids based on the pCGR2 were compatible not only with those based on different family plasmids (pBL1, pCASE1) but also with those based on pCG1-family plasmid. Plasmids comprising pCGR2 repA showed a copy number of four in C. glutamicum. The number increased to 240 upon introduction of a mutation within the repA origin of the putative promoter for counter-transcribed RNA. This 60-fold increase in copy number should immensely contribute towards enhanced expression of desired genes in C. glutamicum.     

Plasmid copy number control: isolation and characterization of high-copy-number mutants of plasmid pE194.

A plasmid, pE194, obtained from Staphylococcus aureus confers resistance to macrolide, lincosamide, and streptogramin type B ("MLS") antibiotics. For full expression, the resistance phenotype requires a period of induction by subinhibitory concentrations of erythromycin. A copy number in the range of 10 to 25 copies per cell is maintained during cultivation at 32 degrees C. It is possible to transfer pE194 to Bacillus subtilis by transformation. In B. subtilis, the plasmid is maintained at a copy number of approximately 10 per cell at 37 degrees C, and resistance is inducible. Tylosin, a macrolide antibiotic which resembles erythromycin structurally and to which erythromycin induces resistance, lacks inducing activity. Two types of plasmid mutants were obtained and characterized after selection on medium containing 10 microgram of tylosin per ml. One mutant class appeared to express resistance constitutively and maintained a copy number indistinguishable from that of the parent plasmid. The other mutant type had a 5- to 10-fold-elevated plasmid copy number (i.e., 50 to 100 copies per cell) and expressed resistance inducibly. Both classes of tylosin-resistant mutants were shown to be due to alterations in the plasmid and not to modifications of the host genome.     

Generation of miniplasmids from copy number mutants of the R plasmid NR1.

Small, closed circular deoxyribonucleic acid molecules, called miniplasmids, were observed in Escherichia coli harboring copy number mutants of the R plasmid NR1 after growth in medium containing tetracycline. The level of tetracycline resistance conferred by the copy mutant plasmids was lower (3 to 6 microgram/ml) than that conferred by NR1 (100 MICROGRAM/ML). The presence of the miniplasmid enhanced the level of tetracycline resistance conferred by the copy mutant. Miniplasmids of molecular weights 4 X 10(6) to 13 X 10(6) were found. They carried no antibiotic resistance markers and could be eliminated by growth in the presence of chloramphenicol and/or streptomycin-spectinomycin. Studies with the restriction endonucleases EcoRI and Sal I indicated that the miniplasmids are derived from the region of the copy mutant plasmids that contains the origin for replication of the resistance transfer factor. There were approximately 12 copies of the miniplasmid per chromosome, compared with 3 and 6 copies of the copy mutants of NR1. The miniplasmids appeared to be incompatible with the copy mutant plasmids.     

Molecular cloning and functional characterization of a copy number control gene (copB) of plasmid R1.

Deletions or insertions in the copB gene of plasmid R1 result in a copy mutant phenotype. The wild-type copB gene has been cloned on various plasmid vectors. The presence of such chimeric plasmids reduced the copy number of R1 copB mutant plasmids to normal or subnormal levels, indicating the expression of a trans-acting inhibitor activity from the copB chimeras. However, the cloned copB gene did not affect the copy number of wild-type R1, and no incompatibility was exerted by the cloned copB gene against wild-type R1 (or R100). Although the copB gene is not normally required for the incompatibility exerted by copA, it is shown that the CopB function is required for expression of incompatibility by the copA gene from some types of chimeric plasmids. Mutant plasmids that have lost both Cop functions replicate in an uncontrolled fashion.     

Analysis of dominant copy number mutants of the plasmid pMB1.

We characterize two dominant copy number mutants of a derivative of plasmid pMB1. One of the two mutations maps in the -35 region of the primer promoter and results in increased promoter activity. The analysis of the secondary structure in the proximity of the mutant sequence suggests a possible mechanism which could be the basis of the promoter-up phenotype. By comparing the properties of the mutant and the wild type plasmid in an in vitro system, we confirm that the primer and not its coding sequence is the target of RNA I inhibition. The second mutation affects the sequence of the primer so that it is less sensitive to inhibition by RNA I. We propose that this mutation stabilizes a secondary structure necessary for primer formation.