用吸附-交联法在磁性胶体粒子上固载中性蛋白酶

利用吸附-交联法,在磁性胶体粒子表面固载 ASl.398 中性蛋白酶,可以制备出活性达 2500U/g 的磁性固定化中性蛋白酶.该固定化酶具有较好的耐热性和操作稳定性,最适作用 pH6.0—6.5,最适作用温度60℃.考察了交联剂用量、温度、pH及酶与载体比例对 AS1.398 中性蛋白酶固定化的影响.     

N-琥珀酰壳聚糖固定化中性蛋白酶的制备及性质研究

以N-琥珀酰壳聚糖为载体固定中性蛋白酶,研究了固定化酶的适宜温度、pH、热稳定性和酸碱稳定性等酶学性质,同时对固定化酶和游离酶的红外光谱图作了分析比较.结果表明:中性蛋白酶经固定化后,最适酶反应pH由7升至8,最适温度没有改变,仍为50℃,所得固定化酶具有较宽的酸碱稳定性范围,在pH 7～9都保持较高活力,并且同定化酶的热稳定性比游离酶有较大的提高.红外光谱分析表明,酶固定化前后的红外光谱图的部分特征峰有较大的差异.     

AS1.398中性蛋白酶的固定化研究

本文对枯草杆菌AS1.398中性蛋白酶的固定化进行了研究。考查了温度,pH值、交联剂用量,以及载体与酶的比例等因素对AS1.398中性蛋白酶固定化的影响;确定了固定化AS1.398中性蛋白酶的一些催化特性:最适温度60℃,最适pH值8.0,操作半衰期88天。固定化AS1.398中性蛋白酶活性回收为74％。     

米曲霉F-81产中性蛋白酶的固定化条件及其特性

以海藻酸钠为载体,戊二醛为交联剂固定化米曲霉F-81产中性蛋白酶,研究了固定化条件及固定化酶的性质。结果表明,固定化的最佳条件为:固定化时间1 h、海澡酸钠浓度4%、戊二醛浓度9%、CaCl2浓度0.7 mol/L。在此条件下固定化的中性蛋白酶活力为游离酶活力的68%。固定化酶的最适作用温度为65℃,最适作用pH值为7.0。60℃下酶稳定性较好,80℃下处理60 min,粗酶中几乎检测不到酶活力;中性蛋白酶pH稳定范围为6.5-9.5。Km值为24.83 mg/mL,最大反应速率Vmax为0.043 12 mg/min。     

介孔分子筛MCM-41固定中性脂肪酶条件的研究

以介孔分子筛MCM-41材料为载体,采用物理吸附法对中性脂肪酶进行了固定化处理,并研究不同条件对固定化脂肪酶催化活性的影响,从而得到该种材料对脂肪酶的最佳固定化条件。给酶量为45960 U/g,固定化温度为45℃,pH值为7.5,时间为3 h,此时固定化酶的活力约为4666 U/g。固定化酶和游离酶的最适反应温度都为40℃,最适pH值为7.5,比游离酶低。固定化酶温度稳定性和pH稳定性较游离酶有所提高。     

磁性聚乙二醇载体固定化葡萄糖淀粉酶的研究

以磁性聚乙二醇为载体,通过吸附-交联法固定化糖化酶.研究了戊二醛浓度、pH值及加酶量对酶固定化的影响.并对固定化酶的最适温度、最适pH、米氏常数、热稳定性及操作稳定性等进行了探讨.     

金属螯合载体定向固定化木瓜蛋白酶的研究

以磁性金属螯合琼脂糖微球为载体,利用金属螯合配体（IDACu²⁺）与蛋白质表面供电子氨基酸相互作用的原理,定向固定了木瓜蛋白酶。固定化最适条件为Cu²⁺1.5×10^-2mol/g载体、固定化时间4h、固定化pH7.0、给酶量30mg/g载体。固定化酶的最适反应温度70℃、最适反应pH8.0,固定化酶的热稳定性明显高于溶液酶,固定化酶活力回收为68.4％,且有较好的操作稳定性,载体重复使用5次后固定化酶酶活为首次固定化酶79.71%。     

磁性Fe_3O_4/聚苯胺纳米纤维的制备及其固定漆酶研究

合成优良的漆酶固定化载体有利于其进一步应用。通过将磁性纳米颗粒包埋在苯胺的聚合物中形成磁性Fe_3O_4/聚苯胺纳米纤维,作为漆酶固定化载体。透射电镜和红外图谱分别显示了载体的形态结构特征。不同比例的Fe_3O_4与苯胺对载体结构没有明显影响,但会影响酶的负载量。合成载体最大酶负载量为210 mg/g,固定漆酶后的载体导电性能发生变化。固定化漆酶最适pH从4偏移到3.5,在酸性pH范围保持较高的酶活性,最适温度为60℃;在50℃下孵育240 min,能保持约50%的酶活性,于4℃下保存30 d能保持约60%的酶活性;重复使用8次后还能保留70%的酶活性;结果证实了磁性Fe_3O_4/聚苯胺纳米纤维成功合成,对酶有较高的负载量。随着Fe_3O_4的比例增加,载体对漆酶的负载量却减少;漆酶与载体间存在有一定电子交流。固定化漆酶的最适pH向酸性偏移可能和聚苯胺的导电性有关,合成载体显示出良好的热稳定性、储存稳定性和重复使用稳定性,表明磁性Fe_3O_4/聚苯胺纳米纤维是一种优良的酶固定化载体,可以实现酶的高效固定化。     

壳聚糖纳米磁性微球固定脂肪氧合酶的研究

实验采用溶胶凝胶法制备了纳米磁性Fe3O4,并用壳聚糖对颗粒2四川大学,生命科学学院,四川成都表面进行了表面修饰得到壳聚糖纳米磁性微球复合载体,再以戊二醛为交联剂将脂肪氧合酶固定在复合载体上,并测定了不同因素对游离酶和固定化酶活性的影响;实验表明,微粒在电镜观察下呈亮黑色球状,直径约为150nm,并具有良好的磁性,固定在载体上酶的含量约为7.6%,游离酶的最适温度为30℃,最适p H8.0,而固定化酶的最适温度为30℃,最适p H9.0,当H2O2浓度为12.0 g/L时,游离酶和固定化酶的活性最强;实验结果表明通过交联的方法成功将脂肪氧合酶固定在了纳米磁性四氧化三铁颗粒上,并表现出了较好的活性。     

具有磁响应性的聚乙二醇载体固定化糖化酶的研究

以两亲性的聚乙二醇胶体粒子,通过吸附－交联法固定化糖化酶。研究了戊二醛浓度,缓冲液ｐＨ值及加酶量对酶固定化的影响,固定化酶活力可达１７０９５Ｕｐｅｒｇｒａｍ干胶,活力回收为６３％。磁性固定化酶最适温度比天然酶提高５℃,最适ｐＨ比天然酶提高０５个ｐＨ单位。并且对酸、碱、热的稳定性大大增强,贮存及操作稳定性也大大提高。该磁性载体合成简单,固定化方法简便,具有磁性,易于分离,因而为工业上的应用提供了一种新的可能。     

Large-scale separation of magnetic bioaffinity adsorbents

Flat magnetic separator was used to separate magnetic bioaffinity adsorbents from litre volumes of suspensions. Both magnetic cross-linked erythrocytes and magnetic chitosan were efficiently separated; at least 95% adsorbent recovery was achieved at maximum flow rate (1680 ml min^–1). Using this system low amounts of trypsin were concentrated from large sample volumes using magnetic erythrocytes as affinity adsorbent.     

磁分离仪分离磁性细菌的新方法

磁性细菌胞内可以产生磁性颗粒,因此具有趋磁性,基于这种特性,利用磁分离的原理,本研究开发了一种磁性细菌分离仪,提供了一种分离磁性细菌的新方法。以氧化亚铁硫杆菌为例,使用磁性细菌分离仪进行分离,可以得到强磁菌和弱磁菌。利用透射电镜观察,强磁菌胞内磁性颗粒明显多于弱磁菌;半固体平板磁泳实验也表明强磁菌趋磁性明显强于弱磁菌。各项实验结果表明磁性细菌分离仪可以有效地分离磁性细菌,这是一种分离磁性细菌的新方法,将促进磁性细菌分离培养的研究。     

Magnetic nanoparticles for multi-imaging and drug delivery

Various bio-medical applications of magnetic nanoparticles have been explored during the past few decades. As tools that hold great potential for advancing biological sciences, magnetic nanoparticles have been used as platform materials for enhanced magnetic resonance imaging (MRI) agents, biological separation and magnetic drug delivery systems, and magnetic hyperthermia treatment. Furthermore, approaches that integrate various imaging and bioactive moieties have been used in the design of multi-modality systems, which possess synergistically enhanced properties such as better imaging resolution and sensitivity, molecular recognition capabilities, stimulus responsive drug delivery with on-demand control, and spatio-temporally controlled cell signal activation. Below, recent studies that focus on the design and synthesis of multi-mode magnetic nanoparticles will be briefly reviewed and their potential applications in the imaging and therapy areas will be also discussed.     

Effect of static magnetic fields on the budding of yeast cells

The effect of static magnetic fields on the budding of single yeast cells was investigated using a magnetic circuit that was capable of generating a strong magnetic field (2.93 T) and gradient (6100 T² m^?1). Saccharomyces cerevisiae yeast cells were grown in an aqueous YPD agar in a silica capillary under either a homogeneous or inhomogeneous static magnetic field. Although the size of budding yeast cells was only slightly affected by the magnetic fields after 4 h, the budding angle was clearly affected by the direction of the homogeneous and inhomogeneous magnetic fields. In the homogeneous magnetic field, the budding direction of daughter yeast cells was mainly oriented in the direction of magnetic field B. However, when subjected to the inhomogeneous magnetic field, the daughter yeast cells tended to bud along the axis of capillary flow in regions where the magnetic gradient, estimated by B(dB/dx), were high. Based on the present experimental results, the possible mechanism for the magnetic effect on the budding direction of daughter yeast cells is theoretically discussed. Bioelectromagnetics 31:622–629, 2010. © 2010 Wiley‐Liss, Inc.     

Magnetically modified microalgae and their applications

The majority of algal cells can interact with a wide range of nano- and microparticles. Upon interaction the modified cells usually maintain their viability and the presence of foreign material on their surfaces or in protoplasm can provide additional functionalities. Magnetic modification and labeling of microalgal biomass ensures a wide spectrum of biotechnological, bioanalytical and environmental applications. Different aspects of microalgal cell magnetic modification are covered in the review, followed by successful applications of magnetic algae. Modified cells can be employed during their harvesting and removal, applied in toxicity microscreening devices and also as efficient adsorbents of different types of xenobiotics.     

磁性微球的制备及在生物分离应用中的研究进展

磁性微球是一类新型的功能材料,在生物医学工程、细胞生物学和环境工程具有广泛的应用。本文从磁性微球的结构、特性和制备方法进行了探讨,并详细介绍了磁性微球在细胞分离、蛋白质以及核酸的制备纯化领域中的应用。     

磁性微球的制备及在生物分离应用中的研究进展

磁性微球是一类新型的功能材料,雀生物医学工程、细胞生物学和环境工程具有广泛的应用。本文从磁性微球的结构、特性和制备方法进行了探讨,并详细介绍了磁性微球在细胞分离、蛋白质以及核酸的制备纯化领域中的应用。     

Separation of magnetic affinity biopolymer adsorbents in a Davis tube magnetic separator

A Davis tube (a matrix-free, flow-through magnetic separator used mainly in mineral processing) has been tested for separation of magnetic affinity biopolymer adsorbents from larger volumes of suspensions. Both magnetic chitosan and magnetic cross-linked erythrocytes could be efficiently separated from litre volumes of suspensions. Up to 90% adsorbent recovery was achieved under optimised separation conditions.     

磁性纳米材料的生物医学应用进展

以四氧化三铁为代表的医用磁性纳米材料具有独特的磁学性能、表面易功能化、良好的生物学相容性等特点,在纳米医学相关领域展现出巨大的应用前景,特别是近年来它作为可介导外场的智能材料,在材料设计和生物医学应用方面均取得了突破性的进展.鉴于此,本文围绕磁性氧化铁纳米材料的生物医学应用,着重介绍近年来其在磁共振影像探针、磁热和磁力效应的生物医学应用、诊疗一体化以及纳米酶催化等领域的研究进展,并对磁性纳米材料在生物医学领域未来的发展方向进行了展望.