Large-scale isolation of covalently closed circular DNA using gel filtration chromatography

The isolation of covalently closed circular (ccc) DNA free of contamination by RNA and other forms of DNA is fundamental to molecular biology. A variety of methods have been explored but CsCl density-gradient centrifugation remains the method most widely used for preparative scale resolution. The process is expensive, time-consuming, requires the use of large amounts of the carcinogen ethidium bromide, and is subject to considerable variation in yield and purity. To avoid these problems, we have devised a procedure for the preparation of cell lysates which results in consistently good yields of biologically active ccc DNA minimally contaminated with chromosomal DNA fragments and RNA. Lysates are deproteinized, precipitated with CaCl2 to remove rRNA, concentrated by ethanol precipitation, and applied to a Sephacryl S-1000 column which resolves chromosomal fragments, open circular plasmid DNA, and residual RNA from the ccc DNA. We have found that substituting the gel filtration column for CsCl density-gradient centrifugation results in substantially better purification as well as reducing processing time, cost, and degree of difficulty. The time required from harvest of cells to final recovery of DNA is about 16 h. We have used the method to isolate plasmids from 4.4 to 12 kb and, with slight modifications, recombinant M13 replicative form DNAs.     

Plasmid DNA purification

The demand for efficient production methods of plasmid DNA (pDNA) has increased vastly in response to rapid advances in the use of pDNA in gene therapy and in vaccines since the advantageous safety concerns associated with non-viral over viral vectors.A prerequisite for the success of plasmid-based therapies is the development of cost-effective and generic production processes of pDNA. However, to satisfy strict regulatory guidelines, the material must be available as highly purified, homogeneous preparations of supercoiled circular covalently closed (ccc) pDNA. Large-scale production of pDNA for therapeutic use is a relatively new field in bioprocessing. The shift from small-scale plasmid production for cell transfection to large-scale production sets new constraints on the bacterial fermentation, processing of bacterial lysate and final purification and formulation of the plasmid DNA. The choice of bacterial strain used for plasmid cultivation affects the plasmid yield, the proportion of different isoforms and the amount of endotoxins in the starting material. The choice of bacterial strain will be greatly influenced by the production and purification procedures of pDNA. Master and working cell banks need to be characterised and established. Alkaline lysis of the bacteria damages the pDNA, resulting in a reduced recovery of ccc pDNA and an increase in partially denaturated ccc pDNA and open circular (oc) forms. Shear stress in these processes needs to be tightly controlled, and buffer composition and pH need to be optimised. To obtain a homogeneous plasmid DNA preparation, different pDNA purification strategies aim at capturing ccc pDNA and eliminating the oc isoform. A highly purified final product corresponding to the stringent recommendations set forth by health and regulatory authorities can be achieved by (i). different chromatography techniques integrated with ultra/diafiltration to achieve optimal purification results; (ii). the formulation of the final pDNA product, that requires a detailed study of the plasmid structure; and (iii). the development of sensitive analytical methods to detect different impurities (proteins, RNA, chromosomal DNA, and endotoxins). We present here a revue of the whole process to obtain such a plasmid DNA, and report an example of RNAse-free purification of ccc pDNA that could be used for gene therapy.     

Isolation of circular yeast artificial chromosomes for synthetic biology and functional genomics studies

Circular yeast artificial chromosomes (YACs) provide significant advantages for cloning and manipulating large segments of genomic DNA in Saccharomyces cerevisiae. However, it has been difficult to exploit these advantages, because circular YACs are difficult to isolate and purify. Here we describe a method for purification of large circular YACs that is more reliable compared with previously described protocols. This method has been used to purify YACs up to 600 kb in size. The purified YAC DNA is suitable for restriction enzyme digestion, DNA sequencing and functional studies. For example, YACs carrying full-size genes can be purified from yeast and used for transfection into mammalian cells or for the construction of a synthetic genome that can be used to produce a synthetic cell. This method for isolating high-quality YAC DNA in microgram quantities should be valuable for functional and synthetic genomic studies. The entire protocol takes ～3 d to complete.     

RNA isolation from yeast using silica matrices.

RNA isolation from yeast is complicated by the need to initially break the cell wall. While this can be accomplished by glass bead disruption or enzyme treatment, these approaches result in DNA contamination and/or the need for incubation periods. We have developed a protocol for the isolation of RNA samples from yeast that minimizes degradation by RNases and incorporates two purification steps: acid phenol extraction and binding to a silica matrix. The procedure requires no precipitation steps, facilitating automation, and can be completed in less than 90 min. The RNA quality is ideal for microarray analysis.     

Purification of circular YACs from yeast cells for DNA sequencing.

We describe a method for the purification of circular yeast artificial chromosome (YAC) DNA 120-150 kilobases (kb) in size that is of sufficient quantity and quality for restriction enzyme analysis and DNA sequencing. This method preferentially enriches for circular YAC DNA and avoids the time-consuming step of centrifugation in CsCl--ethidium bromide (EtBr) gradients. We applied this method to the purification of circular YACs carrying DNA segments that are extremely unstable in E. coli, including those that correspond to GAP2 and GAP3 on human chromosome 19. We showed that YAC DNA (GAP2 and GAP3) purified using this new method is clearly resolved in EtBr-stained gels. The sequence of YAC-GAP3 was obtained, representing the first GAP clone sequenced in YAC form. At present, it is estimated that there are more than 1000 gaps in the human genome that cannot be cloned using bacterial vectors. Thus, our new method may be very useful for completing the last stage of the human genome project.     

Recovery and potential utility of YACs as circular YACs/BACs

A method has been established to convert pYAC4-based linear yeast artificial chromosomes (YACs) into circular chromosomes that can also be propagated in Escherichia coli cells as bacterial artificial chromosomes (BACs). The circularization is based on use of a vector that contains a yeast dominant selectable marker (G418R), a BAC cassette and short targeting sequences adjacent to the edges of the insert in the pYAC4 vector. When it is introduced into yeast, the vector recombines with the YAC target sequences to form a circular molecule, retaining the insert but discarding most of the sequences of the YAC telomeric arms. YACs up to 670 kb can be efficiently circularized using this vector. Re-isolation of megabase-size YAC inserts as a set of overlapping circular YAC/BACs, based on the use of an Alu-containing targeting vector, is also described. We have shown that circular DNA molecules up to 250 kb can be efficiently and accurately transferred into E.coli cells by electroporation. Larger circular DNAs cannot be moved into bacterial cells, but can be purified away from linear yeast chromosomes. We propose that the described system for generation of circular YAC derivatives can facilitate sequencing as well as functional analysis of genomic regions.     

Selective isolation of genomic loci from complex genomes by transformation-associated recombination cloning in the yeast Saccharomyces cerevisiae

Here, we describe a protocol for the selective isolation of any genomic fragment or gene of interest up to 250 kb in size from complex genomes as a circular yeast artificial chromosome (YAC). The method is based on transformation-associated recombination (TAR) in the yeast Saccharomyces cerevisiae between genomic DNA and a linearized TAR cloning vector containing targeting sequences homologous to a region of interest. Recombination between the vector and homologous sequences in the co-transformed mammalian DNA results in the establishment of a YAC that is able to propagate, segregate and be selected for in yeast. Yield of gene-positive clones varies from 1% to 5%. The entire procedure takes 2 weeks to complete once the TAR vector is constructed and genomic DNA is prepared. The TAR cloning method has a broad application in functional and comparative genomics, long-range haplotyping and characterization of chromosomal rearrangements, including copy number variations.     

Recovery and potential utility of YACs as circular YACs/BACs

A method has been established to convert pYAC4-based linear yeast artificial chromosomes (YACs) into circular chromosomes that can also be propagated in Escherichia coli cells as bacterial artificial chromosomes (BACs). The circularization is based on use of a vector that contains a yeast dominant selectable marker (G418R), a BAC cassette and short targeting sequences adjacent to the edges of the insert in the pYAC4 vector. When it is introduced into yeast, the vector recombines with the YAC target sequences to form a circular molecule, retaining the insert but discarding most of the sequences of the YAC telomeric arms. YACs up to 670 kb can be efficiently circularized using this vector. Re-isolation of megabase-size YAC inserts as a set of overlapping circular YAC/BACs, based on the use of an Alu-containing targeting vector, is also described. We have shown that circular DNA molecules up to 250 kb can be efficiently and accurately transferred into E.coli cells by electroporation. Larger circular DNAs cannot be moved into bacterial cells, but can be purified away from linear yeast chromosomes. We propose that the described system for generation of circular YAC derivatives can facilitate sequencing as well as functional analysis of genomic regions.     

Extrachromosomal circular DNA derived from tandemly repeated genomic sequences in plants

Extrachromosomal circular DNA (eccDNA) is one characteristic of the plasticity of the eukaryotic genome. It was found in various non-plant organisms from yeast to humans. EccDNA is heterogeneous in size and contains sequences derived primarily from repetitive chromosomal DNA. Here, we report the occurrence of eccDNA in small and large genome plant species, as identified using two-dimensional gel electrophoresis. We show that eccDNA is readily detected in both Arabidopsis thaliana and Brachycome dichromosomatica , reflecting a normal phenomenon that occurs in wild-type plants. The size of plant eccDNA ranges from > 2 kb to < 20 kb, which is similar to the sizes found in other organisms. These DNA molecules correspond to 5S ribosomal DNA (rDNA), non-coding chromosomal high-copy tandem repeats and telomeric DNA of both species. Circular multimers of the repeating unit of 5S rDNA were identified in both species. In addition, similar multimers were also demonstrated with the B. dichromosomatica repetitive element Bdm29. Such circular multimers of tandem repeats were found in animal models, suggesting a common mechanism for eccDNA formation among eukaryotes. This mechanism may involve looping-out via intrachromosomal homologous recombination. The implications of these results on genome plasticity and evolutionary processes are discussed.     

Direct cloning of full-length mouse mitochondrial DNA using a Bacillus subtilis genome vector

The complete mouse mitochondrial genome (16.3 kb) was directly cloned into a Bacillus subtilis genome (BGM) vector. Two DNA segments of 2.06 and 2.14 kb that flank the internal 12 kb of the mitochondrial DNA (mtDNA) were subcloned into an Escherichia coli plasmid. Subsequent integration of the plasmid at the cloning locus of the BGM vector yielded a derivative specific for the targeted cloning of the internal 12-kb mtDNA region. The BGM vector took up mtDNA purified from mouse liver and integrated it by homologous recombination at the two preinstalled mtDNA-flanking sequences. The complete cloned mtDNA in the BGM vector was converted to a covalently closed circular (ccc) plasmid form via gene conversion in B. subtilis. The mtDNA carried on this plasmid was then isolated and transferred to E. coli. DNA sequence fidelity and stability through the BGM vector-mediated cloning process were confirmed.     

Supercoiled plasmid DNA: selective purification by thiophilic/aromatic adsorption

Separation of the different plasmid isoforms is a major challenge in purifying plasmid DNA. We describe a new type of biochemical interaction that occurs in the presence of high concentrations of lyotropic salt and results in the selective adsorption of supercoiled plasmid DNA to aromatic thioether ligands. Under well-defined conditions, these ligands are capable of separating supercoiled plasmid DNA (ccc) from its isoform, i.e. open circular (oc) form. Integrated in a process, preceded by group separation and followed by anion-exchange chromatography, this new purification method may facilitate the production of highly purified supercoiled plasmid DNA for use in gene therapy and DNA vaccine applications.     

Genomic replacement in Escherichia coli K-12 using covalently closed circular plasmid DNA

A number of gene replacements at different loci were constructed using covalently closed circular (ccc) plasmid DNA in the recB21 recC22 sbcB15 sbcC201 mutant of Escherichia coli (JC7623). Selected constructs representing deletions and insertion mutations formed from double-crossover events involving the ccc plasmid molecules and the genome were confirmed by Southern blots, and the frequency of double-crossover events was evaluated. It is reported that such mutants may be constructed without linearizing plasmid DNA, as described previously.     

An improved method for rapid purification of covalently closed circular plasmid DNA over a wide size range

An improved method has been developed for the large-scale purification of covalently closed circular (CCC) plasmid DNA molecules of sizes ranging from 4·3 to 73 kb. This protocol uses an alkaline-lysis procedure followed by acid-phenol extraction but with several modifications to previously reported methods. The principal modification is the replacement of NaCl by MgCl₂ in the extraction buffer to improve yield and to remove chromosomal and other non-CCC plasmid DNA. Plasmid DNA can be purified in less than 1 h and used successfully in restriction enzyme analysis and cloning experiments.     

Molecular cloning of Drosophila gamma-glutamylcysteine synthetase by functional complementation of a yeast mutant

gamma-Glutamylcysteine synthetase (GCS) catalyses a critical, rate-limiting step in glutathione synthesis. In this study we describe the isolation and characterisation of a GCS cDNA (pDmGCS4.3. 3) from Drosophila melanogaster by functional complementation of a Saccharomyces cerevisiae gsh1 mutant. Expression of pDmGCS4.3.3 in the yeast mutant partially restored glutathione levels and conferred resistance to methylglyoxal. The pDmGCS4.3.3 cDNA was found to be approx. 4.6 kb in length, containing a 2 kb fragment encoding an open reading frame with a high degree of deduced amino acid sequence identity with previously reported GCS sequences. In situ hybridisation revealed that the Drosophila GCS gene maps to 7D6-9 on the X chromosome.     

Characterization of a new class of circular DNA molecules in yeast

This paper describes the isolation of a pure population of covalently closed circular twisted DNA molecules from yeast. These molecules are homogeneous in size, that is consist of monomers of 2.2μ and of multiple length oligomers of n x 2.2μ. While no data rule out the mitochondrial origin of this DNA, its actual intracellular localization remains unknown; it displays the same buoyant density as the main nuclear DNA and therefore is not the heavy nuclear satellite DNA (γ-DNA described by Moustacchi and Williamson (1966)); although circular molecules represent only 1 to 5 % of the total DNA, they can be prepared in sizable and reproducible amounts by a method based on the use of mechanical disruption of yeast cells rather than lysis by snail gut juice.     

Rapid micropreps and minipreps of Ti plasmids and binary vectors fromAgrobacterium tumefaciens

A simple and versatile procedure has been developed for the isolation of both large helper/Ti plasmids and binary vectors fromAgrobacterium tumefaciens. Using a slightly modified alkaline lysis protocol, intact plasmid can be recovered from cultures grown in standard micro-centrifuge tubes or culture tubes in sufficient yield and purity to allow for restriction analysis on ethidium bromide stained gels of the >200 kb Ti plasmid DNA. Contamination by chromosomal DNA is minimal and there is thus no need for isopycnic gradient purification. This same procedure can be combined with a high temperature treatment (37°C) and antibiotic selection to generate preparations containing binary vector DNA that are virtually free of interfering Ti plasmid DNA. Restriction patterns produced from these binary vector DNA preparations are unambiguous and therefore preliminary screening by Southern hybridization can be eliminated.     

Facile recovery of individual high-molecular-weight, low-copy-number natural plasmids for genomic sequencing

Sequencing of the large (>50 kb), low-copy-number (<5 per cell) plasmids that mediate horizontal gene transfer has been hindered by the difficulty and expense of isolating DNA from individual plasmids of this class. We report here that a kit method previously devised for purification of bacterial artificial chromosomes (BACs) can be adapted for effective preparation of individual plasmids up to 220 kb from wild gram-negative and gram-positive bacteria. Individual plasmid DNA recovered from less than 10 ml of Escherichia coli, Staphylococcus, and Corynebacterium cultures was of sufficient quantity and quality for construction of high-coverage libraries, as shown by sequencing five native plasmids ranging in size from 30 kb to 94 kb. We also report recommendations for vector screening to optimize plasmid sequence assembly, preliminary annotation of novel plasmid genomes, and insights on mobile genetic element biology derived from these sequences. Adaptation of this BAC method for large plasmid isolation removes one major technical hurdle to expanding our knowledge of the natural plasmid gene pool.     

Retrofitting YACs for direct DNA transfer into plant cells

The utility of plant YAC libraries prepared in conventional YAC vectors would be dramatically increased if these YACs could be used directly for plant transformation. A pair of vectors that allow clones from YAC libraries to be modified (retrofitted) for plant transformation by direct DNA transfer methods, such as particle bombardment or electroporation, has been developed. Modification of the YAC is achieved in two sequential yeast transformation steps by taking advantage of the homologous recombination system in yeast. Using this approach, two plant-selectable marker genes and DNA sequence elements required for copy number amplification in yeast can be introduced into YACs present in yeast strain AB1380. The utility of these vectors is demonstrated by retrofitting YACs that contain inserts ranging in size from 80 to 700 kb. The 6- to 12-fold increase in copy number of these modified YACs facilitates the isolation of YAC DNA for direct DNA transformation methods. Retrofitted YACs were used for particle bombardment to examine the efficiency with which their large DNA inserts are transferred into plant cells. The availability of these retrofitting vectors should facilitate the transfer of YAC DNA inserts into plant cells and thus help bridge the gap between existing mapping techniques and plant transformation procedures.     

Animal-free production of ccc-supercoiled plasmids for research and clinical applications

The topological structure of plasmid DNA can be characterized by capillary gel electrophoresis (CGE analysis)-an important tool for quality control and stability assessments in DNA storage or application. Hence, a large-scale manufacturing process was developed that allows the removal of undesired open circular (oc) or linear plasmid topologies, bacterial genomic DNA, RNA, proteins as well as lipopolysaccharides (endotoxins) and results in obtaining supercoiled (covalently closed circular, ccc) plasmid DNA in a pure form without using any animal-derived substances. Using CGE, the development and in-line monitoring for pharmaceutical plasmid production starting from fermentation control throughout the whole manufacturing process including the formulated and filled product can be performed the first time in a way conforming to good manufacturing practices (GMP). Plasmid stability data were obtained from analysis of shear effects influencing the plasmid quality in DNA drug delivery formulation and application (e.g. gene gun or jet injection). The physical stability of plasmid DNA is for the first time evaluated in DNA storage experiments on the level of different plasmid forms.