Fluorescence formation from the interaction of DNA with lipid oxidation degradation products

To clarify the mechanism of fluorescence formation between DNA and lipid degradation products in the presence of ferric chloride and ascorbic acid, a number of carbonyl compounds and decomposition products of pure methyl linolenate hydroperoxides were examined. Keto derivatives of methyl ricinoleate, linoleate, and oleate, alkanals and 2-alkenals produced little or no fluorescence with DNA in the presence of ferric chloride-ascorbic acid. 2,4-Alkadienals were more active and 2,4,7-decatrienal was the most active. Mixtures of volatile aldehydes prepared from linolenate hydroperoxide decomposed either thermally or with iron and ascorbate had the same activity as 2,4,7-decatrienal. Higher molecular-weight products from the decomposition of methyl linolenate hydroperoxides showed relatively low activity. beta-Carotene, alpha-tocopherol and other antioxidants effectively reduced the amount of fluorescence formed by linolenate hydroperoxides. The results suggest that, in addition to hydroperoxide decomposition products, singlet oxygen and/or free radical species contribute significantly to the fluorescence formed from the interaction of methyl linolenate hydroperoxides with DNA in the presence of ferric chloride and ascorbic acid.     

The reaction of DNA with lipid oxidation products, metals and reducing agents

The interaction of lipid hydroperoxides and secondary oxidation products with DNA was investigated by evaluating the fluorescence formed in the presence of metals and reducing agents. We also investigated the effect of malonaldehyde, because it has been generally considered responsible for the formation of fluorescence with DNA. However, malonaldehyde usually has been estimated by the notoriously unspecific thiobarbituric acid test. At low concentration of oxidation products (1 mM), fluorescence formation required the presence of metals and ascorbic acid. In contrast, a positive thiobarbituric acid reaction was obtained with many lipid oxidation products without metals or ascorbic acid. Monohydroperoxides from autoxidized methyl linoleate and linolenate produced the highest level of fluorescence. Hydroperoxy epidioxides of linolenate and dihydroperoxides of linoleate and linolenate were among the most active secondary products in forming fluorescence with DNA. In contrast, malonaldehyde produced very little fluorescence under our conditions. The thiobarbituric acid values did not correlate with fluorescence formation. This study showed that, in our model reaction system, DNA forms fluorescent products by the breakdown of lipid oxidation products in the presence of metals and ascorbic acid into reactive materials other than malonaldehyde. Therefore, the importance of malonaldehyde in its crosslinking properties with DNA may have been exaggerated in the literature.     

Rat testis lipoxygenase-like enzyme. Characterization of products from linoleic acid.

The linoleate oxidation products of the affinity chromatography-purified lipoxygenase-like enzyme isolated from rat testes microsomes were characterized. Three types of reaction products separated by thin-layer chromatography were generally present: polar byproducts (A and B) and hydroperoxides. The methyl hydroxystearates obtained from the enzymically produced hydroperoxides were analysed by gas-liquid chromatography and showed a ratio of 67% 13-hydroxy isomer to 33% 9-hydroxy isomer. The major polar byproduct was analysed by infrared spectra, nuclear magnetic resonance and mass spectrometry (of the toluene-p-sulphonyl derivative) and its structure was established as 13-hydroxy-12-oxo-octadec-cis-9-enoic acid. The possibility of the existence of a linoleate hydroperoxide isomerase in the affinity-purified preparation is discussed.     

Decomposition products of Dimers Arising from Secondary Oxidation of Methyl Linoleate Hydroperoxides

Dimers formed in aerated methyl linoleate hydroperoxides were decomposed in liquid paraffin by bubbling with dry air at 30°C for 24 hr to identify the decomposition products. The aerated dimers were fractionated according to their molecular weights by gel permeation chromatography. Identification of the monomeric (25.6%) and low molecular fission products (10.8%) by gas chromatography-mass spectrometry showed the major monomers as methyl hydroxy-octadecadienoate, methyl hydroxy (or hydroperoxy)-epoxy-octadecenoate, methyl dihydroxy (or hydroperoxy)-octadecenoate, methyl trihydroxy (or hydroperoxy)-octadecenoate; and the major fission products as methyl 8-hydroxy-octanoate, 4-hydroxy (or hydroperoxy)-nonanal or -2-nonenal, methyl 12-oxo-9-hydroxy (or hydroperoxy)-dodecanoate or -10-dodecenoate, and methyl 11-oxo-9-undecenoate.

The monomeric products were presumed to be derived from alkoxy radicals generated by the cleavage of peroxy linkages in the dimers, whereas the low molecular products were suggested to be raised by the direct carbon-carbon scission of oxygenated ester moieties on both sides of the peroxy bonds.     

Further Oxygenated Compounds Produced from Methyl Linoleate Monohydroperoxides at the Process of Autoxidation

The primary stable products, methyl linoleate monohydroperoxides (MLHPO), formed by the autoxidation of methyl linoleate were characterized by gas chromatography-mass spectrometry. MLHPO was converted into methyl hydroxy stearates which consisted of two isomers, methyl 9-hydroxy and methyl 13-hydroxy stearate. Trimethylsilyl ether derivatives of these hydroxy isomers were separated directly by gas chromatography and mass fragmentgraphy. MLHPO was degradated by incubating under aerobic condition at 37°C for a week, and the quantity of MLHPO was determined as hydroxy derivatives. Decrease of MLHPO was almost similar to that of conjugated diene structure, but the peroxide value was not appreciably decreased during the incubation. This fact based on the formation of further oxygenated compounds. After chemical reduction, these compounds were identified as methyl 9,13-hydroxy octadecenoate and methyl 9,12,13- or 9,10,13-trihydroxy octadecenoate, in which oxygen attached to the conjugated diene. The formation mechanisms of these oxygenated compounds are proposed.     

Lipoxygenase-like enzyme in rat testis microsomes.

Microsomes, separated from rat testes, were found capable of oxidizing linoleate and arachidonate. The enzyme activity was solubilized with 1% Triton X-100 in acetate buffer (pH 5.0) and purified by affinity chromatography. The overall purification from the starting preparation was approx. 40-fold. The affinity-purified enzyme was almost homogeneous as determined by electrophoresis in polyacrylamide gel. The enzyme was characterized as lipoxygenase-like from its spectrum, specificity, effect of linoleate on its fluorescence and linoleate oxidation products. Three types of compounds separated by thin-layer chromatography were generally present in the lipoxygenase-like enzyme reaction on linoleic acid: substrate fatty acid, polar by-products and hydroperoxides. The hydroperoxides were analyzed by infrared spectra and mass spectrometry and showed the presence of both 9- and 13-hydroxy isomers.     

Methyl linoleate ozonide as a substrate for rat glutathione S-transferases: reaction pathway and isoenzyme selectivity

The 9,10-mono-ozonide of methyl linoleate was shown to be a substrate for rat hepatic cytosolic, rat lung cytosolic and rat hepatic microsomal glutathione S-transferases (GST). The activities of lung cytosol and liver microsomes with methyl linoleate ozonide (MLO) were found to be high relative to the activity demonstrated by liver cytosol, as compared with their respective activities towards 1-chloro-2,4-dinitrobenzene (CDNB). Only a slight catalytic activity towards the ozonide was noticed for rat lung microsomes. Isoenzyme 2-2 exhibited the highest specific activity (208 nmol/min/mg) when isoenzymes 1-1, 1-2, 2-2, 3-3, 3-4, 4-4 and 7-7 were compared. This isoenzyme accounts for approx. 25% of cytosolic GST protein in rat lung, while in rat liver it represents approx. 9%. This may partly explain the high activity towards the ozonide noticed for rat lung cytosol. No stable conjugates were formed as products of the reaction of MLO with glutathione; although two glutathione-conjugates were noticed on TLC, they were only formed as intermediate compounds. Coupling of an aldehyde dehydrogenase assay or a glutathione reductase assay to the GST-catalyzed conjugation, demonstrated that oxidized glutathione and aldehydes are formed as the major products in the reaction. To further confirm the formation of aldehydes, the products of the GST-catalyzed reaction were incubated with 2,4-dinitrophenylhydrazine, which resulted in hydrazone formation. In conclusion, the activity of the GST towards the ozonide of methyl linoleate is similar to their peroxidase activity with lipid hydroperoxides as substrates.     

Determination of thiobarbituric acid-reactive substances in oxidized lipids by high-performance liquid chromatography with a postcolumn reaction system

A new high-performance liquid chromatography procedure with a postcolumn reaction system for determination of free malondialdehyde (MDA) and other thiobarbituric acid-reactive substances (TBA-RS) in oxidized lipids in vitro has been developed. Using this procedure, both thermally oxidized methyl linoleate and the degradation products of methyl linoleate hydroperoxides revealed many kinds of lipophilic TBA-RS, but no free MDA was detected on the high-performance liquid chromatography. Similarly, oxidized methyl arachidonate also produced certain kinds of TBA-RS in the lipophilic phase and a small amount of free MDA in the hydrophilic phase. These results indicate that lipophilic TBA-RS produced in oxidized lipids in vitro are major TBA-RS and that the production of free MDA is small, even though the degree of lipid oxidation has previously been estimated as an MDA equivalent measured by the TBA colorimetric test.     

Water soluble products of UV-irradiated autoxidized linoleic and linolenic acids

The water-soluble products of the UV-initiated autoxidation of linoleic and linolenic acids emulsified in water were separated into volatile and relatively involatile components, each of which reacted with both thiobarbituric acid (TBA) and peroxidase. The volatile TBA-reactive compound is probably malonaldehyde and the volatile peroxidase-reactive compound is hydrogen peroxide. Additional compounds which absorb UV light were present in the volatile fraction. After thin-layer chromatography of the involatile fraction, reactivity toward TBA and peroxidase was found in the same spot. Approximate molar yields of hydrogen peroxide, malonaldehyde, "hydroperoxides", and other TBA-reactive compounds were estimated. The ratio of "hydroperoxide" to TBA reactivity was lower for linoleic than for linolenic acid. The mass of relatively involatile compounds was about 20 times greater than that predicted from either peroxidase or TBA assays of water extracts of oxidized linolenic acid. The properties of the water extract were similar to those shown by others for the products of prolonged autoxidation (without UV-irradiation) of emulsified methyl linoleate.     

Drug metabolism-based design, synthesis, and bioactivities of 1-(2,6-dimethylphenoxy)-2-(3,4-dimethoxyphenylethylamino)propane hydrochloride (DDPH) analogs as α₁-adrenoceptors antagonists

1-(2,6-dimethylphenoxy)-2-(3,4-dimethoxyphenylethylamino)propane hydrochloride (DDPH) is a potent α?-adrenoceptor antagonist that is currently under Phase II clinic trials. However, the fast metabolism has restricted its further use. In this paper, 11 DDPH analogs were designed according to the probable metabolism pathways of DDPH, and featured the structures of halogen, methyl, and cyano groups at the 3-, or 4-position of aromatic ring A to block the hydroxylation, and one hydroxyl group at the 3-, or 4-position of aromatic ring B to extend the duration time. These compounds were synthesized in moderate to good yields from the reductive amination of substituted phenoxyacetones with substituted phenylethylamines, and fully characterized with 1H NMR, IR, and HRMS. Biological evaluation indicated that most of the compounds exhibited strong blocking and moderate to good antihypertensive activities. It is clear that the compounds having 4-OH/3-OMe on group B exhibited higher blocking activities and longer duration time than their corresponding analogs having 4-OMe/3-OMe (and also 3-OH/4-OMe). Among them, compound 13 having bromo group at the 4-position of ring A and 4-OH/3-OMe on group B, exhibited the highest blocking activity, whereas compound 17 that had a methyl group at the 4-position of ring A and a hydroxyl group at the 4-position of ring B, was more active than potent DDPH in terms of both blocking and antihypertensive activities. In addition, the possible correlations between the blocking and antihypertensive activities are also briefly discussed.     

Reactivity toward oxygen radicals and antioxidant action of thiol compounds

Thiol compounds exert diverse functions in the defense network against oxidative stress in vivo. Above all, the role of glutathione in the enzymatic removal of hydrogen peroxide and lipid hydroperoxides has been well established. The scavenging of reactive free radicals is one of the many functions. In this study, the reactivities of several thiol compounds toward oxygen- and nitrogen-centered radicals were measured from their reaction with galvinoxyl and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals and also from their sparing effects on the decay of fluorescein, pyrogallol red, and BODIPY induced by peroxyl radicals. Furthermore, the antioxidant capacity against lipid peroxidation was assessed in the oxidation of methyl linoleate induced by free radicals in micelle systems. Cysteine, homocysteine, and glutathione exhibited considerable reactivity toward galvinoxyl, DPPH, and peroxyl radicals in this order but methionine did not. Bovine serum albumin (BSA) was less reactive toward these radicals than cysteine on molar base. Cysteine, homocysteine, and glutathione suppressed the oxidation of methyl linoleate in micelle systems, but methionine did not. The reactivity toward free radicals and antioxidant capacity of these thiol compounds were less than that of ascorbic acid, but higher than that of uric acid.     

Thin-layer chromatography blotting for the fluorescence detection of phospholipid hydroperoxides and cholesteryl ester hydroperoxides

A blotting technique was developed to specifically detect lipid hydroperoxides in thin-layer chromatography. Phosphatidylcholine hydroperoxides and cholesteryl linoleate hydroperoxides ranging from 0.1 to 0.5 nmol, which were prepared by reaction with soybean lipoxygenase, were visualized as fluorescent spots on the blotted membrane by immersing the plate into a blotting solvent containing 0.01% (w/v) diphenyl-1-pyrenylphosphine. This technique was applied successfully to monitor lipid peroxidation in human low-density lipoprotein in vitro.     

Peroxidation of linoleate at physiological pH: hemichrome formation by substrate binding protects against metmyoglobin activation by hydrogen peroxide

Peroxidation by metmyoglobin, MbFe(III), by metmyoglobin/hydrogen peroxide, MbFe(III)/H(2)O(2), to yield the myoglobin ferryl radical (*MbFe(IV)=O), or by ferrylmyoglobin, MbFe(IV)=O, was investigated at physiological pH (7.4) in oil-in-water linoleate emulsions. Linoleate peroxidation was followed using second derivative ultraviolet (UV)-spectroscopy for monitoring formation of conjugated dienes and quantitative determination of specific linoleate hydroperoxides by liquid chromatography with photodiode absorption detection. Modifications of myoglobins during lipid peroxidation were followed simultaneously by changes in the Soret absorption band (410 or 424 nm), and in the visible absorption region (from 450 to 700 nm), combined with electron spin resonance (ESR) spectroscopy for direct detection of changes in the spin state of the iron center. In contrast to MbFe(IV)=O, MbFe(III) and MbFe(III)/H(2)O(2) were not able to initiate linoleate peroxidation in oil-in-water emulsions, and MbFe(III) was converted, by binding of linoleate (but not methyl linoleate), to a low-spin hemichrome derivate, HMbFe(III), with the distal histidine reversibly bound to the iron center. HMbFe(III) is ineffective in initiating lipid peroxidation and cannot be activated to *MbFe(IV)=O or MbFe(IV)=O by addition of moderate amounts of H(2)O(2). Addition of MbFe(III) to linoleate emulsions containing H(2)O(2) results in the competitive formation of *MbFe(IV)=O and HMbFe(III) in favor of HMbFe(III), and little linoleate peroxidation is detected, demonstrating the inherent protection, at physiologic pH, against peroxidation by reversible binding of the substrate to the potential myoglobin catalyst.     

Degradation Process of Autoxidized Methyl Linoleate

Methyl linoleate (ML) and methyl linoleate hydroperoxides (MLHPO) were degradated by incubating under an aerobic condition at 37°C for a week. Identification of secondary degradation products (SP) by gas chromatography-mass spectrometry showed that the high proportions of hexanal, methyl octanoate and 8-formyl methyl octanoate (8-FMO) were found in degradated ML or MLHPO. In degradation of MLHPO, the decrease of peroxide value (POV) was slower than that of conjugated diene. In the earlier stage, POV was scarcely decreased, but in the later stage, MLHPO disappeared and another secondary hydroperoxides were produced. ML decreased linearly during 4-day incubation and the amount reached to 10% of the original one. The formation of 8-FMO was delayed to the increase of POV. Degradation process of autoxidized ML was discussed with the changes of POV, UV absorption and the amount of 8-FMO, and a formation mechanism of some SP was proposed.     

Reaction products of [60]fullerene during the autoxidation of methyl linoleate in bulk phase

The antioxidative action of fullerenes has received much attention, but their reaction mechanism toward lipid-derived peroxyl radicals has not been well elucidated. In this study, the reaction products of [60]fullerene (C(60)) during the autoxidation of methyl linoleate (MeL) were isolated and their structures were characterized. MeL containing 0.1mol% C(60) was autoxidized at 60°C in bulk phase and two reaction products of C(60), 1 and 2, were obtained. The structure of 1 was the addition products of C(60) with 9-peroxyl-10-alkyl radicals of methyl (11E)-13-hydroperoxy-11-octadecaenoate (1a and 1b) and with 12-alkyl-13-peroxyl radicals of methyl (10E)-9-hydroperoxy-10-octadecaenoate (1c and 1d). 2 was a mixture of the addition products of C(60) with 9,11-dialkyl radicals of methyl 9,12-octadecadienoate (2a) and with 11,13-dialkyl radicals of methyl 9,12-octadecadienoate (2b). When MeL containing 0.1mol% C(60) was autoxidized at 60°C under air-sufficient and air-insufficient conditions, C(60) could suppress the formation of MeL hydroperoxides in both conditions. The reaction product of C(60) first formed was 2 even under air-sufficient conditions, and then 1 was accumulated. The results indicate that the primary antioxidative action of C(60) would be trapping of chain-initiating carbon-centered radicals of unsaturated lipid to form 2.     

Crystallization and positional specificity of hydroperoxidation of Fusarium lipoxygenase.

A lipoxygenase obtained from the fungus Fusarium oxysporum was purified and crystallized. Using the purified enzyme, the positional specificity of linoleate peroxidation was studied. Linoleate hydroperoxides were converted into the corresponding trimethylsilyl derivative by reduction, catalytic hydrogenation and treatment with hexamethyldisilazane/trimethylchlorosilane/pyridine and then analyzed by combined gas-liquid chromatography-mass spectrometry. Fusarium lipoxygenase was found to produce 9- or 13-hydroperoxy-octadecadienoates from linoleate. The ratio of 9- to 13-hydroperoxides produced by the enzyme was also determined by high performance liquid chromatography of their methyl esters. When the enzymic reaction proceeded at pH 9.0 and 12.0, the ratio of 9- to 13-hydroperoxide isomers was 70 : 30 and 56 : 44, respectively. With the use of the heavy isotope of oxygen (18O2), atoms of oxygen introduced into hydroperoxides were found to be derived from the gaseous phase and not from the aqueous phase.     

Estimation of lipid peroxidation of live cells using a fluorescent probe, diphenyl-1-pyrenylphosphine.

Diphenyl-1-pyrenylphosphine (DPPP), which reacts with lipid hydroperoxides stoichiometrically to yield fluorescent product DPPP oxide, was used as a fluorescent probe for lipid peroxidation in live cells. DPPP was successfully incorporated into U937 cells. Incorporation of DPPP into the cell membrane was confirmed by fluorescence microscopy. Reaction of DPPP with hydroperoxides was examined by monitoring increase in fluorescence intensity of the cell. It was found that lipid-soluble hydroperoxides such as methyl linoleate hydroperoxide preferably react with DPPP, whereas hydrogen peroxide did not react with DPPP located in the membrane. Linear correlation between increase in fluorescence intensity and the amount of methyl linoleate hydroperoxide applied to the cell was observed. DPPP gave little effect on cell proliferation, cell viability or cell morphology for at least 3 d. DPPP oxide, fluorescent product of DPPP, was quite stable in the membrane of living cells for at least 2 d. Fluorescence of DPPP-labeled cells was measured after treating with diethylmaleate (DEM), or 2,2'-Azobis(2-amidinopropane) dihydrochloride (AAPH), or culturing with low serum content. These reagents and culture condition induced dose- and/or time-dependent increase in fluorescence. Addition of vitamin E effectively suppressed increase in fluorescence. When DPPP-labeled cells and DCFH-DA-labeled cells were treated with NO, H(2)O(2), AAPH, and DEM to compare the formation of hydoperoxides in the membrane and cytosol, distinct patterns of peroxide formation were observed. These results indicate that fluorescent probe DPPP is eligible for estimation of lipid peroxidation proceeding in the membrane of live cells, and use of this probe is especially advantageous in long-term peroxidation of the cell.     

Ascorbic acid and copper in linoleate oxidation. I. Measurement of oxidation by ultraviolet spectrophotometry and the thiobarbituric acid test

The UV absorption method and the thiobarbituric acid (TBA) test for oxidation of an aqueous suspension of linoleate were compared. The absorption method depends on the formation of hydroperoxides having conjugated double bonds that absorb strongly at 233 nm. The absorption at 233 nm increased markedly during oxidation of linoleate catalyzed by either ascorbic acid or cupric ions. The concentration of ascorbic acid in the reaction mixture was also measured by UV absorption at 265 nm and pH 7.0. Color development in the TBA test also increased markedly with the extent of oxidation of linoleate. When ascorbic acid was the catalyst, UV absorption detected early stages of oxidation with greater sensitivity than the TBA test. The reverse was true when Cu(++) was the catalyst. In general, the relation between the two procedures will depend on whether copper is present when the TBA test is made.     

Oxidation of Methyl-Substituted Naphthalenes: Pathways in a Versatile Sphingomonas paucimobilis Strain

Aromatic compounds with alkyl substituents are abundant in fossil fuels. These compounds become important environmental sources of soluble toxic products, developmental inhibitors, etc. principally through biological activities. To assess the effect of methyl substitution on the completeness of mineralization and accumulation of pathway products, an isolate from a phenanthrene enrichment culture, Sphingomonas paucimobilis 2322, was used. Washed cell suspensions containing cells grown on 2,6-dimethylnaphthalene in mineral medium were incubated with various mono-, di-, and trimethylnaphthalene isomers, and the products were identified and quantified by gas chromatography and mass spectrometry. The data revealed enzymes with relaxed substrate specificity that initiate metabolism either by methyl group monoxygenation or by ring dioxygenation. Congeners with a methyl group on each ring initially hydroxylate a methyl, and this is followed by conversion to a carboxyl; when there are two methyl groups on a single ring, the first reaction is aryl dioxygenation of the unsubstituted ring. Intermediates are channeled to primary ring fission via dihydrodiols to form methyl-substituted salicylates. Further evidence that there are multiple pathways comes from the fact that both phthalate and (methyl)salicylate are formed from 2-methylnaphthalene.     

Synthesis of mixed esters of ascorbic acid using methyl esters of palm and soybean oils

Mixed esters of ascorbic acid were synthesized using methyl esters of palm and soybean oils as acyl donors, in acetone at 50 degrees C, and catalyzed by Novozym 435. A conversion of 62% was obtained with palm oil methyl ester at an ascorbic acid to acyl donor molar ratio of 1:4; the mixed ester contained 45.89% ascorbyl palmitate, 42.59% ascorbyl oleate and 10.1% ascorbyl linoleate. Acylation with soybean oil methyl ester resulted in 17% conversion, yielding a mixed ester containing 10.08% ascorbyl palmitate, 20.68% ascorbyl oleate, and 64.96% of ascorbyl linoleate. The mixed esters of ascorbic acid can find direct use in food and cosmetics.