Hydrothermal synthesis, characterization, and KOH activation of carbon spheres from glucose

Carbon spheres (CSs) with controllable sizes and rich in oxygen-containing groups were fabricated using a simple hydrothermal treatment of glucose. The effects of the hydrothermal parameters, including the concentration of glucose, reaction temperature, duration, and the second hydrothermal treatment were investigated. The obtained CSs were then activated using KOH for the eventual preparation of porous carbon spheres. A scanning electron microscope was used to characterize the morphology and size of the CSs. Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to analyze the functional surface groups. N₂ adsorption–desorption isotherms were used to analyze the porous structure of the CS. The results revealed that the morphologies and size distribution of the CSs can be controlled by adjusting the experimental parameters. A hydrothermal temperature between 180 and 190 °C over 4–5 h was suitable for CS formation. Under these conditions, the size of the CS increased with the concentration of glucose. Mono-dispersed CSs with good morphologies and large numbers of oxygen-containing functional groups (primarily –OH and CO) can be obtained using a 0.3 mol/L glucose solution that is hydrothermally treated at 190 °C for 4 h. The resulting CSs sizes were about 350 nm in diameter. After a second hydrothermal treatment, the sizes of CSs grew nearly 250 nm without damage to its morphology or broadening of their size distribution. Porous CSs with perfectly spherical shapes and fully developed structures (S_BET = 1282.8 m²/g, V_micro = 0.44 cm³/g) could then be obtained via KOH activation.     

Bis(diphenylphosphino)acetonitrile oxides, -sulfides and -imines: Their formation and structural features, and the remarkable structures of two lithiated derivatives

Oxidation of bis(diphenylphosphino)acetonitrile (dppmCN, 8) yields the corresponding bis-phosphinoxide system (9). Analogously, treatment of dppmCN with sulfur gave bis(diphenylphosphinsulfido)acetonitrile (10). Both compounds show very similar structures in the solid state, featuring strongly distorted U-shaped conformations. The Staudinger reaction of dppmCN with phenylazide gives rise to the formation of the bis(diphenylphosphinimino)acetonitrile product that was obtained in its ylidic P-NH tautomer form in solution and in the crystalline state. Deprotonation of the bis(diphenylphosphinchalcogenido)acetonitriles 9 and 10 gave the corresponding [NC-(Ph₂PX)₂]⁻ anions (X = O, S). Their lithio compounds show a remarkable structural diversity in dependence of the chalcogene element used. The oxygen-containing compound (13) forms an oxygen-coordinated Li⁺-bridged 12-membered heteromacrocyclic structure, whereas Li⁺ avoids sulfur coordination in 14 and exhibits a THF-stabilized Li⁺-NC-R adduct structure in the crystal.     

Non-aromatic stabilised form of 3,4-difluoropyrrole at triosmium clusters: N-H and C-H versus C-F activation

Reaction of 3,4-difluoropyrrole with the labile triosmium cluster [Os₃(CO)₁₀(CH₃CN)₂] affords products in which C-H, N-H and C-F bonds are cleaved under mild conditions. C-H and N-H bonds are cleaved to give [Os₃H(NCCFCFCH₂)(CO)₁₀] (1) a non-aromatic stabilised form of 3,4-difluoropyrrole. Thermolysis of 1 affords in moderate yields the compounds [Os₃H₂(CCCFCHNH)(CO)₉] (2) and [Os₃H₂(NCHCFCFC)(CO)₉] (3). For compound 3, C-H and N-H bonds are cleaved with concomitant migration of H atoms to the metal framework. In contrast, for compound 2 activation of C-H and C-F bonds leads to coordination of the ligand through the carbon atoms, acting as a four-electron donating species.     

Reaction of N-hydroxyguanidine with the ferrous-oxy state of a heme peroxidase cavity mutant: A model for the reactions of nitric oxide synthase

Yeast cytochrome c peroxidase was used to construct a model for the reactions catalyzed by the second cycle of nitric oxide synthase. The R48A/W191F mutant introduced a binding site for N-hydroxyguanidine near the distal heme face and removed the redox active Trp-191 radical site. Both the R48A and R48A/W191F mutants catalyzed the H₂O₂ dependent conversion of N-hydroxyguanidine to N-nitrosoguanidine. It is proposed that these reactions proceed by direct one-electron oxidation of NHG by the Fe⁺⁴O center of either Compound I (Fe⁺⁴O, porph⁺) or Compound ES (Fe⁺⁴O, Trp⁺). R48A/W191F formed a Fe⁺²O₂ complex upon photolysis of Fe⁺²CO in the presence of O₂, and N-hydroxyguanidine was observed to react with this species to produce products, distinct from N-nitrosoguanidine, that gave a positive Griess reaction for nitrate + nitrite, a positive Berthelot reaction for urea, and no evidence for formation of NO. It is proposed that HNO and urea are produced in analogy with reactions of nitric oxide synthase in the pterin-free state.     

Mononuclear and tetranuclear palladacycles with terdentate [C,N,N] and [C,N,O] Schiff base ligands. C-H versus C-Br activation reactions

Reaction of the Schiff base ligands 2-Br-4,5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂ (a) and 4,5-(OCH₂CH₂)C₆H₃C(H)NCH₂CH₂NMe₂ (b) with Pd(OAc)₂ or K₂[PdCl₄] leads to the mononuclear cyclometallated compounds [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N,N}(OCOMe)] (1a) and [Pd{4,5-(OCH₂CH₂)C₆H₂C(H)NCH₂CH₂NMe₂-C6,N,N}(Cl)] (1b), derived from C-H activation at the C6 carbon. Treatment of a with Pd₂(dba)₃ gave [Pd{4-5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂-C2,N,N}(Br)] (2a), via C-Br activation.The metathesis reaction of 1a with aqueous sodium chloride gave [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N,N}(Cl)] (3a), with exchange of the acetate group by a chloride ligand. Treatment of the cyclometallated monomers 1a-3a with PPh₃ in a 1:1 molar ratio yielded the mononuclear complexes [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N}(L)(PPh₃)] (L: OAc, 4a; Cl, 5a) and [Pd{4-5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂-C2,N}(Br)(PPh₃)] (6a), with Pd-NMe₂ bond cleavage. However, treatment of a solution of 3a or 2a with silver trifluoromethanesulfonate, followed by reaction with PPh₃ in acetone yielded the cyclometallated complexes [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N,N}(PPh₃)][CF₃SO₃] (7a) and [Pd{4-5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂-C2,N,N}(PPh₃)][CF₃SO₃] (8a), respectively, where the Pd-NMe₂ bond was retained.The reaction of the ligands 2-Br-4,5-(OCH₂O)C₆H₂C(H)N(2′-OH-5′-^tBuC₆H₃) (c) and 4,5-(OCH₂CH₂)C₆H₃C(H)N(2′-OH-5′-^tBuC₆H₃) (d) with Pd(OAc)₂ gave the tetranuclear complexes [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)N(2′-O-5′-^tBuC₆H₃)-C6,N,O}]₄ (1c) and [Pd{4,5-(OCH₂CH₂)C₆H₂C(H)N(2′-O-5′-^tBuC₆H₃)-C6,N,O}]₄ (1d), respectively. Treatment of 1c with PPh₃ in 1:4 molar ratio, gave the mononuclear species [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)N(2′-(O)-5′-^tBuC₆H₃)-C6,N,O}(PPh₃)] (2c) with opening of the polynuclear structure after P-O_bridging bond cleavage.The structure of compounds 2a, 1c and 1d has been determined by X-ray diffraction analysis.     

Different coordination modes of an aryl-substituted hydrotris(pyrazolyl)borate ligand in rhodium and iridium complexes

Complexes Tp^tolRh(C₂H₄)₂ (1a) and Tp^tolRh(CH₂C(Me)C(Me)CH₂) (1b) have been prepared by reaction of KTp^tol with the appropriate [RhCl(olefin)₂]₂ dimer (Tp^tol means hydrotris(3-p-tolylpyrazol-1-yl)borate). The two complexes show a dynamic behaviour that involves exchange between κ² and κ³ coordination modes of the Tp^tol ligand. The iridium analogue, Tp^tolIr(CH₂C(Me)CHCH₂) (2) has also been synthesized, and has been converted into the Ir(III) dinitrogen complex [(κ⁴-N,N’,N’’,C-Tp^tol)Ir(Ph)(N₂) (3) by irradiation with UV light under a dinitrogen atmosphere. Compound 3 constitutes a rare example of Ir(III)-N₂ complex structurally characterized by X-ray crystallography. Its N₂ ligand can be easily substituted by acetonitrile or ethylene upon heating and denticity changes in the Tp^tol ligand, from κ⁴-N,N’,N’’,C (monometallated Tp^tol, from now on represented as Tp^tol′) to κ⁵-N,N′,N″,C,C″ (dimetallated Tp^tol ligand, represented as Tp^tol″) have been observed. When complex 3 is heated in the presence of acetylene, dimerization of the alkyne takes place to yield the enyne complex [(κ⁵-N,N′,N′′,C,C′-Tp^tol)Ir(CH₂CHCCH), 7¸ in which the unsaturated organic moiety is bonded to iridium through the carbon-carbon double bond.     

Spectroscopic characterization of cytochrome P450 Compound I

The cytochrome P450 protein-bound porphyrin complex with the iron-coordinated active oxygen atom as Fe(IV)O is called Compound I (Cpd I). Cpd I is the intermediate species proposed to hydroxylate directly the inert carbon–hydrogen bonds of P450 substrates. In the natural reaction cycle of cytochrome P450 Cpd I has not yet been detected, presumably because it is very short-lived. A great variety of experimental approaches has been applied to produce Cpd I artificially aiming to characterize its electronic structure with spectroscopic techniques. In spite of these attempts, none of the spectroscopic studies of the last decades proved capable of univocally identifying the electronic state of P450 Cpd I. Very recently, however, Rittle and Green [9] have shown that Cpd I of CYP119, the thermophillic P450 from Sulfolobus acidocaldarius, is univocally a Fe(IV)O–porphyrin radical with the ferryl iron spin (S = 1) antiferromagnetically coupled to the porphyrin radical spin (S′ = 1/2) yielding a S_tot = 1/2 ground state very similar to Cpd I of chloroperoxidase from Caldariomyces fumago. In this mini-review the efforts to characterize Cpd I of cytochrome P450 by spectroscopic methods are summarized.     

Experimental and theoretical study of the arrangement, electronic structure and properties of neutral paramagnetic binuclear nitrosyl iron complexes with azaheterocyclic thyolyls having ‘S-C-N type’ coordination of bridging ligands

Geometrical and electronic structures of neutral paramagnetic binuclear nitrosyl iron complexes with azaheterocyclic thyolyls [Fe₂(μ-SR)₂)(NO)₄] with bridging ligands: aminomercaptotriazolyl, RC₂N₃H(NH₂) (1), mercaptoimidazolyl, RC₃N₂H₃ (2), methylmercaptoimidazolyl, RC₃N₂H₂CH₃ (3), and dihydromercaptoimidazolyl, RC₃N₂H₅ (4) have been calculated by the methods of density functional, B3LYP and PBE. Coordination of bridging ligands corresponds to ‘S-C-N type’, more energetically preferable than μ-S type coordination. This results in big Fe?Fe distances, with the value of intramolecular exchange interaction being inconsiderable; therefore the complexes are paramagnetic at ambient temperature, with effective magnetic moment about 2.5 Bohr magneton. The interaction of the Fe atoms spins and intermolecular exchange are antiferromagnetic, and this should be taken into account while describing the temperature dependence of magnetic susceptibility. The electronic configuration of the Fe(NO)₂ unit with one unpaired electron (similar to that in binuclear diamagnetic complexes) forms due to binding of spin 3/2 of Fe⁺d⁷ center with oppositely oriented spins 1/2 of two NO groups. Theoretical approaches describe satisfactorily not only the experimental structure of the complexes but also their IR spectra.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Synthesis and characterisation of isomeric cycloaurated complexes derived from the iminophosphorane Ph3PNC(O)Ph

Using different organomercury substrates, two isomeric cycloaurated complexes derived from the stabilised iminophosphorane Ph₃PNC(O)Ph were prepared. Reaction of Ph₃PNC(O)Ph with PhCH₂Mn(CO)₅ gave the manganated precursor (CO)₄Mn(2-C₆H₄C(O)NPPh₃), metallated on the C(O)Ph substituent, which yielded the organomercury complex ClHg(2-C₆H₄C(O)NPPh₃) by reaction with HgCl₂ in methanol. Transmetallation of the mercurated derivative with Me₄N[AuCl₄] gave the cycloaurated iminophosphorane AuCl₂(2-C₆H₄C(O)NPPh₃) with an exo PPh₃ substituent. The endo isomer AuCl₂(2-C₆H₄Ph₂PNC(O)Ph) [aurated on a PPh₃ ring] was obtained by an independent reaction sequence, involving reaction of the diarylmercury precursor Hg(2-C₆H₄P(NC(O)Ph)Ph₂)₂ [prepared from the known compound Hg(2-C₆H₄PPh₂)₂ and PhC(O)N₃] with Me₄N[AuCl₄]. Both of the isomeric iminophosphorane derivatives were structurally characterised, together with the precursors (2-HgClC₆H₄)C(O)NPPh₃ and (CO)₄Mn(2-C₆H₄C(O)NPPh₃). The utility of ³¹P NMR spectroscopy in monitoring reaction chemistry in this system is described.     

Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

Platinum allenylidene complexes and formation of platinum and palladium acetonitrile alkynyl complexes

The platinum(0) complex [Pt(PPh₃)₄] reacts with brominated propargylic amides and esters in benzene by oxidative addition to give trans-[Br(PPh₃)₂Pt-CC-C(O)R] complexes whereas no reaction occurs when halogenated solvents (CH₂Cl₂, CHCl₃) are used. The cis-ligands PPh₃ can be replaced by P(ⁱPr)₃ and the bromide by trifluoroacetate. O-Alkylation of those trans-[X(PR′₃)₂Pt-CC-C(O)R] complexes (X = Br, CF₃COO; R′ = Ph, ⁱPr) derived from propargylic amides with MeOTf or [Me₃O]BF₄ in CH₂Cl₂ gives the first cationic monoallenylidene complexes of platinum, trans-[X(PR′₃)₂PtCCC(OMe)NR₂]⁺Y⁻ (Y = OTf, BF₄). In contrast, trans-[Br(PPh₃)₂Pt-CC-C(O)OMenthyl] derived from a propargylic ester does not react with MeOTf in CH₂Cl₂. However, in acetonitrile instead of O-methylation the substitution of acetonitrile for the bromide ligand to yield the cationic acetonitrile alkynyl platinum complex trans-[MeCN(PPh₃)₂Pt-CC-C(O)OMenthyl]⁺OTf⁻ is observed. The related palladium complexes trans-[X(PR′₃)₂Pd-CC-C(O)OR] (X = Br, CF₃COO; R′ = Ph, ⁱPr, R = menthyl, Et) react with MeOTf or [Et₃O]BF₄ analogously affording trans-[MeCN(PR′₃)₂Pd-CC-C(O)OR]⁺Y⁻ (Y = OTf, BF₄).     

Synthesis and solid-state structures of (triphos)iridacyclopentadiene complexes as models for vinylidene intermediates in the [2 + 2 + 1] cyclotrimerization of alkynes

The iridium 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos) complexes [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(NCMe)]BF₄ (2-NCMe, R = CO₂Me) and [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(CO)]BF₄ (2-CO, R = CO₂Me) serve as models for proposed iridium-vinylidene intermediates of relevance to the [2 + 2 + 1] cyclotrimerization of alkynes. The solid-state structures of 2-NCMe, 2-CO, and [κ²(C¹,C⁴)-CRCRCRCR]{CH₃C(CH₂PPh₂)₃}Ir(Cl) (2-Cl), were determined by X-ray crystallography.     

Stepwise reactions of two N-CH2CN or two N-CH2C(NH)OMe groups attached to macrocyclic copper(II) complexes: Preparation of homo- and hetero-di-N-functionalized macrocyclic complexes

The hetero-functionalized macrocyclic complex [CuL²](ClO₄)₂ bearing one N-CH₂C(NH)OMe and one N-CH₂CN groups as well as [CuL³](ClO₄)₂ bearing two N-CH₂C(NH)OMe groups have been prepared selectively by the reaction of [CuL¹](ClO₄)₂ (L² = 2,13-bis(cyanomethyl)-5,16-dimethyl-2,6,13,17-tetraazatricyclo[16.4.0.^1.180^7.12]docosane) with methanol. The N-CH₂C(NH)OCH₃ group in [CuL²](ClO₄)₂ is quite inert against acid hydrolysis. On the other hand, the functional pendant arms in [CuL³](ClO₄)₂ readily undergo acid hydrolysis. Both [CuL⁴](ClO₄)₂ bearing one N-CH₂COOCH₃ and one N-CH₂C(NH)OCH₃ groups and [CuL⁵](ClO₄)₂ bearing two N-CH₂OOCH₃ groups have been prepared by the stepwise hydrolysis of [CuL³](ClO₄)₂. The reactivity of the functional pendant arms in [CuL¹](ClO₄)₂ or [CuL³](ClO₄)₂ is quite different from that in [NiL¹](ClO₄)₂ or [NiL³](ClO₄)₂. The crystal structure of [CuL²](ClO₄)₂ shows that the complex has a slightly distorted square-pyramidal coordination polyhedron with an apical Cu-N (N-CH₂C(NH)OCH₃ group) bond. The N-CH₂C(NH)OCH₃ and/or N-CH₂COOCH₃ groups in [CuL³](ClO₄)₂, [CuL⁴](ClO₄)₂, and [CuL⁵](ClO₄)₂ are involved in coordination, and the complexes have distorted trans-octahedral coordination polyhedron. The axial Cu-N (N-CH₂C(NH)OCH₃ group) distance (2.396(7) Å) of [CuL⁴](ClO₄)₂ is considerably longer than the Cu-N (N-CH₂C(NH)OCH₃ group) distance (2.169(3) Å) of [CuL²](ClO₄)₂.     

Synthesis and characterization of η-cyclopentadienyl-silylallyl niobium and tantalum complexes

Reaction of the disilylcyclopentadiene 1,1-[SiMe₂(CH₂CHCH₂)]₂C₅H₄ with NbCl₅ gave the new allylsilyl-substituted monocyclopentadienyl niobium complex [Nb{η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}Cl₄]. This compound was reacted with LiNHtBu or NH₂tBu to give the imido derivative [Nb{η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}(NtBu)Cl₂], which was further alkylated to the imido alkyl complexes [Nb{η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}(NtBu)R₂] (R = Me, CH₂Ph) and [Nb{η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}(NtBu)Cl (CH₂Ph)]. Reaction of the imido complexes with the corresponding lithium cyclopentadienides gave the dicyclopentadienyl-imido complexes [M(η⁵-C₅R₅){η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}(NtBu)Cl] (M = Nb, Ta; R = H, Me). Metallocene dichlorides [M(η⁵-C₅R₅){η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}Cl₂] (M = Nb, Ta; R = H, Me) were easily prepared by reduction with Na/Hg and simultaneous transmetallation of [Ta(η⁵-C₅R₅)Cl₄] with Li[C₅H₄SiMe₂(CH₂CHCH₂)] and of [Nb{η⁵-C₅H₄SiMe₂(CH₂CHCH₂)}Cl₄] with Li(C₅R₅). All of the new compounds have been characterized by elemental analysis, and IR and NMR spectroscopy.     

Ferrocene- and ruthenocene-containing chalcones: A spectroscopic and electrochemical study

Chalcones of the type Mc-CO-CHCH-Ph, Ph-CO-CHCH-Mc and Mc-CO-CHCH-Mc with Mc = Fc = ferrocenyl or Rc = ruthenocenyl, and Ph = phenyl were synthesized. Synthesis was achieved by base catalyzed Claisen-Schmidt condensation of the appropriated acetyl and aldehyde in ethanol. Cyclic voltammetry in CH₃CN in the presence of 0.1 mol dm⁻³ [N(Bu)₄][PF₆] revealed chemical and electrochemical reversible behaviour for the Fc/Fc⁺ couple and irreversible electrochemistry for the two electron Rc/Rc²⁺ couple. The potential ranges for the Fc/Fc⁺ couple varied in the range 138 ? E°′ ? 302 mV while E_pa for Rc/Rc²⁺ couple was between 358 and 510 mV vs. FcH/FcH⁺, the internal standard. Chalcones with the carbonyl group adjacent to the metallocene, are more difficult to oxidize.     

Synthesis and reactivity of gold(III) complexes containing cycloaurated iminophosphorane ligands

Transmetallation reactions of ortho-mercurated iminophosphoranes (2-ClHgC₆H₄)Ph₂PNR with [AuCl₄]⁻ gives new cycloaurated iminophosphorane complexes of gold(III) (2-Cl₂AuC₆H₄)Ph₂PNR [R = (R,S)- or (S)-CHMePh, p-C₆H₄F, ^tBu], characterised by NMR and IR spectroscopies, ESI mass spectrometry and an X-ray structure determination on the chiral derivative R = (S)-CHMePh. The chloride ligands of these complexes can be readily replaced by the chelating ligands thiosalicylate and catecholate; the resulting derivatives show markedly higher anti-tumour activity versus P388 murine leukaemia cells compared to the parent chloride complexes. Reaction of (2-Cl₂AuC₆H₄)Ph₂PNPh with PPh₃ results in displacement of a chloride ligand giving the cationic complex [(2-Cl(PPh₃)AuC₆H₄)Ph₂PNPh]⁺, indicating that the PN donor is strongly bonded to the gold centre.