Preparation and application of solvent‐modulated self‐doped N–S multicolour fluorescence carbon quantum dots

In this paper, two types of carbon quantum dot (CQDs) were prepared using biocompatible l ‐methionine as the carbon source and urea as the nitrogen source and a one‐step hydrothermal treatment. By changing the reaction solvents (deionized (DI) water and dimethylformamide (DMF)), the maximum emission of the resulting CQDs shifted from blue to red light. Specifically, the emission wavelength of the CQDs moved from 433 nm to 625 nm following embedding of a new functional group (–CONH–) on the surface of the CQDs. Photoluminescence quantum yields of the CQDs with blue and red emission reached 64% and 61%, respectively. The R‐CQDs were used to detect metal ions and a linear relationship was demonstrated between ln(F/F₀) and Fe³⁺ concentration in the range 0–0.5 mmol/L with a detection limit of 0.067 μM. Therefore these R‐CQDs have great potential as fluorescent probes for Fe³⁺ detection. We expect that the excellent water‐soluble, biocompatible and optical properties of the CQDs developed in this work mean that they will be widely used to detect biological cells.     

A new Schiff base as a turn‐off fluorescent sensor for Cu2+ and its photophysical properties

A new Schiff base receptor 1 was synthesized and its photophysical properties were investigated by absorption, emission and excitation techniques. Furthermore, its chromogenic and fluorogenic sensing abilities towards various metal ions were examined. Receptor 1 selectively detects Cu²⁺ ion through fluorescence quenching and detection was not inhibited in the presence of other metal ions. From fluorescence titration, the limit of detection of receptor 1 as a fluorescent ‘turn‐off’ sensor for the analysis of Cu²⁺ was estimated to be 0.35 μM.     

Hg2+‐selective ratiometric and colorimetric probe based on dansyl–rhodamine and its staining function in cell imaging

A new ratiometric probe composed of a dansyl–rhodamine dyad for the detection of Hg²⁺ via fluorescence resonance energy transfer was designed and synthesized. Rhodamine, dansyl chloride, and hydrazide were selected as the acceptor, donor, and reaction site, respectively. It displayed high selectivity and sensitivity to Hg²⁺ with obvious colour change and fluorescence change due to Hg²⁺‐assisted hydrolysis of rhodamine hydrazide. A good linear relationship ranging from 0 to 16 μM and 0–28 μM for the Hg²⁺ concentration was found based on absorbance and fluorescence assay, respectively. Detection limits of absorbance and fluorescence for Hg²⁺ were calculated to be 1.22 μM and 9.10 μM, respectively.     

Multifunctional peptide‐based fluorescent chemosensor for detection of Hg2+, Cu2+ and S2− ions

A novel multifunctional fluorescent peptide sensor based on pentapeptide dansyl‐Gly‐His‐Gly‐Gly‐Trp‐COOH (D‐P5) was designed and synthesized efficiently using Fmoc solid‐phase peptide synthesis (SPPS). This fluorescent peptide sensor shows selective and sensitive responses to Hg²⁺ and Cu²⁺ among 17 metal ions and six anions studied in N‐2‐hydroxyethylpiperazine‐N‐2‐ethane sulfonic acid (HEPES) buffer solution. The peptide probe differentiates Hg²⁺ and Cu²⁺ ions by a ‘turn‐on’ response to Hg²⁺ and a ‘turn‐off’ response to Cu²⁺. Upon addition of Hg²⁺ or Cu²⁺ ions, the sensor displayed an apparent color change that was visible under an ultraviolet lamp to the naked eye. The limits of detection (LOD) of DP‐5 were 25.0 nM for Hg²⁺ and 85.0 nM for Cu²⁺; the detection limits for Cu²⁺ were much lower than the drinking water maximum contaminant levels set out by the United States Environmental Protection Agency (USEPA). It is noteworthy that both D‐P5‐Hg and D‐P5‐Cu systems were also used to detect S^2? successfully based on the formation of ternary complexes. The LODs of D‐P5‐Hg and D‐P5‐Cu systems for S^2? were 217.0 nM and 380.0 nM, respectively. Furthermore, the binding stoichiometry, binding affinity and pH sensitivity of the probe for Hg²⁺ and Cu²⁺ were investigated. This study gives new possibilities for using a short fluorescent peptide sensor for multifunctional detection, especially for anions.     

Polymer composite fluorescent hydrogel film based on nitrogen‐doped carbon dots and their application in the detection of Hg2+ ions

A simple microwave‐assisted solvothermal method was used to prepare fluorescent nitrogen‐doped carbon dots (N‐CDs) with high fluorescence quantum yield (79.63%) using citric acid and N‐(2‐hydroxyethyl)ethylenediamine as starting materials. The PVAm‐g‐N‐CDs grafted products were synthesized by amide bond formation between the carboxylic groups of N‐CDs and amine groups of polyvinylamine (PVAm). Fluorescent hydrogel films (PVAm‐g‐N‐CDs/PAM) were synthesized by interpenetration polymer network polymerization of PVAm‐g‐N‐CDs and acrylamide (AM). When used for ion detection, we found that the fluorescence of the hydrogel films was clearly quenched by addition of Hg²⁺. Repeatability tests on using the hydrogel films for Hg²⁺ detection showed that they could be applied at least three times. The PVAm‐g‐N‐CDs/PAM could serve as an effective fluorescent sensing platform for sensitive detection of Hg²⁺ ions with a detection limit of 0.089 μmol/L. This work may offer a new approach for developing recoverable and sensitive N‐CDs‐based sensors for biological and environmental applications.     

Ratiometric fluorescent detection of Cu2+ based on dual‐emission ZIF‐8@rhodamine‐B nanocomposites

Zeolitic imidazolate framework‐8 (ZIF‐8) loading rhodamine‐B (ZIF‐8@rhodamine‐B) nanocomposites was proposed and used as ratiometric fluorescent sensor to detect copper(II) ion (Cu²⁺). Scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray powder diffraction, nitrogen adsorption/desorption isotherms and fluorescence emission spectroscopy were employed to characterize the ZIF‐8@rhodamine‐B nanocomposites. The results showed the rhodamine‐B was successfully assembled on ZIF‐8 based on the π‐π interaction and the hydrogen bond between the nitrogen atom of ZIF‐8 and –COOH of rhodamine‐B. The as‐obtained ZIF‐8@rhodamine‐B nanocomposites were octahedron with size about 150–200 nm, had good water dispersion, and exhibited the characteristic fluorescence emission of ZIF‐8 at 335 nm and rhodamine‐B at 575 nm. The Cu²⁺ could quench fluorescence of ZIF‐8 rather than rhodamine‐B. The ZIF‐8 not only acted as the template to assemble rhodamine‐B, but also was employed as the signal fluorescence together with the fluorescence of rhodamine‐B as the reference to construct a novel ratiometric fluorescent sensor to detect Cu²⁺. The resulted ZIF‐8@rhodamine‐B nanocomposite fluorescence probe showed good linear range (68.4 nM to 125 μM) with a low detection limit (22.8 nM) for Cu²⁺ combined with good sensitivity and selectivity. The work also provides a better way to design ratiometric fluorescent sensors from ZIF‐8 and other fluorescent molecules.     

The synthesis and modification of highly fluorescent carbon quantum dots for reversible detection of water‐soluble phosphonate‐1‐hydroxyethane‐1,1‐diphosphonic acid by fluorescence spectroscopy

Photoluminescent (PL) carbon quantum dots (CQDs) were prepared successfully using a facile and green procedure. They exhibited striking blue fluorescence and excellent optical properties, with a quantum yield as high as 61.44%. Due to the fluorescence quenching effect and the stronger complexing ability of the phosphoric acid group of 1‐hydroxyethane‐1,1‐diphosphonic acid (HEDP) to Fe³⁺ , CQDs doped with Fe³⁺ were adequately constructed as an efficient and sensitive fluorescent probe for HEDP‐specific sensing. The proposed fluorescent probe had a sensitive and rapid response in the range 5–70 μ M. Furthermore, quantitative molecular surface (QMS) analysis based on the Multiwfn program was applied to explore the complexation mode of HEDP and metal ions. The distribution of electrostatic potential (ESP), average local ionization energy (ALIE), the minimum value points and the position of the lone pair electrons on the surface of molecular van der Waals were further determined. More strikingly, this experiment achieved the quantitative detection of water‐soluble phosphonate‐HEDP, for the first time using fluorescence spectrometry. It has been proved to be an effective and intuitive sensing method for the detection of HEDP in real samples.     

‘Turn‐on’ fluorescent chemosensors based on naphthaldehyde‐2‐pyridinehydrazone compounds for the detection of zinc ion in water at neutral pH

A series of naphthaldehyde‐2‐pyridinehydrazone derivatives were discovered to display interesting ‘turn‐on’ fluorescence response to Zn²⁺ in 99% water/DMSO (v/v) at pH 7.0. Mechanism study indicated that different substituent groups in the naphthaldehyde moiety exhibited significant influence on the detection of Zn²⁺. The electron rich group resulted in longer fluorescence wavelengths but smaller fluorescence enhancement for Zn²⁺. Among these compounds, 1 showed the highest fluorescence enhancement of 19‐fold with the lowest detection limit of 0.17 μmol/L toward Zn²⁺. The corresponding linear range was at least from 0.6 to 6.0 μmol/L. Significantly, 1 showed an excellent selectivity toward Zn²⁺ over other metal ions including Cd²⁺.     

A carbonothioate‐based highly selective fluorescent probe with a large Stokes shift for detection of Hg2+

Mercury (Hg) is one of the heavy metal pollutants in the environment. Even a very small amount of mercury can cause serious harm to human beings. Herein, we reported a new carbonothioate‐based fluorescent probe for the detection of Hg²⁺ without interference from other metal ions. This probe possessed a very large Stokes shift (192 nm), which could improve the detection sensitivity by minimizing the interferences resulted from self‐absorption or auto‐fluorescence. With the addition of Hg²⁺ to the probe solution, considerable fluorescence enhancement was observed. Additionally, the Hg²⁺ concentration of 0–16 μM and fluorescence intensity showed a good linear relationship (y = 22106× + 53108, R² = 0.9955). Finally, the proposed probe was used to detect Hg²⁺ in real water samples, and its result was satisfactory. Therefore, our proposed probe would provide a promising method for the determination of Hg²⁺ in the environment.     

A simply synthesized biphenyl substituted piperidin‐4‐one for the fluorescence chemosensing of Cd2+

Ion‐induced change in fluorescence is a straight‐forward method for detection of toxic metal ions showing immediate response. Cadmium ions are toxic to the environment. We report in this paper a piperidine‐4‐one‐based fluorescent chemosensor of Cd²⁺ ions, designed and synthesized by a simple method. The compound is characterized using infra‐red (IR) and ¹H–NMR spectral techniques. The chemosensor showed Cd²⁺ ion selectivity and sensitivity in aqueous solution. The stoichiometry and the binding constants were determined using fluorescence spectroscopy. Piperidine‐4‐one shows a 1:1 stoichiometric binding to Cd²⁺. The limit of detection of Cd²⁺ was reported.     

BSA–AuNPs@Tb–AMP metal–organic frameworks for ratiometric fluorescence detection of DPA and Hg2+

An easy and effective strategy for synthesizing a ratiometric fluorescent nanosensor has been demonstrated in this work. Novel fluorescent BSA–AuNPs@Tb–AMP (BSA, bovine serum albumin; AMP, adenosine 5′‐monophosphate; AuNPs, Au nanoparticles) metal–organic framework (MOF) nanostructures were synthesized by encapsulating BSA–AuNPs into Tb–AMP MOFs for the detection of 2,6‐pyridinedicarboxylic acid (DPA) and Hg²⁺. DPA could strongly co‐ordinate with Tb³⁺ to replace water molecules from the Tb³⁺ center and accordingly enhanced the fluorescence of Tb–AMP MOFs. The fluorescence of BSA–AuNPs at 405 nm remained constant. While the fluorescence of BSA–AuNPs at 635 nm was quenched after Hg²⁺ was added, the fluorescence of Tb–AMP MOFs remained constant. Accordingly, a ratiometric fluorescence nanosensor was constructed for detection of DPA and Hg²⁺. The ratiometric nanosensor exhibited good selectivity to DPA over other substances. The F₅₄₅/F₄₀₅ linearly increased with increase of DPA concentration in the range of 50 nM to 10 μM with a detection limit as low as 17.4 nM. F₆₃₅/F₄₀₅ increased linearly with increase of Hg²⁺ concentration ranging from 50 nM to 1 μM with a detection limit as low as 20.9 nM. Additionally, the nanosensor could be successfully applied for the determination of DPA and Hg²⁺ in running water.     

Purification of glucose‐6‐phosphate dehydrogenase from rat (Rattus norvegicus) erythrocytes and inhibition effects of some metal ions on enzyme activity

Glucose‐6‐phosphate dehydrogenase (G6PD) is the first enzyme on which the pentose phosphate pathway was checked. In this study, purification of a G6PD enzyme was carried out by using rat erythrocytes with a specific activity of 13.7 EU/mg and a yield of 67.7 and 155.6‐fold by using 2′,5′‐ADP Sepharose‐4B affinity column chromatography. For the purpose of identifying the purity of enzyme and molecular mass of the subunit, a sodium dodecyl sulfate‐polyacrylamide gel electrophoresis was carried out. The molecular mass of subunit was calculated 56.5 kDa approximately. Then, an investigation was carried out regarding the inhibitory effects caused by various metal ions (Fe²⁺, Pb²⁺, Cd²⁺, Ag⁺, and Zn²⁺) on G6PD enzyme activities, as per Beutler method at 340 nm under in vitro conditions. Lineweaver–Burk diagrams were used for estimation of the IC₅₀ and K_i values for the metals. K_i values for Pb⁺², Cd⁺², Ag⁺, and Zn⁺² were 113.3, 215.2, 19.4, and 474.7 μM, respectively.     

Green synthesis of fluorescent carbon dots using chloroplast dispersions as precursors and application for Fe3+ ion sensing

Water‐soluble carbon dots (CDs) were synthesized using a one‐step hydrothermal treatment of chloroplast dispersions extracted from fresh leaves as a green carbon source. The CD solution showed an emission peak centred at 445 nm when excited at 300 nm. The synthesized CDs were uniform and monodispersed with an average size of 5.6 nm. When adding ferric(III) ions (Fe³⁺) to the solution of the original CDs, the fluorescence intensity decreased significantly. Based on the linear relationship between fluorescence intensity and concentration of Fe³⁺ ions, an effective method for rapid, sensitive and selective Fe³⁺ sensing in aqueous solution could be established. Under optimum conditions, the extent of the fluorescence quenching of prepared CDs strongly depended on the Fe³⁺ ions over a wide concentration range 1.0–100.0 μM with a detection limit (3σ/k) of 0.3 μM. Furthermore, the quantitative determination of Fe³⁺ ions in environmental water samples was realized.     

Light emission from the Fe2+–EDTA–ascorbic acid–H2O2 system strongly enhanced by plant phenolic acids

Oxidative reactions can result in the formation of electronically excited species that undergo radiative decay depending on electronic transition from the excited state to the ground state with subsequent ultra‐weak photon emission (UPE). We investigated the UPE from the Fe²⁺–EDTA (ethylenediaminetetraacetic acid)–AA (ascorbic acid)–H₂O₂ (hydrogen peroxide) system with a multitube luminometer (Peltier‐cooled photon counter, spectral range 380–630 nm). The UPE, of 92.6 μmol/L Fe²⁺, 185.2 μmol/L EDTA, 472 μmol/L AA, 2.6 mmol/L H₂O₂, reached 1217 ± 118 relative light units during 2 min measurement and was about two times higher (P < 0.001) than the UPE of incomplete systems (Fe²⁺–AA–H₂O₂, Fe²⁺–EDTA–H₂O₂, AA–H₂O₂) and medium alone. Substitution of Fe²⁺ with Cr²⁺, Co²⁺, Mn²⁺ or Cu²⁺ as well as of EDTA with EGTA (ethylene glycol‐bis(β‐aminoethyl ether)‐N,N,N′,N′‐tetraacetic acid) or citrate powerfully inhibited UPE. Experiments with scavengers of reactive oxygen species (dimethyl sulfoxide, mannitol, sodium azide, superoxide dismutase) revealed the dependence of UPE only on hydroxyl radicals. Dimethyl sulfoxide at the concentration of 0.74 mmol/L inhibited UPE by 79 ± 4%. Plant phenolics (ferulic, chlorogenic and caffec acids) at the concentration of 870 μmol/L strongly enhanced UPE by 5‐, 13.9‐ and 46.8‐times (P < 0.001), respectively. It is suggested that augmentation of UPE from Fe²⁺–EDTA–AA–H₂O₂ system can be applied for detection of these phytochemicals.     

Two new rhodamine‐based fluorescent chemosensors for Fe3+ in aqueous solution

Two new rhodamine‐based fluorescent probes were synthesized and characterized by NMR, high resolution mass spectrometer (HR‐MS) and IR. The probes displayed a high selectivity for Fe³⁺ among environmentally and biologically relevant metal ions in aqueous solution (CH₃OH–H₂O = 3 : 2, v/v). The significant changes in the fluorescence color could be used for naked‐eye detection. Job's plot, IR and ¹H NMR indicated the formation of 1: 1 complexes between sensor 1 and Fe³⁺. The reversibility establishes the potential of both probes as chemosensors for Fe³⁺ detection. The probe showed highly selectivity in aqueous solution and could be used over the pH range between 5 and 9. A simple paper test‐strip system for the rapid monitoring of Fe³⁺ was developed, indicating its convenient use in environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Rhodamine-based “turn-on” fluorescent probe with high selectivity for Fe imaging in living cells

A rhodamine-based “turn-on” fluorescent probe 1 was synthesized with high yield. The recognizing behavior displays high selectivity of 1 toward Fe²⁺ with a 2:1 complex, and 1 exhibits a stable response for Fe²⁺ over a concentration range from 2 μM to 24 μM. Most importantly, probe is hardly interfered by other transition metal ions. Their fluorescent enhancement is observed in the presence of Fe²⁺ because of the ring-open interactions of spirocyclic. All measurements are made in PBS buffer environments simulating biological conditions to make them suitable candidates for fluorescent labeling of biological systems. Confocal laser scanning microscopy experiments have proven that probe can be used to monitor Fe²⁺ in living cells.     

Highly selective and sensitive ‘on–off’ fluorescent chemosensor for Fe3+ ions crafted by benzofuran moiety in both experimental and theoretical methods

A benzofuran glycinamide-based chemosensor, 3-(2-([4-fluorobenzyl]amino)acetamido)benzofuran-2-carboxamide ( BGA ) was developed and synthesized for the selective and sensitive detection of Fe³⁺ ions. The photophysical properties of the probe BGA were studied using UV–visible light absorption and fluorescence spectrophotometers. The chemosensor BGA showed a marked ‘on–off’ fluorescence response towards Fe³⁺ ions in the presence of other metal ions in DMSO/H₂O solution (9/1, v/v). The very low limits of detection (LOD) were calculated to be 10 nM and 43 nM using UV–visible light absorption and fluorescence spectrophotometers, respectively. Job's plot analysis revealed the formation of a BGA -Fe³⁺ complex with a 1:1 binding stoichiometry ratio using UV–visible light spectroscopy. The sensing mechanism was also demonstrated using density functional theory calculation.     

Enzymes Involved in Pyrophosphate and Calcium Metabolism as Targets for Anti‐scuticociliate Chemotherapy

Inorganic pyrophosphate (PPi) is a key metabolite in cellular bioenergetics under chronic stress conditions in prokaryotes, protists and plants. Inorganic pyrophosphatases (PPases) are essential enzymes controlling the cellular concentration of PPi and mediating intracellular pH and Ca²⁺ homeostasis. We report the effects of the antimalarial drugs chloroquine (CQ) and artemisinin (ART) on the in vitro growth of Philasterides dicentrarchi, a scuticociliate parasite of turbot; we also evaluated the action of these drugs on soluble (sPPases) and vacuolar H+‐PPases (H+‐PPases). CQ and ART inhibited the in vitro growth of ciliates with IC50 values of respectively 74 ± 9 μM and 80 ± 8 μM. CQ inhibits the H+ translocation (with an IC50 of 13.4 ± 0.2 μM), while ART increased translocation of H+ and acidification. However, both drugs caused a decrease in gene expression of H+‐PPases. CQ significantly inhibited the enzymatic activity of sPPases, decreasing the consumption of intracellular PPi. ART inhibited intracellular accumulation of Ca²⁺ induced by ATP, indicating an effect on the Ca²⁺‐ATPase. The results suggest that CQ and ART deregulate enzymes associated with PPi and Ca²⁺ metabolism, altering the intracellular pH homeostasis vital for parasite survival and providing a target for the development of new drugs against scuticociliatosis.     

Colorimetric detection of gallic acid based on the enhanced oxidase‐like activity of floral‐like magnetic Fe3O4@MnO2

In this study, a colorimetric method was developed for rapid and sensitive determination of gallic acid (GA) by using floral‐like magnetic Fe₃O₄@MnO₂ composite material with enhanced oxidase‐like activity. Fe₃O₄@MnO₂ composite material is able to oxidize 3,3′,5,5′‐tetramethylbenzidine (TMB) to a blue product (oxTMB) with apparent color change and absorbance at 652 nm. GA can reduce the oxTMB yielding a fading blue color. Based on these results, a technique is proposed to detect GA quantitatively and qualitatively with UV–vis spectroscopy and bare eyes. A low detection limit of 0.105 μM and a detection range of 0.01 to 15 μM were obtained with UV–vis spectroscopy. This methodology possesses high potential for application in determination of GA.     

Phenothiazine–rhodamine‐based colorimetric and fluorogenic ‘turn‐on' sensor for Zn2+ and bioimaging studies in live cells

A phenothiazine–rhodamine (PTRH) fluorescent dyad was synthesized and its ability to selectively sense Zn²⁺ ions in solution and in in vitro cell lines was tested using various techniques. When compared with other competing metal ions, the PTRH probe showed the high selectivity for Zn²⁺ ions that was supported by electronic and emission spectral analyses. The emission band at 528 nm for the PTRH probe indicated the ring closed form of PTRH, as for Zn²⁺ ion binding to PTRH, the λ_em get shift to 608 nm was accompanied by a pale yellow to pink colour (under visible light) and green to pinkish red fluorescence emission (under UV light) due to ring opening of the spirolactam moiety in the PTRH ligand. Spectral overlap of the donor emission band and the absorption band of the ring opened form of the acceptor moiety contributed towards the fluorescence resonance energy transfer ON mechanism for Zn²⁺ ion detection. The PTRH sensor had the lowest detection limit for Zn²⁺, found to be 2.89 × 10^?8 M. The sensor also demonstrated good sensing application with minimum toxicity for in vitro analyses using HeLa cells.