Immobilization of beta-galactosidase on fibrous matrix by polyethyleneimine for production of galacto-oligosaccharides from lactose

The production of galacto-oligosaccharides (GOS) from lactose by Aspergillus oryzae beta-galactosidase immobilized on cotton cloth was studied. A novel method of enzyme immobilization involving PEI-enzyme aggregate formation and growth of aggregates on individual fibrils of cotton cloth leading to multilayer immobilization of the enzyme was developed. A large amount of enzyme was immobilized (250 mg/g support) with about 90-95% efficiency. A maximum GOS production of 25-26% (w/w) was achieved at near 50% lactose conversion from 400 g/L of lactose at pH 4.5 and 40 degrees C. Tri- and tetrasaccharides were the major types of GOS formed, accounting for about 70% and 25% of the total GOS produced in the reactions, respectively. Temperature and pH affected not only the reaction rate but also GOS yield to some extend. A reaction pH of 6.0 increased GOS yield by as much as 10% compared with that of pH 4.5 while decreased the reaction rate of immobilized enzyme. The cotton cloth as the support matrix for enzyme immobilization did not affect the GOS formation characteristics of the enzyme under the same reaction conditions, suggesting diffusion limitation was negligible in the packed bed reactor and the enzyme carrier. Increase in the thermal stability of PEI-immobilized enzyme was also observed. The half-life for the immobilized enzyme on cotton cloth was close to 1 year at 40 degrees C and 21 days at 50 degrees C. Stable, continuous operation in a plug-flow reactor was demonstrated for about 3 days without any apparent problem. A maximum GOS production of 26% (w/w) of total sugars was attained at 50% lactose conversion with a feed containing 400 g/L of lactose at pH 4.5 and 40 degrees C. The corresponding reactor productivity was 6 kg/L/h, which is several-hundred-fold higher than those previously reported.     

Immobilization of cyclodextrin glucanotransferase on amberlite IRA-900 for biosynthesis of transglycosylated xylitol

Cyclodextrin glucanotransferase (CGTase) fromThermoanaerobacter sp. was adsorbed on the ion exchange resin Amberlite IRA-900. The optimum conditions for the immobilization of the CGTase were pH 6.0 and 600 U CGTase/g resin, and the maximum yield of immobilization was around 63% on the basis of the amount ratio of the adsorbed enzyme to the initial amount in the solution. Immobilization of CGTase shifted the optimum temperature for the enzyme to produce transglycosylated xylitol from 70°C to 90°C and improved the thermal stability of immobilized CGTase, especially after the addition of soluble starch and calcium ions. Transglycosylated xylitol was continuously produced using immobilized CGTase in the column type packed bed reactor, and the operating conditions for maximum yield were 10% (w/v) dextrin (13 of the dextrose equivalent) as the glycosyl donor, 10% (w/v) xylitol as the glycosyl acceptor, 20 mL/h of medium flow rate, and 60°C. The maximum yield of transglycosylated xylitol and productivity were 25% and 7.82 g·L⁻¹·h⁻¹, respectively. The half-life of the immobilized CGTase in a column type packed bed reactor was longer than 30 days.     

Evaluation of half-life of immobilized enzyme during continuous reaction in bioreactors: A theoretical study

A theoretical study has been carried out on the evaluation of the apparent half-life of immobilized enzyme activity during continuous reaction both in a plug-flow reactor (PFR) and in a continuous-flow stirred-tank reactor (CSTR). Two apparent half-lives have been defined: the elapsed time at which the feedrate becomes half of the initial one when the feedrate of the substrate solution is lowered to keep the conversion fixed (constant-conversion policy), and the elapsed time at which the conversion becomes half of the initial one when the feedrate (or space velocity) is kept constant (constant-feedrate policy or constant-space-velocity policy). Under no intraparticle diffusional limitation, the constant-conversion policy of operation in the PFR and CSTR gives the same half-life as that of the enzyme inactivation regardless of the formula of the reaction rate, and the constant-feedrate policy of operation in the PFR and CSTR offers the same half-life as that of the enzyme inactivation only when the reaction is zero-order. Under intra-particle diffusional limitation, apparent half-lives are always greater than that of enzyme denaturation, depending on many factors such as order of reaction, feeding policy (constant-conversion and constant-feedrate policies), initial conversion, and bioreactor configuration. It is suggested to perform the continuous operation with changing feedrate to keep the conversion (or outlet substrate concentration) fixed under the domain of zero-order kinetics so as to obtain an apparent half-life as close to the real one in industrial operation.     

Integration of purification with immobilization of Candida rugosa lipase for kinetic resolution of racemic ketoprofen

The two processes for the partial purification and for the immobilization of a crude lipase preparation (Candida rugosa Lipase OF) have been successfully integrated into one by simple adsorption of the enzyme onto a cation ion exchanger resin (SP-Sephadex C-50) at pH 3.5. Due to selective removal of the unfavorable lipase isoenzyme (L1), the enzyme components (mainly L2 and L3) that are tightly fixed on the resin displayed a significantly improved enantioselectivity (E value: 50 versus 13 with addition of Tween-80) in the biocatalytic hydrolysis of 2-chloroethyl ester of rac-ketoprofen. The activity yields of the immobilized lipase were 48 and 70%, respectively when emulsified and non-emulsified substrates were employed for enzyme assay. Moreover, the concentration of Tween-80 was found to be a factor affecting the lipase enantioselectivity. By using such an immobilized enzyme as biocatalyst, the process for preparing enantiopure (S)-ketoprofen becomes simpler and more practical as compared with the previously reported procedures and the product was obtained with >94% ee at 22.3% conversion in the presence of an optimal concentration (0.5 mg/ml) of Tween-80 at pH 3.5. Furthermore, the operational stability of the immobilized biocatalyst was examined in different types of reactors. In an air-bubbled column reactor, the productivity was much higher than that in a packed-bed column reactor, in spite of a slightly lower stability. Under optimal conditions, the air-bubbled column reactor could be operated smoothly for at least 350 h, remaining nearly 50% activity.     

Continuous ethanol production from pineapple cannery waste using immobilized yeast cells

The cells of Saccharomyces cerevisiae ATCC 24553, were immobilized in k-carrageenan and packed in a tapered glass column reactor for ethanol production from pineapple cannery waste at temperature 30 degrees C and pH 4.5. The maximum productivity was 42.8 g ethanol 1(-1) h(-1) at a dilution rate of 1.5 h(-1). The volumetric ethanol productivity of the immobilized cells was ca. 11.5 times higher than the free cells. The immobilized cell reactor was operated over a period of 87 days at a dilution rate of 1.0 h(-1), without any loss in the immobilized cell activity. The maximum specific ethanol productivity and specific sugar uptake rate of the immobilized cells were 1.2 g ethanol g(-1) dry wt. cell h(-1) and 2.6 g sugar g(-1) dry wt. cell h(-1), respectively, at a dilution rate of 1.5 h(-1).     

An immobilized cell reactor with simultaneous product separation. II. Experimental reactor performance

The simultaneous separation of volatile fermentation products from product-inhibited fermentations can greatly increase the productivity of a bioreactor by reducing the product concentration in the bioreactor, as well as concentrating the product in an output stream free of cells, substrate, or other feed impurities. The Immobilized Cell Reactor-Separator (ICRS) consists of two column reactors: a cocurrent gas-liquid "enricher" followed by a countercurrent "stripper" The columns are four-phase tubular reactors consisting of (1) an inert gas phase, (2) the liquid fermentation broth, (3) the solid column internal packing, and (4) the immobilized biological catalyst or cells. The application of the ICRS to the ethanol-from-whey-lactose fermentation system has been investigated. Operation in the liquid continuous or bubble flow regime allows a high liquid holdup in the reactor and consequent long and controllable liquid residence time but results in a high gas phase pressure drop over the length of the reactor and low gas flow rates. Operation in the gas continuous regime gives high gas flow rates and low pressure drop but also results in short liquid residence time and incomplete column wetting at low liquid loading rates using conventional gas-liquid column packings. Using cells absorbed to conventional ceramic column packing (0.25-in. Intalox saddles), it was found that a good reaction could be obtained in the liquid continuous mode, but little separation, while in the gas continuous mode there was little reaction but good separation. Using cells sorbed to an absorbant matrix allowed operation in the gas continuous regime with a liquid holdup of up to 30% of the total reactor volume. Good reaction rates and product separation were obtained using this matrix. High reaction rates were obtained due to high density cell loading in the reactor. A dry cell density of up to 92 g/L reactor was obtained in the enricher. The enricher ethanol productivity ranged from 50 to 160 g/L h while the stripper productivity varied from 0 to 32 g/L h at different feed rates and concentrations. A separation efficiency of as high as 98% was obtained from the system.     

Hydrolysis of inulin from Jerusalem artichoke by inulinase immobilized on aminoethylcellulose

Purified inulinase (inulase, 2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7) of Kluyveromyces fragilis has been immobilized on 2-aminoethyl-cellulose by treatment with 2% glutaraldehyde in 0.05 m phosphate buffer, pH 7.0, for 2 h at room temperature. The immobilized enzyme preparation had 39.3 units inulinase activity per gram dried matrix, with 53.4% recovery yield of activity, and showed good operational stability in the presence of substrate, inulin or the tuber extract of Jerusalem artichoke. Optimum pH and temperature were 5.5 and 45°C, respectively. In a batch reactor, the conversion was 90% ($\text{d}\text{-fructose/}\text{d}\text{-glucose}\text{= 76/24}$) and 34 mg d-fructose per ml was produced from the artichoke tuber extract by the immobilized inulinase in 20 h. In column reactor packed with 28 ml immobilized enzyme, the following conditions were found to be optimal: height/diameter ratio of column, 10.3; space time, 3.8 h; temperature, 40°C. Operation under these conditions gave 90% conversion of a 7% inulin solution and the productivity was 102 mmol l^?1 h^?1.     

Enzymatic modification of vegetable protein: Immobilization of Penicillium duponti enzyme on reconstituted collagen and the use of the immobilized-enzyme complex for solubilizing vegetable protein in a recycle reactor

Penicillium duponti enzyme was immobilized on reconstituted collagen by macromolecular complication, impregnation, and covalent crosslinking techniques. The immobilization of the enzyme on collagen has a twofold purpose: (1) providing a protein microenvironment for the proteolytic enzyme; and (2) extending the useful life the enzyme once immobilized on the collagen matrix. Two types of collagen were used, one produced by the United States Department of Agriculture and the other produced by FMC. The USDA collagen contained unhydrolyzed telepeptide linkages and required pretreatment to reduce collagenaselike activity of the enzyme. Activity analysis of the immobilized enzyme complex showed that membranes with enzyme loading less than 10 mg enzyme/g of wet membrane in the reactor were dimensionally stable. The degree of crosslinking was an important parameter. Membranes with structural opening up to three times the initial dry thickness were found to be the maximum limit for controlled release of enzyme from the collagen membrane during enzymatic reaction. Higher activities and better stability of the enzyme in collagen membrane were found for covalent crosslinking of the enzyme to treated collagen films. The hydrolysis of soybean vegetable protein with the immobilized enzyme in a recycle reactor at enzyme loading of mg/g of wet membrane at 40°C, pH 3.4, produced 56.5% of soluble protein in 10h. The production is equivalent to 1.84 h total contact time between the substrate and the immobilized enzyme. The average productivity based on a stable enzyme activity and 20g of dry membrane was 329 mg of protein/g/mg of active enzyme immobilized. The productivity of the free enzyme in a batch reactor was 62.5 mg protein/h/mg enzyme.     

Prediction of continuous reactors performance based on batch reactor deactivation kinetics data of immobilized lipase

Experiments on deactivation kinetics of immobilized lipase enzyme fromCandida cylindracea were performed in stirred batch reactor using rice bran oil as the substrate and temperature as the deactivation parameter. The data were fitted in first order deactivation model. The effect of temperature on deactivation rate was represented by Arrhenius equation. Theoretical equations were developed based on pseudo-steady state approximation and Michaelis-Menten rate expression to predict the time course of conversion due to enzyme deactivation and apparent half-life of the immobilized enzyme activity in PFR and CSTR under constant feed rate policy for no diffusion limitation and diffusion limitation of first order. Stability of enzyme in these continuous reactors was predicted and factors affecting the stability were analyzed.     

Forced-flow bioreactor for sucrose inversion using ceramic membrane activated by silanization

A forced-flow enzyme membrane reactor system for sucrose inversion was investigated using three ceramic membranes having different pore sizes. Invertase was immobilized chemically to the inner surface of a ceramic membrane activated by a silane-glutaraldehyde technique. With the cross-flow filtration of sucrose solution, the reaction rate was a function of the permeate flux, easily controlled by pressure. Using 0.5 mum support pore size of membrane, the volumetric productivity obtained was 10 times higher than that in a reported immobilized enzyme column reactor, with a short residence time of 5 s and 100% conversion of the sucrose inversion.     

Conversion of cellobiose to glucose using immobilized β-glucosidase reactors

Cellobiose is an intermediate in the enzymatic hydrolysis of cellulose to glucose and acts as an inhibitor for the cellulase enzymes. The conversion of cellobiose to glucose was studied with β-glucosidase adsorbed on Amberlite DP-1, a cation-exchange resin. The best overall pH for adsorption and reactor operation was near 5.0. The K_m values increased with increasing enzyme loading due to competitive inhibition. The maximum practical enzyme loading was about 28 units/g resin. The immobilized enzyme was operated continously in both packed bed and fluidized bed reactors, giving half-lives between 200 and 375 h.     

Batch reactor performance for the enzymatic synthesis of cephalexin: influence of catalyst enzyme loading and particle size

A mathematical model is presented for the kinetically controlled synthesis of cephalexin that describes the heterogeneous reaction-diffusion process involved in a batch reactor with glyoxyl-agarose immobilized penicillin acylase. The model is based on equations considering reaction and diffusion components. Reaction kinetics was considered according to the mechanism proposed by Schro?n, while diffusion of the reacting species was described according to Fick's law. Intrinsic kinetic and diffusion parameters were experimentally determined in independent experiments. It was found that from the four kinetic constants, the one corresponding to the acyl-enzyme complex hydrolysis step had the greatest value, as previously reported by other authors. The effective diffusion coefficients of all substances were about 5×10(-10)m(2)/s, being 10% lower than free diffusion coefficients and therefore agreed with the highly porous structure of glyoxyl-agarose particles. Simulations made from the reaction-diffusion model equations were used to evaluate and analyze the impact of internal diffusional restrictions in function of catalyst enzyme loading and particle size. Increasing internal diffusional restrictions decreases the Cex synthesis/hydrolysis ratio, the conversion yield and the specific productivity. A nonlinear relationship between catalyst enzyme loading and specific productivity of Cex was obtained with the implication that an increase in catalyst enzyme loading will not increase the volumetric productivity by the same magnitude as it occurs with the free enzyme. Optimization of catalyst and reactor design should be done considering catalyst enzyme loading and particle size as the most important variables. The approach presented can be extended to other processes catalyzed by immobilized enzymes.     

Continuous alpha-amylase production using Bacillus amyloliquefaciens adsorbed on an ion exchange resin

Summary A method for the continuous production of extracellular alpha amylase by surface immobilized cells of Bacillus amyloliquefaciens NRC 2147 has been developed. A large-pore, macroreticular anionic exchange resin was capable of initially immobilizing an effective cell concentration of 17.5 g DW/1 (based on a total reactor volume of 160 ml). The reactor was operated continuously with a nutrient medium containing 15 g/l soluble starch, as well as yeast extract and salts. Aeration was achieved by sparging oxygen enriched air into the column inlet. Fermentor plugging by cells was avoided by periodically substituting the nutrient medium with medium lacking in both soluble starch and yeast extract. This fermentor was operated for over 200 h and obtained a steady state enzyme concentration of 18700 amylase activity units per litre (18.7 kU/l), and an enzyme volumetric productivity of 9700 amylase activity units per litre per hour (9.7 kU/l-h). Parallel fermentations were performed using a 2 l stirred vessel fermentor capable of operation in batch and continuous mode. All fermentation conditions employed were identical to those of the immobilized cell experiments in order to assess the performance of the immobilized cell reactor. Batch stirred tank operation yielded a maximum amylase activity of 150 kU/l and a volumetric productivity of 2.45 kU/l-h. The maximum cell concentration obtained was 5.85 g DW/l. Continuous stirred tank fermentation obtained a maximum effluent amylase activity of 6.9 kU/l and a maximum enzyme volumetric productivity of 2.73 kU/l-h. Both of these maximum values were observed at a dilution rate of 0.345 l/h. The immobilized cell reactor was observed to achieve larger volumetric productivities than either mode of stirred tank fermentation, but achieved an enzyme activity concentration lower than that of the batch stirred tank fermentor.     

Characterization of an immobilized cell, trickle bed reactor during long term butanol (ABE) fermentation

Acetone-butanol-ethanol (ABE) fermentation was performed continuously in an immobilized cell, trickle bed reactor for 54 days without, degeneration by maintaining the pH above 4.3. Column clogging was minimized by structured packing of immobilization matrix. The reactor contained two serial glass columns packed with Clostridium acetobutylicum adsorbed on 12- and 20-in.-long polyester sponge strips at total flow rates between 38 and 98.7 mL/h. Cells were initially grown at 20 g/L glucose resulting in low butanol (1.15 g/L) production encouraging cell growth. After the initial cell growth phase a higher glucose concentration (38.7 g/L) improved solvent yield from 13.2 to 24.1 wt%, and butanol production rate was the best. Further improvement in solvent yield and butanol production rate was not observed with 60 g/L of glucose. However, when the fresh nutrient supply was limited to only the first column, solvent yield increased to 27.3 wt% and butanol selectivity was improved to 0.592 as compared to 0.541 when fresh feed was fed to both columns. The highest butanol concentration of 5.2 g/L occurred at 55% conversion of the feed with 60 g/L glucose. Liquid product yield of immobilized cells approached the theoretical value reported in the literature. Glucose and product concentration profiles along the column showed that the columns can be divided into production and inhibition regions. The length of each zone was dependent upon the feed glucose concentration and feed pattern. Unlike batch fermentation, there was no clear distinction between acid and solvent production regions. The pH dropped, from 6.18-6.43 to 4.50-4.90 in the first inch of the reactor. The pH dropped further to 4.36-4.65 by the exit of the column. The results indicate that the strategy for long term stable operation with high solvent yield requires a structured packing of biologically stable porous matrix such as polyester sponge, a pH maintenance above 4.3, glucose concentrations up to 60 g/L and nutrient supply only to the inlet of the reactor.     

Continuous Biosorption of Pb,Cu, and Cd by Phanerochaete chrysosporium in a Packed Column Reactor

The dynamic removal of lead, copper and cadmium in a single component system by Phanerochaete chrysosporium was studied in packed columns. The packed columns consisted of biomass of P. chrysosporium immobilized on polyurethane foam cubes. The performances of packed columns were described through the concept of breakthrough and the values of column parameters predicted as a function of bed depth. The column biosorption data were evaluated in terms of maximum (equilibrium) capacity of the column, the amount of metal loading and the yield of the process. The maximum capacities for lead, copper and cadmium were 70.7, 43.7 and 70.8 mg, respectively, and their yields were 39.2, 40.6 and 41%, respectively. The kinetic and mass transfer aspects of the dynamic removal of the three metals were studied using three mathematical models commonly used to describe the column performance in adsorption processes. Column studies showed good agreement between the experimental data and the simulated breakthrough curves obtained with Adams-Bohart or the Wolborska model and the Clark model. While the initial segment of the breakthrough curve was defined by the Adams-Bohart and Wolborska models, the whole breakthrough curve was well predicted by the Clark model for all the three metals studied.     

Cellobiose hydrolysis using Pichia etchellsii cells immobilized in calcium alginate

The rate of celluose degradation, limited due to the inhibition by cellobiose, can be increased by the hydrolysis of cellobiose to glucose using immobilized beta-glucosidase. Production of beta-glucosidase in four yeasts was studied and a maximum activity of 1.22 IU/mg cells was obtained in cells of Pichia etchellsii when grown on 3% cellobiose as the sole carbon source. A study of the immobilization of beta-glucosidase containing cells of Pichia etchellsii on various solid supports was conducted and immobilization by entrapment in calcium alginate gel beads was found to be the most simple and efficient method. A retention of 96.5% of initial activity after ten sequential batch uses of the immobilized preparation was observed. The pH and temperature optima for free and immobilized cells were the same, i.e., 6.5 (0.05M Maleate buffer) and 50 degrees C, respectively. Even though the temperature optimum was found to be 50 degrees C, the enzyme exhibits a better thermal stability at 45 degrees C. Beads stored at 4 degrees C for six months retain 80% of their activity. Kinetic studies performed on free and immobilized cells shown that glucose is a noncompetitive product inhibitor.The immobilized preparation was found to be limited by pore diffusion but exhibited no film-diffusion resistance during packed bed column indicated by a low dispersion number of 0.1348. A model for reaction with pore diffusion for a noncompetitive type of inhibited system was developed and applied to the cellobiose hydrolysis system. The rate of reaction with diffusional limitations was determined by using the model and effectiveness factors were calculated for different particle sizes. An effectiveness factor of 0.49 was obtained for a particle diameter of 2.5 mm. The modified rate expression using the effectiveness factor represented batch and packed bed reactor operation satisfactorily. The productivity in the packed bed column was found to fall rapidly with increase in conversion rate indicating that the operating conditions of the column would have to be a compromise between high conversion rates and reasonable productivity. A half-life of over seven days was obtained at the operating temperature of 45 degrees C in continuous operation of the packed bed reactor. However, the half-life in the column was found to be greatly affected by temperature, increasing to over seventeen days at a temperature of 40 degrees C and decreasing to less than two days at 50 degrees C.     

Comparison between immobilized Kluyveromyces fragilis and Saccharomyces cerevisiae coimmobilized with beta-galactosidase, with respect to continuous ethanol production from concentrated whey permeate

Kluyveromyces fragilis immobilized in calcium alginate gel was compared to Saccharomyces cerevisiae coimmobilized with beta-galactosidase, for continuous ethanol production from whey permeate in packed-bed-type columns. Four different whey concentrations were studied, equivalent to 4.5, 10, 15, and 20% lactose, respectively. In all cases the coimmobilized preparation produced more ethanol than K. fragilis. The study went on for more than 5 weeks. K. fragilis showed a decline in activity after 20 days, while the coimmobilized preparation was stableduring the entrire investigation. Under experimental conditions theoretical yields of ethanol were obtained from 4.5 and 10% lactose substrates with the coimmobilized system. Using 15% lactose substrate, theoretical yields were only obtained when a galactose-adapted immobilized S. cerevisiae column was run in series with the coimmobilized column. Then a maximum of 71 g/L ethanol was produced with a productivity of 2.5 g/L h. The coimmobilized column alone gave a maximum ethanol concentration of 52 g/L with a productivity of 4.5 g/L h, whereas immobolized K. fragilis only produced 13 g/L ethanol with a productivity of 1.1 g/L h. It was not possible to obtain theoretical yields of ethanol from the highest substrate concentration.     

Comparative study of controlled pore glass, silica gel and poraver for the immobilization of urease to determine urea in a flow injection conductimetric biosensor system

This study compared the responses of three enzyme reactors containing urease immobilized on three types of solid support, controlled pore glass (CPG), silica gel and Poraver. The evaluation of each enzyme reactor column was done in a flow injection conductimetric system. When urea in the sample solution passed though the enzyme reactor, urease catalysed the hydrolysis of urea into charged products. A lab-built conductivity meter was used to measure the increase in conductivity of the solution. The responses of the enzyme reactor column with urease immobilized on CPG and silica gel were similar and were much higher than that of Poraver. Both CPG and silica gel reactor columns gave the same limit of detection, 0.5 mM, and the response was still linear up to 150mM. The analysis time was 4-5 min per sample. The enzyme reactor column with urease immobilized on CPG gave a slightly better sensitivity, 4% higher than the reactor with silica gel. The life time of the immobilized urease on CPG and silica gel were more than 310h operation time (used intermittently over 7 months). Good agreement was obtained when urea concentrations of human serum samples determined by the flow injection conductimetric biosensor system was compared to the conventional methods (Fearon and Berthelot reactions). These were statistically shown using the regression line and Wilcoxon signed rank tests. The results showed that the reactor with urease immobilized on silica gel had the same efficiency as the reactor with urease immobilized on CPG.     

Bioconversion of D-galactose to D-tagatose: continuous packed bed reaction with an immobilized thermostable L-arabinose isomerase and efficient purification by selective microbial degradation

The continuous enzymatic conversion of D-galactose to D-tagatose with an immobilized thermostable L-arabinose isomerase in packed-bed reactor and a novel method for D-tagatose purification were studied. L-arabinose isomerase from Thermoanaerobacter mathranii (TMAI) was recombinantly overexpressed and immobilized in calcium alginate. The effects of pH and temperature on D-tagatose production reaction catalyzed by free and immobilized TMAI were investigated. The optimal condition for free enzyme was pH 8.0, 60°C, 5 mM MnCl(2). However, that for immobilized enzyme was pH 7.5, 75°C, 5 mM MnCl(2). In addition, the catalytic activity of immobilized enzyme at high temperature and low pH was significantly improved compared with free enzyme. The optimum reaction yield with immobilized TMAI increased by four percentage points to 43.9% compared with that of free TMAI. The highest productivity of 10 g/L h was achieved with the yield of 23.3%. Continuous production was performed at 70°C; after 168 h, the reaction yield was still above 30%. The resultant syrup was then incubated with Saccharomyces cerevisiae L1 cells. The selective degradation of D-galactose was achieved, obtaining D-tagatose with the purity above 95%. The established production and separation methods further potentiate the industrial production of D-tagatose via bioconversion and biopurification processes.     

Some properties of a papain–agarose reactor provided with a pH monitor

A small reactor of immobilized papain was used to gain some knowledge about the effect of immobilization upon the reactivity of the enzyme towards one substrate and various types of inhibitors. A buffer solution containing benzoyl–arginine ethyl ester as substrate was run through a small column of papain immobilized by attachment to agarose beads. The pH of the effluent was measured continuously and provided the data used to calculate the substrate conversion during passage through the reactor. The operation of the system was checked by determining the substrate conversion as a function of flow rate. It proved to operate as theory demanded. The rate and extent of inhibition were measured after addition of various inhibitors to the buffer–substrate solution. The following quantities of immobilized papain were found to be equal within ±20% to those of the free enzyme in solution: the overall activity, the K_m of benzoyl–arginine ethyl ester, the K_i of the competitive inhibitor benzoylamino-acetonitrile, the rate of inactivation by chloroacetic acid and by chloroacetamide, the rate of activation by cysteine of the mixed disulfide of papain and cysteine, and the rate of spontaneous reactivation of the KCNO–papain adduct. The inactivation by KCNO proved to be strongly pH dependent. This may explain why the rate of the latter reaction is only 66% of the rate with free enzyme. It is concluded that the rates and equilibrium constants measured in the present reactor system are within ±20% of the values of the dissolved enzyme, provided that the reactions are not strongly pH dependent. Calculation showed there was no diffusion limitation.