Effects of different forms of chitosan on intercellular junctions of mouse fibroblasts in vitro

Chitosan is a linear polysaccharide that has many biomedical applications. We compared the effects of chitosan, in both solution and membranous form, on intercellular adhesion of Swiss 3T3 mouse fibroblasts. Cells were grown as spheroidal cell cultures. Some control cell spheroids were cultured without chitosan and two experimental groups were cultured with chitosan. Chitosan in solution was used for one experimental group and chitosan in membranous form was used for the other. For each group, intercellular adhesion was investigated on days 5 and 10 of culture. Transmission electron microscopy revealed well-defined cellular projections that were more prominent in cells exposed to either membranous or solution forms of chitosan than to the chitosan-free control. Immunocytochemical staining of ICAM-1 and e-cadherin was used to determine the development of intercellular junctions. Compared to the weakly stained control, strong reactions were observed in both chitosan exposed groups at both 5 and 10 days. Cells were treated with 5-bromo-2-deoxyuridine (BrdU) and incubated with anti-BrdU primary antibody to assess proliferation. Both the solution and membranous forms of chitosan increased proliferation at both 5 and 10 days. Cellular viability was assessed using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT). The MTT assay indicated high cell viability; maximum viability was obtained with the solution form of chitosan at day 5. Chitosan exposure increased the number of intercellular junctions and showed a significant proliferative effect on 3T3 mouse fibroblasts.     

ADAM15 overexpression in NIH3T3 cells enhances cell-cell interactions.

ADAM15 is a member of the family of metalloprotease-disintegrins that have been shown to interact with integrins in an RGD- and non-RGD-dependent manner. In the present study, we examined the effects of ADAM15 overexpression on cell-matrix and cell-cell interactions in NIH3T3 cells. Tetracycline-regulated ADAM15 overexpression in NIH3T3 cells leads to an inhibition of migration on a fibronectin-coated filter in a Boyden chamber assay and in a scratch wound model. The effects of ADAM15 overexpression on cell migration are not due to changes in matrix attachment or to the lack of extracellular signal-regulated kinase signaling response to PDGF or fibronectin. However, a decrease in monolayer permeability with ADAM15 overexpression and altered cell morphology suggest a possible increase in cell-cell interaction. Analysis of adhesion of NIH3T3 cells to a polyclonal population of cells retrovirally transduced to overexpress ADAM15 demonstrates a 45% increase in cell adhesion, compared with enhanced green fluorescent protein-expressing control cells. In addition, we demonstrate localization of HA-epitope-tagged ADAM15 to cell-cell contacts in an epithelial cell line that forms extensive cell-cell contact structures. Thus, overexpression of ADAM15 in NIH3T3 cells appears to enhance cell-cell interactions, as suggested by decreased cell migration, altered cell morphology at the wound edge, decreased monolayer permeability, and increased cell adhesion to monolayers of cells expressing ADAM15 by retroviral transduction.     

Differences in density of Concanavalin A-binding sites due to differences in surface morphology of suspended normal and transformed 3T3 fibroblasts.

Calculations of the density of Concanavalin A (Con A)-binding sites on normal and transformed fibroblasts have, as yet, been based on the unproven assumption that suspended cells are smooth spheres. We studied the surface morphology of suspended normal and transformed fibroblasts with scanning and transmission electron microscopes, and found a large difference in surface morphology between suspended normal and transformed 3T3 cells. When this difference in surface morphology was taken into account, the estimated cell surface area of normal 3T3 cells was approximately seven times larger than that of transformed 3T3 cells. Since equal numbers of 3H-Con A molecules are bound on normal and transformed cells, the density of Con A-binding sites is approximately seven times greater on transformed than on normal 3T3 cells. The difference in density of Con A-binding sites between normal and transformed fibroblasts might be sufficient to explain the difference in agglutination response, as originally suggested by Burger, and may also be the cause of the different degrees of clustering of Con A-binding sites on the plasma membrane of these cells.     

Locomotory behavior, contact inhibition, and pattern formation of 3T3 and polyoma virus-transformed 3T3 cells in culture

The social behavior of 3T3 cells and their polynoma virus-transformed derivative (Py3T3 cells) was examined by time-lapse cinemicrography in order to determine what factors are responsible for the marked differences in the patterns formed by the two cell lines in culture. Contrary to expectations, both cell types have been found to exhibit contact inhibition of cell locomotion. Therefore, the tendency of 3T3 cells to form monolayers and of Py3T3 cells to form crisscrossed multilayers cannot be explained on the basis of the presence versus the absence of contact inhibition. Morevover, with the exception of cell division control, the social behavior of the two cell types is qualitively similar. Both exhibit cell underlapping and, after contact between lamelliopodia, both show inhibition of locomotory activity and adhesion formation. Neither cell type was observed to migrate over the surface of another cell. The two cell types do show quantitative differences in the frequency of underlapping, the frequency with which contact results in inhibition of locomotion, and the proportion of the cell margin that adheres to the substratum. The increased frequency pf Py3T3 underlapping is correlated with the reduced frequency of substratum adhesions, which in turn favors underlapping. On the basis of these observations, it is concluded that the differences in culture patterns are the result of differences in the shapes of the individual cells, such that underlapping, and hence crisscrossing, is favored in Py3T3 cell interactions and discouraged in 3T3 cells.     

Cell adhesion to fibronectin and tenascin: quantitative measurements of initial binding and subsequent strengthening response

Cell-substratum adhesion strengths have been quantified using fibroblasts and glioma cells binding to two extracellular matrix proteins, fibronectin and tenascin. A centrifugal force-based adhesion assay was used for the adhesive strength measurements, and the corresponding morphology of the adhesions was visualized by interference reflection microscopy. The initial adhesions as measured at 4 degrees C were on the order of 10(-5)dynes/cell and did not involve the cytoskeleton. Adhesion to fibronectin after 15 min at 37 degrees C were more than an order of magnitude stronger; the strengthening response required cytoskeletal involvement. By contrast to the marked strengthening of adhesion to FN, adhesion to TN was unchanged or weakened after 15 min at 37 degrees C. The absolute strength of adhesion achieved varied according to protein and cell type. When a mixed substratum of fibronectin and tenascin was tested, the presence of tenascin was found to reduce the level of the strengthening of cell adhesion normally observed at 37 degrees C on a substratum of fibronectin alone. Parallel analysis of corresponding interference reflection micrographs showed that differences in the area of cell surface within 10-15 nm of the substratum correlated closely with each of the changes in adhesion observed: after incubation for 15 min on fibronectin at 37 degrees C, glioma cells increased their surface area within close contact to the substrate by integral to 125- fold. Cells on tenascin did not increase their surface area of contact. The increased surface area of contact and the inhibitory activity of cytochalasin b suggest that the adhesive "strengthening" in the 15 min after initial binding brings additional adhesion molecules into the adhesive site and couples the actin cytoskeleton to the adhesion complex.     

Interaction of liposome with immobilized chitosan during main phase transition

It has been recently demonstrated that chitosan in aqueous solution alters the phase behavior and structure of a phospholipid bilayer (Fang, N.; et al. Biomacromolecules 2001, 2, 1161-1168). Until now, the physical driving forces between chitosan and the phospholipid bilayer upon their initial encounter remains unknown. In this study, confocal reflectance interference contrast microscopy (C-RICM), phase contrast microscopy and bioadhesion modeling are concurrently applied to probe the interaction of phospholipid vesicle with immobilized chitosan at various temperatures, pH, and osmotic stress. First, the successful immobilization of chitosan on amino-silanized glass is indicated by the increases in both the degree of vesicle deformation and adhesion energy of vesicles adhering on chitosan modified substrate in comparison with those on amino-silanized glass. Second, the phase transition of a phospholipid bilayer does not modulate the adhesion strength at the chitosan-biomembrane interface at pH 7.4. With increase of the degree of protonation on the chitsoan backbone at pH 4, the adhesion energy is increased by 5-fold for vesicles of all sizes compared to that in pH 7.4. Furthermore, pH reduction amplifies the thermal-induced response of larger vesicles on the immobilized chitosan layer. Interestingly, a moderate increase of osmotic stress maximizes the degree of vesicle deformation and adhesion energy at 23 degrees C and dampens the effect of phase transition on vesicle adhesion. Overall, this study demonstrates the quantitation of chitosan-biomembrane interactions that will be critical for future applications of chitosan in biological systems.     

Surface morphology and agglutinability with concanavalin A in normal and transformed murine fibroblasts

The surface morphology of attached and suspended normal and transformed fibroblasts has been studied with the scanning electron microscope. Normal murine fibroblasts (3T3) grow in vitro with widely extended leading lamellae. During most parts of the cell cycle the surfaces of these cells are practically free of microvilli. When the cells round up for mitosis, their cell surfaces become adorned with many microvilli. In contrast, simian virus 40-transformed fibroblasts (SV3T3) grow more compact, and their cell surfaces remain smooth throughout the life cycle. When confluent 3T3 and SV3T3 cells are suspended with ethylenediaminetetraacetic acid (EDTA) for agglutination assays, similar differences in surface morphology are found: 3T3 cells always bear many microvilli, whereas most SV3T3 cells are essentially free of microvilli. The addition of concanavalin A (Con A) does not influence the surface morphology of the suspended cells. The morphological differences described here may be important for the agglutination process of the normal and transformed 3T3 cells, because they affect the real cell surface area and thus the density of Con A-binding sites.     

Modulation of adhesion,spreading and cytoskeleton organization of 3T3 fibroblasts by sulfonic groups present on polymer surfaces

The early phase of 3T3 fibroblast interaction with sulfonated styrene copolymer surfaces, of two sulfonic group densities and thus of differing wettability, was studied. The sulfonic groups present on copolymer surfaces affected the behaviour of cells, i.e. they stimulated cell adhesion, activated cell spreading and influenced cytoskeleton reorganization. The relative number of adhering cells correlated, while the number of spreading cells inversely correlated, with the surface density of sulfonic groups. Cell shape and the pattern of distribution of F-actin, alpha-actinin and vinculin in the interacting cells also depend on the surface density of sulfonic groups. On surfaces of high sulfonic group density, highly polarized cells were observed with F-actin bundles. On surfaces of low sulfonic group density, the cells spread with a square-like morphology with F-actin organized in stress fibres. In contrast, the cells spread poorly on nonsulfonated surfaces and cell adhesion was unaffected by surface wettability. The contribution of alpha(5)beta(1), alpha(4), and beta(5)integrins to the cell interaction with fibronectin (FN) and vitronectin (VN) adsorbed from serum-containing medium on polymer surfaces was examined. Our results suggest that surface sulfonic groups influence the conformation of FN and VN adsorbed on polymer surfaces and, in turn, determine the integrins that are involved in cell adhesion.     

Cell surface morphology and adhesive properties of normal and virally transformed cells treated with tunicamycin, an inhibitor of protein glycosylation

Normal and virally transformed mouse (3T3) fibroblasts were treated with tunicamycin, a fungal antibiotic that specifically inhibits the synthesis of peptidyl asparaginyl-linked oligosaccharides. All cell lines exhibited changes in cell surface morphology, surface-associated proteins and adhesion to the culture plate in the presence of tunicamycin. Scanning electron microscopy (SEM) revealed that treated fibroblasts assumed a spherical shape and were partially detached from the substratum. In addition, the 3T3 cells showed numerous cell surface ruffles. Tunicamycin-treated cells exhibited no marked ultrastructural changes when compared with control cells. There were indications, however, that the rough endoplasmic reticulum was dilated and that there were fewer membrane-bound ribosomes in treated 3T3 cells. Surface iodination of pretrypsinized tunicamycin-treated cells, followed by analysis of the labeled proteins on sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis, showed a marked reduction in a cell surface protein, identical or similar to fibronectin. Both tunicamycin-treated 3T3 and transformed 3T3 cells demonstrated a reduction in plating efficiency as shown by attachment assays of viable cells. In addition, treated cells showed a reduction in adhesiveness and a delay in spreading. The latter changes were more pronounced in the virally transformed cell lines. These findings suggest that cell surface glycoproteins, including fibronectin, play a role in determining the surface morphology and adhesive properties of cells.     

Cellular responses to substrate topography: role of myosin II and focal adhesion kinase

Although two-dimensional cultures have been used extensively in cell biological research, most cells in vivo exist in a three-dimensional environment with complex topographical features, which may account for at least part of the striking differences between cells grown in vivo and in vitro. To investigate how substrate topography affects cell shape and movement, we plated fibroblasts on chemically identical polystyrene substrates with either flat surfaces or micron-sized pillars. Compared to cells on flat surfaces, 3T3 cells on pillar substrates showed a more branched shape, an increased linear speed, and a decreased directional stability. These responses may be attributed to stabilization of cell adhesion on pillars coupled to myosin II-dependent contractions toward pillars. Moreover, using FAK-/- fibroblasts we showed that focal adhesion kinase, or FAK, is essential for the responses to substrate topography. We propose that increased surface contact provided by topographic features guides cell migration by regulating the strength of local adhesions and contractions, through a FAK- and myosin II-dependent mechanism.     

Cell adhesion and cell surface topography in aggregates of 3T3 and SV40-virus-transformed 3T3 cells. Visualization of interior cells by scanning electron microscopy

A technique for exposing the interior of aggregates of cultured cells has been developed and is described in this report. Using this technique, we have examined for the first time, by scanning electron microscopy, cell morphology and cell contact ultrastructure in the interior of aggregates of BALB/c 3T3 and SV40-transformed 3T3 cells. The 3T3 cells make initial intercellular contact by means of microvillar processes. Over a period of 3-8 h, some of these microvillar contacts are replaced by broader projections. In contrast, the SV40-transformed cells make initial intercellular contact by means of blebs or blunt projections which are also broadened and extended over a period of 3-8 h. For both 3T3 and SV40-3T3 cells, the surfaces of the cells which form the outer layer of the aggregate resemble the surfaces of single cells fixed in suspension, regardless of how long the aggregates have been cultured. Thse cells are covered with many cellular processes and are roughly hemispherical in profile. The surfaces of the internal cells of the aggregates, however, lose many of their cellular processes, develop smooth patches, and many become irregular in shape. This smooth morphology was also observed on the interior surfaces of the peripheral cell layer. From these observations we conclude that: (a) the stabilization of adhesive contacts is a slow process which takes at least 3-8 h; (b) the outer surfaces of peripheral cells differ significantly from the surfaces of interior cells; and (c) clear differences in surface topography exist between nonmalignant 3T3 cells and their malignant SV40 transformants.     

c-Cbl regulates migration of v-Abl-transformed NIH 3T3 fibroblasts via Rac1

Cellular events like cell adhesion and migration involve complex rearrangements of the actin cytoskeleton. We have previously shown that the multidomain adaptor protein c-Cbl facilitates actin cytoskeletal reorganizations that result in the adhesion of v-Abl-transformed NIH 3T3 fibroblasts. In this report, we demonstrate that c-Cbl also enhances migration of v-Abl-transformed NIH 3T3 fibroblasts. This effect of c-Cbl depends on its tyrosine phosphorylation, specifically on phosphorylation of its Tyr-731, which is required for binding of PI-3' kinase to c-Cbl. Furthermore, we demonstrate that the effect of c-Cbl on migration of v-Abl-transformed fibroblasts is mediated by active PI-3' kinase and the small GTPase Rac1. Our results also indicate that ubiquitin ligase activity of c-Cbl is required, while spatial localization of c-Cbl to the pseudopodia is not required for the observed effects of c-Cbl on cell migration.     

In vitro MC3T3 osteoblast adhesion with respect to surface roughness of Ti6Al4V substrates

This work investigates the role of the surface roughness of Ti6Al4V on the cell morphology, proliferation and adhesion, and in particular on the variation of the expression of cell adhesion proteins. Standardised test samples with five different surface preparations are used: sandblasted, 80, 1200, and 4000 grade polished, mirror polished. Surface roughness is analysed by Scanning Electron Microscopy and LASER Confocal Microscopy. Cell culture experiments are performed with MC3T3-E1 mouse osteoblasts after 3 days culture: proliferation rate, morphology and adhesion are assessed. The variations of expression of cell adhesion proteins are evidenced by indirect immune fluorescence method: actin from the cytoskeleton, vinculin from the focal adhesion complex, fibronectin and collagen I from the extracellular matrix. The results reveal a clear influence of surface roughness of Ti6Al4V on cell proliferation, morphology and adhesion. A significant correlation is established between surface roughness and cell growth. More the surface is smooth more the osteoblasts proliferate and appear spread out on the test samples. In addition, the expression of adhesion proteins varies with respect to the surface roughness. These results indicate a direct relationship between the decrease of cell adhesion and the increase of cell proliferation on mirror polished materials.     

Inhibition of Escherichia coli and Proteus mirabilis adhesion and biofilm formation on medical grade silicone surface

Silicone has been utilized extensively for biomedical devices due to its excellent biocompatibility and biodurability properties. However, its surface is easily colonized by bacteria which will increase the probability of nosocomial infection. In the present work, a hydrophilic antimicrobial carboxymethyl chitosan (CMCS) layer has been grafted on medical grade silicone surface pre-treated with polydopamine (PDA). The increase in hydrophilicity was confirmed from contact angle measurement. Bacterial adhesion tests showed that the PDA-CMCS coating reduced the adhesion of Escherichia coli and Proteus mirabilis by ≥ 90%. The anti-adhesion property was preserved even after the aging of the functionalized surfaces for 21 days in phosphate-buffered saline (PBS), and also after autoclaving at 121°C for 20 min. Both E. coli and P. mirabilis readily form biofilms on the pristine surface under static and flow conditions but with the PDA-CMCS layer, biofilm formation is inhibited. The flow experiments indicated that it is more difficult to inhibit biofilm formation by the highly motile P. mirabilis as compared to E. coli. No significant cytotoxicity of the modified substrates was observed with 3T3 fibroblasts.     

Dominant negative mutation in cell surface beta 1,4- galactosyltransferase inhibits cell-cell and cell-matrix interactions

In addition to its traditional location within the Golgi complex, beta 1,4-galactosyltransferase (GalTase) is also present on the cell surface, where it is thought to function as a cell adhesion molecule by binding to extracellular oligosaccharide ligands. Recent studies suggest that cells contain two forms of GalTase with distinct cytoplasmic domains. The longer form of GalTase contains a 13-amino acid cytoplasmic extension and is preferentially targeted to the plasma membrane, relative to the shorter GalTase protein that is confined primarily to the Golgi compartment. In this study, we created a dominant negative mutation that interferes with the function of cell surface GalTase by transfecting into cells cDNAs encoding truncated versions of the long form of GalTase containing the complete cytoplasmic and transmembrane domains, but devoid of the catalytic domain. In both F9 embryonal carcinoma cells and Swiss 3T3 fibroblasts, overexpressing the truncated long GalTase (TLGT) protein displaced the endogenous cell surface GalTase from its association with the cytoskeleton, resulting in a loss of intercellular adhesion and cell spreading specifically on matrices that use GalTase as a cell surface receptor. In contrast, overexpressing the analogous truncated short GalTase (TSGT) protein did not affect cell morphology or GalTase activity. In control assays, inducing the TLGT protein had no effect on cell interactions with fibronectin (which is independent of GalTase), or on the cytoskeleton attachment of another matrix receptor (beta 1 integrin), or on overall glycoprotein synthesis, thus eliminating nonspecific effects of the TLGT protein on cellular adhesion and metabolism. These results represent the first molecular manipulation of cell surface GalTase expression and confirm its function as a cell adhesion molecule. These studies further suggest that the cytoskeleton contains a defined, saturable number of binding sites for GalTase, which enables it to function as an adhesion molecule.     

The fibronectin cell attachment sequence Arg-Gly-Asp-Ser promotes focal contact formation during early fibroblast attachment and spreading

Cultured fibroblasts form focal contacts (FCs) associated with actin microfilament bundles (MFBs) during attachment and spreading on serum- or fibronectin (FN)-coated substrates. To determine if the minimum cellular adhesion receptor recognition signal Arg-Gly-Asp-Ser (RGDS) is sufficient to promote FC and MFB formation, rat (NRK), hamster (Nil 8), and mouse (Balb/c 3T3) fibroblasts in serum-free media were plated on substrates derivatized with small synthetic peptides containing RGDS. These cultures were studied with interference reflection microscopy to detect FCs, Normarski optics to identify MFBs, and immunofluorescence microscopy to observe endogenous FN fiber formation. By 1 h, 72-78% of the NRK and Nil 8 cells plated on RGDS-containing peptide had focal contacts without accompanying FN fibers, while these fibroblasts lacked FCs on control peptide. This early FC formation was followed by the appearance of coincident MFBs and colinear FN fibers forming fibronexuses at 4 h. NRK and Nil 8 cultures on substrates coated with native FN or 75,000-D FN-cell binding fragment showed similar kinetics of FC and MFB formation. In contrast, the Balb/c 3T3 mouse fibroblasts plated on Gly-Arg-Gly-Asp-Ser peptide-derivatized substrates, or on coverslips coated with 75,000-D FN cell-binding fragment, were defective in FC formation. These results demonstrate that the apparent binding of substrate-linked RGDS sequences to cell surface adhesion receptors is sufficient to promote early focal contact formation followed by the appearance of fibronexuses in some, but not all, fibroblast lines.     

Growth characteristics of skin fibroblasts and 3T3 cells entrapped by polymerizing fibrin

Summary Skin fibroblasts as well as 3T3 cells were cultured after entrapping freshly prepared cells in medium containing polymerizing fibrin. In contrast to cells grown on plastic substratum, fibrin-clot-cultured cells became highly elongated forming strands of cells. The strands interconnected by lateral cellular protrusions so that horizontal networks of cells were present throughout the clots. Cell growth as well as stretching were dependent upon the concentrations of fibrin. Highest growth rates were obtained with low fibrin concentrations (0.3 mg fibrinogen per ml). As shown by deprivation experiments nutritional limitations appear to be responsible for differences in growth rates observed in fibrin clots of higher density. In this system the fibrin meshwork serves as substratum for adhesion, elongation and multiplication of fibroblasts. The method makes it possible to study single cells in culture and the effects of persistent microenivronmental influences. This work was supported by Deutsche Forschungsgemeinschaft.     

Multicellular sprouting in vitro

Cell motility and its guidance through cell-cell contacts is instrumental in vasculogenesis and in other developmental or pathological processes as well. During vasculogenesis, multicellular sprouts invade rapidly into avascular areas, eventually creating a polygonal pattern. Sprout elongation, in turn, depends on a continuous supply of endothelial cells, streaming along the sprout toward its tip. As long-term videomicroscopy of in vitro cell cultures reveal, cell lines such as C6 gliomas or 3T3 fibroblasts form multicellular linear arrangements in vitro, similar to the multicellular vasculogenic sprouts. We show evidence that close contact with elongated cells enhances and guides cell motility. To model the patterning process we augmented the widely used cellular Potts model with an inherently nonequilibrium interaction whereby surfaces of elongated cells become more preferred adhesion substrates than surfaces of well-spread, isotropic cells.     

An RGD spacing of 440 nm is sufficient for integrin alpha V beta 3- mediated fibroblast spreading and 140 nm for focal contact and stress fiber formation

The synthetic peptide Gly-Arg-Gly-Asp-Tyr (GRGDY), which contains the RGD sequence of several adhesion molecules, was covalently grafted to the surface of otherwise poorly adhesive glass substrates and was used to determine the minimal number of ligand-receptor interactions required for complete spreading of human foreskin fibroblasts. Well-defined adhesion substrates were prepared with GRGDY between 10(-3) fmol/cm2 and 10(4) fmol/cm2. As the adhesion ligand surface concentration was varied, several distinct morphologies of adherent cells were observed and categorized. The population of fully spread cells at 4 h reached a maximum at 1 fmol/cm2, with no further increases up to 10(4) fmol/cm2. Although maximal cell spreading was obtained at 1 fmol/cm2, focal contacts and stress fibers failed to form at RGD surface concentrations below 10 fmol/cm2. The minimal peptide spacings obtained in this work correspond to 440 nm for spreading and 140 nm for focal contact formation, and are much larger than those reported in previous studies with adsorbed adhesion proteins, adsorbed RGD-albumin conjugates, or peptide-grafted polyacrylamide gels. Vitronectin receptor antiserum specific for integrin alpha V beta 3 blocked cell adhesion and spreading on substrates containing 100 fmol/cm2 of surface-bound GRGDY, while fibronectin receptor antiserum specific for alpha 5 beta 1 did not. Furthermore, alpha V beta 3 was observed to cluster into focal contacts in spread cells, but alpha 5 beta 1 did not. It was thus concluded that a peptide-to-peptide spacing of 440 nm was required for alpha V beta 3-mediated cellular spreading, while 140 nm was required for alpha V beta 3-mediated focal contact formation and normal stress fiber organization in human foreskin fibroblasts; these spacings represent much fewer ligands than were previously thought to be required.     

The interaction of epidermal keratinocytes and fibroblasts during the formation of a live skin equivalent]

The effect of human fetal fibroblasts and adult keratinocytes on collagen contraction was studied. Keratinocytes embedded in collagen lattices did not spread and produced only a slight contraction. When keratinocytes were seeded on the surface of tht gel, the contraction began within 24 h and correlated with the formation of epithelial colonies. Transplantation of multilayered epithelial sheets on the gel significantly accelerated the onset of contraction. Keratinocytes seeded on and fibroblasts grown in collagen lattices cooperatively contracted the gel, and keratinocytes were able to stimulate gel contraction even when they had no contact with the collagen roughly populated with fibroblasts. Swiss 3T3 cells remained spherical in collagen lattices and did not contract the gel but when cultivated with keratinocytes they stimulated gel contraction. In their turn, keratinocytes influenced the behaviour of Swiss 3T3 cells which elongated and produced processes. We suggest that both keratinocytes and mesenchymal cells can affect gel contraction 1) by a direct contact with collagen lattices, and 2) through potentiation of the ability of another cell type to contract the gel.