Synthesis and photoluminescence characteristics of (Y,Gd)BO3:RE (RE = Eu3+, Ce3+, Dy3+ and Tb3+) phosphors for blue chip and near‐UV white LEDs

A series of Eu³⁺‐, Ce³⁺‐, Dy³⁺‐ and Tb³⁺‐doped (Y,Gd)BO₃ phosphors was synthesized by a solid‐state diffusion method. X‐Ray diffraction confirmed their hexagonal structure and the scanning electron microscopy results showed crystalline particles. The excitation spectra revealed that (Y,Gd)BO₃ phosphors doped with Eu³⁺, Ce³⁺ , Dy³⁺ and Tb³⁺ are effectively excited with near UV‐light of 395 nm/blue light, 364, 351 and 314 nm, respectively. Photoluminescence spectra of Eu³⁺‐, Ce³⁺‐ and Tb³⁺/Dy³⁺‐doped phosphor showed intense emission of reddish orange, blue and white light, respectively. The phosphor Y_0.60Gd_0.38BO₃:Ce_0.02 showed CIE 1931 color coordinates of (0.158, 0.031) and better color purity compared with commercially available blue BAM:Eu²⁺ phosphor. The phosphor (Y,Gd)BO₃ doped with Eu³⁺, Dy³⁺ and Tb³⁺ showed CIE 1931 color coordinates of (0.667, 0.332), (0.251, 0.299) and (0.333, 0.391) respectively. Significant photoluminescence characteristics of the prepared phosphors indicate that they might serve as potential candidates for blue chip and near‐UV white light‐emitting diode applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence and energy‐transfer properties of color‐tunable Ca2Mg0.25Al1.5Si1.25O7:Ce3+/Eu2+/Tb3+ phosphors for ultraviolet light‐emitting diodes

A series of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺/Eu²⁺/Tb³⁺ phosphors was been prepared via a conventional high temperature solid‐state reaction and their luminescence properties were studied. The emission spectra of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺ and Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Tb³⁺ phosphors show not only a band due to Ce³⁺ ions (409 nm) but also as a band due to Eu²⁺ (520 nm) and Tb³⁺ (542 nm) ions. More importantly, the effective energy transfer from Ce³⁺ to Eu²⁺ and Tb³⁺ ions was confirmed and investigated by emission/excitation spectra and luminescent decay behaviors. Furthermore, the energy level scheme and energy transfer mechanism were investigated and were demonstrated to be of resonant type via dipole–dipole (Ce³⁺ to Eu²⁺) and dipole–quadrupole (Ce³⁺ to Tb³⁺) reactions, respectively. Under excitation at 350 nm, the emitting color could be changed from blue to green by adjusting the relative doping concentration of Ce³⁺ and Eu²⁺ ions as well as Ce³⁺ and Tb³⁺ ions. The above results indicate that Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺/Tb³⁺ are promising single‐phase blue‐to‐green phosphors for application in phosphor conversion white‐light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Persistent luminescence of CaMgSi2O6:Eu2+,Dy3+ and CaMgSi2O6:Eu2+,Ce3+ phosphors prepared using the solid‐state reaction method

CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were synthesized using the solid‐state reaction method. X‐Ray diffraction (XRD) and photoluminescence (PL) analyses were used to characterize the phosphors. The XRD results revealed that the synthesized CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were crystalline and are assigned to the monoclinic structure with a space group C2/c. The calculated crystal sizes of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors with a main (221) diffraction peak were 44.87 and 53.51 nm, respectively. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed the proper preparation of the sample. The PL emission spectra of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors have a broad band peak at 444.5 and 466 nm, respectively, which is due to electronic transition from 4f⁶5d¹ to 4f⁷. The afterglow results indicate that the CaMgSi₂O₆:Eu²⁺,Dy³⁺ phosphor has better persistence luminescence than the CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

The luminescence properties of Sr2–1.5x−1.5yP2O7:xDy3+,yCe3+ phosphor for near‐UV‐based white LEDs synthesized by a chemical co‐precipitation method

A series of Sr₂P₂O₇:Dy³⁺, Sr₂P₂O₇:Ce³⁺ and Sr₂P₂O₇:Dy³⁺,Ce³⁺ phosphors was synthesized via the one‐step calcination process for the precursors prepared by co‐precipitation methods. The phases, morphology, quantum efficiency and photoluminescence properties of the obtained phosphors were characterized systematically. These results show that the near‐spherical particles prepared through calcining the precursors by means of ammonium dibasic phosphate co‐precipitation (method 3) have the smallest particle size and strongest emission intensity among the three methods in the paper. With Dy³⁺ concentration increasing in Sr₂P₂O₇:Dy³⁺ phosphors, the luminescence intensity first increases, reaches maximum, and then decreases. A similar trend was followed by Sr₂P₂O₇:Ce³⁺ with Ce³⁺concentration increasing. A successful attempt was made to initiate the energy transfer mechanism from Ce³⁺ to Dy³⁺ in the host lattice and an overlap between the emission band of Ce³⁺ and the excitation band of Dy³⁺ indicated that the Ce³⁺ → Dy³⁺ energy transfer may indeed exist. It is clear that the photoluminescence intensity of Dy³⁺ as well as the quantum efficiency of the phosphor can be enhanced markedly by co‐doping Ce³⁺. Sr₂P₂O₇:Dy³⁺,Ce³⁺ has its (CIE) chromaticity coordinates in the bluish‐white‐light region, near the standard illuminant D₆₅. The CIE 1913 chromaticity coordinates of Sr₂P₂O₇:Dy³⁺ phosphors fall in the white‐light region, and are adjacent to the ideal white‐light coordinates. In addition, the colour temperature and colour tone of Sr₂P₂O₇:Dy³⁺ could be adjusted by changing the relative concentration of Dy³⁺. In short, Sr₂P₂O₇:Dy³⁺ can be a promising single‐phased white‐light emitting phosphor for near‐UV (NUV) w‐LEDs.     

Design,synthesis and luminescence properties of Ba2YB2O6Cl‐ and Ba2YB2O6F‐based phosphors

Using a high‐temperature solid‐state reaction, the chlorine in Ba₂YB₂O₆Cl is gradually replaced by F, and a new compound with the nominal chemical formula Ba₂YB₂O₆F and two phosphors doped with Ce³⁺ and Eu³⁺, respectively, are obtained. X‐Ray diffraction and photoluminescence spectroscopy are used to characterize the as‐synthesized samples. The as‐synthesized Ba₂YB₂O₆Cl exhibits bright blue emission in the spectral range ~ 330–410 nm with a maximum around 363 nm under X‐ray or UV excitation. Ba₂YB₂O₆F:0.01Ce³⁺ exhibits blue emission in the range ~ 340–570 nm with a maximum around 383 nm. Ba₂YB₂O₆F:0.01Eu³⁺ exhibits a predominantly ⁵D₀–⁷ F₂ emission (~610 nm) and the relative intensities of the ⁵D₀–⁷ F_0,1,2 emissions are tunable under different wavelength UV excitation. The luminescence behaviors of the two phosphors are explained simply in terms of the host composition and site occupancy probability of Ce³⁺ and Eu³⁺, respectively. The results indicate that these phosphors have potential application as a blue phosphor or as a red phosphor. Copyright © 2014 John Wiley & Sons, Ltd.     

Studies on the luminescence properties of cerium co‐doping on Ca2MgSi2O7:Eu2+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were prepared using the solid‐state reaction method. The crystal structures of the sintered phosphors were of melilite type, which has a tetragonal crystallography. The chemical compositions of the sintered phosphors was confirmed by energy dispersive X‐ray spectroscopy. The different thermoluminescence kinetic parameters [activation energy (E), frequency factor (s) and order of the kinetics (b)] of these phosphors were evaluated and compared using the peak shape method. Under ultraviolet excitation, the emission spectra of both Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were composed of a broad emission band peaking at 530 nm. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co‐doped with Ce³⁺ ions, photoluminescence, afterglow and mechanoluminescence intensity was strongly enhanced. Ca₂MgSi₂O₇:Eu²⁺ showed some afterglow with a short persist time. On incorporation of Ce³⁺, efficient energy transfer from Ce³⁺ to Eu²⁺ was found and the emission intensity of Eu²⁺ was enhanced. The mechanoluminescence intensities of Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors increased proportionally increased with the increase in impact velocity, which suggests that these phosphors can be used as sensors to detect stress in an object.     

Combustion synthesis of blue‐emitting submicron CaAl4O7:Eu2+, Dy3+ persistence phosphor

Long persistence phosphor CaAl₄O₇: Eu²⁺, Dy³⁺ were prepared by a combustion method. The phosphors were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), decay time measurement techniques and photoluminescence spectra (PL). The CaAl₄O₇: Eu²⁺, Dy³⁺ phosphor showed a broad blue emission, peaking at 445 nm when excited at 341 nm. Such a blue emission can be attributed to the intrinsic 4f → 5d transitions of Eu²⁺ in the host lattices. The lifetime decay curve of the Dy³⁺ co‐doped CaAl₄O₇: Eu²⁺ phosphor contains a fast decay component and another slow decay one. Surface morphology also has been studied by SEM. The calculated CIE colour chromaticity coordinates was (0.227, 043). We have also discussed a possible long‐persistent mechanism of CaAl₄O₇:Eu²⁺, Dy³⁺ phosphor. All the results indicate that this phosphor has promising potential for practical applications in the field of long‐lasting phosphors for the purposes of sign boards and defence. Copyright © 2011 John Wiley & Sons, Ltd.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of the long‐persistence phosphor CaAl2O4:Eu2+, Dy3+, Nd3+ by combustion method and its luminescent properties

Calcium aluminate phosphor co‐doped Eu²⁺, Dy³⁺, Nd³⁺ is prepared by the combustion method. We study systemically the influences of the quantity of mixed Dy³⁺ ion, the quantity of flux H₃BO₃, the differences in dispersing methods between magnetic stirring and ultrasonic dispersing and the combustion temperature on the long‐persistence phosphor. The analytical results indicate that Dy³⁺ ion improves the properties of the phosphors CaAl₂O₄:Eu²⁺, Nd³⁺. The appropriate quantity of flux H₃BO₃ to reduce the forming temperature of the sample was determined. The monoclinic single phase of CaAl₂O₄ formed at 500°C and remained steady. The calcium aluminate co‐doped Eu²⁺, Dy³⁺, Nd³⁺ was synthesized by dispersal of the raw material using the ultrasonic method, and it had better optical properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Sol–gel preparation and luminescent properties of red‐emitting phosphor Sr‐Ba‐Mo‐W‐O‐(Eu3+,Sm3+)

Two series of red‐emitting phosphors Sr‐Ba‐Mo‐W‐O:Eu,Sm and Sr‐Ba‐Mo‐W‐O:Eu have been synthesized by a sol–gel method. The effects of the chemical composition, concentrations of Sm³⁺ and Eu³⁺, the Sr²⁺/Ba²⁺ ratio, and the W⁶⁺/Mo⁶⁺ ratio on the luminescent properties were investigated. The as‐prepared phosphors were characterized by X‐ray diffraction and Raman spectra. Results showed that single phases of the two series were prepared. The compositions of Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 and Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10 had the strongest luminescent intensity. The excitation spectra of Sm³⁺, Eu³⁺ co‐doped phosphors were broader and the strongest peak moved to 404 nm when compared with that of Eu³⁺ single‐doped phosphors. The luminescent intensity of the Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 at 618 nm were 2.8 times greater than that of Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10. The luminescent intensity of Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 and Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10 at 150 °C decreased to 56.8% and 50.3% of the initial value at room temperature, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Synthesis and characterization of blue long‐lasting BaCa2Al8O15:Eu2+, Dy3+ phosphor

We have synthesized and characterized a new BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ phosphor prepared by the combustion method. X‐ray diffraction, thermoluminescence, scanning electron microscope, time decay and optical spectral analysis photoluminescence excitation, emission spectra were used to characterize the phosphors. Broadband ultraviolet excited luminescence of the BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ was observed in the blue region (λ_max = 435 nm) due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the Eu²⁺ ion. Scanning electron microscopy has been used for exploring the morphological properties of the prepared phosphors. The BaCa₂Al₈O₁₅:Eu²⁺ phosphor has a blue afterglow when Dy³⁺ ions were co‐doped. The thermoluminescence spectra show that the Dy³⁺ ion induces a proper trap in the phosphor with a depth of 0.67 eV and results in a long afterglow phosphorescence. Copyright © 2013 John Wiley & Sons, Ltd.     

Energy transfer induced white‐light‐emitting phosphor by co‐doping Ce3+, Tb3+ and Mn2+ into the single Ba9Lu2Si6O24 host

In the Ba₉Lu₂Si₆O₂₄ (BLS) host, Ce³⁺ shows cyan emissions peaking at 490 nm under 400 nm excitations. BLS:Tb³⁺ only can be effectively excited by 254 nm light and gives rise to green emissions at 553 nm. However, both the cyan and green emissions can be obtained in BLS:Ce³⁺,Tb³⁺ under 400 nm excitations due to effective energy transfers from Ce³⁺ to Tb³⁺. BLS:Mn²⁺ shows red emissions peaking at 610 nm under 414 nm excitations. By co‐doping Ce³⁺, Tb³⁺ and Mn²⁺, tunable full‐color emissions were obtained. The BLS:0.3Ce³⁺,0.6Tb³⁺,0.15Mn²⁺ single phosphor exhibits a white light with a high color rendering index of 85 and a correlated color temperature of 5480 K under 400 nm excitation.     

Energy transfer in M5(PO4)3 F:Eu2+,Ce3+ (M = Ca and Ba) phosphors

M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) co‐doped with Ce³⁺ phosphors were successfully prepared by the combustion synthesis method. The introduction of co‐dopant (Ce³⁺) into the host enhanced the luminescent intensity of the M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) efficiently. Previously, we have reported the synthesis and photoluminescence properties of same phosphors. The aim of this article is to report energy transfer mechanism between Ce³⁺?Eu²⁺ ions in M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) phosphors, where Ce³⁺ ions act as sensitizers and Eu²⁺ ions act as activators. The M₅(PO₄)₃ F:Eu²⁺ (M = Ca and Ba) co‐doped with Ce³⁺ phosphor exhibits great potential for use in white ultraviolet (UV) light‐emitting diode applications to serve as a single‐phased phosphor that can be pumped with near‐UV or UV light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence properties of Eu2+ doped and Eu2+,Dy3+ co‐doped Ba2MgSi2O7 phosphors

In this work, we report the preparation, characterization, comparison and luminescence mechanisms of Eu²⁺‐doped and Eu²⁺,Dy³⁺‐co‐doped Ba₂MgSi₂O₇ (BMSO) phosphors. Prepared phosphors were synthesized via a high temperature solid‐state reaction method. All prepared phosphors appeared white. The phase structure, particle size, and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscopy (TEM) and energy‐dispersive X‐ray (EDX) analysis. The luminescence properties of the phosphors were investigated by thermoluminescence (TL) and photoluminescence (PL). The PL excitation and emission spectra of Ba₂MgSi₂O₇:Eu²⁺ showed the peak to be around 381 nm and 490 nm respectively. The PL excitation spectrum of Ba₂MgSi₂O₇:Eu²⁺Dy³⁺ showed the peak to be around 341 nm and 388 nm, and the emission spectrum had a broad band around 488 nm. These emissions originated from the 4f⁶ 5d¹ to 4f⁷ transition of Eu²⁺. TL analysis revealed that the maximum TL intensity was found at 5 mol% of Eu²⁺ doping in Ba₂MgSi₂O₇ phosphors after 15 min of ultraviolet (UV) light exposure. TL intensity was increased when Dy³⁺ ions were co‐doped in Ba₂MgSi₂O₇:Eu²⁺ and maximum TL intensity was observed for 2 mol% of Dy³⁺. TL emission spectra of Ba_1.95MgSi₂O₇:0.05Eu²⁺ and Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors were found at 500 nm. TL intensity increased with UV exposure time up to 15 min, then decreased for the higher UV radiation dose for both Eu doping and Eu,Dy co‐doping. The trap depths were calculated to be 0.54 eV for Ba_1.95MgSi₂O₇:0.05Eu²⁺ and 0.54 eV and 0.75 eV for Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors. It was observed that co‐doping with small amounts of Dy³⁺ enhanced the thermoluminescence properties of Ba₂MgSi₂O₇ phosphor. Copyright © 2016 John Wiley & Sons, Ltd. [Correction added on 5 April 2016, after first online publication: The following parts of the abstract have been edited for consistency. '4f65d1' has been corrected to '4f⁶ 5d¹', '4f7' has been corrected to '4f⁷', 'Ba1.95' has been corrected to 'Ba_1.95' and 'Ba1.93' has been corrected to 'Ba_1.93' respectively.]     

Intense green‐, red‐emitting Tb3+, Tb3+/Bi3+‐doped and Sm3+, Sm3+/La3+‐doped Ca2Al2SiO7 phosphors

This paper focuses on an optical study of a Tb³⁺/Bi³⁺‐doped and Sm³⁺/La³⁺‐ doped Ca₂Al₂SiO₇ phosphor synthesized using combustion methods. Here, Ca₂Al₂SiO₇:Sm³⁺ showed a red emission band under visible light excitation but, when it co‐doped with La³⁺ ions, the emission intensity was further enhanced. Ca₂Al₂SiO₇:Tb³⁺ shows the characteristic green emission band under near‐ultraviolet light excitation wavelengths, co‐doping with Bi³⁺ ions produced enhanced photoluminescence intensity with better colour tunable properties. The phosphor exhibited better phase purity and crystallinity, confirmed by X‐ray diffraction. Binding energies of Ca(2p), Al(2p), Si(2p), O(1s) were studied using X‐ray photoelectron spectroscopy. The reported phosphor may be a promising visible light excited red phosphor for light‐emitting diodes and energy conversion devices.     

Enhancement of the photoluminescence and long afterglow properties of Sr2MgSi2O7:Eu2+ phosphor by Dy3+ co‐doping

Sr₂MgSi₂O₇:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX), and photo‐, thermo‐ and mechanoluminescence spectroscopic techniques. The phase structure of the sintered phosphor was an akermanite type structure, which belongs to tetragonal crystallography. The thermoluminescence properties of these phosphors were investigated and compared. Under ultraviolet light excitation, the emission spectra of both prepared phosphors were composed of a broad emission band peaking at 470 nm. When the Sr₂MgSi₂O₇:Eu²⁺ phosphor was co‐doped with Dy³⁺, the photoluminescence (PL), afterglow and mechanoluminescence (ML) intensity were strongly enhanced. The decay graph indicated that both the sintered phosphors contained fast decay and slow decay processes. The ML intensities of Sr₂MgSi₂O₇:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphors were increased proportionally with increasing impact velocity, a finding that suggests that these phosphors could be used as sensors to detect the stress of an object. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation on luminescence properties of Eu2+‐doped Ba3Al2O5Cl2 phosphor for near‐UV‐excited white LEDs

Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor was prepared by combustion synthesis (CS). The prepared phosphor was excited at 329 nm; the phosphors shows an efficient bluish‐green wide‐band emission centred at 490 nm, which originates from the 4f⁶d¹ → 4f⁷ transition of Eu²⁺ ions. The excitation spectra of the phosphors have a band centred at 329 nm. It was also characterized by XRD, FT–IR for confirmation of phase purity, and FT–IR analysis indicated the vibrations of metal–oxygen (M–O) groups. SEM shows the morphology of the phosphor at the submicron scale. The results indicate that Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor may be applicable for solid‐state lighting purposes. Copyright © 2012 John Wiley & Sons, Ltd.     

Tunable luminescence and energy transfer in Ca3SiO4Cl2:Ce3+,Li+,Mn2+,Eu2+ phosphors

A series of color‐tunable Ca_{3–2x‐y‐z}SiO₄Cl₂ (CSC):xCe³⁺,xLi⁺,yMn²⁺,zEu²⁺ phosphors with low temperature phase structure was synthesized via the sol–gel method. An energy transfer process from Ce³⁺ to Mn²⁺ in CSC:0.01Ce³⁺,0.01Li⁺,yMn²⁺ (y = 0.03–0.09) and the mechanism was verified to be an electric dipole–dipole interaction. The Ce³⁺ and Mn²⁺ emission intensities were greatly enhanced by co‐doping Eu²⁺ ions into CSC:0.01Ce³⁺,0.01Li⁺,0.07Mn²⁺ phosphors due to competitive energy transfers from Eu²⁺/Ce³⁺ to Mn²⁺, and Ce³⁺ to Eu²⁺. Under 332 nm excitation, CSC:0.01Ce³⁺,0.01Li+,0.07Mn²⁺,zEu²⁺ (z = 0.0005–0.002) exhibited tunable emission colors from green to white with coexisting orange, green and violet‐blue emissions. These phosphors could have potential application in white light‐emitting diodes.     

Dy3+‐, Sm3+‐, Ce3+‐ and Tb3+‐activated optical properties of microcrystalline BaMgP2O7 phosphors

Photoluminescence (PL) and thermoluminescence (TL) properties of rare earth (RE) ion (RE = Dy³⁺, Sm³⁺, Ce³⁺, Tb³⁺) activated microcrystalline BaMgP₂O₇ phosphors are presented in this work. Non‐doped and doped samples of BaMgP₂O₇ were prepared using a solid state diffusion method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), PL and TL. The XRD measurement confirmed the phase purity of the BaMgP₂O₇ host matrix. The average particle size was found through SEM measurement to be around 2 μm. All activators using the PL technique displayed characteristic excitation and emission spectra that corresponded to their typical f → f and f → d transitions respectively. Thermoluminescence measurements showed that BaMgP₂O₇:RE (RE = Dy³⁺, Sm³⁺, Tb³⁺, Ce³⁺) and co‐doped BaMgP₂O₇:Ce³⁺,Tb³⁺ phosphors have also TL behaviour.