Growth-associated production of poly(hydroxybutyric acid) by Azotobacter beijerinckii from organic nitrogen substrates

Poly(hydroxybutyric acid) (PHB) was produced by a selectant of Azotobacter beijerinckii in media containing only organic nitrogen sources such as N substrates. The chosen compounds were casein peptone, yeast extract, casamino acids and urea, each combined with carbon substrates glucose or sucrose. The PHB was synthesized under growth-associated conditions. The concentrations amounted to more than 50% of cell dry mass on casein peptone/glucose as well as urea/glucose medium within 45 h fermentation time. Corresponding to these yields, productivities of about 0.8 g PHB l⁻¹ h⁻¹ were discovered. The highest values increased to 1.06 g PHB l⁻¹ h⁻¹ on casein peptone/glucose medium and 1.1 g PHB l⁻¹ h⁻¹ on yeast extract/glucose medium after a period of 20 h. It was found that oxygen limitation was essential for successful product formation, as demonstrated earlier. These data from basic research may support further investigations into the use of technical proteins from renewable sources as substrates for PHB production by a strain of A. beijerinckii. Received: 3 June 1997 / Received revision: 29 August 1997 / Accepted: 15 September 1997     

Poly-(3-hydroxybutyrate) production from whey by high-density cultivation of recombinant Escherichia coli

Recombinant Escherichia coli strain GCSC 6576, harboring a high-copy-number plasmid containing the Ralstonia eutropha genes for polyhydroxyalkanoate (PHA) synthesis and the E. coli ftsZ gene, was employed to produce poly-(3-hydroxybutyrate) (PHB) from whey. pH-stat fed-batch fermentation, using whey powder as the nutrient feed, produced cellular dry weight and PHB concentrations of 109 g l⁻¹ and 50 g l⁻¹ respectively in 47 h. When concentrated whey solution containing 210 g l⁻¹ lactose was used as the nutrient feed, cellular dry weight and PHB concentrations of 87 g l⁻¹ and 69 g l⁻¹ respectively could be obtained in 49 h by pH-stat fed-batch culture. The PHB content was as high as 80% of the cellular dry weight. These results suggest that cost-effective production of PHB is possible by fed-batch culture of recombinant E. coli using concentrated whey solution as a substrate. Received: 19 December 1997 / Received revision: 17 March 1998 / Accepted: 20 March 1998     

A novel animal-component-free medium for rabies virus production in Vero cells grown on Cytodex 1 microcarriers in a stirred bioreactor

Vero cells growth and rabies production in IPT-AF medium, a property animal-component-free medium are described in this work. Kinetics of cell growth and rabies virus (strain LP 2061) production were first conducted in spinner flasks. Over eight independent experiments, Vero cell growth in IPT-AF medium, on 2 g/l Cytodex 1 was consistent. An average Cd (cell division number) of 3.3 ± 0.4 and a specific growth rate μ of 0.017 ± 0.006 h⁻¹ were achieved. Such performances were comparable to those obtained in serum-containing medium (MEM + 10% FCS). Rabies virus production on Vero cells in IPT-AF medium was also optimised in spinner flasks. The effects of multiplicity of infection (MOI), regulation of glucose level at 1 g/l and cell washing step, were investigated. The highest virus titer was achieved when the cells were infected at an MOI of 0.1; this level was equal to 10⁷ FFU/ml. The step of medium exchange before cell infection can be omitted; nevertheless in this case glucose level should be maintained at 1 g/l to avoid a decrease of specific virus productivity. Process optimisation in a 2-l stirred bioreactor pointed out that the aeration mode was the prominent parameter that affected cell growth in IPT-AF medium and on Cytodex 1 microcarriers. An acceptable level of cell density (cell density level of 1.5 × 10⁶ cells/ml) was achieved when cells were grown in batch mode and using headspace aeration. Nevertheless, this aeration mode is not optimal for large-scale culture. The addition of Pluronic F68 at 0.1% at 24 h post inoculation as well as the switch from surface aeration mode to the sparged mode, 2 days after the start of the culture, had markedly improved cell growth performance. A cell density level of 5.5 × 10⁶ cells/ml was reached when cells were grown in a 2-l bioreactor, on 3 g/l Cytodex 1 in IPT-AF medium and using the recirculation culture mode. Cell infection at an MOI of 0.1 and using perfused culture, resulted in a maximal virus titer of 3.5 × 10⁷ FFU/ml. The activity of the pooled inactivated rabies virus harvests showed a protective activity that meets WHO requirements.     

High-density Escherichia coli cultures for continuous l(−)-carnitine production

The use of a biological procedure for l-carnitine production as an alternative to chemical methods must be accompanied by an efficient and highly productive reaction system. Continuous l-carnitine production from crotonobetaine was studied in a cell-recycle reactor with Escherichia coli O44 K74 as biocatalyst. This bioreactor, running under the optimum medium composition (25 mM fumarate, 5 g/l peptone), was able to reach a high cell density (26 g dry weight/l) and therefore to obtain high productivity values (6.2 g l-carnitine l⁻¹ h⁻¹). This process showed its feasibility for industrial l-carnitine production. In addition, resting cells maintained in continuous operation, with crotonobetaine as the only medium component, kept their biocatalytic capacity for 4 days, but the biotransformation capacity decreased progressively when this particular method of cultivation was used. Received: 10 December 1998 / Received revision: 19 February 1999 / Accepted: 20 February 1999     

Guggulsterone production in cell suspension cultures of the guggul tree, <Emphasis Type="Italic">Commiphora wightii</Emphasis>, grown in shake-flasks and bioreactors

Cell suspension cultures of Commiphora wightii, grown in modified MS medium containing 2,4-dichlorophenoxyacetic acid (0.5 mg l⁻¹) and kinetin (0.25 mg l⁻¹), produced ∼5 μg guggulsterone g⁻¹ dry wt. In a 2 l stirred tank bioreactor, the biomass was 5.5 g l⁻¹ and total guggulsterone was 36 μg l⁻¹.     

Production of polyhydroxybutyrate by Ralstonia eutropha from protein hydrolysates

Polyhydroxybutyrate (PHB) was produced by Ralstonia eutropha DSM 11348 (formerly Alicaligenes eutrophus) in media containing 20–30 g l⁻¹ casein peptone or casamino acids as sole sources of nitrogen. In fermentations using media based on casein peptone, permanent growth up to a cell dry mass of 65 g l⁻¹ was observed. PHB accumulated in cells up to 60%–80% of dry weight. The lowest yields were found in media without any trace elements or with casamino acids added only. The residual cell dry masses were limited to 10–15 g l⁻¹ and did not contain PHB. The highest productivity amounted to 1.2 g PHB l⁻¹ h⁻¹. The mean molecular mass of the biopolymer was determined as 750 kDa. The proportion of polyhydroxyvalerate was less than 0.2% in PHB. The bioprocess was scaled up to a 300-l plant. During a fermentation time of 39 h the cells accumulated PHB to 78% w/w. The productivity was 0.98 g PHB l⁻¹ h¹. Received: 8 July 1998 / Accepted: 26 August 1998     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant Escherichia coli arcA mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the ‘one-factor-at-a-time’ technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett–Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box–Wilson design. Under such optimized conditions (22.02 g l⁻¹ glycerol, 1.78 g l⁻¹ CAS, and 1.83 g l⁻¹ inoculum) microaerobic batch cultures gave rise to 8.37 g l⁻¹ CDW and 3.52 g l⁻¹ PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l⁻¹. After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l⁻¹, respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. An erratum to this article can be found at     

Reaction engineering studies for the production of 2-hydroxyisobutyric acid with recombinant Cupriavidus necator H 16

Recombinant Cupriavidus necator H 16 with a novel metabolic pathway using a cobalamin-dependent mutase was exploited to produce 2-hydroxyisobutyric acid (2-HIBA) from renewable resources through microbial fermentation. 2-HIBA production capacities of different strains of C. necator H 16 deficient in the PHB synthase gene and genetically engineered to enable the production of 2-HIBA from the intracellular PHB precursor (R)-3-hydroxybutyryl-CoA were evaluated in 48 parallel milliliter-scale stirred tank bioreactors (V = 11 mL). The effects of media composition, limitations, pH, and feed rate were studied with respect to the overall process performances of the different recombinant strains. 2-HIBA production was at a maximum at nitrogen limiting conditions and if the pH was controlled between 6.8 and 7.2 under fed-batch operating conditions (intermittent fructose addition). The final concentration of 2-HIBA was 7.4 g L⁻¹ on a milliliter scale. Best reaction conditions identified on the milliliter scale were transferred to a laboratory-scale fed-batch process in a stirred tank bioreactor (V = 2 L). Two different process modes for the production of 2-HIBA, a single-phase and a dual-phase fermentation procedure, were evaluated and compared on a liter scale. The final concentration of 2-HIBA was 6.4 g L⁻¹ on a liter scale after 2 days of cultivation.     

Rosmarinic acid production by Lavandula vera MM cell-suspension culture

The time courses of growth and rosmarinic acid production by Lavandula vera MM cell suspension were investigated. The uptake of the main nutrients (sucrose, nitrogen, phosphorus, K, Ca, Mg) was followed during cultivation and the data on the physiology of the L. vera MM cell culture are presented. It was established that the cell culture synthesizes rosmarinic acid during the linear phase of growth for a relatively short period (between the 4th and 8th days of cultivation). The influence of sucrose concentration in the nutrient medium on cell growth and accumulation of rosmarinic acid by L. vera MM cell culture was investigated. The results showed that 7% sucrose in the nutrient medium ensured a steady growth of the cell suspension and increased the yield of rosmarinic acid (29.2 g/l dry biomass and 507.5 mg/l rosmarinic acid compared to 13.0 g/l dry biomass and 68.6 mg/l rosmarinic acid for the control cultivation with 3% sucrose). Received: 17 September 1996 / Received revision: 31 January 1997 / Accepted: 1 February 1997     

Molecular mass of poly[(R )-3-hydroxybutyric acid] produced in a recombinant Escherichia coli

 Poly[(R)-3-hydroxybutyric acid] (PHB) was produced at 37 °C by a recombinant Escherichia coli harboring the Alcaligenes eutrophus biosynthesis phbCAB genes in Luria-Bertani media containing glucose at 10–30 g/l at different pH values and the time-dependent changes in the molecular mass of PHB were studied. PHB polymers accumulated within cells while glucose was present in the medium. The number-average molecular mass of PHB decreased with time during the course of PHB accumulation, and the values for PHB were markedly dependent on the cultivation conditions of the E. coli, ranging from 0.5 MDa to 20 MDa. Under specific conditions (pH 6.0), E. coli produced PHB with an extremely high molecular mass (20 MDa). It has been suggested that a chain-transfer agent is generated in E. coli cells during the accumulation of PHB. Received: 18 July 1996 / Received revision: 4 November 1996 / Accepted: 4 November 1996     

Production of sophorolipids from whey: development of a two-stage process with Cryptococcus curvatus ATCC 20509 and Candida bombicola ATCC 22214 using deproteinized whey concentrates as substrates

In order to produce sophorolipids from whey, thereby lowering the lactose content and biological oxygen demand, a two-step batch cultivation process was developed including medium sterilization by filtration. In the first step, whey was sterilized by a combination of crossflow and sterile filtration. Because the sophorolipid-producing yeast Candida bombicola ATCC 22214 was not able to use lactose as a carbon source directly, the oleaginous yeast Cryptococcus curvatus ATCC 20509 was grown on deproteinized whey concentrates (DWC). With 1: 1 diluted DWC-20, lactose was consumed as the carbon source and biomass (24 g/l dry weight content) as well as single-cell oil (SCO, 10 g/l) were produced. The cultivation broth was disrupted with a glass bead mill and it served as medium for growth (29 g cell dry mass/l) and sophorolipid production (12 g/l) of the yeast C. bombicola. Received: 29 July 1998 / Received revision: 5 October 1998 / Accepted: 11 October 1998     

Large-scale growth and taxane production in cell cultures of Taxus cuspidata (Japanese yew) using a novel bioreactor

 A novel type of bioreactor was successfully developed for the production of taxol and its precursors by culturing cells of Taxus cuspidata (Japanese yew) on a pilot-scale. Rapidly growing cell lines were selected from callus cultures derived from immature embryos of yew. The cells were inoculated in 20-l capacity bioreactors of different types to test the growth performance. The models of small-scale bioreactors incorporated in this study included a balloon-type bubble bioreactor (BTBB), a bubble-column bioreactor (BCB), a BCB with a split-plate internal loop, a BCB with a concentric draught-tube internal loop, a BCB with a fluidized bed bioreactor, and two different models of stirred tank reactors. Among the reactors, BTBB appeared to be the most efficient in promoting cell growth. The doubling time of cell growth in BTBB was 12 days with a 30% inoculation cell density. The optimum time for medium replacement or feeding was 12–15 days after inoculation as determined by monitoring both the levels of sugars and medium conductivity. When yew tree cells were grown in different sizes (100–500-l) of BTBBs, more than 70% cell viability was recorded at the time of harvest. The growth pattern of the cells in the pilot-scale BTBB appeared to be the same as that of cells in the 20-l bioreactors. Approximately 3 mg/l of taxol and 74 mg/l total taxanes were obtained after 27 days of culture. Received: 6 April 1999 / Revision received: 23 August 1999 / Accepted: 31 August 1999     

Production of poly-β-hydroxybutyrate (PHB) by <Emphasis Type="Italic">Alcaligenes latus</Emphasis> from maple sap

Maple sap, an abundant natural product especially in Canada, is rich in sucrose and thus may represent an ideal renewable feedstock for the production of a wide variety of value-added products. In the present study, maple sap or sucrose was employed as a carbon source to Alcaligenes latus for the production of poly-β-hydroxybutyrate (PHB). In shake flasks, the biomass obtained from both the sap and sucrose were 4.4 ± 0.5 and 2.9 ± 0.3 g/L, and the PHB contents were 77.6 ± 1.5 and 74.1 ± 2.0%, respectively. Subsequent batch fermentation (10 L sap) resulted in the formation of 4.2 ± 0.3 g/L biomass and a PHB content of 77.0 ± 2.6%. The number average molecular weights of the PHB produced by A. latus from maple sap and pure sucrose media were 300 ± 66 × 10³ and 313 ± 104 × 10³ g/mol, respectively. Near-infrared, ¹H magnetic resonance imaging (MRI), and ¹³C-MRI spectra of the microbially produced PHB completely matched those obtained with a reference material of poly[(R)-3-hydroxybutyric acid]. The polymer was found to be optically active with [α]²⁵ _D equaled to −7.87 in chloroform. The melting point (177.0°C) and enthalpy of fusion (77.2 J/g) of the polymer were also in line with those reported, i.e., 177°C and 81 J/g, respectively.     

Improvement of ferulic acid bioconversion into vanillin by use of high-density cultures of Pycnoporus cinnabarinus

High-density cultures of Pycnoporus cinnabarinus were tested with a view to optimisation of ferulic acid bioconversion into vanillin. The dry weight was increased fourfold by using glucose, fructose or a mixture of glucose and phospholipids as carbon source instead of maltose, the carbon source previously used. 5 mmol l⁻¹ vanillin, i.e. 760 mg l⁻¹, was produced over 15 days with glucose-phospholipid medium. In contrast, formation of vanillin was lower using glucose or fructose compared to the maltose control. A bioreactor (2 l) with a glucose-phospholipid medium gave a molar yield of vanillin of 61% (4 mmol l⁻¹). An alternative strategy was to grow the fungus on a glucose or fructose medium for 3 days, then switch to maltose during the bioconversion phase: this method allowed 3.3 mmol l⁻¹ vanillin to be obtained in 10 days. Many by-products such as methoxyhydroquinone and vanillyl alcohol were also produced. Received: 19 February 1999 / Received revision: 4 June 1999 / Accepted: 4 June 1999     

Optimization of the hydroxylation of 2-cyclopentylbenzoxazole with Cunninghamella blakesleeana DSMZ 1906

Biohydroxylation of 2-cyclopentyl-1,3-benzoxazole with the filamentous fungus Cunninghamella blakesleeana DSMZ 1906 was studied in a 15-l stirred tank reactor. The aim of the work was to avoid substrate limitation through sub-optimal mixing by formation of pellets with a uniform pellet size distribution of 250–500 μm, obtained at an inoculum concentration of 10⁷ spores ml⁻¹ and an agitation rate of 390 rpm. Due to the high toxicity of the educt, 2-cyclopentyl-1,3-benz- oxazole, on the fungus, the medium composition, the time of educt addition, and the educt starting concentration were optimized to reach high educt tolerance and hydroxylation activity. A good maintenance of biotransformation capacity was obtained without excessive loss of activity of the biocatalyst by addition of 30 mg 2-cyclopentyl-1,3-benzoxazole/g biomass (cell dry mass) during the stationary phase in a medium which was optimized in batch fermentations with experimental designs. An increase in product yield and quality (enantiomeric excess) was achieved by developing feeding strategies combining the educt and medium components. The resulting fermentation broth contained 450 mg l⁻¹ of the product (1S,3S)-3-(benz-1,3-oxazol- 2-yl)cyclopentan-1-ol with an enantiomeric excess of 95%, which represents a 48% increase over former reported results. Received: 8 July 1999 / Accepted: 2 October 1999     

Benzene/toluene/p-xylene degradation. Part I. Solvent selection and toluene degradation in a two-phase partitioning bioreactor

A two-phase organic/aqueous reactor configuration was developed for use in the biodegradation of benzene, toluene and p-xylene, and tested with toluene. An immiscible organic phase was systematically selected on the basis of predicted and experimentally determined properties, such as high boiling points, low solubilities in the aqueous phase, good phase stability, biocompatibility, and good predicted partition coefficients for benzene, toluene and p-xylene. An industrial grade of oleyl alcohol was ultimately selected for use in the two-phase partitioning bioreactor. In order to examine the behavior of the system, a single-component fermentation of toluene was conducted with Pseudomonas sp. ATCC 55595. A 0.5-l sample of Adol 85 NF was loaded with 10.4 g toluene, which partitioned into the cell containing 1 l aqueous medium at a concentration of approximately 50 mg/l. In consuming the toluene to completion, the organisms were able to achieve a volumetric degradation rate of 0.115 g l⁻¹ h⁻¹. This system is self-regulating with respect to toluene delivery to the aqueous phase, and requires only feedback control of temperature and pH. Received: 16 November 1998 / Received revision: 28 March 1999 / Accepted: 9 April 1999     

Effect of soybean oil and glucose on sophorose lipid fermentation by Torulopsis bombicola in continuous culture

The effect of soybean oil and glucose on the growth of Torulopsis bombicola and sophorose lipid production in continuous culture was investigated. As the dilution rate in 100 g/l glucose and 100 g/l soybean oil medium was increased, the dry cell weight and sophorose lipid concentration decreased. Sophorose lipid productivity, however, was maximum at a dilution rate of 0.03 h⁻¹. The cell yield from glucose and the sophorose lipid production from soybean oil were approximately constant regardless of the dilution rate. The specific consumption rate of soybean oil was closely related to the specific production rate of sophorose lipid. These results suggest that soybean oil was used only for sophorose lipid production whereas glucose was used only for cell mass and maintenance. When the soybean oil concentration was varied at fixed dilution rate in 100 g/l glucose medium, a high concentration of soybean oil was found to inhibit sophorose lipid production. Received: 9 January 1997 / Received revision: 5 March 1997 / Accepted: 13 April 1997     

A process for the production of ectoine and poly(3-hydroxybutyrate) by <Emphasis Type="Italic">Halomonas boliviensis</Emphasis>

The paper reports a study involving the use of Halomonas boliviensis, a moderate halophile, for co-production of compatible solute ectoine and biopolyester poly(3-hydroxybutyrate) (PHB) in a process comprising two fed-batch cultures. Initial investigations on the growth of the organism in a medium with varying NaCl concentrations showed the highest level of intracellular accumulation of ectoine (0.74 g L⁻¹) at 10–15% (w/v) NaCl, while at 15% (w/v) NaCl, the presence of hydroxyectoine (50 mg L⁻¹) was also noted. On the other hand, the maximum cell dry weight and PHB concentration of 10 and 5.8 g L⁻¹, respectively, were obtained at 5–7.5% (w/v) NaCl. A process comprising two fed-batch cultivations was developed—the first culture aimed at obtaining high cell mass and the second for achieving high yields of ectoine and PHB. In the first fed-batch culture, H. boliviensis was grown in a medium with 4.5% (w/v) NaCl and sufficient levels of monosodium glutamate, NH₄⁺, and PO₄³⁻. In the second fed-batch culture, the NaCl concentration was increased to 7.5% (w/v) to trigger ectoine synthesis, while nitrogen and phosphorus sources were fed only during the first 3 h and then stopped to favor PHB accumulation. The process resulted in PHB yield of 68.5 wt.% of cell dry weight and volumetric productivity of about 1 g L⁻¹ h⁻¹ and ectoine concentration, content, and volumetric productivity of 4.3 g L⁻¹, 7.2 wt.%, and 2.8 g L⁻¹ day⁻¹, respectively. At salt concentration of 12.5% (w/v) during the second cultivation, the ectoine content was increased to 17 wt.% and productivity to 3.4 g L⁻¹ day⁻¹.     

Optimizing conditions for poly(β-hydroxybutyrate) production by <Emphasis Type="Italic">Halomonas boliviensis</Emphasis> LC1 in batch culture with sucrose as carbon source

Halomonas boliviensis LC1 is able to accumulate poly(β-hydroxybutyrate) (PHB) under conditions of excess carbon source and depletion of essential nutrients. This study was aimed at an efficient production of PHB by growing H. boliviensis to high cell concentrations in batch cultures. The effect of ammonium, phosphate, and yeast extract concentrations on cell concentration [cell dry weight (CDW)] and PHB content of H. boliviensis cultured in shake flasks was assayed using a factorial design. High concentrations of these nutrients led to increments in cell growth but reduced the PHB content to some extent. Cultivations of H. boliviensis under controlled conditions in a fermentor using 1.5% (w/v) yeast extract as N source, and intermittent addition of sucrose to provide excess C source, resulted in a polymer accumulation of 44 wt.% and 12 g l⁻¹ CDW after 24 h of cultivation. Batch cultures in a fermentor with initial concentrations of 2.5% (w/v) sucrose and 1.5% (w/v) yeast extract, and with induced oxygen limitation, resulted in an optimum PHB accumulation, PHB concentration and CDW of 54 wt.%, 7.7 g l⁻¹ and 14 g l⁻¹, respectively, after 19 h of cultivation. The addition of casaminoacids in the medium increased the CDW to 14.4 g l⁻¹ in 17 h but reduced the PHB content in the cells to 52 wt.%.     

Agrobacterium-mediated genetic transformation of a phalaenopsis orchid

 Genetically transformed plants of a phalaenopsis orchid [Doritaenopsis Coral Fantasy×Phalaenopsis (Baby Hat×Ann Jessica)] were regenerated after cocultivation of cell clumps with Agrobacterium tumefaciens strains LBA4404 (pTOK233) and EHA101 (pIG121Hm) that harbored genes for β-glucuronidase (GUS) and hygromycin resistance. The efficiency of transformation was markedly increased by 10 h cocultivation of cell clumps with A. tumefaciens that had been induced with 200 μm acetosyringone, and by inclusion of 500 μm acetosyringone in the cocultivation medium. Hygromycin-resistant cell clusters (0.5–3 mm in diameter) were selected from the infected cell clumps after 4–6 weeks of culture on agar (8 g/l)-solidified new Dogashima medium (NDM) containing 20 g/l sucrose, 0.1 mg/l naphthaleneacetic acid, 1.0 mg/l benzyladenine (BA), 50 mg/l hygromycin and 300 mg/l cefotaxime. The cell clusters proliferated 4 weeks after transfer onto the same medium. To induce callus greening, the carbon source was changed from sucrose to maltose. The green calli obtained produced protocorm-like bodies (PLBs) after 4 weeks of culture on phytohormone-free NDM medium. Regeneration of transgenic plantlets was enhanced by incubating PLBs on NDM medium supplemented with 0.1 mg/l abscisic acid, followed by partial desiccation for 10–30 min. Successful transformation was confirmed by histochemical GUS assay, PCR analysis and Southern hybridization of transformants. With this transformation system, more than 100 hygromycin-resistant phalaenopsis plantlets were produced about 7 months following infection of the cell aggregates. Received: 10 November 1998 / Revision received: 4 June 1999 / Accepted: 22 June 1999