Ultra-Uniform Field Distribution in a Finite-Width Metal–Dielectric–Metal Waveguide

We investigate the propagation characteristics of the fundamental surface plasmon polariton (SPP) mode of a finite-width metal–dielectric–metal waveguide. By changing the refractive index or the thickness of the dielectric layer of the waveguide, the SPP mode can be transformed from a mode confined in the dielectric layer into a mode confined around the metal corners. There always exists a condition at which the mode field distribution in the dielectric layer becomes almost perfectly uniform along the direction parallel to the metal layers, and this condition is insensitive to the width of the waveguide. It is also possible to obtain an ultra-uniform field distribution by controlling the refractive index of a different dielectric placed on both sides of the waveguide. The waveguide can be used as a basic structure for the realization of nanosized photonic devices and sensors.     

Five-Band Terahertz Perfect Absorber Based on Metal Layer–Coupled Dielectric Metamaterial

Plasmonics - A five-band tunable ideal terahertz metamaterial absorber based on subwavelength range is proposed. It consists of a reflective layer, a dielectric layer, and an absorbing layer...     

A High-Performance Refractive Index Sensor Based on Hybrid Resonance Modes in a Square Nanocavity Coupled with Metal–Insulator–Metal Plasmonic Waveguide

Plasmonics - We present one of the simplest nanoscale systems for a high-performance refractive index (RI) sensor. We investigate analytically and numerically the transmission response of the...     

Plasmonic Photonic Bloch Oscillations in Composite Metal–Insulator–Metal Waveguide Structure

This study proposes the time-evolved plasmonic photonic Bloch oscillations (PBOs) in a composite metal–insulator–metal (CMIM) waveguide structure. This device contains two kinds of MIM waveguide with different thickness of the insulator gaps. The time-resolved plasmonic PBO motion in this CMIM waveguide can be observed by introducing a linearly graded dielectric material. The ray trajectory results from the Hamiltonian optics are consistent with the finite-difference time-domain simulation results.     

Fano Resonance in a Gear-Shaped Nanocavity of the Metal–Insulator–Metal Waveguide

The filter function of the metal–insulator–metal (MIM) waveguide with a gear-shaped nanocavity is investigated using the finite-difference time-domain method. Since the gear breaks the symmetric distribution of the resonance, Fano resonance occurs in the gear-shaped nanocavity. Fano resonance strongly depends on the structural parameters of the gear. Compared to the MIM waveguide with a disk-shaped nanocavity, the MIM waveguide with a gear-shaped nanocavity allows for a much more sensitive detection of small refractive index changes of the filled media inside the nanocavity, which reveals a potential sensor application of the MIM waveguide with a gear-shaped nanocavity.     

Numerical Investigation on Elliptic Cylindrical Nanowire Hybrid Plasmonic Waveguide–Based Polarization Beam Splitter

A novel design of elliptic cylindrical nanowire hybrid plasmonic waveguide (ECNHPW)–based polarization beam splitter (PBS) is proposed. In the proposed design, the ECNHPW arm acts as an input port and a bar port; on the other hand, a regular silicon wire (RSW) arm acts as a cross port. By selecting the physical parameters of the proposed PBS accurately, the transverse electric (TE) mode is merely satisfied with the phase-matching condition. In contrast, the transverse magnetic (TM) mode does not propagate to the RSW arm. Consequently, the TM input mode goes directly to the ECNHPW arm, while the TE input mode in ECNHPW is coupled with RSW arm. As a result, the two different polarization modes are meritoriously separated, and they pass through two different arms. For the proposed PBS, the insertion loss (IL) of both polarizations lies below 1 dB. For TE input, the value of the polarization extinction ratio (PER) is 27.2 dB, and for TM input, it is 23.9 dB at 1550 nm operating wavelength. Further optimization is implemented by varying the wavelength, thickness of SiO₂, and the gap between the waveguides using the finite element method (FEM). The proposed PBS is designed with 150 nm bandwidth, high PER, and low IL, which can be suitable for photonic integrated circuits (PICs).

     

Design of a High-Resolution Metal–Insulator–Metal Plasmonic Refractive Index Sensor Based on a Ring-Shaped Si Resonator

In this paper, a high-resolution refractive index sensor is proposed based on a novel metal–insulator–metal plasmonic topology. The structure is based on a Si nano-ring located inside a circular cavity. It acts as an optical notch filter with a quality factor equal to 269. The proposed filter topology is numerically simulated using the finite difference time domain method. It is shown that the proposed filter can also act as a refractive index sensor with a sensitivity of 636 nm/RIU and a fairly high figure of merit (FoM) equal to 211.3 RIU⁻¹. It is shown that the sensor can easily detect a refractive index change of ± 0.001 for dielectrics whose refractive index is between 1 and 1.2. For the refractive index range of 1.33 to 1.52, the maximum FoM of the sensor is 191 RIU⁻¹. The simplicity of the design and its high resolution are the two main features of the proposed sensor which make it a good candidate for biomedical applications.

     

Multiple Surface Plasmon Resonances in a Metal–Insulator–Metal Structure Assembled Via Silver–Copper Nanoparticle Arrays

The Ag–Cu nanoparticle arrays, prepared using the electrochemical deposition method, were assembled into the metal–insulator–metal (MIM) structure with polyvinyl alcohol acting as insulating layer, the transmission spectrum of the MIM structure was observed to support the multiple surface plasmon resonances in the wavelength range 1,000 to 2,600 nm. The multiple peaks were formed due to the superposition and coupling of the surface plasmon resonance of nanoparticles with various sizes in the metal layers. The newly found MIM structure in which multiple resonances exist has a potential application in multiband-pass filters and optical magnetic metamaterials at the resonance wavelength.     

Localized Surface Plasmon Resonance and Refractive Index Sensitivity of Metal–Dielectric–Metal Multilayered Nanostructures

The localized surface plasmon resonances of multilayered nanostructures are studied using finite difference time domain simulations and plasmon hybridization method. Concentric metal–dielectric–metal (MDM) structure with metal core and nanoshell separated by a thin dielectric layer exhibits a strong coupling between the core and nanoshell plasmon resonance modes. The coupled resonance mode wavelengths show dependence on the dielectric layer thickness and composition of core and outer layer metal. The aluminum-based MDM structures show lower plasmon wavelength compared with Ag- and Au-based MDM nanostructures. The calculated refractive index sensitivity (RIS) factor is in the order Ag–Air–Ag>Au–Air–Au>Al–Air–Al for monometallic multilayered nanostructures. Bimetallic multilayered nanostructures support strong and tunable plasmon resonance wavelengths as well as high RIS factor of 510 nm/refractive index unit (RIU) and 470 nm/RIU for Al–Air–Au and Ag-Air-Au, respectively. The MDM structures not only exhibit higher index sensitivity but also cover a wide ultraviolet–near-infrared wavelengths, making these structures very promising for index sensing, biomolecule sensing, and surface-enhanced Raman spectroscopy.     

Comprehensive Study of Phase-Sensitive SPR Sensor Based on Metal–ITO Hybrid Multilayer

Plasmonics - Surface plasmon resonance (SPR) biosensor is widely used for its high precision and real-time analysis. In this paper, SPR biosensor based on the hybrid structure of metal–indium...     

Characteristics of Symmetric Surface Plasmon Polariton Mode in Glass–Metal–Glass Waveguide

The propagation characteristics of symmetric surface plasmon polariton mode in a glass–metal–glass waveguide are presented. Gallium lanthanum sulfide has been taken as the glass and silver (Ag) has been used as the metal. The analysis has been done both numerically and analytically. A two-dimensional finite-difference time-domain-based simulation model has been developed in order to analyze the propagation characteristics numerically. The obtained results using numerical and analytical methods have been compared and a very good agreement has been found.     

Characteristics of Quantum Plasmonic Waves Guided by a Symmetric Metal–Gap–Dielectric Nano-system

Plasmonics - The guiding properties of a symmetric conductor–gap–dielectric system consists of a metal film symmetrically surrounded by media of two dielectrics, and is theoretically...     

Location-Dependent Local Field Enhancement Along the Surface of the Metal–Dielectric Core–Shell Nanostructure

A theoretical study based on quasi-static approximation is performed to investigate the location-dependent local field enhancement around the dielectric shell-coated gold nanosphere. Our calculation results show that the local field distribution near a gold nanoparticle can be altered greatly by coating with a dielectric shell. Because of the polarizability of the dielectric shell, increasing azimuth angle along the inner surface leads to the increase of the local field, which is opposite to that of the outer surface. Furthermore, the location-dependent local field enhancement and resonance frequency at both the inner and outer surfaces can also be modulated by varying the shell thickness and shell dielectric constant. These calculation results about the location-dependent local field enhancement show the potential of dielectric-coated metallic nanostructure for single-molecule detection based on surface-enhanced Raman scattering and surface enhanced fluorescence.     

Buried Effects of Surface Plasmon Resonance Modes for Periodic Metal–Dielectric Nanostructures Consisting of Coupled Spherical Metal Nanoparticles with Cylindrical Pore Filled with a Dielectric

We numerically investigate the buried effects of surface plasmon resonance (SPR) modes for the periodic silver-shell nanopearl dimer (PSSND) array and their solid counterparts with different buried depths in a silica substrate by means of finite element method with three-dimensional calculations. The investigated PSSND array is an important novel geometry for plasmonic metal nanoparticles (MNPs), combining the highly attractive nanoscale optical properties of both metallic nanoshell and cylindrical pore filled with a dielectric. Numerical results for SPR modes corresponding to the effects of different illumination wavelengths, absorption spectra, pore–dielectric, electric field components and total field distribution, charge density distribution, and the model of the induced local field or an applied field of the PSSND array are reported as well. It can be found that the buried MNPs with cylindrical pore filled with a dielectric in a substrate exhibit tunable SPR modes corresponding to the bonding and antibonding modes that are not observed for their solid counterparts.     

Tunable Plasmon–Induced Transparency Based on Dirac Semimetals

Numerical and theoretical studies were conducted on the plasmon induced transparency (PIT) of the symmetrical structure of Dirac semi-metal films (DSFS). The films have a parallel strip and split resonant ring structure. After analysing the surface current intensity and distribution, it was found that the electromagnetically induced transparency is as a result of destructive interference between these two structures, with the amplitude modulation depth of the frequency of the transmission window reaching as high as 99.09%. Moreover, by adjusting the Fermi level of the DSFS, the Fermi level changed from 50 to 90 meV, and the transmission window blue-shifted from 0.529 to 0.799 THz. The transmission peak frequency was found to have a linear relationship with the Fermi level. Similarly, the transmission phase and group delay under different Fermi levels was investigated. The positive group delay of the film reaches 7.026 ps, which provides a direction for new applications of terahertz, such as optical storage and slow optical devices.

     

Medical Materials Based on Chitosan Succinamide–Glycerol Systems

The conditions to obtain materials with elastic-viscous properties based on chitosan succinamide have been studied. A decreased polymer content and a transition from visco-elastic liquids to elastic-viscous systems were shown upon the addition of glycerol to an aqueous solution of chitosan succinamide. The systemic response, biological compatibility, and dynamics of bioresorbability of the obtained materials were studied during implantation in laboratory animals.