A steady-state study on the formation of Compounds II and III of myeloperoxidase

The reaction between native myeloperoxidase and hydrogen peroxide, yielding Compound II, was investigated using the stopped-flow technique. The pH dependence of the apparent second-order rate constant showed the existence of a protonatable group on the enzyme with a pKa of 4.9. This group is ascribed to the distal histidine imidazole, which must be deprotonated to enable the reaction of Compound I with hydrogen peroxidase to take place. The rate constant for the formation of Compound II by hydrogen peroxide was 3.5.10(4) M-1.s-1. During the reaction of myeloperoxidase with H2O2, rapid reduction of added cytochrome c was observed. This reduction was inhibitable by superoxide dismutase, and this demonstrates that superoxide anion radicals are generated. When potassium ferrocyanide was used as an electron donor to generate Compound II from Compound I, the pH dependence of the apparent second-order rate constant indicated involvement of a group with a pKa of 4.5. However, with ferrocyanide as an electron donor, protonation of the group was necessary to enable the reaction to take place. The rate constant for the generation of Compound II by ferrocyanide was 1.6.10(7) M-1.s-1. We also investigated the reaction of Compound II with hydrogen peroxide, yielding Compound III. Formation of Compound III (k = 50 M-1.s-1) proceeded via two different pathways, one of which was inhibitable by tetranitromethane. We further investigated the stability of Compound II and Compound III as a function of pH, ionic strength and enzyme concentration. The half-life values of both Compound II and Compound III were independent of the enzyme concentration and ionic strength. The half-life value of Compound III was pH-dependent, showing a decreasing stability with increasing pH, whereas the stability of Compound II was independent of pH over the range 3-11.     

Oxidation of dicyano-bis(1,10 phenanthroline) iron(II) by compounds I and II of cytochrome c peroxidase.

The apparent bimolecular rate constant for the oxidation of dicyano-bis(1,10 phenanthroline) iron(II) by compound II of cytochrome c peroxidase (ferrocytochrome c; hydrogen-peroxide oxidoreductase EC 1.11.1.5) has been measured over the pH range 2.5-11.0 at 0.1 M ionic strength, 25 degrees C, by the stopped-flow technique. An ionizable group in the enzyme, with a pKa of 4.5, strongly influences the electron transfer rate between the ferrous complex and the oxidized site in the enzyme. The electron transfer is fastest when the group is protonated, with a rate constant of 2.9 - 10-5 M--1 - s-1. The rate constantdecreases over three orders of magnitude when the proton dissociates. The apparent bimolecular rate constant for the oxidation of the ferrous complex by compound I of cytochrome c peroxidase was determined between pH 3.5 and 6. Under all conditions where this rate constant could be measured it was about three times larger than that for the oxidation by compound II.     

Effect of Asp-235-->Asn substitution on the absorption spectrum and hydrogen peroxide reactivity of cytochrome c peroxidase.

The spectroscopic properties of a mutant cytochrome c peroxidase, in which Asp-235 has been replaced by an asparagine residue, were examined in both nitrate and phosphate buffers between pH 4 and 10.5. The spin state of the enzyme is pH dependent, and four distinct spectroscopic species are observed in each buffer system: a predominantly high-spin Fe(III) species at pH 4, two distinct low-spin forms between pH 5 and 9, and the denatured enzyme above pH 9.3. The spectrum of the mutant enzyme at pH 4 is dependent upon specific ion effects. Increasing the pH above 5 converts the mutant enzyme to a predominantly low-spin hydroxy complex. Subsequent conversion to a second low-spin form is essentially complete at pH 7.5. The second low-spin form has the distal histidine, His-52, coordinated to the heme iron. To evaluate the effect of the changes in coordination state upon the reactivity of the enzyme, the reaction between hydrogen peroxide and the mutant enzyme was also examined as a function of pH. The reaction of CcP(MI,D235N) with peroxide is biphasic. At pH 6, the rapid phase of the reaction can be attributed to the bimolecular reaction between hydrogen peroxide and the hydroxy-ligated form of the mutant enzyme. Despite the hexacoordination of the heme iron in this form, the bimolecular rate constant is approximately 22% that of pentacoordinate wild-type yeast cytochrome c peroxidase. The bimolecular reaction of the mutant enzyme with peroxide exhibits the same pH dependence in nitrate-containing buffers that has been described for the wild-type enzyme, indicating a loss of reactivity with the protonation of a group with an apparent pKa of 5.4. This observation eliminates Asp-235 as the source for this heme-linked ionization and strengthens the hypothesis that the pKa of 5.4 is associated with His-52. The slower phase of the reaction between peroxide and the mutant enzyme saturates at high peroxide concentration and is attributed to conversion of unreactive to reactive forms of the enzyme. The fraction of enzyme which reacts via the slow phase is dependent upon both pH and specific ion effects.     

Characterization of the hydrogen peroxide-enzyme reaction for two cytochrome c peroxidase mutants

The bimolecular reaction between Escherichia coli-produced cytochrome-c peroxidase (CcP(MI)) and hydrogen peroxide is identical to that of native yeast cytochrome-c peroxidase (CcP) and hydrogen peroxide in the neutral pH region. Both enzymes have pH-independent bimolecular rate constants of 46 microM-1.s-1 for the reaction with hydrogen peroxide. A second mutant enzyme, E. coli-produced cytochrome-c peroxidase mutant with phenylalanine at position 191 (CcP(MI, F191)), has a pH-independent bimolecular rate constant for the hydrogen peroxide reaction of 65 microM-1.s-1, 40% larger than for CcP or CcP(MI). The initial peroxide-oxidation product of CcP(MI, F191) is an oxyferryl porphyrin pi-cation radical intermediate in contrast to the oxyferryl amino-acid radical intermediate formed upon oxidation of CcP or CcP(MI) with hydrogen peroxide. The reactions of all three enzymes with hydrogen peroxide are pH-dependent in KNO3-containing buffers. The reactions are influenced by an ionizable group, which has an apparent pKa of 5.4 in all three enzymes. The enzymes react with hydrogen peroxide when the ionizable group is unprotonated. Both CcP(MI) and CcP(MI, F191) have slightly smaller pH stability regions compared to CcP as assessed by the hydrogen peroxide titer and spectral analysis. The alteration in structural stability must be attributed to differences in the primary sequence between CcP and CcP(MI) which occur at positions -2, -1, 53 and 152.     

Cytochrome c peroxidase catalyzed oxidation of ferrocytochrome c by hydrogen peroxide: ionic strength dependence of the steady-state rate parameters

The steady-state kinetics of the cytochrome c peroxidase catalyzed oxidation of horse heart ferrocytochrome c by hydrogen peroxide have been studied at both pH 7.0 and pH 7.5 as a function of ionic strength. Plots of the initial velocity versus hydrogen peroxide concentration at fixed cytochrome c are hyperbolic. The limiting slope at low hydrogen peroxide give apparent bimolecular rate constants for the cytochrome c peroxidase-hydrogen peroxide reaction identical with those determined directly by stopped-flow techniques. Plots of the initial velocity versus cytochrome c concentration at saturating hydrogen peroxide (200 microM) are nonhyperbolic. The rate expression requires squared terms in cytochrome c concentration. The maximum turnover rate of the enzyme is independent of ionic strength, with values of 470 +/- 50 s-1 and 290 +/- 30 s-1 at pH 7.0 and 7.5, respectively. The limiting slope of velocity versus cytochrome c concentration plots provides a lower limit for the association rate constant between cytochrome c and the oxidized intermediates of cytochrome c peroxidase. The limiting slope varies from 10(6) M-1 s-1 at 300 mM ionic strength to 10(8) M-1 s-1 at 20 mM ionic strength and extrapolates to 5 x 10(8) M-1 s-1 at zero ionic strength. The data are discussed in terms of both a two-binding-site mechanism and a single-binding-site, multiple-pathway mechanism.     

The reaction mechanism of the novel vanadium-bromoperoxidase. A steady-state kinetic analysis

The reaction of vanadium-bromoperoxidase from the brown alga Ascophyllum nodosum with hydrogen peroxide, bromide, and 2-chlorodimedone has been subjected to an extensive steady-state kinetic analysis. Systematic variation of pH and the concentrations of these three components demonstrate that the reaction model includes four enzyme species: native bromoperoxidase, a bromoperoxidase-bromide inhibitory complex, a bromoperoxidase-hydrogen peroxide intermediate, and a bromoperoxidase-HOBr species. This latter intermediate did not display any direct interaction with the nucleophilic reagent as oxidized bromine species (Br-3, Br2, and/or HOBr) were the primary reaction products. The generation of oxidized bromine species was as fast as the bromination of 2-chlorodimedone. The enzyme did not show any specificity with regard to bromination of various organic compounds. Formation of the bromoperoxidase-bromide inhibitory complex was competitive with the reaction between hydrogen peroxide and enzyme. From the steady-state kinetic data lower limits for the second-order rate constants at various pH values were calculated for individual steps in the catalytic cycle. This pH study showed that native enzyme must be unprotonated prior to binding of hydrogen peroxide (second-order association rate constant of 2.5.10(6) M-1.s-1 at pH greater than 6). The pKa for the functional group controlling the binding of hydrogen peroxide was 5.7 and is ascribed to a histidine residue. The reaction rate between bromide and enzyme-hydrogen peroxide intermediate also depended on pH (second-order association rate constant of 1.7.10(5) M-1.s-1 at pH 4.0).     

Oxidation of cytochrome c peroxidase to compound I by peroxyacids: evidence for rate-limiting diffusion through the protein matrix

The rate of the reaction between p-nitroperoxybenzoic acid and cytochrome c peroxidase (CcP) has been investigated as a function of pH and ionic strength. The pH dependence of the reaction between CcP and peracetic acid has also been determined. The rate of the reactions are influenced by two heme-linked ionizations in the protein. The enzyme is active when His-52 (pK(a) 3.8 +/- 0.1) is unprotonated and an unknown group with a pK(a) of 9.8 +/- 0.1 is protonated. The bimolecular rate constant for the reaction between peracetic acid and CcP and between p-nitroperoxybenzoic acid and CcP are (1.8 +/- 0.1) x 10(7) and (1.6 +/- 0.2) x 10(7) M(-)(1) s(-)(1), respectively. These rates are about 60% slower than the reaction between hydrogen peroxide and CcP. A critical comparison of the pH dependence of the reactions of hydrogen peroxide, peracetic acid, and p-nitroperoxybenzoic acid with CcP provides evidence that both the neutral and anionic forms of the two peroxyacids react directly with the enzyme. The peracetate and p-nitroperoxybenzoate anions react with CcP with rates of (1.5 +/- 0.1) x 10(6) and (1.6 +/- 0.2) x 10(6) M(-)(1) s(-)(1), respectively, about 10 times slower than the neutral peroxyacids. These data indicate that CcP discriminates between the neutral peroxyacids and their negatively charged ions. However, the apparent bimolecular rate constant for reaction between p-nitroperoxybenzoate and CcP is independent of ionic strength in the range of 0.01-1.0 M, suggesting that electrostatic repulsion between the anion and CcP is not the cause of the lower reactivity for the peroxybenzoate anion. The data are consistent with the hypothesis that the rate-limiting step for the oxidation of CcP to compound I by both neutral peroxyacid and the negatively charged peroxide ion is diffusion of the reactants through the protein matrix, from the surface of the protein to the distal heme pocket.     

Reaction of bovine-liver copper-zinc superoxide dismutase with hydrogen peroxide. Evidence for reaction with H2O2 and HO2- leading to loss of copper

The reaction of hydrogen peroxide with the copper-zinc bovine-liver superoxide dismutase at low molar ratios (0.2-20.0) of H2O2/active site between pH 7.3-10.0 leads to the loss of native enzyme as a distinct form monitored by electrophoresis. The pH dependence of the loss of native enzyme between 7.3 and 9.0 indicates the involvement of a conjugate base on the enzyme of pKa of 8.7 +/- 0.1. The rate of loss of the native enzyme is first order with respect to the concentration of both enzyme and hydrogen peroxide between pH 7.3 and 9.0 with no evidence for binding of peroxide. A second-order rate constant of 3.0 +/- 1.0 M-1 s-1 is obtained from these data. At pH 10.0 the reaction is first order with respect to enzyme concentration but saturable in H2O2. All data are consistent with the interpretation that H2O2 reacts with the enzyme at the lower pH where the reaction is dependent upon the conjugate base of a functional group on the enzyme. At the higher pH, the data are consistent with the reaction of HO2- and H2O2 with the dismutase. The dissociation constant for HO2- calculated from the kinetic data at pH 10.0 is between 25-50 microM and the rate constant for the breakdown of the HO2- dismutase complex is 1.10 + 0.05 x 10(-2) s-1. The change in the electrophoretic pattern at all pH values is accompanied by the loss of the ability of the enzyme to bind copper. Weakly bound or free copper can be detected using bathocuproine disulfonate. Furthermore copper-defficient forms of the enzyme can be detected by staining gels of the peroxide-treated dismutase with diethyldithiocarbamate.     

4-nitroimidazole binding to horse metmyoglobin: evidence for preferential anion binding

The ionization of 4-nitroimidazole to 4-nitroimidazolate was investigated as a function of ionic strength. The apparent pKa varies from 8.99 to 9.50 between 0.001 and 1.0 M ionic strength, respectively, at 25 degrees C. The ionic strength dependence of this ionization is anomalous. The binding of 4-nitroimidazole by horse metmyoglobin was studied between pH 5.0 and 11.5 and as a function of ionic strength between 0.01 and 1.0 M. The association rate constant is pH-dependent, varying from 24 M(-1)s(-1) at pH 5 to a maximum value of 280 M(-1)s(-1) at pH 9.5 and then decreasing to 10 M(-1)s(-1) at pH 11.5 in 0.1 M ionic strength buffers. The dissociation rate constant has a much smaller pH dependence, varying from 0.082 s(-1) at low pH to 0.035 s(-1) at high pH, with an apparent pKa of 6.5. The binding affinity of 4-nitroimidazole to horse metmyoglobin is about 2.5 orders of magnitude stronger than that for imidazole and this increased affinity is attributed to the much slower dissociation rate for 4-nitroimidazole compared to that of imidazole. Although the ionic strength dependence of the binding rate is small and secondary kinetic salt effects can account for the ionic strength dependence of the association rate constant, the pH dependence of the rate constants and microscopic reversibility arguments indicate that the anionic form of the ligand binds more rapidly to all forms of metmyoglobin than does the neutral form of the ligand. However, the spectrum of the complex is similar to model complexes involving neutral imidazole and not imidazolate. The latter observation suggests that the initial metmyoglobin/4-nitroimidazolate complex rapidly binds a proton and the neutral form of the bound ligand is stabilized, probably through hydrogen binding with the distal histidine.     

Kinetics and equilibria of cyanide binding to prostaglandin H synthase

Cyanide binding to prostaglandin H (PGH) synthase results in a spectral shift in the Soret region. This shift was exploited to determine equilibrium and kinetic parameters of the cyanide binding process. At pH 8.0, ionic strength 0.22 M, 4 degrees C, the cyanide dissociation constant, determined from equilibrium experiments, is (65 +/- 10) microM. The binding rate constant is (2.8 +/- 0.2) x 10(3) M-1 s-1, and the dissociation rate constant is zero within experimental error. Through a kinetic study of the binding process as a function of pH, from pH 3.96 to 8.00, it was possible to determine the pKa of a heme-linked acid group on the enzyme of 4.15 +/- 0.10 with citrate buffer. An apparent pKa of 4.75 +/- 0.03 was determined with acetate buffer; this different value is attributed to complexation of the enzyme with one of the components of the acetate buffer.     

The reaction of hydrogen peroxide with the dimethyl ester heme derivative of cytochrome c peroxidase

A modified cytochrome c peroxidase was prepared by reconstituting apocytochrome c peroxidase with protoheme in which both heme propionic acid groups were converted to the methyl ester derivatives. The modified enzyme reacted with hydrogen peroxide with a rate constant of (1.3 +/- 0.2) x 10(7) M-1 s-1, which is 28% that of the native enzyme. The reaction between the modified enzyme and hydrogen peroxide was pH-dependent with an apparent pK of 5.1 +/- 0.1 compared to a value of 5.4 +/- 0.1 for the native enzyme. These observations support the conclusion that the apparent ionization near pH 5.4, which influences the hydrogen peroxide-cytochrome c peroxidase reaction is not due to the ionization of the propionate side chains of the heme group in the native enzyme. A second apparent ionization, with pK of 6.1 +/- 0.1, influences the spectrum of the modified enzyme which changes from a high spin type at low pH to a low spin type at high pH.     

Horseradish peroxidase. XXXII. pH dependence of the oxidation of L-(-)-tyrosine by compound I.

The rate of oxidation of L-(-)-tyrosine by horseradish peroxidase compound 1 has been studied as a function of pH at 25 degrees C and ionic strength 0.11. Over the pH range of 3.20--11.23 major effects of three ionizations were observed. The pKa values of the phenolic (pKa = 10.10) and amino (pKa = 9.21) dissociations of tyrosine and a single enzyme ionization (pKa = 5.42) were determined from nonlinear least squares analysis of the log rate versus pH profile. It was noted that the less acidic form of the enzyme was most reactive; hence, the reaction is described as base catalyzed. The rate of tyrosine oxidation falls rapidly with the deprotonation of the phenolic group.     

Characterization of the oxidized states of bromoperoxidase

Bromoperoxidase Compound I has been formed in reactions between bromoperoxidase and organic peroxide substrates. The absorbance spectrum of bromoperoxidase Compound I closely resembles the Compound I spectra of other peroxidases. The pH dependence of the second order rate constant for the formation of Compound I with hydrogen peroxide demonstrates the presence of an ionizable group at the enzyme active site having a pKa of 5.3. Protonation of this acidic group inhibits the rate of Compound I formation. This pKa value is higher than that determined for other peroxidases but the overall pH rate profiles for Compound I formation are similar. The one-electron reduction of bromoperoxidase Compound I yields Compound II and a second reduction yields native enzyme. Bromoperoxidase Compound II readily forms Compound III in the presence of an excess of hydrogen peroxide. Compound III passes through an as yet uncharacterized intermediate (III) in its decay to native enzyme. Compound III is produced and accumulates in enzymatic bromination reactions to become the predominate steady state form of the enzyme. Since Compound III is inactive as catalyst for enzymatic bromination, its accumulation leads to an idling reaction pathway which displays an unusual kinetic pattern for the bromination of monochlorodimedone.     

Reaction of hydrogen peroxide with the rapid form of resting cytochrome oxidase.

The hydrogen peroxide binding reaction has been examined with alkaline-purified resting enzyme in order to avoid mixtures of low pH induced fast and slow conformers. At pH 8.8-9.0 (20 degrees C), the reactivity of resting enzyme was similar to the peroxide-free, pulsed conformer that has been characterized by other investigators. The reaction showed single-phase reactivity at 435 and 655 nm and required a minimum 8:1 molar excess of peroxide (over cytochrome a3) for quantitative reaction. At 16:1, the Soret band was stable for 1.0-1.5 h, but above 80:1, the band began showing generalized attenuation within 1-2 min. The peroxide binding reaction was also associated with an increase in absorbance at 606 nm which correlated with the rate of change at 435 and 655 nm. The observed rate constants at each of these wavelengths showed similar linear dependence on peroxide concentration, giving an average bimolecular rate constant of 391 M-1.s-1 and a Kd of 5.1 microM. The rise phase at 606 nm was observed to saturate at an 8:1 molar excess of peroxide but showed a slow, concentration-dependent first-order decay that gave a bimolecular rate constant and Kd of 38 M-1.s-1 and 20 microM, respectively. The decay was not associated with a change in the Soret absorption or charge-transfer regions, suggesting a type of spectral decoupling. An isosbestic point at 588 nm was consistent with the 606- to 580-nm conversion proposed by other investigators, although direct observation of a new band at 580 nm was difficult.(ABSTRACT TRUNCATED AT 250 WORDS)     

Kinetics of the oxidation of reduced nicotinamide adenine dinucleotide by horseradish peroxidase compounds I and II

The transient state kinetics of the oxidation of reduced nicotinamide adenine dinucleotide (NADH) by horseradish peroxidase compound I and II (HRP-I and HRP-II) was investigated as a function of pH at 25.0 degrees C in aqueous solutions of ionic strength 0.11 using both a stopped-flow apparatus and a conventional spectrophotometer. In agreement with studies using many other substrates, the pH dependence of the HRP-I-NADH reaction can be explained in terms of a single ionization of pKa = 4.7 +/- 0.5 at the active site of HRP-I. Contrary to studies with other substrates, the pH dependence of the HRP-II-NADH reaction can be interpreted in terms of a single ionization with pKa of 4.2 +/- 1.4 at the active site of HRP-II. An apparent reversibility of the HRP-II-NADH reaction was observed. Over the pH range of 4-10 the rate constant for the reaction of HRP-I with NADH varied from 2.6 X 10(5) to 5.6 X 10(2) M-1 s-1 and of HRP-II with NADH varied from 4.4 X 10(4) to 4.1 M-1 s-1. These rate constants must be taken into consideration to explain quantitatively the oxidase reaction of horseradish peroxidase with NADH.     

The oxidation of ferrocytochrome c in nonbinding buffer.

The apparent equilibrium constant and rate of oxidation was investigated for the reaction of cytochrome c with iron hexacyanide. It was found that if horse heart ferricytochrome c was exposed to ferricyanide (to oxidize traces of reduced protein) the cytochrome subsequently, even after extensive dialysis, had an apparent equilibrium constant different from that of electrodialyzed protein. The effect of ferricyanide ion apparently cannot be removed by ordinary dialysis. The ionic strength dependence of the apparent equilibrium constant and bimolecular oxidation rate constant was measured in the range 1--200 mM using Tris--cacodylate or potassium phosphate buffers at pH 7.0, and electrodialyzed horse heart cytochrome c. The oxidation reaction proceeded very rapidly. Extrapolated to zero ionic strength, kox (approximately 9 X 10(9) M-1 S-1) was about 7% of that calculated for a diffusion-limited reaction. Since the exposed heme edge occupies only the order of 3% of the surface area, electron transfer apparently results at nearly every collision with the active-site region. An effective charge of + 7.8 units was estimated for the oxidation reaction. The rate of oxidation of Pseudomonas aeruginosa c551 was much slower (kox at mu = 0 was the order of 6 X 10(3)), and was not consistent with diffusion-limited kinetics.     

Effect of Physical Factors on Reactions of Horse-Radish Peroxidase Complexes with Reduced Cytochrome c

This investigation concerns the effect of certain physical factors—viscosity, dielectric constant, ionic strength, and temperature of the medium—on the reaction of hydrogen peroxide and ferrocytochrome c in the presence of the enzyme horse-radish peroxidase. From study of the effects of viscosity and dielectric constant, it was concluded that the reaction between the secondary complex of hydrogen peroxide and enzyme on the one hand and ferrocytochrome c on the other is controlled by diffusion in media of high viscosity and by electrostatic effects at low viscosities. With respect to ionic strength, the data at pH 4.7 indicated a dipole-dipole interreaction. The temperature dependence of the over-all reaction had a Q₁₀ of 1.25.     

Kinetics of formation of the primary compound (compound I) from hydrogen peroxide and turnip peroxidases.

A kinetic study of the reaction of two turnip peroxidases (P1 and P7) with hydrogen peroxide to form the primary oxidized compound (compound I) has been carried out over the pH range from 2.4 to 10.8. In the neutral and acidic pH regions, the rates depend linearly on hydrogen peroxide concentration whereas at alkaline pH values the rates display saturation kinetics. A compound is made with the cyanide binding reaction to peroxidases since the two reactions are influenced in the same manner by ionization of groups on the native enzymes. Two different ionization processes of peroxidase P1 with pKa values of 3.9 and 10 are required to explain the rate pH profile for the reaction with H2O2. Protonation of the former group and ionization of the latter causes a decrease in the rate of reaction of the enzyme with H2O2. In the case of peroxidase P7 a minimum model involves three ionizable groups with pKa values of 2.5, 4 and 9. Protonation of the former two groups and ionization of the latter lowers the reaction rate. In the pH-independent region, the rate of formation of compound I was measured as a function of temperature. From the Arhenius plots the activation energy for the reaction was calculated to be 2.9 +/- 0.1 kcal/mol for P1 and 5.4 +/- 0.3 kcal/mol for P7. However, the rates are independent of viscosity in glycerol-water mixtures up to 30% glycerol.     

pH dependence of the reaction rate of His 48 with p-bromophenacyl bromide and of the binding constant to Ca2+ of the monomeric forms of intact and alpha-NH2 modified phospholipases A2 from Trimeresurus flavoviridis

The phospholipase A2 of Trimeresurus flavoviridis was found to show monomer-dimer equilibria. Under conditions where the enzyme exists predominantly in the monomeric form, the chemical reaction rate of p-bromophenacyl bromide (BPB) with the catalytic group, His 48, was studied at 25 degrees C and ionic strength 0.2 by measuring the residual enzymic activity using a fluorescent substrate, 1,2-bis[4-(1-pyreno)butanoyl]-sn-glycero-3-phosphorylcholine (diPBPC). The pH-dependence curve of the reaction rate for the intact enzyme was practically the same as that for the modified enzyme, in which the N-terminal alpha-NH2 group had been selectively converted into an alpha-keto group. The pH-dependence curves were monophasic (sigmoidal) with a midpoint at pH 7.53, which corresponds to the pKa value of His 48. The pH dependences of the binding constants of Ca2+ to the intact and the alpha-NH2 modified enzymes were also studied at 25 degrees C and ionic strength 0.2 by measuring the changes in the tryptophyl fluorescence and/or aromatic CD spectra. The pH-dependence data for the modified enzyme were interpreted in terms of participation of Asp 49 (pKa 5.40) and His 48 (pKa 7.53), assuming that the protonation of Asp 49 competes with the Ca2+ binding. The pH-dependence data for the intact enzyme were similarly interpreted in terms of participation of the alpha-NH2 group (pKa 9.40) in addition to that of Asp 49 (pKa 5.40) and His 48 (pKa 7.53).(ABSTRACT TRUNCATED AT 250 WORDS)     

Reaction of ferrous lactoperoxidase with hydrogen peroxide and dioxygen: an anaerobic stopped-flow study

Lactoperoxidase (LPO) is found in mucosal surfaces and exocrine secretions including milk, tears, and saliva and has physiological significance in antimicrobial defense which involves (pseudo-)halide oxidation. LPO compound III (a ferrous-dioxygen complex) is known to be formed rapidly by an excess of hydrogen peroxide and could participate in the observed catalase-like activity of LPO. The present anaerobic stopped-flow kinetic analysis was performed in order to elucidate the catalytic mechanism of LPO and the kinetics of compound III formation by probing the reactivity of ferrous LPO with hydrogen peroxide and molecular oxygen. It is shown that ferrous LPO heterolytically cleaves hydrogen peroxide forming water and oxyferryl LPO (compound II). The two-electron oxidation reaction follows second-order kinetics with the apparent bimolecular rate constant being (7.2+/-0.3) x 10(4) M(-1) s(-1) at pH 7.0 and 25 degrees C. The H2O2-mediated conversion of compound II to compound III follows also second-order kinetics (220 M(-1) s(-1) at pH 7.0 and 25 degrees C). Alternatively, compound III is also formed by dioxygen binding to ferrous LPO at an apparent bimolecular rate constant of (1.8+/-0.2) x 10(5) M(-1) s(-1). Dioxygen binding is reversible and at pH 7.0 the dissociation constant (K(D)) of the oxyferrous form is 6 microM. The rate constant of dioxygen dissociation from compound III is higher than conversion of compound III to ferric LPO, which is not affected by the oxygen concentration and follows a biphasic kinetics. A reaction cycle including the redox intermediates compound II, compound III, and ferrous LPO is proposed, which explains the observed (pseudo-)catalase activity of LPO in the absence of one-electron donors. The relevance of these findings in LPO catalysis is discussed.