Biosorbents prepared from wood particles treated with anionic polymer and iron salt: effect of particle size on phosphate adsorption

Biomass-based adsorbents have been widely studied as a cost-effective and environmentally-benign means to remove pollutants and nutrients from water. A two-stage treatment of aspen wood particles with solutions of carboxymethyl cellulose (CMC) and ferrous chloride afforded a biosorbent that was effective in removing phosphate from test solutions. FTIR spectroscopy of the biosorbent samples showed a decrease in the intensity of the carboxylate signal coinciding with a decrease in particle size. Elemental analysis results showed the iron content of both the biosorbent samples, and wood particles treated with ferrous chloride alone, to also decrease with particle size. The relationship between iron content and particle size for the biosorbent samples appeared to be a function of both the amount of CMC-Fe complex and the efficiency of removing free iron ions after treating. Sorption testing results showed a strong linear correlation between the phosphorous uptake capacities and the iron contents of the samples adjusted for losses of iron during testing. As anticipated, pretreating with the anionic polymer provided additional sites to complex iron and thereby imparted a greater phosphorous uptake capacity. Although the larger wood particles provided a greater amount of iron for phosphate removal, smaller wood particles may be preferred since they afforded the lowest release of iron relative to the amount of phosphate removed.     

Effects of bacterial treatments on wood extractives

Bacterial strains were isolated from spruce wood chips and their ability to reduce the content of wood extractives was studied. Strains were screened by cultivation on liquid media containing wood extractives as the major nutrient. Some bacterial species could decrease remarkably the amount of extractives in the liquid media and reduced the amount of triglycerides, steryl esters and total extractives by 100, 20 and 39%, respectively. Spruce wood chips were treated in controlled conditions with selected bacteria to test their effects on the chips. All the bacteria grew well on wood chips. The effect of bacterial metabolism on wood extractives was significant. Bacterial treatments reduced the amount of lipophilic extractives by 16-38% in 1 week of treatment and up to 67% in 2 weeks. The most efficient strain removed 90, 66 and 50% of triglycerides, steryl esters and resin acids, respectively, in 2 weeks. These results indicate that bacteria may be promising agents for the removal of extractives for improved pulping and papermaking processes.     

Elimination and detoxification of softwood extractives by white-rot fungi

The ability of several white-rot fungal strains to remove and detoxify acetone extractives (pitch or resin) in Scots pine sapwood was investigated in stationary laboratory batch assays. Fungal pretreatment provided up to 62% total pitch reduction and significant decreases in pitch toxicity. The best strains were Bjerkandera sp. strain BOS55, Stereum hirsutum and Trametes versicolor that eliminated over 93% of the problematic triglyceride fraction and 58–87% of other lipophilic extractive classes in only 2 weeks. Fungal removal of the wood extractives was accompanied by a 7.4–16.9-fold decrease in their inhibitory effect, as determined in the Microtox bioassay. Wood pretreatment by Bjerkandera sp. and T. versicolor caused limited losses of woody mass (less than 4% in 4 weeks); whereas S. hirsutum led to somewhat higher mass losses (7% in 4 weeks). These results indicate the potential of white rot fungi to control pitch deposition problems in pulping and to reduce the aquatic toxicity caused by naturally-occurring lipophilic extractives in forest industry effluents.     

A sustainable woody biomass biorefinery

Woody biomass is renewable only if sustainable production is imposed. An optimum and sustainable biomass stand production rate is found to be one with the incremental growth rate at harvest equal to the average overall growth rate. Utilization of woody biomass leads to a sustainable economy. Woody biomass is comprised of at least four components: extractives, hemicellulose, lignin and cellulose. While extractives and hemicellulose are least resistant to chemical and thermal degradation, cellulose is most resistant to chemical, thermal, and biological attack. The difference or heterogeneity in reactivity leads to the recalcitrance of woody biomass at conversion. A selection of processes is presented together as a biorefinery based on incremental sequential deconstruction, fractionation/conversion of woody biomass to achieve efficient separation of major components. A preference is given to a biorefinery absent of pretreatment and detoxification process that produce waste byproducts. While numerous biorefinery approaches are known, a focused review on the integrated studies of water-based biorefinery processes is presented. Hot-water extraction is the first process step to extract value from woody biomass while improving the quality of the remaining solid material. This first step removes extractives and hemicellulose fractions from woody biomass. While extractives and hemicellulose are largely removed in the extraction liquor, cellulose and lignin largely remain in the residual woody structure. Xylo-oligomers, aromatics and acetic acid in the hardwood extract are the major components having the greatest potential value for development. Higher temperature and longer residence time lead to higher mass removal. While high temperature (>200°C) can lead to nearly total dissolution, the amount of sugars present in the extraction liquor decreases rapidly with temperature. Dilute acid hydrolysis of concentrated wood extracts renders the wood extract with monomeric sugars. At higher acid concentration and higher temperature the hydrolysis produced more xylose monomers in a comparatively shorter period of reaction time. Xylose is the most abundant monomeric sugar in the hydrolysate. The other comparatively small amounts of monomeric sugars include arabinose, glucose, rhamnose, mannose and galactose. Acetic acid, formic acid, furfural, HMF and other byproducts are inevitably generated during the acid hydrolysis process. Short reaction time is preferred for the hydrolysis of hot-water wood extracts. Acid hydrolysis presents a perfect opportunity for the removal or separation of aromatic materials from the wood extract/hydrolysate. The hot-water wood extract hydrolysate, after solid-removal, can be purified by Nano-membrane filtration to yield a fermentable sugar stream. Fermentation products such as ethanol can be produced from the sugar stream without a detoxification step.     

Study of charcoal adsorption for improving the production of Xylitol from wood hydrolysates

Xylose-containing solutions, obtained from acid prehydrolysis of Eucalyptus wood, were treated with powdered charcoal in order to remove lignin-derived compounds that limit the potential of hydrolysates for making fermentation media. Both the kinetics and equilibrium of adsorption were modelled using equations reported in literature. Charcoal-pretreated hydrolysates were supplemented with nutrients and used for producing xylitol with the yeast Debaryomyces hansenii NRRL Y-7426. The susceptibility to fermentation of culture media made with this procedure was compared with those corresponding to media made from untreated wood hydrolysates or standard xylose solutions. The removal of lignin-derived compounds from hydrolysates was closely related with the efficiency of fermentation.     

Highly enhanced adsorption for decontamination of lead ions from battery wastewaters using chitosan functionalized with xanthate

Decontamination of lead ions from aqueous media has been investigated using cross linked xanthated chitosan (CMC) as an adsorbent. Various physico-chemical parameters such as contact time, amount of adsorbent, concentration of adsorbate were optimized to simulate the best conditions which can be used to decontaminate lead from aqueous media using CMC as an adsorbent. The atomic absorption spectrometric technique was used to determine the distribution of lead. Maximum adsorption was observed at both pH 4 and 5. The adsorption data followed both Freundlich and Langmuir isotherms. Langmuir isotherm gave a saturated capacity of 322.6+/-1.2mg/g at pH 4. From the FTIR spectra analysis, it was concluded that xanthate and amino group participate in the adsorption process. The developed procedure was successfully applied for the removal of lead ions from real battery wastewater samples.     

Effect of water extraction on sugars recovery from steam exploded olive tree pruning

Biomass of olive tree pruning can be considered a suitable raw material for the production of ethanol due to its high content of potentially fermentable carbohydrates. However its high extractives content could cause condensation reactions between extractives and acid insoluble lignin during pretreatment, hindering the enzymatic hydrolysis of pretreated material. In this work, the effect of extractives removal before steam explosion of olive tree pruning was evaluated. The objectives are to recover as much glucose as possible in the extraction stage and to avoid the condensation reactions. The effect of temperature and time of water extracted material on sugars recovery was studied using a response surface method according to a central composite design. Extractive removal previous to steam explosion resulted in 20% more total sugars recovery in comparison to a material without water extraction stage.     

Improved pretreatment of lignocellulosic biomass using enzymatically-generated peracetic acid

Release of sugars from lignocellulosic biomass is inefficient because lignin, an aromatic polymer, blocks access of enzymes to the sugar polymers. Pretreatments remove lignin and disrupt its structure, thereby enhancing sugar release. In previous work, enzymatically generated peracetic acid was used to pretreat aspen wood. This pretreatment removed 45% of the lignin and the subsequent saccharification released 97% of the sugars remaining after pretreatment. In this paper, the amount of enzyme needed is reduced tenfold using first, an improved enzyme variant that makes twice as much peracetic acid and second, a two-phase reaction to generate the peracetic acid, which allows enzyme reuse. In addition, the eight pretreatment cycles are reduced to only one by increasing the volume of peracetic acid solution and increasing the temperature to 60 °C and the reaction time to 6 h. For the pretreatment step, the weight ratio of peracetic acid to wood determines the amount of lignin removed.     

Removal of methylene blue dye from aqueous solutions by natural clinoptilolite and clinoptilolite modified by iron oxide nanoparticles

Adsorption techniques are widely used to remove industrial wastewater contaminants, especially non-biodegradable colourants. In this study, Iranian zeolite clinoptilolite was synthesised using magnetic iron oxide as an inexpensive and efficient adsorbent. The results showed that using natural zeolite, the removal efficiency of 26.8.6% at pH?=?3 reached 48% at pH?=?9. However, the adsorption capacity of the modified clinoptilolite did not change by increasing pH; it ranged from 96.4% to 98.6%. Moreover, increase in the initial concentration of the dye did not have any effects on the removal efficacy of the modified clinoptilolite. Using natural zeolite, on the other hand, the adsorption capacity showed a significant decrease and reached less than 10% at the 200?mg/l dye concentration. At the optimal contact time of 45?min, the dye removal rate by the modified zeolite was more than 98% at the optimal dose of 0.5?g. Indeed, the adsorption isotherm complied with Freundlich equation. Overall, the results showed that in comparison to the natural zeolite, the adsorption capacity of the clinoptilolite modified by iron nanoparticles increased significantly due to the uniformity of the cavities and increase in the surface of the adsorbent.     

Dioxin-like polychlorinated biphenyl adsorbent obtained from enzymatic saccharification residue of lignocellulose

In this study, the effective utilization of lignocellulose residue as an adsorbent was investigated. Japanese cypress wood flour subjected to hydrothermal pretreatment and ball-mill grinding was saccharified with an enzyme. The residual wood flour was carbonized and activated by physical and chemical activation to produce adsorbents for persistent organic pollutant removal. The adsorption properties were investigated by pore analysis using the N₂ adsorption/desorption isotherm and adsorption tests for dioxin-like polychlorinated biphenyls in a hexane solution. The obtained adsorbents showed high production yields and adsorption properties for dioxin-like polychlorinated biphenyls.     

Fungal degradation of lipophilic extractives in eucalyptus globulus wood

Solid-state fermentation of eucalypt wood with several fungal strains was investigated as a possible biological pretreatment for decreasing the content of compounds responsible for pitch deposition during Cl2-free manufacture of paper pulp. First, different pitch deposits were characterized by gas chromatography (GC) and GC-mass spectrometry (MS). The chemical species identified arose from lipophilic wood extractives that survived the pulping and bleaching processes. Second, a detailed GC-MS analysis of the lipophilic fraction after fungal treatment of wood was carried out, and different degradation patterns were observed. The results showed that some basidiomycetes that decreased the lipophilic fraction also released significant amounts of polar extractives, which were identified by thermochemolysis as originating from lignin depolymerization. Therefore, the abilities of fungi to control pitch should be evaluated after analysis of compounds involved in deposit formation and not simply by estimating the decrease in the total extractive content. In this way, Phlebia radiata, Funalia trogii, Bjerkandera adusta, and Poria subvermispora strains were identified as the most promising organisms for pitch biocontrol, since they degraded 75 to 100% of both free and esterified sterols, as well as other lipophilic components of the eucalypt wood extractives. Ophiostoma piliferum, a fungus used commercially for pitch control, hydrolyzed the sterol esters and triglycerides, but it did not appear to be suitable for eucalypt wood treatment because it increased the content of free sitosterol, a major compound in pitch deposits.     

Removal of cadmium from aqueous solution by Nordmann fir (Abies nordmanniana (Stev.) Spach. Subsp. nordmanniana) leaves

The utility of Nordmann fir (Abies nordmanniana (Stev.) Spach. Subsp. nordmanniana) leaves from Eastern Black Sea region for the removal (sorption) of metal ions from aqueous solutions was investigated. For this, the optimum values of pH, time, metal concentration, leaf concentration, leaf particle size and adsorption capacity were determined. Also the recovery conditions of the metals from leaves were studied. Cd metal was selected because of its toxic properties. Freundlich isotherm model was used to describe the adsorption behaviour and the experimental results obtained for Cd(2+) adsorption, followed this model well. The utility of Nordmann fir leaves to remove toxic metals from aqueous solutions was proved. Hence, this study showed that the leaves of Nordmann fir can provide cheap source as biosorbents for toxic metal removal from natural or wastewaters.     

Potential use of green algae as a biosorbent for hexavalent chromium removal from aqueous solutions

The hexavalent chromium Cr(VI) poses a threat as a hazardous metal and its removal from aquatic environments through biosorption has gained attention as a viable technology of bioremediation. We evaluated the potential use of three green algae (Cladophora glomerata, Enteromorpha intestinalis and Microspora amoena) dry biomass as a biosorbent to remove Cr(VI) from aqueous solutions. The adsorption capacity of the biomass was determined using batch experiments. The adsorption capacity appeared to depend on the pH. The optimum pH with the acid-treated biomass for Cr(VI) biosorption was found to be 2.0 at a constant temperature, 45?°C. Among the three genera studied, C. glomerata recorded a maximum of 66.6% removal from the batch process using 1.0?g dried algal cells/100?ml aqueous solution containing an initial concentration of 20?mg/L chromium at 45?°C and pH 2.0 for 60?min of contact time. Langmuir and Freundlich isotherm equations fitted to the equilibrium data, Freundlich was the better model. Our study showed that C. glomerata dry biomass is a suitable candidate to remove Cr(VI) from aqueous solutions.     

Removal and recovery of phosphorus from water by means of adsorption onto orange waste gel loaded with zirconium

Orange waste, an available biomass, was immobilized with zirconium(IV) to investigate its feasibility for phosphate removal from an aquatic environment. Kinetics, effects of pH and foreign anions, and the adsorption isotherm for phosphate have been examined. The adsorption capacity has been compared to that of two commercially available adsorbents such as zirconium ferrite and MUROMAC XMC 3614. The prepared gel was an effective adsorption gel for phosphate removal with a reasonably high sorption capacity of 57mg-P/g, which was four times higher than that of zirconium ferrite. The highest removal of phosphate was observed at low pH, whereas higher pH suppressed phosphate removal, but even up to pH 9 more than 85% phosphate removal was observed. Adsorbed phosphate was eluted by NaOH solution. Fixed bed column-mode experiments confirmed the complete adsorption of phosphate in continuous-mode operation. Throughout the operating conditions, zirconium was not leaked.     

Pyrolysis temperature and steam activation effects on sorption of phosphate on pine sawdust biochars in aqueous solutions

Biochar can be used as an adsorbent for phosphate removal in aquatic environments to treat eutrophication problems. Designing biochars that have large phosphate adsorption capacity through altering pyrolysis conditions and applying activation techniques will improve phosphate removal efficiency. In this study, four pine sawdust biochars were produced at 300 and 550 °C with and without steam activation. Batch sorption experiments including isotherm and kinetic studies were conducted to understand how phosphate removal capabilities and adsorption mechanisms of biochars were affected by pyrolysis temperature and steam activation. Our results showed that the steam activation and pyrolysis temperature did not affect phosphate adsorption by the biochars. The four biochars removed <4% of phosphate from the aqueous solution, which were not affected by the pH of the solution and biochar application rate. The repulsion forces between biochar surfaces and phosphate ions were likely the cause of the low adsorption.     

Fungal Degradation of Lipophilic Extractives in Eucalyptus globulus Wood

Solid-state fermentation of eucalypt wood with several fungal strains was investigated as a possible biological pretreatment for decreasing the content of compounds responsible for pitch deposition during Cl₂-free manufacture of paper pulp. First, different pitch deposits were characterized by gas chromatography (GC) and GC-mass spectrometry (MS). The chemical species identified arose from lipophilic wood extractives that survived the pulping and bleaching processes. Second, a detailed GC-MS analysis of the lipophilic fraction after fungal treatment of wood was carried out, and different degradation patterns were observed. The results showed that some basidiomycetes that decreased the lipophilic fraction also released significant amounts of polar extractives, which were identified by thermochemolysis as originating from lignin depolymerization. Therefore, the abilities of fungi to control pitch should be evaluated after analysis of compounds involved in deposit formation and not simply by estimating the decrease in the total extractive content. In this way, Phlebia radiata, Funalia trogii, Bjerkandera adusta, and Poria subvermispora strains were identified as the most promising organisms for pitch biocontrol, since they degraded 75 to 100% of both free and esterified sterols, as well as other lipophilic components of the eucalypt wood extractives. Ophiostoma piliferum, a fungus used commercially for pitch control, hydrolyzed the sterol esters and triglycerides, but it did not appear to be suitable for eucalypt wood treatment because it increased the content of free sitosterol, a major compound in pitch deposits.     

Bacterial biodegradation of extractives and patterns of bordered pit membrane attack in pine wood

Wood extractives, commonly referred to as pitch, cause major problems in the manufacturing of pulp and paper. Treatment of nonsterile southern yellow pine chips for 14 days with Pseudomonas fluorescens, Pseudomonas sp., Xanthomonas campestris, and Serratia marcescens reduced wood extractives by as much as 40%. Control treatments receiving only water lost 11% of extractives due to the growth of naturally occurring microorganisms. Control treatments were visually discolored after the 14-day incubation, whereas bacterium-treated wood chips were free of dark staining. Investigations using P. fluorescens NRRL B21432 showed that all individual resin and fatty acid components of the pine wood extractives were substantially reduced. Micromorphological observations showed that bacteria were able to colonize resin canals, ray parenchyma cells, and tracheids. Tracheid pit membranes within bordered pit chambers were degraded after treatment with P. fluorescens NRRL B21432. P. fluorescens and the other bacteria tested appear to have the potential for biological processing to substantially reduce wood extractives in pine wood chips prior to the paper making process so that problems associated with pitch in pulp mills can be controlled.     

Heavy metals (Cd, Pb, Zn, Ni, Cu and Cr(III)) removal from water in Malaysia: post treatment by high quality limestone

This paper presents the results of research on heavy metals removal from water by filtration using low cost coarse media which could be used as an alternative approach to remove heavy metals from water or selected wastewater. A series of batch studies were conducted using different particle media (particle size 2.36-4.75 mm) shaken with different heavy metal solutions at various pH values to see the removal behaviour for each metal. Each solution of cadmium (Cd), lead (Pb), zinc (Zn), nickel (Ni), copper (Cu) and chromium (Cr(III)) with a concentration of 2 mg/L was shaken with the media. At a final pH of 8.5, limestone has significantly removed more than 90% of most metals followed by 80% and 65% removals using crushed bricks and gravel, respectively. The removal by aeration and settlement methods without solid media was less than 30%. Results indicated that the removal of heavy metals was influenced by the media and not directly by the pH. Investigations on the removal behaviour of these metals indicated that rough solid media with the presence of carbonate were beneficial for the removal process. Adsorption and precipitation as metals oxide and probably as metals carbonate were among the two mechanisms that contributed to the removal of metals from solution.     

Fixation,leachability, and decay resistance of wood treated with some commercial extracts and wood preservative salts

Beech (Fagus orientalis) and Scots pine (Pinus sylvestris) wood blocks were treated with some commercial extracts as well as water-based wood preservative salts at various concentrations to increase retention and fixation. The penetration, fixation, and antifungal properties of different treatment solutions were compared with statistical analysis. Retention levels of solutions were generally higher for Scots pine wood than beech wood. The highest retention levels were seen in wood treated with sumac leaf extract and oak valonia extract. Leaching tests indicated that both wood types treated with sumac extracts showed higher retention levels than wood treated with the other fruit and bark extract solutions. Adding 1% water-based wood preservative salts to valonia and sumac leaf extracts increased the retention levels. Concentrations of more than 1% did not contribute to retention either individually or with salt additions. Three percent and higher concentrations of wood-preserving salts accelerated and increased the amount of leaching. The results showed that the extract alone was resistant to leaching. Mycological tests showed that all extractives were significantly effective against wood decay.     

Hierarchical structure of juvenile hybrid aspen xylem revealed using X-ray scattering and microtomography

X-ray scattering and microtomography (μCT) are useful techniques to reveal the structure of wood at the nano- and micrometer scales. The nanostructure of xylem in greenhouse-grown 2.5- to 3.5-month-old Populus tremula L.?×?tremuloides Michx. trees was characterized using wide-angle X-ray scattering (WAXS), and the cellular structure was investigated using μCT. For comparison, the nanostructure of wood in 2-year-old silver birch, Norway spruce and Scots pine saplings was determined. Based on the μCT results, the lengths of fiber lumina of the hybrid aspen saplings were shorter than any previous results on the lengths of wood fibers. The mean microfibril angles of the hybrid aspen saplings were significantly lower (8°–14°) than those of the birch, spruce and pine saplings (27°–35°) implicating that cellulose microfibrils were oriented nearly parallel to the cell axis in the young hybrid aspen saplings. Hybrid aspen saplings were found to contain tension wood based on the histochemical analysis and μCT images. However, typical tension wood properties, i.e. larger crystallite width and higher crystallinity than in normal wood, were detected only in a few hybrid aspen samples, while in most of the hybrid aspen saplings, the crystallite widths (3.0?±?0.1?nm) and the crystallinities (30?±?5?%) corresponded to those of normal wood. The deformations of cellulose crystallites were determined using WAXS in situ upon dehydration of the never-dried samples. In all the species studied, the cellulose unit cell dimension decreased and disorder of cellulose chains increased parallel to the chains upon drying. Also, the transverse disorder of chains increased in birch, spruce and pine, while no changes were detected in this direction in hybrid aspen. The crystallite widths and drying deformation results might indicate that the gelatinous layer has not fully developed in the young hybrid aspen saplings.