Comparison of Extractants for Removing Heavy Metals from Contaminated Clayey Soils

This article describes the removal of heavy metals from contaminated clayey soils by soil washing using various extractants. Two clayey soils, kaolin, a low buffering soil with pH of 5, and glacial till, a high buffering soil with pH of 8, were used to represent various soil conditions. These soils were spiked with chromium (Cr), nickel (Ni), and cadmium (Cd) to simulate improper disposal of typical electroplating waste constituents. The following extracting solutions were investigated for the removal of heavy metals from the soils: deionized water, distilled water, and tap water; acetic acid and phosphoric acid; chelating agents ethylenediaminetetraacetic acid (EDTA) and citric acid; and the oxidizing agents potassium permanganate and hydrogen peroxide. The effect of extractant concentration on removal of heavy metals was also investigated. Complete removal of Cr was achieved using 0.1?M potassium permanganate for kaolin, while a maximum of 54% was removed from glacial till. A maximum Ni removal of 80% was achieved using tapwater for kaolin, while a maximum removal of 48 to 52% was achieved using either 1?M acetic acid or 0.1?M citric acid for glacial till. A maximum Cd removal of 50% was achieved using any of the extractants for kaolin, while a maximum removal of 45 to 48% was obtained using either acids or chelating agents for glacial till. Overall, this study showed that complete removal of Cr, Ni, and Cd from clayey soils is difficult to achieve using the soil-washing process, and also the use of one extractant may not be effective in removing all metals. A sequential extraction using different extractants may be needed for the removal of multiple metal contaminants from clayey soils.     

Simultaneous Desorption and Desorption Kinetics of Phenanthrene,Anthracene, and Heavy Metals from Kaolinite with Different Organic Matter Content

Soils contaminated simultaneously with polycyclic aromatic hydrocarbons (PAHs) and heavy metals pose major threat to human health and environment by getting released from soil into water environment. The purpose of this study was to evaluate simultaneous desorption and desorption kinetics of PAHs (phenanthrene and anthracene) and heavy metals (lead, nickel, and zinc) from artificially contaminated kaolinite soils with different organic matter content. Batch desorption tests were conducted using single and combined enhancing agents containing Triton X-100 and Tween 80 as non-ionic surfactants, Ethylenediaminetetraacetic acid (EDTA) as a chelating agent, and citric acid as an organic acid. The solution with the highest removal efficiency was the combined solution of Triton X-100 (10% w/w) + EDTA (0.01 M). Removal levels around 92, 46, 92, 95, and 96% were obtained for phenanthrene, anthracene, lead, nickel, and zinc, respectively, by using this combination. Batch desorption kinetics experiments were performed using the mentioned combination. During the first 24 h, desorption kinetics were rapid, followed by a plateau until the end. The data obtained from desorption kinetics experiments were fitted with four kinetics models: pseudo-second-order equation, empirical power function, elovich, and parabolic diffusion. The correlation coefficient of the pseudo-second-order equation was higher than that of other functions. Moreover, batch experiments have showed inverse correlations between removal efficiency and organic matter content of soil.     

Assessment of Some Heavy Metals in the Dead Sea Mud and Treatment Optimization

This paper describes the experimental remediation of the Dead Sea mud and the quantitative determination of some heavy metals. Herein, two chelating agents were employed as extracting aqueous solution: ethylenediaminetetraacetic acid (EDTA) and citric acid. The study focused on the main known heavy metals that were reported previously to be in the Dead Sea mud, which are Co, Ni, Pb, Zn, and Cr. Findings had indicated that citric acid was efficient in the removal of the aforementioned heavy metals. Physicochemical parameters that were expected to affect the removal of metals in the Dead Sea mud were optimized. Those parameters were the chelating agent concentration, mixing time and speed, type of washing water, temperature, and pH. The results showed that the best removal of heavy metals from Dead Sea mud can be achieved under optimum citric acid concentration, 1.5 g/50 mL for treatment of 10 g mud. Optimum mixing speed and time were found to be 800 rpm and 1 hr, respectively. Regarding washing water, it was found that the use of the same water for repeated washing provided better removal percentages. pH values and temperature had effect on removal percentages of the heavy metals from mud. However, working at pH 7 and room temperature would provide convenient results for heavy metal removal.     

柠檬酸、草酸和乙酸对污泥中镉、铅、铜和锌的去除效果

研究了柠檬酸、草酸和乙酸对污泥中Cd、Pb、Cu和Zn等重金属的去除效果,并分析了污泥中重金属的形态变化和生物有效性.结果表明,随着反应时间和酸浓度的增加,污泥中重金属（Cu除外）的去除率也相应增加.污泥加入柠檬酸溶液反应7 h即可去除污泥中52.0%的Pb和74.2％的Zn, 24 h后可去除76.0%的Pb和92.5%的Zn,草酸和乙酸对重金属的去除率较低.柠檬酸去除的Pb和Zn主要以稳定态存在,并导致污泥中不稳定态重金属的比例上升,其中可交换态重金属浓度有不同程度的增加.虽然有机酸对Cd和Cu的去除率较低,但反应后可交换态Cd和Cu的浓度仍有小幅增加.     

Transient Phytoextraction Agents: Establishing Criteria for the Use of Chelants in Phytoextraction of Recalcitrant Metals

The phytoremediation of recalcitrant metals such as lead and uranium rely on soil amendments to enhance metal availability within the rhizosphere. Because these amendments may persist in soils, agents that not only biodegrade rapidly but also are effective in triggering metal uptake in plants are needed for metals phytoextraction to be considered as an accepted practice. In this study, several biodegradable organic acids and chelating agents were assessed to determine if these amendments can be used in an effective manner, and if their activity and use is consistent with a proposed class of soil amendments for phytoextraction, here termed transient phytoextraction agents (TPAs). A TPA is proposed as an agent that would exhibit both effectiveness in triggering plant accumulation of the targeted metal while minimizing the risk of migration through rapid degradation or inactivation of the soluble complex. Eleven candidate TPAs (acetic acid, ascorbic acid, citric acid, malic acid, oxalic acid, succinic acid, ethylenediaminedisuccinic acid, dicarboxymethylglutamic acid, nitrilotriacetic acid, BayPure® CX 100, and the siderophore desferrioxamine B) were tested in batch studies to evaluate their complexation behavior using contaminated soils, with uranium and lead as the target metals. A growth chamber study was then conducted with Brassica juncea (Indian mustard), Helianthus annuus (sunflower), and Festuca arundinacea (tall fescue) grown in a lead-contaminated soil that was treated with the candidate TPAs to assess phytoextraction effectiveness. For the soils tested, citric acid, oxalic acid, and succinic acid were found to be effective complexing agents for uranium phytoextraction, whereas Baypure® CX 100 and citric acid exhibited effectiveness for lead phytoextraction.     

Rhamnolipid biosurfactant-enhanced soil flushing for the removal of arsenic and heavy metals from mine tailings

Mine tailings containing high contents of arsenic and heavy metals are potential environmental contamination sources. Column experiments were conducted in this study to evaluate the feasibility of using a rhamnolipid biosurfactant (JBR425) to enhance the removal of arsenic and heavy metals from an oxidized mine tailings sample collected from Bathurst, Canada. Capillary electrophoresis (CE) analyses indicated that arsenate [As(V)] was the only extractable arsenic species in the mine tailings. The addition of rhamnolipids did not change the oxidation state of arsenic. It was found that a 0.1% rhamnolipid solution (initial pH adjusted to 11) could significantly enhance the removal of arsenic and heavy metals (i.e., Cu, Pb and Zn) simultaneously. The accumulative removal of arsenic, Cu, Pb and Zn reached 148, 74, 2379, and 259 mg/kg after a 70-pore-volume flushing, respectively. Moreover, the mobilization of arsenic and heavy metals by rhamnolipids was found to be positively correlated with that of Fe, and the mobilization of arsenic was also positively correlated to that of the heavy metals. The mobilization of co-existing metals, to some extent, might enhance arsenic mobilization in the presence of rhamnolipids by helping incorporate it into aqueous organic complexes or micelles through metal-bridging mechanisms.     

Metal Removal from Contaminated Soils Through Bioleaching with Oxidizing Bacteria and Rhamnolipid Biosurfactants

The use of surfactants as a method for solubilization and removal of heavy metal contamination from soil has been reported before. Biosurfactants produced by some microorganisms are able to modify the surface of various metals and aggregate on interphases favoring the metal separation process from contaminated environments. We evaluated the feasibility of enhancing the removal of metal ions from mineral waste/contaminated soils using alternate cycles of treatment with rhamnolipid biosurfactants and bioleaching with a mixed bacterial culture of Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans. Bioleaching alone removed 50% Zn and 19% Fe. When rhamnolipids were used at low concentration (0.4 mg/mL), 11% Fe and 25% Zn were removed, while at 1 mg/mL 19% Fe and 52% Zn removal were achieved. When using a cyclic treatment combining bioleaching and biosurfactants, metal removal reached up to 36% for Fe and 63% to 70% for Zn.     

The performance of vetivers (Chrysopogon zizaniodes and Chrysopogon nemoralis) on heavy metals phytoremediation: laboratory investigation

Abstract

Phytoremediation with vetiver was investigated in relation to heavy metal contaminated soil in Thailand. The work compared the performance of two species of vetiver named Songkhla 3 (Chrysopogon zizaniodes) and Prachuap Khiri Khan (Chrysopogon nemoralis) in absorbing lead, zinc, and cadmium in contaminated soils. Toxicity Characteristic Leaching Procedure (TCLP), and Allium tests were conducted to determine toxicity of treated soil. Ethylenediaminetetraacetic acid (EDTA) was also used to increase heavy metals concentration in solution in soil, which led to an increase in translocation and bioaccumulation factors. In general, results showed that concentration of heavy metals decreased in soil and increased in both the shoots and roots of vetivers during a 4-month treatment period. TCLP results indicated that the concentration of zinc and cadmium in contaminated soil was reduced over treatment time, and significantly increased after EDTA was applied. To confirm vetiver performance in phytoremediation, Allium testing showed that remained heavy metals in treated soils had no effect on nucleus aberration. Songkhla 3 and Prachuap Khiri Khan showed similar trends in their ability to remediate lead, zinc, and cadmium from contaminated soil. Both species could accumulate higher concentrations of heavy metals in their shoots and roots over time, and with EDTA application.     

Lead and cadmium content of Indian flue-cured tobacco

Summary Studies on levels of lead and cadmium of Indian flue-cured tobacco indicated that the leaf contained very low amounts of these heavy metals as compared to tobacco from other countries. Indian tobacco can therefore be adjudged as ‘safe and clean’ and least hazardous to the smoker. Of the two heavy metals, lead content of soils is higher than cadmium. But in the leaf, cadmium content is more than lead indicating that soil cadmium may be more available to tobacco and hence more readily absorbed by the plant than lead.     

Spatial Distribution and Correlative Study of the Total and the Available Heavy Metals in Soil From a Typical Lead Smelting Area,China

Representative soil samples (n = 453) were collected from a lead smelting area in central China. The total and the available contents of several hazardous elements, including lead, cadmium, arsenic and mercury were determined. Inorganic acid were used for the pretreatment of the total element analysis. DTPA (Diethylene triamine pentacetate acid) digestion, an effective pretreatment procedure for the biological availability assessment of heavy metals, was used for bio-available assessment in this study. Graphite furnace atomic absorption spectrometry (GFAAS), inductively coupled plasma-optical emission spectrometer (ICP-OES) and inductively coupled plasma-mass spectrometry (ICP-MS) were employed for the instrumental analysis. The results indicated that the soil samples were seriously polluted by mercury, arsenic, lead and cadmium around the smelting factories, comparing to many other cities in China. Spatial distributions of the metal contents were then illustrated with maps. For 220 samples in pollution areas, average bio-effectiveness rates of cadmium, lead, mercury and arsenic in soils were 25.9%, 17.2%, 0.58% and 0.11%, respectively. The relationships of the total and the available contents of metals were investigated, among which lead and cadmium were found to can be expressed as linear and power function. These equations were tested inversely and further verified by the data from six randomly selected sites. The results will be helpful to assess the bioavailable contents of lead and cadmium fast and accurately only by the total contents and functional calculation in similar study.     

Chemical Extraction of Arsenic and Heavy Metals from Contaminated Soils Under High Temperature and Pressure Conditions in Abandoned Mines in South Korea

The chemical extraction of As and heavy metals from contaminated soils, sampled from the Geopoong and Keumpoong mines in South Korea, was investigated under subcritical conditions. Soil samples from the abandoned mines were heavily contaminated with As, Cd, Cu, Pb, and Zn. The extent of metal removed from the contaminated soils by extractants varied according to the chemical forms of the metals in the soils. When temperature increased, the extraction of As increased accordingly, showing 92-100% removal with 100 mM of NaOH at 300°C. In contrast, the extraction of cationic metals by citric acid and ethylenediaminetetraacetic acid (EDTA) decreased markedly at 200–300°C because their chelating ability was decreased via decarboxylation and dehydration at high temperatures. Furthermore, the extraction of cationic metals was significantly affected by solution pH. Our results suggest that chemical extraction of cationic metals under subcritical conditions may be affected by several factors, including character of metal, type of extracting reagent, existing forms of metal in the soil, temperature, and soil pH.     

Enhanced phytoextraction: II. Effect of EDTA and citric acid on heavy metal uptake by Helianthus annuus from a calcareous soil

High biomass producing plant species, such as Helianthus annuus, have potential for removing large amounts of trace metals by harvesting the aboveground biomass if sufficient metal concentrations in their biomass can be achieved However, the low bioavailability of heavy metals in soils and the limited translocation of heavy metals to the shoots by most high biomass producing plant species limit the efficiency of the phytoextraction process. Amendment of a contaminated soil with ethylene diamine tetraacetic acid (EDTA) or citric acid increases soluble heavy metal concentrations, potentially rendering them more available for plant uptake. This article discusses the effects of EDTA and citric acid on the uptake of heavy metals and translocation to aboveground harvestable plant parts in Helianthus annuus. EDTA was included in the research for comparison purposes in our quest for less persistent alternatives, suitable for enhanced phytoextraction. Plants were grown in a calcareous soil moderately contaminated with Cu, Pb, Zn, and Cd and treated with increasing concentrations of EDTA (0.1, 1, 3, 5, 7, and 10 mmol kg(-1) soil) or citric acid (0.01, 0.05, 0.25, 0.442, and 0.5 mol kg(-1) soil). Heavy metal concentrations in harvested shoots increased with EDTA concentration but the actual amount of phytoextracted heavy metals decreased at high EDTA concentrations, due to severe growth depression. Helianthus annuus suffered heavy metal stress due to the significantly increased bioavailable metal fraction in the soil. The rapid mineralization of citric acid and the high buffering capacity of the soil made citric acid inefficient in increasing the phytoextracted amounts of heavy metals. Treatments that did not exceed the buffering capacity of the soil (< 0.442 mol kg(-1) soil) did not result in any significant increase in shoot heavy metal concentrations. Treatments with high concentrations resulted in a dissolution of the carbonates and compaction of the soil. These physicochemical changes caused growth depression of Helianthus annuus. EDTA and citric acid added before sowing of Helianthus annuus did not appear to be efficient amendments when phytoextraction of heavy metals from calcareous soils is considered.     

Enhanced phytoextraction: I. Effect of EDTA and citric acid on heavy metal mobility in a calcareous soil

Phytoextraction, the use of plants to extract heavy metals from contaminated soils, could be an interesting alternative to conventional remediation technologies. However, calcareous soils with relatively high total metal contents are difficult to phytoremediate due to low soluble metal concentrations. Soil amendments such as ethylene diaminetetraacetate (EDTA) have been suggested to increase heavy metal bioavailability and uptake in aboveground plant parts. Strong persistence of EDTA and risks of leaching of potentially toxic metals and essential nutrients have led to research on easily biodegradable soil amendments such as citric acid. In our research, EDTA is regarded as a scientific benchmark with which degradable alternatives are compared for enhanced phytoextraction purposes. The effects of increasing doses of EDTA (0.1,1,10 mmol kg(-1) dry soil) and citric acid (0.01, 0.05, 0.25, 0.442, 0.5 mol kg(-1) dry soil) on bioavailable fractions of Cu, Zn, Cd, and Pb were assessed in one part of our study and results are presented in this article. The evolution of labile soil fractions of heavy metals over time was evaluated using water paste saturation extraction (approximately soluble fraction), extraction with 1 M NH4OAc at pH 7 (approximately exchangeable fraction), and extraction with 0.5 M NH4OAc + 05 M HOAc + 0.02 M EDTA at pH 4.65 (approximately potentially bioavailable fraction). Both citric acid and EDTA produced a rapid initial increase in labile heavy metal fractions. Metal mobilization remained constant in time for soils treated with EDTA, but a strong exponential decrease of labile metal fractions was noted for soils treated with citric acid. The half life of heavy metal mobilization by citric acid varied between 1.5 and 5.7 d. In the following article, the effect of heavy metal mobilization on uptake by Helianthus annuus will be presented.     

Heavy metals (Cd, Pb, Zn, Ni, Cu and Cr(III)) removal from water in Malaysia: post treatment by high quality limestone

This paper presents the results of research on heavy metals removal from water by filtration using low cost coarse media which could be used as an alternative approach to remove heavy metals from water or selected wastewater. A series of batch studies were conducted using different particle media (particle size 2.36-4.75 mm) shaken with different heavy metal solutions at various pH values to see the removal behaviour for each metal. Each solution of cadmium (Cd), lead (Pb), zinc (Zn), nickel (Ni), copper (Cu) and chromium (Cr(III)) with a concentration of 2 mg/L was shaken with the media. At a final pH of 8.5, limestone has significantly removed more than 90% of most metals followed by 80% and 65% removals using crushed bricks and gravel, respectively. The removal by aeration and settlement methods without solid media was less than 30%. Results indicated that the removal of heavy metals was influenced by the media and not directly by the pH. Investigations on the removal behaviour of these metals indicated that rough solid media with the presence of carbonate were beneficial for the removal process. Adsorption and precipitation as metals oxide and probably as metals carbonate were among the two mechanisms that contributed to the removal of metals from solution.     

Kinetics of soil cadmium desorption under simulated acid rain

Soil acidification can result in the release of heavy metals stabilized by soil components into soil solution, and therefore it causes ecological risk. The kinetics of Cd desorption from two Chinese soils (ultisol and oxisol) distributed in the acid rain sensitive areas of southern China, were studied using a flow-stirred method under simulated acid rain conditions. Cd desorption was well described by the first-order kinetic equation. Percentages of Cd desorbed were 80–99% in ultisol and 25–28% in oxisol, respectively. Cd desorption, regarded as a heterogeneous diffusion in soils, could be also fitted by the Elovich equation. The desorption process could be divided into a fast reaction and a slow reaction, which were corresponded to the exchangeable and the specific sorbed Cd, respectively. The obtained results are essential to understand the process of heavy metal release under acid deposition conditions and to evaluate the ecological risk of acid deposition in those acid rain sensitive areas of China.     

The influence of heavy metals upon the growth of sitka-spruce in South Wales forests

Summary Experiments on sitka-spruce seedlings grown in acidic peaty gley soils under green-house conditions, where the soils where doped with increasing amounts of Cd, Cu and Pb up to maximum levels of metal added of 16 ppm, 32 ppm and 400 ppm respectively, showed that the levels of Cd and Pb in shoots and roots increased with increasing levels in the soil, whereas levels of copper appeared to be independent. The addition of these three metals to the soils did not influence the uptake of other heavy metals, or of the nutrients potassium or calcium. Increases in the shoot cadmium levels significantly reduced the yields of the plant shoots. However, the plant yields were only affected by the highest level of lead that was added to the soil (400 ppm Pb) and unaffected by all the copper treatments (0–32 ppm Cu in the soil). The lengths of the sitka-spruce roots were reduced when cadmium and lead levels in the soil exceeded certain threshold concentrations (2.5 ppm total Cd, where 0.3 ppm was extractable with 0.5 M acetic acid; and 48 ppm total Pb, where 1.7 ppm was extractable). However, root lengths were not reduced by copper. This was probably related to the fact that copper appears to be relatively unavailable in the type of soil used, as only 1.1. ppm Cu was extractable from a total of 32 ppm Cu added. Root branching was apparently reduced by increases in the soil levels of cadmium, copper and lead. The roots of some control plants had symbiotic mycorrhizal associations (4 out of 19 plants), whereas the roots of all the plants grown in the soils with added heavy metals did not develop these.     

Removal of heavy metals from contaminated sewage sludge using Aspergillus niger fermented raw liquid from pineapple wastes

The environmental benefits derived from using citric acid in the removal of heavy metals from contaminated sewage sludge have made it promising as an extracting agent in the chemical extraction process. At present, citric acid is produced commercially by fermentation of sucrose using mutant strains of Aspergillus niger (A. niger), and chemical synthesis. In recent years, various carbohydrates and wastes (such as pineapple wastes) have been considered experimentally, to produce citric acid by A. niger. This study investigated the potential of using A. niger fermented raw liquid from pineapple wastes as a source of citric acid, in extracting chromium (Cr), copper (Cu), lead (Pb), nickel (Ni) and zinc (Zn) from anaerobically digested sewage sludge. Results of the study revealed that metal removal efficiencies varied with pH, forms of metals in sludge and contact time. At pH approaching 4, and contact time of 11 days, A. niger fermented liquid seemed to remove all Cr and Zn while removing 94% of Ni. Moreover, chemical speciation studies revealed that metals which are predominantly in the exchangeable and oxidizable phases seemed to exhibit ease of leachability (e.g., Zn). The by-products of the process such as pineapple pulp and mycelium which are rich in protein, can still be used as animal feed. It can be said therefore that this novel process provides a sustainable way of managing contaminated sewage sludge.     

Use of Energy Crop (Ricinus communis L.) for Phytoextraction of Heavy Metals Assisted with Citric Acid

Ricinus communis L. is a bioenergetic crop with high-biomass production and tolerance to cadmium (Cd) and lead (Pb), thus, the plant is a candidate crop for phytoremediation. Pot experiments were performed to study the effects of citric acid in enhancing phytoextraction of Cd/Pb by Ricinus communis L. Citric acid increased Cd and Pb contents in plant shoots in all treatments by about 78% and 18–45%, respectively, at the dosage of 10 mM kg^?1 soil without affecting aboveground biomass production. Addition of citric acid reduced CEC, weakened soil adsorption of heavy metals and activated Cd and Pb in soil solutions. The acid-exchangeable fraction (BCR-1) of Pb remained lower than 7% and significantly increased with citric acid amendment. Respective increases in soil evaluation index induces by 14% and 19% under the Cd1Pb50 and Cd1Pb250 treatments upon addition of citric acid resulted in soil quality improvement. Ricinus communis L. has great potential in citric acid-assisted phytoextraction for Cd and Pb remediation.     

Biosorption of lead, cadmium, and zinc by Citrobacter strain MCM B-181: characterization studies

The biosorption process for removal of lead, cadmium, and zinc by Citrobacter strain MCM B-181, a laboratory isolate, was characterized. Effects of environmental factors and growth conditions on metal uptake capacity were studied. Pretreatment of biomass with chemical agents increased cadmium sorption efficiency; however, there was no significant enhancement in lead and zinc sorption capacity. Metal sorption by Citrobacter strain MCM B-181 was found to be influenced by the pH of the solution, initial metal concentration, biomass concentration, and type of growth medium. The metal sorption process was not affected by the age of the culture or change in temperature. Equilibrium metal sorption was found to fit the Langmuir adsorption model. Kinetic studies showed that metal uptake by Citrobacter strain MCM B-181 was a fast process, requiring <20 min to achieve >90% adsorption efficiency. The presence of cations reduced lead, zinc, and cadmium sorption to the extent of 11. 8%, 84.3%, and 33.4%, respectively. When biomass was exposed to multimetal solutions, metals were adsorbed in the order Co2+ < Ni2+ < Cd2+ < Cu2+ < Zn2+ < Pb2+. Among various anions tested, only phosphate and citrate were found to hamper metal sorption capacity of cells. Biosorbent beads prepared by immobilizing the Citrobacter biomass in polysulfone matrix exhibited high metal loading capacities. A new mathematical model used for batch kinetic studies was found to be highly useful in prediction of experimentally obtained metal concentration profiles as a function of time. Metal desorption studies indicated that Citrobacter beads could, in principle, be regenerated and reused in adsorption-desorption cycles. In an expanded scale trial, biosorbent beads were found to be useful in removal/recovery of metals such as lead from industrial wastewaters.     

乐安河—鄱阳湖湿地植物群落特征及其优势植物对重金属Cu、Pb、Cd的富集

选择乐安河—鄱阳湖湿地典型植物群落,采用重要值方法评价各样点植物群落特征并筛选出典型优势植物,通过室内理化测试分析不同生境中优势植物植株及其根区土壤中重金属Cu、Pb、Cd的含量;采用生物富集系数(BCF)方法评价不同优势植物对重金属Cu、Pb、Cd的富集特性。结果表明:研究区湿地植物以草本为主,在各样点共发现124种物种,包括蕨类植物2科2属2种,种子植物40科97属122种,并从中筛选出羊蹄、红蓼、鼠曲草、紫云英、苎麻等5种富集能力较强的优势植物;植物根区土壤中的Cu、Cd含量均超过土壤环境质量三级标准,而且Cu、Cd的最高含量分别为824.03、5.03 mg·kg-1;不同优势植物对Cu、Pb、Cd等3种重金属元素中的1种或2种表现出较强的富集能力,其中优势物种红蓼对Cu具有较强的富集能力,含Cu量最高为148.80 mg·kg-1,另一种优势物种鼠曲草对三种元素的生物富集系数均较高,且对Cd的最高富集含量为15.17 mg·kg-1,对Cd的生物富集系数最高值为19.14,高于其他植物10倍以上,鼠曲草对重金属Cd具有富集植物的基本特征,且对Cu和Cd具有共富集特征并具有较高的耐性,紫云英、羊蹄等对Cd的富集能力也较强。上述5种优势植物种群对鄱阳湖湿地Cu、Pb、Cd等重金属污染物的生态修复具有一定参考价值,可作为鄱阳湖湿地重金属污染修复植物的选择对象。