Colorimetric detection of gallic acid based on the enhanced oxidase‐like activity of floral‐like magnetic Fe3O4@MnO2

In this study, a colorimetric method was developed for rapid and sensitive determination of gallic acid (GA) by using floral‐like magnetic Fe₃O₄@MnO₂ composite material with enhanced oxidase‐like activity. Fe₃O₄@MnO₂ composite material is able to oxidize 3,3′,5,5′‐tetramethylbenzidine (TMB) to a blue product (oxTMB) with apparent color change and absorbance at 652 nm. GA can reduce the oxTMB yielding a fading blue color. Based on these results, a technique is proposed to detect GA quantitatively and qualitatively with UV–vis spectroscopy and bare eyes. A low detection limit of 0.105 μM and a detection range of 0.01 to 15 μM were obtained with UV–vis spectroscopy. This methodology possesses high potential for application in determination of GA.     

‘Turn‐on’ fluorescence sensing of hydrogen peroxide in marine food samples using a carbon dots–MnO2 probe

A ‘turn‐on’ fluorescence method for detection of hydrogen peroxide (H₂O₂) in marine food samples is presented in this article. Using this method, a carbon dots (CDs)–MnO₂ probe was formed in which fluorescence intensity (FI) of CDs was quenched through fluorescence resonance energy transfer by addition of MnO₂ nanosheets. When H₂O₂ was added into the CDs–MnO₂ solution, the MnO₂ nanosheets formed Mn²⁺ ions due to a redox reaction between H₂O₂ and MnO₂ nanosheets, and CD FI was recovered. Under optimized conditions, the detection limit for H₂O₂ was 0.87 μM, and analytical linear range was 4–100 μM. Furthermore, this developed fluorescence sensing system was successfully used with satisfactory results to determine trace H₂O₂ content in marine food samples.     

A colorimetric detection of dopamine in urine and serum based on the CeO2@ZIF-8/Cu-CDs laccase-like nanozyme activity

This study reports a sensitive and selective colorimetric approach for the analysis of dopamine (DA) based on CeO₂@ZIF-8/Cu-CDs laccase-like nanozymes activity. The CeO₂@ZIF-8/Cu-CDs was synthesized using cerium oxide (CeO₂) and copper-doped carbon dots (Cu-CDs) with 2-methylimidazole by a facilely hydrothermal approach. The CeO₂@ZIF-8/Cu-CDs exhibited excellent laccase-like nanozymes activity and can oxidize the colorless substrate (DA) to red product with 4-aminoantipyrine as the chromogenic agent. The Michaelis–Menten constant (K_m) and the maximal velocity (V_max) of CeO₂@ZIF-8/Cu-CDs are 0.20 mM and 1.48 μM/min, respectively. The detection method has a linear range of 0.05–7.5 μg/mL and a detection limit as low as 8.5 ng/mL with good reproducibility. The developed colorimetric sensor was applied to rapid and precise quantitative evaluation of DA levels in serum and urine samples. This study presents a new approach for detecting biological molecules by utilizing the controlled regulation of nanozymes' laccase-like activity.     

Development of a colorimetric colony‐screening assay for detection of defluorination by micro‐organisms

Aims: To develop a colorimetric colony‐screening assay to facilitate the isolation of micro‐organisms capable of defluorination. Methods and Results: A metal‐dye chelate, zirconium‐xylenol orange was used to detect fluoride ions released from a fluorinated substrate through microbial metabolism. Depolymerised zirconium reagent gave the greatest visual contrast for the presence of fluoride compared to more polymerised forms of zirconium reagent. The sensitivity of the assay was greatest when the molar ratio of depolymerised zirconium to xylenol orange was 1 : 2. Using depolymerised zirconium and xylenol orange (150 and 300 nmol l^?1 respectively), the assay could detect a fluoride application spot (5 mmol l^?1) containing 50 nmoles of fluoride ions. Most media constituents were well tolerated by the assay, although phosphate ions needed to be restricted to 0·1 g l^?1 and some proteins digest to between 1 and 5 g l^?1. A microbial enrichment culture growing on solidified medium containing 20 mmol l^?1 fluoroacetate was screened using the assay, and defluorinating bacteria belonging to the genus Burkholderia isolated. Conclusions: A method was developed that is sensitive, rapid and reliable for detecting defluorination by micro‐organisms growing on solidified medium. Significance and Impact of the Study: This method can be used to facilitate the isolation of micro‐organisms capable of defluorination.     

Redox‐modulated colorimetric detection of ascorbic acid and alkaline phosphatase activity with gold nanoparticles

Gold nanoparticles (AuNPs) exhibit characteristic absorption peaks in the ultraviolet visible region due to their special surface plasmon resonance effect. This characteristic absorption peak would change with the relative colour varying from wine red to orange‐yellow upon sequential addition of ascorbic acid (AA) into the mixture of AuNPs and Ag(I). Similar observations also could be found when the hydrolysis product of sodium l ‐ascorbyl‐2‐phosphate with alkaline phosphatase (ALP) was used as an alternative to AA. Results of structure characterization confirmed that the phenomena were due to the reduction of Ag(I) to Ag(0) on the surface of AuNPs and the formation of core‐shell AuNPs@Ag. Therefore, a colorimetric assay for rapid visual detection of AA and ALP based on redox‐modulated silver deposition on AuNPs has been proposed. Under the optimal experimental conditions, the absorbance variation ΔA_{522 nm}/A_{370 nm} of AuNPs was proportional to the concentration of AA (5–60 μmol/L) and ALP (3–18 U/L) with the corresponding detection limit of 2.44 μmol/L for AA and 0.52 U/L for ALP. The assay showed excellent selectivity towards AA and ALP. Moreover, the assay has been applied to detect AA and ALP activity in real samples with satisfying results.     

Surface‐Guided Formation of Amorphous Mixed‐Metal Oxyhydroxides on Ultrathin MnO2 Nanosheet Arrays for Efficient Electrocatalytic Oxygen Evolution

Earth‐abundant amorphous nanomaterials with rich structural defects are promising alternative catalysts to noble metals for an efficient electrochemical oxygen evolution reaction; however, their inferior electrical conductivity and poor morphological control during synthesis hamper the full realization of their potency in electrocatalysis. Herein, a rapid surface‐guided synthetic approach is proposed to introduce amorphous and mixed‐metal oxyhydroxide overlayers on ultrathin Ni‐doped MnO₂ (Ni? MnO₂) nanosheet arrays via a galvanic replacement mechanism. This method results in a monolithic 3D porous catalyst with a small overpotential of only 232 mV to achieve a current density of 10 mA cm^?2 in 1 m KOH, which is much lower than the corresponding value of 307 mV for the Ni? MnO₂ reference sample. Detailed structural and electrochemical characterization reveal that the unique Ni? MnO₂ ultrathin nanosheet arrays do not only provide a large surface area to guide the formation of active amorphous catalyst layers but also ensure the effective charge transport owing to their high electron conductivity, collectively contributing to the greatly improved catalyst activity. It is envisioned that this highly operable surface‐guide synthetic strategy may open up new avenues for the design and fabrication of novel 3D nanoarchitectures integrated with functional amorphous materials for broadened ranges of applications.     

Exosomes from hypoxic endothelial cells have increased collagen crosslinking activity through up‐regulation of lysyl oxidase‐like 2

Exosomes are important mediators of intercellular communication. Additionally, they contain a variety of components capable of interacting with the extracellular matrix (ECM), including integrins, matrix metalloproteinases and members of the immunoglobin superfamily. Despite these observations, research on exosome‐ECM interactions is limited. Here, we investigate whether the exosome‐associated lysyl oxidase family member lysyl oxidase‐like 2 (LOXL2) is involved in ECM remodelling. We found that LOXL2 is present on the exterior of endothelial cell (EC)‐derived exosomes, placing it in direct vicinity of the ECM. It is up‐regulated twofold in EC‐derived exosomes cultured under hypoxic conditions. Intact exosomes from hypoxic EC and LOXL2 overexpressing EC show increased activity in a fluorometric lysyl oxidase enzymatic activity assay as well as in a collagen gel contraction assay. Concordantly, knockdown of LOXL2 in exosome‐producing EC in both normal and hypoxic conditions reduces activity of exosomes in both assays. Our findings show for the first time that ECM crosslinking by EC‐derived exosomes is mediated by LOXL2 under the regulation of hypoxia, and implicate a role for exosomes in hypoxia‐regulated focal ECM remodelling, a key process in both fibrosis and wound healing.     

Nuclear fast red‐based colorimetric sensors for sensitive and selective detection of Ag ions

The reduction of nuclear fast red (NFR) stain by sodium tetrahydroboron was catalyzed in the presence of silver ions (Ag⁺). The fluorescence properties of reduced NFR differed from that of NFR. The product showed fluorescence emission at 480 nm with excitation at 369 nm. Furthermore, the fluorescence intensity of the mixture increased strongly in the presence of Ag⁺ and Britton–Robinson buffer at pH 4.78. There was a good linear relationship between increased fluorescence intensity (ΔI) and Ag⁺ concentration in the range 5.0 × 10^?9 to 5.0 × 10^?8 M. The correlation coefficient was 0.998, and the detection limit (3σ/k) was 1.5 × 10^?9 M. The colour of the reaction system changed with variation in Ag⁺ concentration over a wide range. Based on the colour change, a visual semiquantitative detection method for recognition and sensing of Ag⁺ was developed for the range 1.0 × 10^?8 to 5.0 × 10^?4 M, with an indicator that was visible to the naked eye. Therefore, a sensitive, simple method for determination of Ag⁺ was developed. Optimum conditions for Ag⁺ detection, the effect of other ions and the analytical application of Ag⁺ detection of synthesized sample were investigated.     

Comparison of colorimetric and chemiluminescent enzyme‐linked immunosorbent assay for the detection of endosulfan in food samples

Pesticides have become part of food protection since their inception. Endosulfan, an organochlorine insecticide, has been used against insect pests such as whiteflies, aphids, red spiders and mites. Methods of immunochemical assays have been devised for the determination and analysis of pesticides and commonly used for the analysis of contaminants in food, water, soil and body fluids. Chicken IgY antibodies raised against endosulfan haptens were used for the detection of endosulfan. We have compared colorimetric (CO) and chemiluminescence (CL) enzyme‐linked immunosorbent assay (ELISA) techniques for the detection of endosulfan isomers in a food matrix. CL ELISA assay was found to be more sensitive than CO assay. The mean recovery was 81.2–95.6% for α‐ and β‐endosulfan‐spiked food samples with 2.8–4.6% relative standard deviation. The detection of the endosulfan isomers was linear in the range 100 µg/mL–5 fg/mL, with a limit of detection at 100 µg/mL and 5 fg/mL for the CL ELISA method and 100 µg/mL and 1 ng/mL for the CO ELISA method respectively. These methods can be used for the rapid and reliable detection of organochlorine pesticide endosulfan. Copyright © 2015 John Wiley & Sons, Ltd.     

Ultrasensitive and selective colorimetric detection of uric acid using peroxidase mimetic activity of biogenic palladium nanoparticles

Uric acid (2,6,8-trihydroxypurine) is a metabolic product of purine, which is one of the important markers of human health. The development of a rapid, facile, highly sensitive, and selective method for uric acid detection is critical for the diagnosis of related diseases and is still a strategic challenge. In this study, we developed a highly sensitive and selective colorimetric assay for the detection of uric acid using biogenic palladium nanoparticles (Pd NPs). The synthesized nanoparticles were shown to acquire peroxidase mimetic activity that oxidized 3,3′,5,5′-tetramethylbenzidine and produced a blue colour in an assay. The developed colorimetric assay is instrument-free detection of uric acid with a limit of detection of 0.05 μM and a 1.11 μM limit of quantification (LOQ). This is the first report determining the LOQ for a colorimetric assay that gives the lowest quantity of analyte that can be evaluated with more precision under the specified conditions of the analysis. The developed assay had a linear response at low uric acid concentrations of 0.05 to 1 μM and a 0.99841 linear regression correlation coefficient. This colorimetric detection provides a rapid, cost-effective, and easy-to-use platform for the clinical diagnosis of uric acid biomarkers.     

A colorimetric and fluorescent probe for fluoride ions based on 6‐acetyl‐2‐naphthol

A colorimetric and turn‐on fluorescent probe for fluoride ions, tert‐butyldimethylsilane 6‐acetyl‐2‐naphtholate, was readily synthesized from 6‐acetyl‐2‐naphthol and tert‐butyldimethylchlorosilane (TBSCl). The probe exhibits high sensitivity and good selectivity for fluoride ions in acetonitrile. The inherent mechanism involves the cleavage of the Si–O bond in the probe, which induced yellow color formation and prominent fluorescence enhancement. Copyright © 2013 John Wiley & Sons, Ltd.     

A highly selective colorimetric and long‐wavelength fluorescent probe for the detection of Hg2+

Currently, the fluorescent probe is an important method for detecting heavy metal ions, especially mercury ion (Hg²⁺), which is harmful to the health of humans and the environment due to its toxicity and extensive use. In this paper, we designed and synthesized a colorimetric and long‐wavelength fluorescent probe Hg‐P with high sensitivity and excellent selectivity, which could detect Hg²⁺ by the changes of visual color, fluorescence and absorption spectroscopy. With the addition of Hg²⁺ to probe Hg‐P solution, its color changed from yellow to pink, and showed a 171 nm red‐shifted absorption spectrum. Probe Hg‐P was used in real water and soil solution samples to detect Hg²⁺, and the result is satisfactory. Therefore, this new probe shows great value and application in detecting Hg²⁺ in the environment.     

Bioluminescence‐based cytotoxicity assay for simultaneous evaluation of cell viability and membrane damage in human hepatoma HepG2 cells

We have developed a bioluminescence‐based non‐destructive cytotoxicity assay in which cell viability and membrane damage are simultaneously evaluated using Emerald luciferase (ELuc) and endoplasmic reticulum (ER)‐targeted copepod luciferase (GLuc‐KDEL), respectively, by using multi‐integrase mouse artificial chromosome (MI‐MAC) vector. We have demonstrated that the time‐dependent concentration response curves of ELuc luminescence intensity and WST‐1 assay, and GLuc‐KDEL luminescence intensity and lactate dehydrogenase (LDH) activity in the culture medium accompanied by cytotoxicity show good agreement in toxicant‐treated ELuc‐ and GLuc‐KDEL‐expressing HepG2 stable cell lines. We have clarified that the increase of GLuc‐KDEL luminescence intensity in the culture medium reflects the type of cell death, including necrosis and late apoptosis, but not early apoptosis. We have also uncovered a strong correlation between GLuc‐KDEL luminescence intensity in the culture medium and the extracellular release of high mobility group box 1 (HMGB1), a representative damage‐associated molecular pattern (DAMP) molecule. The bioluminescence measurement assay using ELuc and GLuc‐KDEL developed in this study can simultaneously monitor cell viability and membrane damage, respectively, and the increase of GLuc‐KDEL luminescence intensity in the culture medium accompanied by the increase of cytotoxicity is an index of necrosis and late apoptosis associated with the extracellular release of DAMP molecules.     

A highly sensitive resonance Rayleigh scattering and colorimetric assay for the recognition of propranolol in β‐adrenergic blocker

In this work, a highly sensitive, citrate anion‐capped gold nanoparticles (AuNPs)‐based assay for the determination of propranolol in real samples with resonance Rayleigh scattering (RRS) and colorimetry was developed. When AuNPs were prepared by the sodium citrate reduction method, citrate anions self‐assembled on the surface of AuNPs to form supramolecular complex anions. In BR 4.6 buffer solution, propranolol was positively charged and could bind with AuNPs to form larger aggregates through electrostatic force and hydrophobic effects. This results in remarkable enhancement of the RRS intensity and a color change in the AuNPs solution from red to blue via purple. Thus, a highly sensitive RRS and colorimetric assay the for detection of propranolol was developed with a linear range of 0.2–5.2 and 8–112 ng/ml, respectively. In addition, no difference was seen when comparing R‐propranolol with S‐propranolol, therefore, this method could not be used in the recognition of chiral propranolol. However, upon addition of other β‐adrenergic blockers, no phenomenon like that seen with propranolol was observed, meaning that this method can be used for determining the presence of propranolol in a mixture β‐adrenergic blockers. Finally, the optimum conditions, factors influencing the reaction, its mechanism and the reasons for enhancement of the RRS were discussed.     

Colorimetric detection of oxalate in aqueous solution by a pyrogallol red‐based Cu2+ complex

The pyrogallol red (PR)‐based Cu²⁺ complex was proven to be an effective and selective colorimetric chemosensing ensemble for recognition of oxalate over other anions in a perfect aqueous solution. The addition of oxalate to the PR–Cu²⁺ complex resulted in a colour change from purple to orange colour due to the regeneration of PR by the chelation of oxalate with Cu²⁺, while other anions did not induce any significant colour change. Moreover, it was revealed that no obvious interference was observed during the titrations with oxalate into each other anion. Therefore, the PR–Cu²⁺ complex can be used as a simple and practical colorimetric chemosensor for detecting oxalate.     

Synthesis,Characterization, and Structural Modeling of High‐Capacity,Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells

It has become clear that cycling lithium‐oxygen cells in carbonate electrolytes is impractical, as electrolyte decomposition, triggered by oxygen reduction products, dominates the cell chemistry. This research shows that employing an α‐MnO₂/ramsdellite‐MnO₂ electrode/electrocatalyst results in the formation of lithium‐oxide‐like discharge products in propylene carbonate, which has been reported to be extremely susceptible to decomposition. X‐ray photoelectron data have shown that what are likely lithium oxides (Li₂O₂ and Li₂O) appear to form and decompose on the air electrode surface, particularly at the MnO₂ surface, while Li₂CO₃ is also formed. By contrast, cells without α‐MnO₂/ramsdellite‐MnO₂ fail rapidly in electrochemical cycling, likely due to the differences in the discharge product. Relatively high electrode capacities, up to 5000 mAh/g (carbon + electrode/electrocatalyst), have been achieved with non‐optimized air electrodes. Insights into reversible insertion reactions of lithium, lithium peroxide (Li₂O₂) and lithium oxide (Li₂O) in the tunnels of α‐MnO₂, and the reaction of lithium with ramsdellite‐MnO₂, as determined by first principles density functional theory calculations, are used to provide a possible explanation for some of the observed results. It is speculated that a Li₂O‐stabilized and partially‐lithiated electrode component, 0.15Li₂O·α‐Li_xMnO₂, that has Mn^4+/3+ character may facilitate the Li₂O₂/Li₂O discharge/charge chemistries providing dual electrode/electrocatalyst functionality.     

A colorimetric probe for detection of Cu2+ by the naked eye and application in test paper

A novel colorimetric probe RP1 was synthesized using rhodamine derivatives and heterocyclic compounds for the purpose of detecting Cu²⁺. RP1 showed good selectivity, high sensitivity and affinity toward Cu²⁺ over other competing ions in CH₃OH–H₂O (1/1, v/v) solution. Absorbance intensity showed a good linear fit between probe R1 and Cu²⁺ over the concentration range 1–8 μM and the association constant was also calculated to be 1.145 × 10⁵ M^?1. The sensing mechanism was deduced using Job's plot, Fourier transform infrared spectroscopy, and density functional theory studies. In addition, the colorimetric experiment indicated that probe RP1 could be made into test paper to detect Cu²⁺ with a colour change from colourless to pink.     

Atomic Structure of Li2MnO3 after Partial Delithiation and Re‐Lithiation

Li₂MnO₃ is the parent compound of the well‐studied Li‐rich Mn‐based cathode materials xLi₂MnO₃·(1‐x)LiMO₂ for high‐energy‐density Li‐ion batteries. Li₂MnO₃ has a very high theoretical capacity of 458 mA h g^?1 for extracting 2 Li. However, the delithiation and lithiation behaviors and the corresponding structure evolution mechanism in both Li₂MnO₃ and Li‐rich Mn‐based cathode materials are still not very clear. In this research, the atomic structures of Li₂MnO₃ before and after partial delithiation and re‐lithiation are observed with spherical aberration‐corrected scanning transmission electron microscopy (STEM). All atoms in Li₂MnO₃ can be visualized directly in annular bright‐field images. It is confirmed accordingly that the lithium can be extracted from the LiMn₂ planes and some manganese atoms can migrate into the Li layer after electrochemical delithiation. In addition, the manganese atoms can move reversibly in the (001) plane when ca. 18.6% lithium is extracted and 12.4% lithium is re‐inserted. LiMnO₂ domains are also observed in some areas in Li_1.63MnO₃ at the first cycle. As for the position and occupancy of oxygen, no significant difference is found between Li_1.63MnO₃ and Li₂MnO₃.     

Self-dissociative primers for nucleic acid amplification and detection based on DNA quadruplexes with intrinsic fluorescence

We have developed a new method, quadruplex priming amplification, to greatly simplify nucleic acid amplification and real-time quantification assays. The method relies on specifically designed guanine-rich primers, which after polymerase elongation are capable of spontaneous dissociation from target sites and forming DNA quadruplex. The quadruplex is characterized by significantly more favorable thermodynamics than the corresponding DNA duplexes. As a result, target sequences are accessible for the next round of priming and DNA amplification proceeds under isothermal conditions with improved product yield. In addition, the quadruplex formation is accompanied by an increase in intrinsic fluorescence of the primers, allowing simple and accurate detection of product DNA.