Internal symmetry in nucleotide sequences of genes encoding the dolichol cycle enzymes

In genes alg5, alg8 and swp1 of Saccharomyces cerevisiae, gpt of Schizosaccharomyces pombe and human gene alg6, encoding the dolichol cycle enzymes, a mirror type internal symmetry was found. The symmetry was detected in both complete nucleotide sequences and sequences of the first, second and third nucleotide bases of codons. In the encoding gene regions the density of single- and double-point centres of the internal symmetry for sequences of the second bases was higher in comparison with the sequences of the first and third bases of codons, whereas in the noncoding regions degrees of symmetry of the first, second and third bases sequences did not differ significantly. A clear positive correlation was revealed in the internal symmetry distribution in the second base sequences of codons in genes, on the one hand, and in the gene encoded amino acid sequences, on the other hand. The maximum internal symmetry of gene segments encoding the functionally important regions of proteins was found at the level of the second base sequences. The obtained results corroborate a hypothesis about the determining role of the second bases of codons in encoding amino acid residues. The investigation of internal symmetry in nucleotide sequences has first shown the existence of internal symmetry at the level of gene primary structure.     

A large inverted repeat sequence overlaps two acceptor splice sites in adenovirus

The distribution of nucleotide sequences resembling functional sites for mRNA splicing was examined by computer-directed searches in order to determine what factors may influence splice site selection in nuclear precursors. In particular, the distribution of large potentially stable hairpin structures or regions of extensive dyad symmetry was studied in adenovirus sequences. One region, spanning 106 nucleotides, was found at 66.4 map units, overlapping back-to-back acceptor sites for two mRNA molecules, those coding for the 100K protein and the 72K DNA binding protein, which are transcribed from opposite strands. This region displays exceptional dyad symmetry and is potentially capable of forming a single, highly stable hairpin when transcribed. It seems likely that the secondary structure as well as the primary structure of RNA plays a role in determining the correct splicing of these mRNA molecules.     

Ribozymes of the hepatitis delta virus: recent findings on their structure, mechanism of catalysis and possible applications.

Although the delta ribozymes have been studied for more than ten years the most important information concerning their structure and mechanism of catalysis were only obtained very recently. The crystal structure of the genomic delta ribozyme turns out to be an excellent example of the extraordinary properties of RNA molecules to fold into uniquely compact structures. Details of the X-ray structure have greatly stimulated further studies on the folding of the ribozymes into functionally active molecules as well as on the mechanism of RNA catalysis. The ability of the delta ribozymes to carry out general acid-base catalysis by nucleotide side chains has been assumed in two proposed mechanisms of self-cleavage. Recently, considerable progress has been also made in characterizing the catalytic properties of trans-acting ribozyme variants that are potentially attractive tools in the strategy of directed RNA degradation.     

Non-ribozyme sequences enhance self-cleavage of ribozymes derived from Hepatitis delta virus.

Analysis of the self-cleavage of ribozymes derived from the genomic RNA of Hepatitis delta virus (HDV) has revealed that certain co-transcribed vector sequences significantly affect the activity of the ribozyme. Specifically, the t1/2 of self-cleavage for a 135 nucleotide HDV RNA varied, at 42 degrees C, from 5 min to 88 min, depending on the vector-derived sequences flanking the 5' end of the ribozyme. Further analysis suggested that this phenomenon was most likely due to the interaction of vector-derived sequences with a 16 nucleotide region found at the 3' end of the ribozyme. These findings have implications for studies of ribozymes transcribed from cDNA templates, and may provide information regarding the catalytic structure of the HDV ribozyme.     

Selective cleavage of bcr-abl chimeric RNAs by a ribozyme targeted to non-contiguous sequences.

Conventionally designed ribozymes may be unable to cleave RNA at sites which are inaccessible due to secondary structure. In addition, it may also be difficult to specifically target a conventionally designed ribozyme to some chimeric RNA molecules. Novel approaches for ribozyme targeting were developed by using the L6 bcr-abl fusion RNA as a model. Using one approach, we successfully directed ribozyme nucleation to a site on the bcr-abl RNA that is distant from the GUA cleavage site. These ribozymes bound to the L6 substrate RNA via an anchor sequence that was complementary to bcr sequences. The anchor was necessary for efficient cleavage as the anchor minus ribozyme, a conventionally designed ribozyme, was inefficient at catalyzing cleavage at this same site. The effect of anchor sequences on catalytic rates was determined for two of these ribozymes. Ribozymes generated by a second approach were designed to cleave at a CUU site in proximity to the bcr-abl junction. Both approaches have led to the development of a series of ribozymes specific for both the L6 and K28 bcr-abl chimeric RNAs, but not normal abl or bcr RNAs. The specificity of the ribozyme correlated in part with the ability of the ribozyme to bind substrate as demonstrated by gel shift analyses. Secondary structure predictions for the RNA substrate support the experimental results and may prove useful as a theoretical basis for the design of ribozymes.     

Detection of periodic patterns in RNA sequences: the first encapsidated region of the TMV RNA

A method is developed to study the periodic properties of nucleotide sequences allowing the favoured pattern of the repeating unit, as well as the length and localization of this periodic segment to be determined simultaneously. The degree of periodicity is evaluated calculating the probabilities for random occurrence of the maximal deviations of the nucleotide composition in each phase, making use of the binomial formula.The nucleotide sequence of the tobacco mosaic virus (TMV) RNA responsible for recognition of the homologous protein (“assembly origin”, AO) (Zimmern & Butler, 1977) was investigated in order to find periodic regions of primary structure which might be essential in the recognition process. As a result the most periodic segments of the AO consisting of 31 and 17 nucleotides corresponding to the schemes GAU or GA1 have been found. However, the periodicities in these regions do not exceed that expected for random sequences. It can be considered as an evidence that in addition to peculiarities of primary structure, some other features such as RNA secondary or tertiary structure are essential in this interaction.For comparison the nucleotide sequences of the other fragments of TMV RNA as well as MS2 RNA, TYMV RNA, 16S rRNA and phage fd DNA were investigated by the same method.     

Cluster analysis of mirror type internal symmetry in amino acid sequences of heterotrimeric G-protein alpha-subunit superfamily]

For the identification of mirror type internal symmetry centers in amino acid sequences (AASs) the new method, named by the method of internal symmetry scanning, was developed. The method, contrary to earlier ones, can be used for analysis of large clusters of primary structures of related proteins. The internal symmetry centres, containing both one and two amino acid residues, can be identified rapidly and effectively by the method. Additionally, the new method allow to estimate quantitatively the homology of AASs, which are antiparallel to relation of the centres. The different modifications of the method can be used for revealing of both high conservative and unequal symmetrical structures in AASs of proteins. Usually the structures coincide with functionally important regions of protein molecules. The method was used for investigation of primary structures of members of heterotrimeric G-protein a a-subunit superfamily. The positive correlation between conservativity of primary structure and distribution of mirror type internal symmetry centres was shown.     

Internal symmetry of the mirror type and repeats in molecules of the membrane-bound forms of adenylate cyclase]

The analysis of mirror type internal symmetry distribution in primary structures of different types of mammalian membrane-bound adenylyl cyclases was made. The transmembrane domain clusters determining enzyme topology in membrane, a highly conservative region of cytoplasmic domains forming both catalytic and regulatory centres of adenylyl cyclases, and the functionally important regions in variable parts of their molecules (in particular, calmodulin binding regions) are shown to have symmetrical structures. These data are in conformity with a hypothesis put forward by the authors: the centres of internal symmetry may commonly either coincide with sites responsible for protein biological activity, or be spaced in the immediate vicinity of these sites. In different types of adenylyl cyclases long repeating sequences were identified. The segmentary structures were established for some enzyme subdomains. The regions containing repeats usually displayed a symmetrical structure which confirms a positive correlation between internal symmetry of amino acid sequence and its repeat distribution.     

Suppression of BCR-ABL mRNA by various ribozymes in HeLa cells.

Ribozymes are RNA molecules with enzymatic activity that can cleave target RNA molecules in a sequence specific manner. To date, various types of ribozyme have been constructed to cleave other RNAs and such trans-acting ribozymes include hammerhead, hairpin and HDV ribozymes. External guide sequence (EGS) can also induce the suppression of a gene-expression by taking advantage of cellular RNase P. Here we compared the activities of various functional RNA cleavers both in vitro and in vivo. The first purpose of this comparison was intended to determine the best ribozyme motif with the highest activity in cells. The second purpose is to know the correlation between the activities of ribozymes in vitro and in vivo. Our results indicated that the intrinsic cleavage activity of ribozymes is not the sole determinant that is responsible for the activity of a ribozyme in cultured cells.     

A regulatory sequence near the 3'' end of sea urchin histone genes.

The 3' flanking sequences of all five histone genes have been sequenced in the histone DNA clone h19 of the sea urchin Psammechinus miliaris. A large (23 bp) and a small (10 bp) conserved sequence was found by sequence comparison, some 29-40 bp downstream from the termination codon. 12 bases of the larger homology block show a dyad symmetry. The available sequences of clone h22 of the same species and those of the histone clones pSp2 and pSp17 of Strongylocentrotus purpuratus, another sea urchin species, fit well into this comparison. Two types of sequences are involved in the dyad symmetry; one is H1, H3 and H4 specific, the other is H2A and H2B specific. If these conserved sequences are transcribed, a hairpin loop could form in the RNA molecules. This secondary structure might serve as a recognition signal for a regulatory protein.     

Mapping nucleic acid structure by hydroxyl radical cleavage

Hydroxyl radical footprinting is a widely used method for following the folding of RNA molecules in solution. This method has the unique ability to provide experimental information on the solvent accessibility of each nucleotide in an RNA molecule, so that the folding of all domains of the RNA species can be followed simultaneously at single-nucleotide resolution. In recent work, hydroxyl radical footprinting has been used, often in combination with other global measures of structure, to work out detailed folding pathways and three-dimensional structures for increasingly large and complicated RNA molecules. These include synthetic ribozymes, and group I and group II ribozymes, from yeast, the Azoarcus cyanobacterium and Tetrahymena thermophila. Advances have been made in methods for analysis of hydroxyl radical data, so that the large datasets that result from kinetic folding experiments can be analyzed in a semi-automated and quantitative manner.     

Group I-like ribozymes with a novel core organization perform obligate sequential hydrolytic cleavages at two processing sites.

A new category of self-splicing group I introns with conserved structural organization and function is found among the eukaryotic microorganisms Didymium and Naegleria. These complex rDNA introns contain two distinct ribozymes with different functions: a regular group I splicing-ribozyme and a small internal group I-like ribozyme (GIR1), probably involved in protein expression. GIR1 was found to cleave at two internal sites in an obligate sequential order. Both sites are located 3' of the catalytic core. GIR1-catalyzed transesterification reactions could not be detected. We have compared all available GIR1 sequences and propose a common RNA secondary structure resembling that of group I splicing-ribozymes, but with some important differences. The GIR1s lack most peripheral sequence components, as well as a P1 segment, and, at approximately 160-190 nt, they are the smallest functional group I ribozymes known from nature. All GIR1s were found to contain a novel 6-bp pseudoknot (P15) within their catalytic core region. Experimental support of the proposed structure was obtained from the Didymium GIR1 by RNA structure probing and site-directed mutagenesis. Three-dimensional modeling indicates a compactly folded ribozyme with the functionally essential P15 exposed in the cleft between the two principal domains P3-P8 and P4-P6.     

Ribozyme motif structure mapped using random recombination and selection

Isolating the core functional elements of an RNA is normally performed during the characterization of a new RNA in order to simplify further biochemical analysis. The removal of extraneous sequence is challenging and can lead to biases that result from the incomplete sampling of deletion variants. An impartial solution to this problem is to construct a library containing a large number of deletion constructs and to select functional RNA isolates that are at least as efficient as their full-length progenitors. Here, we use nonhomologous recombination and selection to isolate the catalytic core of a pyrimidine nucleotide synthase ribozyme. A variable-length pool of approximately 10(8) recombinant molecules that included deletions, inversions, and translocations of a 271-nucleotide-long ribozyme isolate was constructed by digesting and randomly religating its DNA genome. In vitro selection for functional ribozymes was then performed in a size-dependent and a size-independent manner. The final pools had nearly equivalent catalytic rates even though their length distributions were completely different, indicating that a diverse range of deletion constructs were functionally active. Four short sequence islands, requiring as little as 81 nt of sequence, were found within all of the truncated ribozymes and could be folded into a secondary structure consisting of three helix-loops. Our findings suggest that nonhomologous recombination is a highly efficient way to isolate a ribozyme's core motif and could prove to be a useful method for evolving new ribozyme functions from pre-existing sequences in a manner that may have played an important role early in evolution.     

Study of a cloned ribosomal operon region coding for 5.8S rRNA in the loach Misgurnus fossilis L

A fragment of the loach (Misgurnus fossilis L.) ribosomal operon containing 5.8S rDNA and adjacent regions of the internal transcribed spacer (ITS-1, and ITS-2) was sequenced. The 5'-terminal sequencing in 5.8S rDNA was corrected by analysing the primary structure of the loach 5.8S rRNA. This RNA was shown to be presented by three types of molecules; one of these was shorter by 4 nucleotides at the 5'-end because of the processing site being shifted in the rRNA precursor. The two other types differed in the 5'-terminal nucleotide (UMP or AMP). In the cloned fragment under study, the sequence of 5.8S rDNA has TMP at the 5'-terminus. The known nucleotide sequences of 5.8S rRNAs were compared in eukaryotes; as a result, conservative regions were revealed at the sites of molecule modification. All the 5.8S rRNAs of the vertebrates studied were found to have coincidences in the localization of nucleotide substitutions and other mutations (inversions and deletions). The authors propose a model for the secondary structure of ITS-1 and ITS-2 in the region of 5.8S rRNA processing.     

Metal ions in the structure and function of RNA

It is becoming increasingly clear that RNA is more than a passive carrier of genetic information. Folded RNA molecules play key roles in almost every aspect of cellular metabolism, including protein transport, RNA splicing, peptide bond formation, and translational regulation. This is facilitated by the multifunctional nature of RNA biopolymers which can serve as rigid structural scaffolds, conformational switches, and catalysts for chemical reactions. In all cases, metal ions play a crucial role in RNA function. For folded RNA molecules, the pathway for adopting proper tertiary structure, and the stabilization of that structure, depends on specific and nonspecific interactions with certain classes of metal ions. There is a rapidly expanding repertoire of RNA structural motifs that typically sequester metal ions, and these are being studied using new spectroscopic and chemical methodologies. Many ribozymes (catalytic RNA molecules) depend on metal ions as cofactors that are explicitly involved in the chemical mechanism of catalysis. All of these functions are exemplified by recent studies of group II introns, which are among the largest ribozymes found in Nature. In this case, there are specific roles for metal ions in the folding pathway, the tertiary structure and the chemical mechanism.     

Ribozyme mediated destruction of RNA in vivo.

Previous studies have demonstrated that high ribozyme to substrate ratios are required for ribozyme inhibitory function in nuclear extracts. To obtain high intracellular levels of ribozymes, tRNA genes, known to be highly expressed in most tissues, have been modified for use as ribozyme expression cassettes. Ribozyme coding sequences were placed between the A and the B box, internal promoter sequences of a Xenopus tRNAMet gene. When injected into the nucleus of frog oocytes, the ribozyme tRNA gene (ribtDNA) produces 'hammerhead' ribozymes which cleave the 5' sequences of U7snRNA, its target substrate, with high efficiency in vitro. Oocytes were coinjected with ribtDNA, U7snRNA and control substrate RNA devoid of a cleavage sequence. It was found that the ribtRNA remained localized mainly in the nucleus, whereas the substrate and the control RNA exited rapidly into the cytoplasm. However, sufficient ribtRNA migrated into the cytoplasm to cleave, and destroy, the U7snRNA. Thus, the action of targeted 'hammerhead' ribozymes in vivo is demonstrated.     

RNAlyzer—novel approach for quality analysis of RNA structural models

The continuously increasing amount of RNA sequence and experimentally determined 3D structure data drives the development of computational methods supporting exploration of these data. Contemporary functional analysis of RNA molecules, such as ribozymes or riboswitches, covers various issues, among which tertiary structure modeling becomes more and more important. A growing number of tools to model and predict RNA structure calls for an evaluation of these tools and the quality of outcomes their produce. Thus, the development of reliable methods designed to meet this need is relevant in the context of RNA tertiary structure analysis and can highly influence the quality and usefulness of RNA tertiary structure prediction in the nearest future. Here, we present RNAlyzer—a computational method for comparison of RNA 3D models with the reference structure and for discrimination between the correct and incorrect models. Our approach is based on the idea of local neighborhood, defined as a set of atoms included in the sphere centered around a user-defined atom. A unique feature of the RNAlyzer is the simultaneous visualization of the model-reference structure distance at different levels of detail, from the individual residues to the entire molecules.