Silica‐modified luminescent LaPO4:Eu@LaPO4@SiO2 core/shell nanorods: Synthesis,structural and luminescent properties

Monoclinic‐type tetragonal LaPO₄:Eu (core) and LaPO₄:Eu@LaPO₄ (core/shell) nanorods (NRs) were successfully prepared using a urea‐based co‐precipitation process under ambient conditions. An amorphous silica layer was coated around the luminescent core/shell NRs via the sol–gel process to improve their solubility and colloidal stability in aqueous and non‐aqueous media. The prepared nano‐products were systematically characterized by X‐ray diffraction pattern, transmission electron microscopy, energy dispersive X‐ray analysis, and FTIR, UV/Vis, and photoluminescence spectroscopy to examine their phase purity, crystal phase, surface chemistry, solubility and luminescence characteristics. The length and diameter of the nano‐products were in the range 80–120 nm and 10–15 nm, respectively. High solubility of the silica‐modified core/shell/Si NRs was found for the aqueous medium. The luminescent core NRs exhibited characteristic excitation and emission transitions in the visible region that were greatly affected by surface growth of insulating LaPO₄ and silica layers due to the multiphonon relaxation rate. Our luminescence spectral results clearly show a distinct difference in intensities for core, core/shell, and core/shell/Si NRs. Highly luminescent NRs with good solubility could be useful candidates for a variety of photonic‐based biomedical applications.     

CdSe and CdSe/CdS core–shell QDs: New approach for synthesis,investigating optical properties and application in pollutant degradation

In this work, CdSe quantum dots (QDs) were synthesized by a simple and rapid microwave activated approach using CdSO₄, Na₂SeO₃ as precursors and thioglycolic acid (TGA) as capping agent molecule. A novel photochemical approach was introduced for the growth of CdS QDs and this approach was used to grow a CdS shell around CdSe cores for the formation of a CdSe/CdS core–shell structure. The core–shells were structurally verified using X‐ray diffraction, transmission electron microscopy and FTIR (Fourier‐transform infrared (FTIR)) spectroscopy. The optical properties of the samples were examined by means of UV–Vis and photoluminescence (PL) spectroscopy. It was found that CdS QDs emit a broad band white luminescence between 400 to 700 nm with a peak located at about 510 nm. CdSe QDs emission contained a broad band resulting from trap states between 450 to 800 nm with a peak located at 600 nm. After CdS shell growth, trap states emission was considerably quenched and a near band edge emission was appeared about 480 nm. Optical studies revealed that the core–shell QDs possess strong ultraviolet (UV) ? visible light photocatalytic activity. CdSe/CdS core–shell QDs, showed an enhancement in photodegradation of Methyl orange (MO) compared with CdSe QDs.     

Hydrothermal synthesis for high‐quality glutathione‐capped CdxZn1 – xSe and CdxZn1 – xSe/ZnS alloyed quantum dots and its application in Hg(II) sensing

High‐quality Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS core/shell quantum dots (QDs) emitting in the violet–green spectral range have been successfully prepared using hydrothermal methods. The obtained aqueous Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs exhibit a tunable photoluminescence (PL) emission (from 433.5 nm to 501.2 nm) and a favorable narrow photoluminescence bandwidth [full width at half maximum (FWHM): 30–42 nm]. After coating with a ZnS shell, the quantum yield increases from 40.2% to 48.1%. These Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were characterized by transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and Fourier transform infrared (FTIR) spectroscopy. To further understand the alloying mechanism, the growth kinetics of Cd_xZn_{1 – x}Se were investigated through measuring the fluorescence spectra and X‐ray diffraction spectra at different growth intervals. The results demonstrate that the inverted ZnSe/CdSe core/shell structure is formed initially after the injection of Cd²⁺. With further heating, the core/shell structured ZnSe/CdSe is transformed into alloyed Cd_xZn_{1 – x}Se QDs with the diffusion of Cd²⁺ into ZnSe matrices. With increasing the reaction temperature from 100 °C to 180 °C, the duration time of the alloying process decreases from 210 min to 20 min. In addition, the cytotoxicity of Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were investigated. The results indicate that the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs have low cytotoxicity, which makes them a promising probe for cell imaging. Finally, the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs were utilized to ultrasensitively and selectively detect Hg²⁺ ions with a low detection limit (1.8 nM).     

Luminescence properties of a novel red phosphor 6LaPO4–3La3PO7–2La7P3O18:Eu3+

Eu³⁺‐doped 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈ red luminescent phosphors were synthesized by co‐deposition and high‐temperature solid‐state methods and its polyphase state was confirmed by X‐ray diffraction analysis. Transmission electron microscopy showed the grain morphology as a mixture of rods and spheres. Luminescence properties of the phosphor were investigated and its red emission parameters were evaluated as a function of Eu³⁺ concentration (3.00–6.00 mol%). Excitation spectra of 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:Eu³⁺ showed strong absorption bands at 280, 395, and 466 nm, while the luminescence spectra exhibited prominent red emission peak centred at 615 nm (⁵D₀→⁷F₂) in the red region. CIE chromaticity coordinates of the 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:5%Eu³⁺ phosphor were (0.668, 0.313) in the red region, and defined its potential application as a red phosphor.     

Two‐channel near‐infrared fluorescence Ag+ ion sensing of a new star‐shaped dendrimer

A new near‐infrared fluorescence sensor PDI‐PD for Ag⁺ ions was successfully prepared and its structure characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR and high‐resolution mass spectrometry; matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (HRMS MALDI‐TOF). The probe exhibited rapid, sensitive, and selective two‐channel fluorescence responses towards Ag⁺ ions and protons. The probe has a marked high binding affinity and high sensitivity for Ag⁺, with a detection limit of 1.4 × 10^?6 M. An approximately five‐fold enhanced core emission at 784 nm was attributed to fluorescence resonance energy transfer (FRET). The enhanced core emission of the probe with Ag⁺ ions based on photo‐induced electron transfer and FRET is discussed. In addition, the probe presented a visible colour change. All experimental results demonstrated that PDI‐PD is an efficient tool for the selective, sensitive and rapid detection of Ag⁺ ions and protons using two‐channel fluorescence responses.     

Boron and nitrogen co‐doped carbon dots as a sensitive fluorescent probe for the detection of curcumin

In this present study, a fluorescent probe was developed to detect curcumin, which is derived from the rhizomes of the turmeric. We used a simple and economical way to synthesize boron and nitrogen co‐doped carbon dots (BNCDs) by microwave heating. The maximum emission wavelength of the BNCDs was 450 nm at an excitation wavelength of 360 nm. The as‐prepared BNCDs were characterized by multiple analytical techniques such as transmission electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and infrared spectroscopy. The synthesized carbon nanoparticles had an average particle diameter of 4.23 nm. The BNCDs exhibited high sensitivity to the detection of curcumin at ambient conditions. The changes of BNCDs fluorescent intensity show a good linear relationship with the curcumin concentrations in the range 0.2–12.5 μM. This proposed method has been successfully applied to detect the curcumin in urine samples with the recoveries of 96.5–105.5%.     

Extraction of Y2O3:Cr3+ nanophosphor by eco‐friendly approach and its suitability for white light‐emitting diode applications

Cr³⁺‐doped Y₂O₃ (0.5–9 mol%) was synthesized by a simple solution combustion method using Aloe vera gel as a fuel/surfactant. The final obtained product was calcined at 750°C for 3 h, which is the lowest temperature reported so far for the synthesis of this compound. The calcined product was confirmed for its crystallinity and purity by powder X‐ray diffraction (PXRD) studies which showed a single‐phase nano cubic phosphor. The particles size estimated by Scherrer formula was in the range of 6–19 nm. The UV–vis spectra showed absorption bands at 198, 272 and 372 nm having band gap energy in the range 4.00–4.26 eV. In order to investigate the possibility of its use in white light emitting display applications, the photoluminescence properties of Cr³⁺‐doped Y₂O₃ nanophosphors were studied at an excitation wavelength in the near ultraviolet (UV) light region (361 nm). The emission spectra consisted of emission peaks in the blue (⁴F_9/2 → ⁶H_15/2), orange (⁴F_9/2 → ⁶H_13/2) and red (⁴F_9/2 → ⁶H_11/2) regions. The CIE coordinates (0.33, 0.33) lie in the white light region. Hence Y₂O₃:Cr³⁺ can be used for white light‐emitting diode (LED) applications.     

Ca2Al2SiO7:Ce3+ phosphors for mechanoluminescence dosimetry

A series of Ce³⁺ ion single‐doped Ca₂Al₂SiO₇ phosphors was synthesized by a combustion‐assisted method at an initiating temperature of 600 °C. The samples were annealed at 1100 °C for 3 h and their X‐ray diffraction patterns confirmed a tetragonal structure. The phase structure, particle size, surface morphology and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) spectroscopy techniques. Thermoluminescence (TL) intensity increased with increase in ultraviolet (UV) light exposure time up to 15 min. With further increase in the UV irradiation time the TL intensity decreases. The increase in TL intensity indicates that trap concentration increased with UV exposure time. A broad peak at 121 °C suggested the existence of a trapping level. The peak of mechanoluminescence (ML) intensity versus time curve increased linearly with increasing impact velocity of the moving piston. Mechanoluminescence intensity increased with increase in UV irradiation time up to 15 min. Under UV‐irradiation excitation, the TL and ML emission spectra of Ca₂Al₂SiO₇:Ce³⁺ phosphor showed the characteristic emission of Ce³⁺ peaking at 400 nm (UV–violet) and originating from the Ce³⁺ transitions of 5d‐4f (²F_5/2 and ²F_7/2). The photoluminescence (PL) emission spectra for Ca₂Al₂SiO₇:Ce³⁺ were similar to the ML/TL emission spectra. The mechanism of ML excitation and the suitability of the Ca₂Al₂SiO₇:Ce³⁺phosphor for radiation dosimetry are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

An efficient orange–red‐emitting LiNa3P2O7:Sm3+ pyrophosphate: Structural and optical analysis for solid‐state lighting

A trivalent rare‐earth ion (Sm³⁺)‐doped LiNa₃P₂O₇ (LNPO) phosphor was synthesized using a conventional high‐temperature solid‐state reaction route. A predominant orthorhombic phase of LNPO was observed in all X‐ray diffraction patterns. The surface states of the LNPO:Sm phosphor were confirmed by X‐ray photoelectron spectroscopy. Under 401 nm excitation, the Sm‐doped LNPO phosphors showed sharp emission peaks at 563, 600 and 647 nm that are related to the f–f transition of Sm³⁺ ions. The optimum concentration of Sm³⁺ (9 mol%) produced Commission Internationale de l'Eclairage chromaticity coordinates, color rendering index and correlated color temperature of (0.564, 0.434), 42 and 1843 K, respectively.     

Synthesis and characterization of a stable dispersion of multifunctional Gd2O3:Er,Yb in polyvinyl alcohol

A stable dispersion of multifunctional Gd₂O₃:Er,Yb phosphor in polyvinyl alcohol (PVA) was synthesized by varying the concentration of Yb³⁺ ions. It had a strong ultraviolet–visible‐near infrared (UV–vis) upconversion emission and applications in temperature and magnetic field sensors (e.g., nano‐heaters), as well as potential use in bioleveling and bioimaging. Stability of the dispersion was found to strongly depend on the mixing process of the powder in the polymer solution. Spherical shaped nanoparticles in cubic phase of ~ 43 nm diameter were synthesized and characterized by X‐ray diffraction; results were confirmed by scanning electron microscopy (SEM). Fourier transform infrared sspectroscopy (FT‐IR) and thermal analysis supported the presence of PVA. NIR pumping produced strong UC emission bands in the red and green regions extending up to very high UV (240 nm). This method provides an alternative for synthesizing a highly UC‐efficient non‐agglomerated pure transparent dispersion from various efficient phosphors for biological applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of novel Dy3+ activated Ba2CaZn2Si6O17 phosphors for white light‐emitting diodes

Dysprosium ion (Dy³⁺) activated Ba₂CaZn₂Si₆O₁₇ phosphors were synthesized using high temperature solid‐state reaction method. Powder X‐ray diffraction (PXRD) analysis confirmed the phase formation of the as‐prepared phosphors. Scanning electron microscopy (SEM) analysis disclosed an agglomeration of particles with an irregular morphology. Under 350 nm excitation, the emission spectrum of Dy³⁺ ions showed bands at 481 nm (blue), 577 nm (yellow) and 674 nm (red). The influence of the Dy³⁺ concentration on its emission intensity was investigated. The optimum concentration of Dy³⁺ ions in the Ba₂CaZn₂Si₆O₁₇:Dy³⁺ phosphors were found to be x = 0.06. The critical energy transfer distance was calculated. The fluorescence lifetime was also determined for Ba₂CaZn₂Si₆O₁₇:0.06Dy³⁺. The Commission International deI’Eclairage (CIE) chromaticity coordinates of the phosphor were calculated to be x = 0.304, y = 0.382. The activation energy for the thermal quenching was calculated to be 0.168 eV. These results indicated that the Ba₂CaZn₂Si₆O₁₇:Dy³⁺ phosphor might be a potential candidate for near ultraviolet (NUV)‐based white light‐emitting diodes.     

Thermoluminescence and photoluminescence studies on γ‐ray‐irradiated Ce3+,Tb3+‐doped potassium chloride single crystals

Single crystals of KCl doped with Ce³⁺,Tb³⁺ were grown using the Bridgeman–Stockbarger technique. Thermoluminescence (TL), optical absorption, photoluminescence (PL), photo‐stimulated luminescence (PSL), and thermal‐stimulated luminescence (TSL) properties were studied after γ‐ray irradiation at room temperature. The glow curve of the γ‐ray‐irradiated crystal exhibits three peaks at 420, 470 and 525 K. F‐Light bleaching (560 nm) leads to a drastic change in the TL glow curve. The optical absorption measurements indicate that F‐ and V‐centres are formed in the crystal during γ‐ray irradiation. It was attempted to incorporate a broad band of cerium activator into the narrow band of terbium in the KCl host without a reduction in the emission intensity. Cerium co‐doped KCl:Tb crystals showed broad band emission due to the d–f transition of cerium and a reduction in the intensity of the emission peak due to ⁵D₃–⁷F_j (j = 3, 4) transition of terbium, when excited at 330 nm. These results support that energy transfer occurs from cerium to terbium in the KCl host. Co‐doping Ce³⁺ ions greatly intensified the excitation peak at 339 nm for the emission at 400 nm of Tb³⁺. The emission due to Tb³⁺ ions was confirmed by PSL and TSL spectra. Copyright © 2015 John Wiley & Sons, Ltd.     

Microwave‐assisted sintering synthesis of greenish‐yellow emitting Sr2SiO4:Eu2+ phosphors

Europium ion (Eu²⁺) doped Sr₂SiO₄ phosphors with greenish‐yellow emission were synthesized using microwave‐assisted sintering. The phase structure and photoluminescence (PL) properties of the obtained phosphor samples were investigated. The PL excitation spectra of the Sr₂SiO₄:Eu²⁺ phosphors exhibited a broad band in the range of 260 nm to 485 nm with a maximum at 361 nm attributed to the 5f‐4d allowed transition of the Eu²⁺ ions. Under an excitation at 361 nm, the Sr₂SiO₄:Eu²⁺ phosphor exhibited a greenish‐yellow emission peak at 541 nm with an International‐Commission‐on‐Illumination (CIE) chromaticity of (0.3064, 0.4772). The results suggest that the microwave‐assisted sintering method is promising for the synthesis of phosphors owing to the decreased sintering time without the use of additional reductive agents.     

Nd3+‐Yb3+/Nd3+‐Yb3+‐Li+ co‐doped Gd2O3 phosphors for up and down conversion luminescence

Frequency up‐conversion (UC) emission from the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped gadolinium oxide (Gd₂O₃) phosphors prepared by the solution combustion technique in the visible range have been studied by using 980 nm near infrared (NIR) laser diode excitation. The crystalline structure and formation of the cubic phase has been confirmed with the help of X‐ray diffraction (XRD) studies. XRD peak shifts have been found towards the lower diffraction angle side in the case of the Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. Surface morphology and particle size information have been observed by using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis. Down‐conversion emission study under 351 nm excitation in the visible region for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors has been performed. The UC emission bands lying in the green and red region arising from the Nd³⁺ ions have been enhanced by ~260 times, ~113 times due to incorporation of Li⁺ ions in the Nd³⁺‐Yb³⁺ co‐doped phosphors. Photometric characterization has been done for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. The present study suggests the capability of the synthesized phosphors in near‐infrared (NIR) to visible upconverter and luminescent device applications.     

Spectral‐converting study of Ba9–3(m+n)/2ErmYbnY2Si6O24 (m = 0.005 – 0.2, n = 0 – 0.3) orthosilicate phosphors

Optical materials composed of Ba_9–3(m+n)/2Er_mYb_nY₂Si₆O₂₄ (m = 0.005–0.2, n = 0–0.3) were prepared using a solid‐state reaction. The X‐ray diffraction patterns of the obtained phosphors were examined to index the peak positions. The photoluminescence (PL) excitation and emission spectra of the Er³⁺‐activated phosphors and the critical emission quenching as a function of Er³⁺ content in the Ba_9–3m/2Er_mY₂Si₆O₂₄ structure were monitored. The spectral conversion properties of Er³⁺ and Er³⁺–Yb³⁺ ions doped in Ba₉Y₂Si₆O₂₄ phosphors were elucidated under diode‐laser irradiation at 980 nm. Up‐conversion emission spectra and the dependence of the emission intensity on pump power for the Ba_8.55Er_0.1Yb_0.2Y₂Si₆O₂₄ phosphor were investigated. The desired up‐conversion of the emitted light, which passed through the green, yellow, orange and red regions of the spectrum, was achieved through the use of appropriate Er³⁺ and/or Yb³⁺ concentrations in the host structure and 980 nm excitation light. The up‐conversion mechanism in the phosphors is described by an energy‐level schematic. Copyright © 2015 John Wiley & Sons, Ltd.     

Enhanced photoluminescence properties of electrospun Dy3+‐doped ZnO nanofibres for white lighting devices

Dy³⁺‐doped ZnO nanofibres with diameters from 200 to 500 nm were made using an electrospinning technique. The as‐fabricated amorphous nanofibres resulted in good crystalline continuous nanofibres through calcination. Dy³⁺‐doped ZnO nanofibres were characterized using scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) light spectroscopy, Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL). XRD showed the well defined peaks of ZnO. UV–vis spectra showed a good absorption band at 360 nm. FTIR spectra showed a Zn–O stretching vibration confirming the presence of ZnO. Photoluminescence spectra of Dy³⁺‐doped ZnO nanofibres showed an emission peak in the visible region that was free from any ZnO defect emission. Emissions at 480 nm and 575 nm in the Dy³⁺‐doped ZnO nanofibres were the characteristic peaks of dopant Dy³⁺ and implied efficient energy transfer from host to dopant. Luminescence intensity was found to be increased with increasing doping concentration and reduction in nanofibre diameter. Colour coordinates were calculated from photometric characterizations, which resembled the properties for warm white lighting devices.     

Luminescence study and dosimetry approach of Ce on an α‐Sr2P2O7 phosphor synthesized by a high‐temperature combustion method

We report synthesis of a cerium‐activated strontium pyrophosphate (Sr₂P₂O₇) phosphor using a high‐temperature combustion method. Samples were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), photoluminescence (PL) and thermoluminescence (TL). The XRD pattern reveals that Sr₂P₂O₇ has an α‐phase with crystallization in the orthorhombic space group of Pnam. The IR spectrum of α‐Sr₂P₂O₇ displays characteristic bands at 746 and 1190 cm^‐1 corresponding to the absorption of (P₂O₇)^‐4. PL emission spectra exhibit a broad emission band around 376 nm in the near‐UV region due to the allowed 5d–4f transition of cerium and suggest its applications in a UV light‐emitting diode (LED) source. PL also reveals that the emission originates from 5d–4f transition of Ce³⁺ and intensity increases with doping concentration. TL measurements made after X‐ray irradiation, manifest a single intense glow peak at around 192°C, which suggests that this is an outstanding candidate for dosimetry applications. The kinetic parameters, activation energy and frequency factor of the glow curve were calculated using different analysis methods. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydrothermal growth of Zn2SnO4:Eu,Ca for red emission

Zinc stannate (Zn₂SnO₄) and Zn₂SnO₄ codoped with Eu³⁺ and Ca²⁺ (ZTO:Eu,Ca) were synthesized by hydrothermal method and characterized with X‐ray diffraction (XRD), energy‐dispersive X‐ray analysis (EDAX), Raman spectrometer, field emission scanning electron microscopy (FESEM), ultraviolet‐visible (UV‐vis) and photoluminescence (PL) spectrophotometers. PL analysis of Zn₂SnO₄ gives broad defect induced emission in the region 500–750 nm. The crystal structure of Zn₂SnO₄ was retained even with a nominal doping of Eu, Ca and its combination in the Zn₂SnO₄. The Eu³⁺ ions were found to occupy the non‐centrosymmetric sites of the Zn₂SnO₄ and gave emissions at 592, 615 and 702 nm. Zn₂SnO₄:Eu,Ca showed red emission at 615 nm attributed to the electronic transition from the excited state ⁵D₀ → ⁷F₂ of the 4f⁶ configuration of Eu³⁺. Nominal codoping of Eu³⁺ and Ca²⁺ ions promoted the quenching of orange emission from Eu³⁺ in Zn₂SnO₄:Eu,Ca.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.