Atomic force microscopy study of the collagen fibre structure

Observations of intact reconstituted and native collagen fibres were performed with the atomic force microscope. The results are compared between the two types of fibres and with those obtained previously with the electron microscope on freeze-etched or negative stained samples. Some of the findings presented here indicate that the specimens observed in air with the atomic force microscope were still in a hydrated state.     

Atomic force microscopic study on topological structures of pBR322 DNA

Plasmid pBR322 DNA (0.5mg/mL) isolated from Escherichia coli HB101 was suspended in Tris-HCl-EDTA (1 mol/L - 0.1 mol/L, pH8.5); then a drop of the above solution was deposited on freshly cleaved mica substrate. After adsorption for about 1 min, the sample was stained with phosphotungstic acid. The residua] solution was removed with a piece of filter paper. Afterwards the sample was imaged with a home-made atomic force microscope (AFM) in air. The AFM images of pBR322 DNA with a molecular resolution have been obtained. These images show that pBR322 DNA exists in several different topological structures: (i) relaxed circular DNA with a different diameter; (ii) supercondensed DNA with different particle sizes; (iii) dimeric catenane connected by one relaxed circular molecule and another dose-compacted molecule which might be either supercoiled or intramolecular knotted form; (iv) oligomeric catenane with multiple irregular molecules in which DNA is interlocked into a complex oligomer; (v) possibly-existing     

Atomic force microscopy captures MutS tetramers initiating DNA mismatch repair

In spite of extensive research, the mechanism by which MutS initiates DNA mismatch repair (MMR) remains controversial. We use atomic force microscopy (AFM) to capture how MutS orchestrates the first step of E. coli MMR. AFM images captured two types of MutS/DNA complexes: single-site binding and loop binding. In most of the DNA loops imaged, two closely associated MutS dimers formed a tetrameric complex in which one of the MutS dimers was located at or near the mismatch. Surprisingly, in the presence of ATP, one MutS dimer remained at or near the mismatch site and the other, while maintaining contact with the first dimer, relocated on the DNA by reeling in DNA, thereby producing expanding DNA loops. Our results indicate that MutS tetramers composed of two non-equivalent MutS dimers drive E. coli MMR, and these new observations now reconcile the apparent contradictions of previous 'sliding' and 'bending/looping' models of interaction between mismatch and strand signal.     

Atomic force microscopy study of the rabbit skeletal muscle ryanodine receptors in different functional states

Atomic force microscope was applied to investigate the effect of extrinsic phospholipid on the structure of rabbit skeletal muscle ryanodine receptor/calcium release channel (RyR1). In addition, in the presence of extrinsic phospholipid, the height and elasticity of the RyR1s in different functional states were also measured. The results indicate: (i) most of the RyR1s showed a normal structure only in the presence of extrinsic phospholipid; (ii) treatment of the RyR1s with AMP and Ca²⁺ together could increase their Young’s Modulus but not change their apparent height; (iii) no detectable change in either height or Young’s Modulus of the RyR1s appeared, if the RyR1s were treated with other activators or inhibitors.     

Atomic force microscopy study of the rabbit skeletal muscle ryanodine receptors in different functional states

Atomic force microscope was applied to investigate the effect of extrinsic phospholipid on the structure of rabbit skeletal muscle ryanodine receptor/calcium release channel (RyR1). In addition, in the presence of extrinsic phospholipid, the height and elasticity of the RyR1s in different functional states were also measured. The results indicate: (i) most of the RyR1s showed a normal structure only in the presence of extrinsic phospholipid; (ii) treatment of the RyR1s with AMP and Ca2+ together could increase their Young's Modulus but not change their apparent height; (iii) no detectable change in either height or Young's Modulus of the RyR1s appeared, if the RyR1s were treated with other activators or inhibitors.     

原子力显微镜拉伸吸附在金膜表面的短单链DNA分子

对单根DNA分子的操纵和拉伸可以直接研究DNA的弹性等力学性质. 首先通过将金沉积到云母表面制备了表面粗糙度小于0.3 nm的金膜,然后一段硫代的单链DNA (100 bases) 吸附到金膜表面. 利用原子力显微镜观察不同浓度的DNA吸附在金膜上的表面形貌. 进一步用原子力显微镜的力曲线模式拉伸DNA分子,在50％的情况下DNA可以被针尖拉伸,观察到了由于针尖和DNA分子间作用力的不同导致的多种不同力曲线.     

原子力显微镜单分子力谱研究生物分子间相互作用

原子力显微镜单分子力谱是近年来发展起来的能在单分子水平研究生物分子相互作用的新工具。本文综述了单分子力谱的测定原理、方法及其在研究蛋白．蛋白、蛋白-DNA相互作用,蛋白质去折叠和活细胞上配体／受体结合中的应用进展。     

The clamp-loader-helicase interaction in Bacillus. Atomic force microscopy reveals the structural organisation of the DnaB-tau complex in Bacillus

The clamp-loader-helicase interaction is an important feature of the replisome. Although significant biochemical and structural work has been carried out on the clamp-loader-clamp-DNA polymerase alpha interactions in Escherichia coli, the clamp-loader-helicase interaction is poorly understood by comparison. The tau subunit of the clamp-loader mediates the interaction with DnaB. We have recently characterised this interaction in the Bacillus system and established a tau(5)-DnaB(6) stoichiometry. Here, we have obtained atomic force microscopy images of the tau-DnaB complex that reveal the first structural insight into its architecture. We show that despite the reported absence of the shorter gamma version in Bacillus, tau has a domain organisation similar to its E.coli counterpart and possesses an equivalent C-terminal domain that interacts with DnaB. The interaction interface of DnaB is also localised in its C-terminal domain. The combined data contribute towards our understanding of the bacterial replisome.     

Atomic force microscopy captures the initiation of methyl-directed DNA mismatch repair

In Escherichia coli, errors in newly-replicated DNA, such as the incorporation of a nucleotide with a mis-paired base or an accidental insertion or deletion of nucleotides, are corrected by a methyl-directed mismatch repair (MMR) pathway. While the enzymology of MMR has long been established, many fundamental aspects of its mechanisms remain elusive, such as the structures, compositions, and orientations of complexes of MutS, MutL, and MutH as they initiate repair. Using atomic force microscopy, we—for the first time—record the structures and locations of individual complexes of MutS, MutL and MutH bound to DNA molecules during the initial stages of mismatch repair. This technique reveals a number of striking and unexpected structures, such as the growth and disassembly of large multimeric complexes at mismatched sites, complexes of MutS and MutL anchoring latent MutH onto hemi-methylated d(GATC) sites or bound themselves at nicks in the DNA, and complexes directly bridging mismatched and hemi-methylated d(GATC) sites by looping the DNA. The observations from these single-molecule studies provide new opportunities to resolve some of the long-standing controversies in the field and underscore the dynamic heterogeneity and versatility of MutSLH complexes in the repair process.     

Atomic force microscopy comes of age

AFM (atomic force microscopy) analysis, both of fixed cells, and live cells in physiological environments, is set to offer a step change in the research of cellular function. With the ability to map cell topography and morphology, provide structural details of surface proteins and their expression patterns and to detect pico‐Newton force interactions, AFM represents an exciting addition to the arsenal of the cell biologist. With the explosion of new applications, and the advent of combined instrumentation such as AFM—confocal systems, the biological application of AFM has come of age. The use of AFM in the area of biomedical research has been proposed for some time, and is one where a significant impact could be made. Fixed cell analysis provides qualitative and quantitative subcellular and surface data capable of revealing new biomarkers in medical pathologies. Image height and contrast, surface roughness, fractal, volume and force analysis provide a platform for the multiparameter analysis of cell and protein functions. Here, we review the current status of AFM in the field and discuss the important contribution AFM is poised to make in the understanding of biological systems.     

Atomic force microscopy of the cell nucleus

In mammals and plants, the cell nucleus is organized in dynamic macromolecular domains involved in DNA and RNA metabolism. These domains can be visualized by light and electron microscopy and their composition analyzed by using several cytochemical approaches. They are composed of chromatin or ribonucleoprotein structures as interchromatin and perichromatin fibers and granules, coiled bodies, and nuclear bodies. In plants, DNA arrangement defines chromocentric and reticulated nuclei. We used atomic force microscopy to study the in situ structure of the plant cell nucleus. Samples of the plants Lacandonia schismatica and Ginkgo biloba were prepared as for electron microscopy and unstained semithin sections were mounted on glass slides. For comparison, we also examined entire normal rat kidney cells using the same approach. Samples were scanned with an atomic force microscope working in contact mode. Recognizable images of the nuclear envelope, pores, chromatin, and nucleolus were observed. Reticulated chromatin was observed in L. schismatica. Different textures in the nucleolus of G. biloba were also observed, suggesting the presence of nucleolar subcompartments. The observation of nuclear structure in situ with the atomic force microscope offers a new approach for the analysis of this organelle at high resolution.     

Atomic force microscopy study of the antigen‐antibody binding force on patient cancer cells based on ROR1 fluorescence recognition

Knowledge of drug–target interaction is critical to our understanding of drug action and can help design better drugs. Due to the lack of adequate single‐molecule techniques, the information of individual interactions between ligand‐receptors is scarce until the advent of atomic force microscopy (AFM) that can be used to directly measure the individual ligand‐receptor forces under near‐physiological conditions by linking ligands onto the surface of the AFM tip and then obtaining force curves on cells. Most of the current AFM single‐molecule force spectroscopy experiments were performed on cells grown in vitro (cell lines) that are quite different from the human cells in vivo. From the view of clinical practice, investigating the drug–target interactions directly on the patient cancer cells will bring more valuable knowledge that may potentially serve as an important parameter in personalized treatment. Here, we demonstrate the capability of AFM to measure the binding force between target (CD20) and drug (rituximab, an anti‐CD20 monoclonal antibody targeted drug) directly on lymphoma patient cancer cells under the assistance of ROR1 fluorescence recognition. ROR1 is a receptor expressed on some B‐cell lymphomas but not on normal cells. First, B‐cell lymphoma Raji cells (a cell line) were used for ROR1 fluorescence labeling and subsequent measurement of CD20‐rituximab binding force. The results showed that Raji cells expressed ROR1, and the labeling of ROR1 did not influence the measurement of CD20‐rituximab binding force. Then the established experimental procedures were performed on the pathological samples prepared from the bone marrow of a follicular lymphoma patient. Cancer cells were recognized by ROR1 fluorescence. Under the guidance of fluorescence, with the use of a rituximab‐conjugated tip, the cellular topography was visualized by using AFM imaging and the CD20‐Rituximab binding force was measured by single‐molecule force spectroscopy. Copyright © 2013 John Wiley & Sons, Ltd.     

Revealing the mode of action of DNA topoisomerase I and its inhibitors by atomic force microscopy

In this study, we used, for the first time, atomic force microscope (AFM) images to investigate the mode of action of DNA topoisomerase I (topo I) in the presence and absence of its inhibitors: camptothecin (CPT) and tyrphostin AG-1387. The results revealed that in the absence of the inhibitors, the enzyme relaxed supercoiled DNA starting from a certain point in the DNA molecules and proceeded in one direction towards one of the edges of the DNA molecule. In addition, the relaxation of the supercoiled DNA is subsequently followed by a knotting event. In the presence of CPT, enzyme-supercoiled DNA complexes in which the enzyme is locked inside a relaxed region of the supercoiled DNA molecule were observed. Tyrphostin AG-1387 altered the DNA relaxation process of topo I producing unique shapes of DNA molecules. AFM images of the topo I protein provided a picture of the enzyme, which resembles its known crystallographic structure. Thus, AFM images provide new information on the mode of action of topo I in the absence and presence of its inhibitors.     

Atomic force microscope investigation of large-circle DNA molecules

A circular bacterial artificial chromosome of 148.9kbp on human chromosome 3 has been extended and fixed on bare mica substrates using a developed fluid capillary flow method in evaporating liquid drops. Extended circular DNA molecules were imaged with an atomic force microscope (AFM) under ambient conditions. The measured total lengths of the whole DNA molecules were in agreement with sequencing analysis data with an error range of +/-3.6%. This work is important groundwork for probing single nucleotide polymorphisms in the human genome, mapping genomic DNA, manipulating biomolecular nanotechnology, and studying the interaction of DNA-protein complexes investigated by AFM.     

Atomic force microscopy and modeling of natural elastic fibrillin polymers

A central issue in the understanding of Marfan syndrome deals with the functional architecture of fibrillin-containing microfibrils. Fibrillin-rich microfibrils are long extracellular matrix fibrillar components exhibiting a 50 nm periodic beaded-structure with a width of around 20–25 nm after rotary shadowing and a 10–12 nm diameter when observed in ultra-thin sections. They are composed of fibrillin monomers more or less associated with many other components which are, for the most part, poorly characterized up to date. They are known to be elastic but few data have been accumulated to understand their properties. Atomic force microscopy (AFM) allowed us to morphologically differentiate fibrillin-rich microfibrils from other fibrillar components and to investigate the thin structure of these beaded filaments in their native state. They showed, in AFM, a periodic beaded structure ranging from 50 to 60 nm and a width of about 40 nm. The different sizes of fibrillin-containing microfibrils previously observed after rotary shadowing and in ultra-thin sections was resolved with our technique and is revealed to be 10 nm in diameter. Each beaded microfibril appears to be composed of heterogeneous beads connected by 2–3 arms. An orientation of the microfibrils has been shown, and allows us to propose a complementary model of microfibrillar monomer association.     

Ultra-high resolution imaging of DNA and nucleosomes using non-contact atomic force microscopy

Visualisation of nano-scale biomolecules aids understanding and development in molecular biology and nanotechnology. Detailed structure of nucleosomes adsorbed to mica has been captured in the absence of chemical-anchoring techniques, demonstrating the usefulness of non-contact atomic force microscopy (NC-AFM) for ultra-high resolution biomolecular imaging. NC-AFM offers significant advantages in terms of resolution, speed and ease of sample preparation when compared to techniques such as cryo-electron microscopy and X-ray crystallography. In the absence of chemical modification, detailed structure of DNA deposited on a gold substrate was observed for the first time using NC-AFM, opening up possibilities for investigating the electrical properties of unmodified DNA.     

A combined atomic force microscopy imaging and docking study to investigate the complex between p53 DNA binding domain and Azurin

The tumor suppressor p53 interacts with the redox copper protein Azurin (AZ) forming a complex which is of some relevance in biomedicine and cancer therapy. To obtain information on the spatial organization of this complex when it is immobilized on a substrate, we have used tapping mode‐atomic force microscopy (TM‐AFM) imaging combined with computational docking. The vertical dimension and the bearing volume of the DNA binding domain (DBD) of p53, anchored to functionalized gold substrate through exposed lysine residues, alone and after deposing AZ, have been measured by TM‐AFM. By a computational docking approach, a three‐dimensional model for the DBD of p53, before and after addition of AZ, have been predicted. Then we have calculated the possible arrangements of these biomolecular systems on gold substrate by finding a good agreement with the related experimental distribution of the height. The potentiality of the approach combining TM‐AFM imaging and computational docking for the study of biomolecular complexes immobilized on substrates is briefly discussed. Copyright © 2009 John Wiley & Sons, Ltd.