Substrate requirements of human rhinovirus 3C protease for peptide cleavage in vitro

A series of synthetic peptides representing authentic proteolytic cleavage sites of human rhinovirus type 14 were assayed as substrates for purified 3C protease. Competition cleavage assays were employed to determine the relative specificity constants (Kcat/Km) for substrates with sequences related to the viral 2C-3A cleavage site. Variable length peptides representing the 2C-3A cleavage site were cleaved with comparable efficiency. These studies defined a minimum substrate of 6 amino acids (TLFQ/GP), although retention of the residue at position P5 (ETLFQ/GP) resulted in a better substrate by an order of magnitude. Amino acid substitutions at position P5, P4, P1', or P2' indicated that the identity of the residue at position P5 was not critical, whereas substitutions at position P4, P1' or P2' resulted in substrates with Kcat/Km values varying over 2 orders of magnitude. In contrast to the 2C-3A cleavage site, small peptide derivatives representative of the 3A-3B cleavage site were relatively poor substrates, which suggested that residues flanking the minimum core sequence may influence susceptibility to cleavage. The 3C protease of rhinovirus type 14 was also capable of cleaving peptides representing comparable cleavage sites predicted for coxsackie B virus and poliovirus.     

Human rhinovirus 3C protease: cloning and expression of an active form in Escherichia coli

A cDNA encoding the viral protease from the 3C region of human rhinovirus type 14 was expressed in Escherichia coli through the use of a periplasmic secretion vector. The recombinant protease contained an eight amino acid N-terminal extension that enabled its detection by a specific antibody. It was expressed at a level of approximately 1 mg/L of E. coli culture. Biological activity of the protease was assessed in vitro by using a chemically synthesized peptide consisting of a consensus picornavirus protease cleavage site, Arg-Ala-Glu-Leu-Gln-Gly-Pro-Tyr-Asp-Glu. The peptide was cleaved by the recombinant protease at the Gln-Gly bond, generating the product peptides Arg-Ala-Glu-Leu-Gln and Gly-Pro-Tyr-Asp-Glu, which could be separated from the substrate peptide by reversed-phase HPLC. An in vitro assay for the rhinovirus 3C protease was developed by observing the rate of disappearance of the substrate peak from chromatograms of the supernatants of digestion mixtures.     

Expression and processing of human rhinovirus type 14 polypeptide precursors in Escherichia coli maxicells

Human rhinovirus serotype-14 (HRV-14) cDNA, encompassing 87.9% of the coding region, was subcloned in an Escherichia coli expression vector, generating plasmid pKCC101. HRV-14 polypeptides encoded by pKCC101 were synthesized in E. coli maxicells. Pulse-chase experiments with pKCC110, a smaller derivative of pKCC101 containing the protease 3C coding region, have clearly demonstrated the proteolysis of a 55-kDa precursor to several polypeptides, including a doublet with the expected size of protease 3C (20 kDa). The proteolysis of the 55-kDa precursor polypeptide was prevented by ZnCl2, a known inhibitor of picornavirus 3C proteases. Results with a derivative of pKCC110 (pKCC115) which is partially deleted for the protease 3C sequence, support the idea that the doublet proteins are specified by the protease 3C coding region. Taken together, our investigations indicate that the precursor form of protease 3C must be responsible for its own cleavage.     

The expression and purification of human rhinovirus protease 3C

Human rhinovirus type 14 protease 3C was expressed as a soluble and active protein in Escherichia coli. The protease was purified by a cationic-exchange step followed by gel filtration on a TSK 3000 column. The final yield of purified protease was in the range 0.5-1.0 mg/l culture grown to A550 = 1.0. Sequence analysis revealed that greater than 90% of the N-terminal residues were methionine. The enzyme activity of the purified protease was measured by cleavage of a synthetic peptide representing a predicted Gln/Gly viral polyprotein cleavage site. A mutant protease (Cys146----Ser) was produced and purified in the same way. The yield of mutant protease 3C was approximately 150 micrograms/l from a culture grown to A550 = 1.0. This mutant protease 3C did not cleave the synthetic peptide substrate.     

Beta-secretase cleavage at amino acid residue 34 in the amyloid beta peptide is dependent upon gamma-secretase activity

The amyloid beta peptides (Abeta) are the major components of the senile plaques characteristic of Alzheimer's disease. Abeta peptides are generated from the cleavage of amyloid precursor protein (APP) by beta- and gamma-secretases. Beta-secretase (BACE), a type-I transmembrane aspartyl protease, cleaves APP first to generate a 99-amino acid membrane-associated fragment (CT99) containing the N terminus of Abeta peptides. Gamma-secretase, a multi-protein complex, then cleaves within the transmembrane region of CT99 to generate the C termini of Abeta peptides. The production of Abeta peptides is, therefore, dependent on the activities of both BACE and gamma-secretase. The cleavage of APP by BACE is believed to be a prerequisite for gamma-secretase-mediated processing. In the present study, we provide evidence both in vitro and in cells that BACE-mediated cleavage between amino acid residues 34 and 35 (Abeta-34 site) in the Abeta region is dependent on gamma-secretase activity. In vitro, the Abeta-34 site is processed specifically by BACE1 and BACE2, but not by cathepsin D, a closely related aspartyl protease. Moreover, the cleavage of the Abeta-34 site by BACE1 or BACE2 occurred only when Abeta 1- 40 peptide, a gamma-secretase cleavage product, was used as substrate, not the non-cleaved CT99. In cells, overexpression of BACE1 or BACE2 dramatically increased the production of the Abeta 1-34 species. More importantly, the cellular production of Abeta 1-34 species induced by overexpression of BACE1 or BACE2 was blocked by a number of known gamma-secretase inhibitors in a concentration-dependent manner. These gamma-secretase inhibitors had no effect on enzymatic activity of BACE1 or BACE2 in vitro. Our data thus suggest that gamma-secretase cleavage of CT99 is a prerequisite for BACE-mediated processing at Abeta-34 site. Therefore, BACE and gamma-secretase activity can be mutually dependent.     

Steady-state cleavage kinetics for dengue virus type 2 ns2b-ns3(pro) serine protease with synthetic peptides

The N-terminal part of the NS3 protein from dengue virus contains a trypsin-like serine protease responsible for processing the nonstructural region of the viral polyprotein. Enzymatic activity of the NS2B-NS3(pro) precursor incorporating a full-length NS2B cofactor of dengue virus type 2 was examined by using synthetic dodecamer peptide substrates encompassing native cleavage sequences of the NS2A/NS2B, NS2B/NS3, NS3/NS4A and NS4B/NS5 polyprotein junctions. Cleavage of the dansylated substrates was monitored by a HPLC-based assay and kinetic parameters for K(1M), k(cat) and k(cat)/K(m) were obtained. The data presented here show that NS2B-NS3(pro) expressed in recombinant E. coli can be renatured to an active protease which reacts in the absence of microsomal membranes with all 4 substrate peptides, albeit the molecule does not exhibit autoproteolytic processing at the NS2B/NS3 site. A marked difference in cleavage efficiency was found for the NS2B/NS3 substrate and the remaining 3 peptides based on the NS2A/NS2B, NS3/NS4A and NS4A/NS5 cleavage sites.     

Rhinovirus 3C protease catalyzes efficient cleavage of a fluorescein-labeled peptide affording a rapid and robust assay.

The 3C protease encoded by human rhinovirus type 2 catalyzes with equal efficiency cleavage of a peptide substrate with or without a fluorescein label attached to the amino acid at the P7' position. Substrates Ac-MEALFQGPLQYKDL-NH2 and MEALFQGPLQYKE(fluorescein)L are hydrolyzed with values of Vmax/KM of 970 M-1 s-1 and 1100 M-1 s-1, respectively. With the labeled substrate, HPLC achieves separation of substrate and product in 2.5 min. Separation in as little as 12 s is feasible. Fluorescein was derivatized so that it could be incorporated into peptides using automated solid-phase peptide synthesis.     

Human rhinovirus 3C protease: a cysteine protease showing the trypsin(ogen)-like fold

Viral-encoded proteases cleave precursor polyprotein(s) leading to maturation of infectious virions. Strikingly, human rhinovirus 3C protease shows the trypsin(ogen)-like serine protease fold based on two topologically equivalent six-stranded β-barrels, but displays residue Cys147 as the active site nucleophile. By contrast, papain, which is representative of most cysteine proteases, does not display the trypsin(ogen)-like fold. Remarkably, in human rhinovirus 3C cysteine protease, the catalytic residues Cys147, His40 and Glu71 are positioned as Ser195, His57 and Asp102, respectively, building up the catalytic triad of serine proteases in the chymotrypsin–trypsin–elastase family. However, as compared to trypsin-like serine proteases and their zymogens, residue His40 and the oxyanion hole of human rhinovirus 3C cysteine protease, both key structural components of the active site, are located closer to the protein core. Human rhinovirus 3C cysteine protease cleaves preferentially GlnGly peptide bonds or, less commonly, the GlnSer, GlnAla, GluSer or GluGly pairs. Finally, human rhinovirus 3C cysteine protease and the 3CD cysteine protease–polymerase covalent complex bind the 5′ non-coding region of rhinovirus genomic RNA, an essential function for replication of the viral genome.     

Activity of purified hepatitis C virus protease NS3 on peptide substrates.

The protease domain of the hepatitis C virus (HCV) protein NS3 was expressed in Escherichia coli, purified to homogeneity, and shown to be active on peptides derived from the sequence of the NS4A-NS4B junction. Experiments were carried out to optimize protease activity. Buffer requirements included the presence of detergent, glycerol, and dithiothreitol, pH between 7.5 and 8.5, and low ionic strength. C- and N-terminal deletion experiments defined a peptide spanning from the P6 to the P4' residue as a suitable substrate. Cleavage kinetics were subsequently measured by using decamer P6-P4' peptides corresponding to all intermolecular cleavage sites of the HCV polyprotein. The following order of cleavage efficiency, in terms of kcat/Km, was determined: NS5A-NS5B > NS4A-NS4B >> NS4B-NS5A. A 14-mer peptide containing residues 21 to 34 of the protease cofactor NS4A (Pep4A 21-34), when added in stoichiometric amounts, was shown to increase cleavage rates of all peptides, the largest effect (100-fold) being observed on the hydrolysis of the NS4B-NS5A decamer. From the kinetic analysis of cleavage data, we conclude that (i) primary structure is an important determinant of the efficiency with which each site is cleaved during polyprotein processing, (ii) slow cleavage of the NS4B-NS5A site in the absence of NS4A is due to low binding affinity of the enzyme for this site, and (iii) formation of a 1:1 complex between the protease and Pep4A 21-34 is sufficient and required for maximum activation.     

Functional characterization of the cleavage specificity of the sapovirus chymotrypsin-like protease

Sapovirus is a positive-stranded RNA virus with a translational strategy based on processing of a polyprotein precursor by a chymotrypsin-like protease. So far, the molecular mechanisms regulating cleavage specificity of the viral protease are poorly understood. In this study, the catalytic activities and substrate specificities of the predicted forms of the viral protease, the 3C-like protease (NS6) and the 3CD-like protease-polymerase (NS6-7), were examined in vitro. The purified NS6 and NS6-7 were able to cleave synthetic peptides (15 to 17 residues) displaying the cleavage sites of the sapovirus polyprotein, both NS6 and NS6-7 proteins being active forms of the viral protease. High-performance liquid chromatography and subsequent mass spectrometry analysis of digested products showed a specific trans cleavage of peptides bearing Gln-Gly, Gln-Ala, Glu-Gly, Glu-Pro, or Glu-Lys at the scissile bond. In contrast, peptides bearing Glu-Ala or Gln-Asp at the scissile bond (NS4-NS5 and NS5-NS6, or NS6-NS7 junctions, respectively) were resistant to trans cleavage by NS6 or NS6-7 proteins, whereas cis cleavage of the Glu-Ala scissile bond of the NS5-NS6 junction was evidenced. Interestingly, the presence of a Phe at position P4 overruled the resistance to trans cleavage of the Glu-Ala junction (NS5-NS6), whereas substitutions at the P1 and P2′ positions altered the cleavage efficiency. The differential cleavage observed is supported by a model of the substrate-binding site of the sapovirus protease, indicating that the P4, P1, and P2′ positions in the substrate modulate the cleavage specificity and efficiency of the sapovirus chymotrypsin-like protease.     

Formation of the flavivirus envelope: role of the viral NS2B-NS3 protease.

One of the late processing events in the flavivirus replication cycle involves cleavage of the intracellular form of the flavivirus capsid protein (Cint) to the mature virion form (Cvir) lacking the carboxy-terminal stretch of hydrophobic amino acids which serves as a signal peptide for the downstream prM protein. This cleavage event was hypothesized to be effected by a viral protease and to be associated with virion formation. We have proposed a model of flavivirus virion formation in which processing of the C-prM precursor at the upstream signalase site is upregulated by interaction of the NS2B part of the protease with the prM signal peptide or with an adjacent carboxy-terminal region of the capsid protein in the precursor, and processing of Cint by the NS2B-NS3 protease follows the signalase cleavage. Recently, an alternative hypothesis was proposed which suggests a reverse order of these two cleavage events, namely, that cleavage of the C-prM precursor by the NS2B-NS3 protease at the Cint-->Cvir dibasic cleavage site is a prerequisite for the subsequent signalase cleavage of the prM signal peptide. To distinguish between these alternative models, we prepared a series of expression cassettes carrying mutations at the Cint-->Cvir dibasic cleavage site and investigated the effects of these mutations on signalase processing of C-prM and on formation and secretion of prM-E heterodimers. For certain mutated C-prM precursors, namely, for those with Lys-->Gly disruption of the dibasic site, efficient formation of prM was observed upon expression from larger cassettes encoding the viral protease, despite the absence of processing at the Cint-->Cvir cleavage site. Surprisingly, formation and secretion of prM-E heterodimers accompanied by late cleavage of prM was also observed for these cassettes, with an efficiency comparable to that of the wild-type expression cassette. These observations contradict the model in which cleavage of the C-prM precursor at the Cint-->Cvir dibasic site is a prerequisite for signalase cleavage.     

Upregulation of signalase processing and induction of prM-E secretion by the flavivirus NS2B-NS3 protease: roles of protease components.

Recently, we have shown that the ability of the flavivirus NS2B-NS3 protease complex to promote efficient signalase processing of the C-prM precursor, as well as secretion of prM and E, does not appear to depend strictly on cleavage of the precursor at its Lys-Arg-Gly dibasic site by the protease. We suggested that the association of the protease with the precursor via NS2B may be sufficient by itself for the above effects. To study the proposed association in more detail, we have developed an assay in which processing at the C-prM dibasic cleavage site is abolished by Lys-->Gly conversion. We constructed deletion mutants and chimeras of the West Nile (WN) flavivirus NS2B protein and expressed them in the context of [5'-C-->NS3(243)] containing either wild-type C-prM or its cleavage site mutant. All NS2B variants were able to form active protease complexes. Deletion of the carboxy-terminal cluster of hydrophobic amino acids in NS2B had no apparent effect on the formation of prM and prM-E secretion for the cassettes containing either wild-type or mutated C-prM precursor. Deletion of the amino-terminal hydrophobic cluster in NS2B did not affect prM-E secretion for the cassettes with wild-type C-prM but abrogated prM-E secretion for the cassettes with the mutated dibasic cleavage site in C-prM. Similarly, the NS2B-NS3(178) protease of Japanese encephalitis (JE) virus, when substituted for the WN virus NS2B-NS3(243) protease, was able to promote prM-E secretion for the cassette with the wild-type C-prM precursor but not with the mutated one. Replacement of the deleted amino-terminal hydrophobic cluster in the WN virus NS2B protein with an analogous JE virus sequence restored the ability of the protease to promote prM-E secretion. On the basis of these observations, roles of individual protease components in upregulation of C-prM signalase processing are discussed.     

Regulation of hepatitis C virus polyprotein processing by signal peptidase involves structural determinants at the p7 sequence junctions

The hepatitis C virus genome encodes a polyprotein precursor that is co- and post-translationally processed by cellular and viral proteases to yield 10 mature protein products (C, E1, E2, p7, NS2, NS3, NS4A, NS4B, NS5A, and NS5B). Although most cleavages in hepatitis C virus polyprotein precursor proceed to completion during or immediately after translation, the cleavages mediated by a host cell signal peptidase are partial at the E2/p7 and p7/NS2 sites, leading to the production of an E2p7NS2 precursor. The sequences located immediately N-terminally of E2/p7 and p7/NS2 cleavage sites can function as signal peptides. When fused to a reporter protein, the signal peptides of p7 and NS2 were efficiently cleaved. However, when full-length p7 was fused to the reporter protein, partial cleavage was observed, indicating that a sequence located N-terminally of the signal peptide reduces the efficiency of p7/NS2 cleavage. Sequence analyses and mutagenesis studies have also identified structural determinants responsible for the partial cleavage at both the E2/p7 and p7/NS2 sites. Finally, the short distance between the cleavage site of E2/p7 or p7/NS2 and the predicted transmembrane alpha-helix within the P' region might impose additional structural constraints to the cleavage sites. The insertion of a linker polypeptide sequence between P-3' and P-4' of the cleavage site released these constraints and led to improved cleavage efficiency. Such constraints in the processing of a polyprotein precursor are likely essential for hepatitis C virus to post-translationally regulate the kinetics and/or the level of expression of p7 as well as NS2 and E2 mature proteins.     

Proteolysis of ProPTHrP(1-141) by "prohormone thiol protease" at multibasic residues generates PTHrP-related peptides: implications for PTHrP peptide production in lung cancer cells

The parathyroid hormone-related protein (PTHrP) precursor requires proteolytic processing to generate PTHrP-related peptide products that possess regulatory functions in the control of PTH-like (parathyroid-like) actions and cell growth, calcium transport, and osteoclast activity. Biologically active peptide domains within the PTHrP precursor are typically flanked at their NH2- and COOH-termini by basic residue cleavage sites consisting of multibasic, dibasic, and monobasic residues. These basic residues are predicted to serve as proteolytic cleavage sites for converting the PTHrP precursor into active peptide products. The coexpression of the prohormone processing enzyme PTP ("prohormone thiol protease") in PTHrP-containing lung cancer cells, and the lack of PTP in cell lines that contain little PTHrP, implicate PTP as a candidate processing enzyme for proPTHrP. Therefore, in this study, PTP cleavage of recombinant proPTHrP(1-141) precursor was evaluated by MALDI mass spectrometry to identify peptide products and cleavage sites. PTP cleaved the PTHrP precursor at the predicted basic residue cleavage sites to generate biologically active PTHrP-related peptides that correspond to the NH2-terminal domain (residues 1-37) that possesses PTH-like and growth regulatory activities, the mid-region domain (residues 38-93) that regulates calcium transport, and the COOH-terminal domain (residues 102-141) that modulates osteoclast activity. Lack of cleavage at other types of amino acids demonstrated the specificity of PTP processing at basic residue cleavage sites. Overall, these results demonstrate the ability of PTP to cleave the PTHrP precursor at multibasic, dibasic, and monobasic residue cleavage sites to generate active PTHrP-related peptides. The presence of PTP immunoreactivity in PTHrP-containing lung cancer cells suggests PTP as a candidate processing enzyme for the PTHrP precursor.     

Synthetic peptides as substrates and inhibitors of human immune deficiency virus-1 protease

Retroviruses code for a virus-specific protease which is essential for polyprotein processing and viral infectivity. The human immune deficiency virus-1 protease is an aspartic protease of 9 kDa which was synthesized by recombinant DNA technology and arises by autocatalytic processing from a polyprotein precursor which has recently been demonstrated by use of a protease-specific monoclonal antibody. The protease was shown to form dimers. Here we demonstrate that synthetic peptides can be used as both model substrates as well as inhibitors for investigation of the protease. 14 synthetic peptides, 7-18 amino acids in length, containing putative protease cleavage sites of the viral polyprotein gag and pol precursors, have been analyzed with the partially purified protease by the use of high performance liquid chromatography. In seven cases, where cleavage was observed, the length of the peptides did not significantly influence the cleavage efficiencies, heptapeptides being large enough as model substrates. No cleavage was observed with a protein preparation purified in parallel from control bacteria not expressing the human immune deficiency virus-1 protease. The protease was not only able to cut next to a proline but also between other peptides indicating that the proline is not a prerequisite. Three peptides with either reduced bonds at the cleavage site or a substitution by statin were inhibitory while another uncleaved substrate was not. The usefulness of small model substrates for characterization of the protease is further demonstrated by determination of a kinetic optimum pH (3.5-5.5) and incubation temperature (37 degrees C).     

Human CaaX protease ZMPSTE24 expressed in yeast: Structure and inhibition by HIV protease inhibitors

The function and localization of proteins and peptides containing C‐terminal “CaaX” (Cys‐aliphatic‐aliphatic‐anything) sequence motifs are modulated by post‐translational attachment of isoprenyl groups to the cysteine sulfhydryl, followed by proteolytic cleavage of the aaX amino acids. The zinc metalloprotease ZMPSTE24 is one of two enzymes known to catalyze this cleavage. The only identified target of mammalian ZMPSTE24 is prelamin A, the precursor to the nuclear scaffold protein lamin A. ZMPSTE24 also cleaves prelamin A at a second site 15 residues upstream from the CaaX site. Mutations in ZMPSTE24 result in premature‐aging diseases and inhibition of ZMPSTE24 activity has been reported to be an off‐target effect of HIV protease inhibitors. We report here the expression (in yeast), purification, and crystallization of human ZMPSTE24 allowing determination of the structure to 2.0 Å resolution. Compared to previous lower resolution structures, the enhanced resolution provides: (1) a detailed view of the active site of ZMPSTE24, including water coordinating the catalytic zinc; (2) enhanced visualization of fenestrations providing access from the exterior to the interior cavity of the protein; (3) a view of the C‐terminus extending away from the main body of the protein; (4) localization of ordered lipid and detergent molecules at internal and external surfaces and also projecting through fenestrations; (5) identification of water molecules associated with the surface of the internal cavity. We also used a fluorogenic assay of the activity of purified ZMPSTE24 to demonstrate that HIV protease inhibitors directly inhibit the human enzyme in a manner indicative of a competitive mechanism.     

Purification and characterization of poliovirus polypeptide 3CD, a proteinase and a precursor for RNA polymerase.

A cDNA clone encoding the 3CD proteinase (3CDpro) of poliovirus type 2 (Sabin), the precursor to proteinase 3Cpro and RNA polymerase 3Dpol, was expressed in bacteria by using a T7 expression system. Site-specific mutagenesis of the 3C/3D cleavage site was performed to generate active proteolytic precursors impaired in their ability to process themselves to 3Cpro and 3Dpol. Of these mutations, the exchange of the Thr residue at the P4 position of the 3C/3D cleavage site for a Lys residue (3CDpro T181K) resulted in a mutant polypeptide exhibiting the smallest amount of autoprocessing. This mutant was purified to 86% homogeneity and used for subsequent proteolytic studies. Purified 3CDproM (M designates the cleavage site mutant 3CDpro T181K) was capable of cleaving the P1 capsid precursor, a peptide representing the 2BC cleavage site, and the 2BC precursor polypeptide. Purified 3CDproM demonstrated the same detergent sensitivity in processing experiments with the capsid precursor as was observed by using P1 and crude extracts of poliovirus-infected HeLa cell lysates. Purified 3CDproM did not have any detectable RNA polymerase activity, whereas 3Dpol, separated from 3CDproM by gel filtration in the last step of purification, did. We conclude that 3CDproM can process both structural and nonstructural precursors of the poliovirus polyprotein and that it is active against a synthetic peptide substrate. Moreover, cleavage of 3CD to 3Dpol is needed to activate the 3D RNA polymerase.     

Poliovirus capsid proteins derived from P1 precursors with glutamine-valine cleavage sites have defects in assembly and RNA encapsidation.

Assembly of poliovirus virions requires proteolytic cleavage of the P1 capsid precursor polyprotein between two separate glutamine-glycine (QG) amino acid pairs by the viral protease 3CD. In this study, we have investigated the effects on P1 polyprotein processing and subsequent assembly of processed capsid proteins caused by substitution of the glycine residue at the individual QG cleavage sites with valine (QG-->QV). P1 cDNAs encoding the valine substitutions were created by site-directed mutagenesis and were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses which expressed the mutant P1 precursors. The recombinant vaccinia virus-expressed mutant P1 polyproteins were analyzed for proteolytic processing defects in cells coinfected with a recombinant vaccinia virus (VVP3) that expresses the poliovirus 3CD protease and for processing and assembly defects by using a trans complementation system in which P1-expressing recombinant vaccinia viruses provide capsid precursor to a defective poliovirus genome that does not express functional capsid proteins (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The QV-substituted precursors were proteolytically processed at the altered sites both in cells coinfected with VVP3 and in cells coinfected with defective poliovirus, although the kinetics of cleavage at the altered sites were slower than those of cleavage at the wild-type QG site in the precursor. Completely processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor containing a valine at the amino terminus of VP3 (VP3-G001V) were unstable and failed to assemble stable subviral structures in cells coinfected with defective poliovirus. In contrast, capsid proteins derived from the P1 precursor with a valine substitution at the amino terminus of VP1 (VP1-G001V) assembled empty capsid particles but were deficient in assembling RNA-containing virions. The assembly characteristics of the VP1-G001V mutant were compared with those of a previously described VP3-VP1 cleavage site mutant (K. Kirkegaard and B. Nelsen, J. Virol. 64:185-194, 1990) which contained a deletion of the first four amino-terminal residues of VP1 (VP1-delta 1-4) and which was reconstructed for our studies into the recombinant vaccinia virus system. Complete proteolytic processing of the VP1-delta 1-4 precursor also occurred more slowly than complete cleavage of the wild-type precursor, and formation of virions was delayed; however, capsid proteins derived from the VP1-G001V mutant assembled RNA-containing virions less efficiently than those derived from the VP1-delta 1-4 precursor.(ABSTRACT TRUNCATED AT 400 WORDS)     

Proteolytic cleavage of encephalomyocarditis virus capsid region substrates by precursors to the 3C enzyme.

Picornavirus protease 3C is normally released from its P3 precursor by two successive self-cleavage reactions. The free enzyme can then catalyze most of the remaining processing events within the viral polyprotein. To investigate the role of the 3C precursors in the processing cascade, we constructed cDNA clones which expressed genetically altered forms of the encephalomyocarditis P3 region in vitro. Site-specific substitutions were introduced into the Gln-Gly residues at the 3B-3C and 3C-3D junctions, and the resulting proteins were tested for their ability to self-process and to catalyze cleavage of viral capsid precursors in cell-free protease assays. We determined that three P3 region precursor proteins (3ABC, 3CD, and P3), harboring inactive cleavage sites, were as active as the free enzyme (3C) in processing assays with capsid substrates. Further, we found that in addition to the naturally occurring Gln-Gly and Gln-Ser amino acid pairs, the encephalomyocarditis 3C enzyme was able to process Gln-Cys but not Gln-Thr, Gln-Ile, Gln-Tyr, Arg-Gly, or Leu-Gly combinations when these residues were substituted into normal cleavage site contexts.     

In vitro characterization of a purified NS2/3 protease variant of hepatitis C virus

The cleavage of the hepatitis C virus polyprotein between the nonstructural proteins NS2 and NS3 is mediated by the NS2/3 protease, whereas the NS3 protease is responsible for the cleavage of the downstream proteins. Purification and in vitro characterization of the NS2/3 protease has been hampered by its hydrophobic nature. NS2/3 protease activity could only be detected in cells or in in vitro translation assays with the addition of microsomal membranes or detergent. To facilitate purification of this poorly characterized protease, we truncated the N-terminal hydrophobic domain, resulting in an active enzyme with improved biophysical properties. We define a minimal catalytic region of NS2/3 protease retaining autocleavage activity that spans residues 904-1206 and includes the C-terminal half of NS2 and the N-terminal NS3 protease domain. The NS2/3 (904-1206) variant was purified from Escherichia coli inclusion bodies and refolded by gel filtration chromatography. The purified inactive form of NS2/3 (904-1206) was activated by the addition of glycerol and detergent to induce autocleavage at the predicted site between Leu(1026) and Ala(1027). NS2/3 (904-1206) activity was dependent on zinc ions and could be inhibited by NS4A peptides, peptides that span the cleavage site, or an N-terminal peptidic cleavage product. This NS2/3 variant will facilitate the development of an assay suitable for identifying inhibitors of HCV replication.