Characterization of pyrolysin, a hyperthermoactive serine protease from the archaebacterium Pyrococcus furiosus

Abstract From the hyperthermophilic archaebacterium Pyrococcus furiosus an oxygen-stable, extremely thermostable protease activity, which we designate pyrolysin, has been identified and characterized. Pyrolysin is a cell-envelope associated protease activity high thermo-activity and stability. The temperature optimum is 115°C and half-life values in the absence of substrate are: at least 96 h at 80°C, 9 h at 95°C, 4h at 100°C, 20 min at 105°C and 3 min at 110°C. Pyrolysin is active at a broad pH range between 6.5 and 10.5, and was classified as a serine-type protease activity. Zymogram staining showed the presence of multiple protease bands of about 140, 130, 115, 100 and 65 kDa.     

Production of thermostable acid protease by Aspergillus niger

Aspergillus niger F2078 produces high levels of extracellular thermostable acid protease within 96 h. Although glucose and peptone were the best carbon and nitrogen sources, respectively, sucrose and a cheap nitrogen source, corn steep liquor, also gave satisfactory enzyme yields. Supplementation of groundnut meal to the basal medium enhanced enzyme production. Temperature and pH optima of the enzyme activity were 60°C and 3.0–4.0, respectively. The enzyme was stable between pH 3.0 and 6.0 and at temperatures up to 60°C.     

Characteristics of a highly thermostable neutral protease produced fromBacillus stearothermophilus

A highly thermostable neutral protease was found in culture filtrates ofBacillus stearothermophilus. The optimum reaction pH and temperature of this protease were 6.0 and 60°C, respectively, and 90% activity remained even after heat treatment at 90°C for 30 min. The protease was markedly inactivated by diisopropyl fluorophosphate, but EDTA and iodoacetic acid hardly affected it. The neutral protease therefore could be defined as a highly thermostable, neutral(-serine) protease.     

Characterization of a Thermostable α-Amylase from Bacillus licheniformis NCIB 6346

With one exception (NCIB 9668), the extracellular amylases from 10 strains of Bacillus licheniformis were thermostable and retained more than 98% of their original activity after incubation at 85°C for 60 min. The enzyme from B. licheniformis NCIB 6346 was purified 30-fold by ion-exchange chromatography and was characterized. It had an endo-action on starch yielding maltopentaose as the major product, and was identified as an α-amylase. The purified enzyme had a molecular weight of 62 650, was stable between pH 7 and 10 and was maximally active at 70-90°C at pH 7.0. It closely resembled commercial thermostable α-amylases in its general properties and it is concluded that B. licheniformis provides a good source of these enzymes.     

Production and characterization of a thermostable protease produced by an asporogenous mutant ofBacillus stearothermophilus

Summary An asporogenous mutant ofBacillus stearothermophilus (TPM-8) which produces 4-fold higher levels of a thermostable neutral protease than does wild-type strain 308-1 was obtained by mutagenesis with ethyl methanesulfonate. The protease produced by both the mutant and wild-type strain is a metalloprotease requiring Zn²⁺ and Ca²⁺ for activity and thermostability, respectively. It has a temperature optimum of 80°C at pH 7.0 and is highly thermostable, retaining 60% of its activity after 60 min at 85°C. The properties of the enzyme are similar to those of thermolysin.     

New Strains of Bacillus licheniformis and Bacillus coagulans producing Thermostable α-Amylase Active at Alkaline pH

Two species of Bacillus producing thermostable α-amylase with activity optima at alkaline pH are reported here. These organisms were isolated from soil and have been designated as Bacillus licheniformis CUMC 305 and B. coagulans CUMC 512. The enzymes released by these two species were partially purified up to about 81- and 72-fold respectively of the initial activity. The enzyme from B. licheniformis showed a wide temperature-range of activity, with optimum at 91°C. At this temperature it remained stable for 1 h. It retained 40–50% activity at 110°C and showed only 60% of its activity at 30°C. The enzyme showed a broad pH range of activity (4–10) retaining substantial activity on the alkaline side. The optimum pH was 9·5. The enzyme of B. coagulans showed activity up to 90°C, with optimum at 85°C and had a wide pH range with optimum at 7·5–8·5. The hydrolysis pattern of the substrate starch by these enzymes indicated that glucose, maltose, maltotriose and maltotetraose are the principal products rather than higher oligosaccharides.     

Purification and characterization of two types of alkaline serine proteases produced by an alkalophilic actinomycete

T sujibo , H., M iyamoto , K., H asegawa , T. & I namori , Y. 1990. Purification and characterization of two types of alkaline serine proteases produced by an alkalophilic actinomycete. Journal of Applied Bacteriology 69 , 520–529.
Two types of alkaline serine proteases were isolated from the culture filtrate of an alkalophilic actinomycete, Nocardiopsis dassonvillei OPC-210. The enzymes (protease I and protease II) were purified by acetone precipitation, DEAE-Sephadex A-50, CM-Sepharose CL-6B, Sephadex G-75 and phenyl-Toyopearl 650 M column chromatography. The purified enzymes showed a single band on sodium dodecyl sulphate polyacrylamide gel electrophoresis. The molecular weights of proteases I and II were 21000 and 36000, respectively. The pIs were 6.4 (protease I) and 3.8 (protease II). The optimum pH levels for the activity of two proteases were pH 10–12 (protease I) and pH 10.5 (protease II). The optimum temperature for the activity of protease I was 70°C and that for protease II was 60°C. Protease I was stable in the range of pH 4.0–8.0 up to 60°C and protease II was stable in the range of pH 6.0–12.0 up to 50°C.     

Optimization of culture conditions for the production of haloalkaliphilic thermostable protease from an extremely halophilic archaeon Halogeometricum sp. TSS101

AIMS: Isolation and screening of extreme halophilic archaeon producing extracellular haloalkaliphilic protease and optimization of culture conditions for its maximum production. METHODS AND RESULTS: Halogeometricum sp. TSS101 was isolated from salt samples and screened for the secretion of protease on gelatin and casein plates containing 20% NaCl. The archaeon was grown aerobically in a 250 ml flask containing 50 ml of (w/v) NaCl 20%; MgCl(2) 1%; KCl 0.5%; trisodium citrate 0.3%; and peptone 1%; pH 7.2 at 40 degrees C on rotary shaker. The production of enzyme was investigated at various pH, temperatures, NaCl concentrations, metal ions and different carbon and nitrogen sources. The partially purified protease had activity in a broad pH range (7.0-10.0) with optimum activity at pH 10.0 and a temperature (60 degrees C). The enzyme was thermostable and retained 70% initial activity at 80 degrees C. Maximum protease production occurred at 40 degrees C in a medium containing 20% NaCl (w/v) and 1% skim milk powder after 84 h in shaking culture. Enzyme secretion was observed at a broad pH range of 7.0-10.0. Addition of CaCl(2) (200 mmol) to the culture medium enhanced the production of protease. Protein rich flours proved to be cheap and good alternative source for enzyme production. Different osmolytes were tested for the growth and production of haloalkaliphilc protease and found that betaine and glycerol enhanced growth without secretion of the protease. Immobilization studies showed that whole cells immobilized in 2% alginate beads were stable up to 10 batches and able to secrete the protease, which attained maximum production within 60 h under shaking conditions. CONCLUSIONS: Halogeometricum sp. TSS101 secreted an extracellular haloalkaliphilic and thermostable protease. The optimum conditions required for maximum production are 20% NaCl, 1% skim milk powder and temperature at 40 degrees C. Addition of CaCl(2) (200 mmol) enhanced the enzyme production. Immobilization of whole cells in absence of NaCl proved to be useful for continuous production of haloalkaliphilic protease. SIGNIFICANCE AND IMPACT OF THE STudy: The low cost protein rich flours were used as an alternative carbon and nitrogen sources for enzyme production. Immobilization of halophilic cells in alginate beads can be used in continuous production of halophilic enzyme. The halophilic and thermostable protease from Halogeometricum sp. TSS101 is good source for industrial applications and can be a suitable source for preparation of fish sauce.     

Purification and characterization of a thermodynamic stable serine protease from Aspergillus fumigatus

A thermostable extracellular serine protease from Aspergillus fumigatus was purified 8.8-fold using a 4-step protocol. The enzyme was produced using a 36 h solid-state culture, had a molecular weight of 88 kDa and exhibited maximal enzyme activity at pH 7 and 60 °C. Structural analysis revealed that the protease is monomeric and non-glycosylated. Thermal inactivation of the pure enzyme followed first-order kinetics. The half-life (t_1/2) of the pure enzyme at 50, 60 and 70 °C was 65, 34 and 14 min, respectively. The denaturation and activation energies were 69 and 62 kJ mol⁻¹, respectively. Thermodynamic parameters (entropy and enthalpy) suggested that the protease was highly thermostable. This is the first report on the thermodynamic parameters of proteases produced by A. fumigatus.     

Toxicity of crude extracellular products of Aeromonas hydrophila in tilapia, Tilapianilotica

Extracellular products (ECP) secreted from Aeromonas hydrophila with haemolytic andproteolytic activity were studied with respect to temperature and time of incubation as well as thelethal toxicity on tilapia, Tilapia nilotica . The highest production of the haemolysin productwas achieved when Aer. hydrophila was grown at 35°C for 30 h. Tilapia erythrocytewas found to be more susceptible than sheep erythrocyte for determining the haemolytic activity.The haemolytic activity against tilapia erythrocyte was completely inactivated after heating theECP at 60°C for 10 min or 55°C for 15 min. The proteolytic activity was maximized whenthe bacterium was grown at 30°C for 36 h. Complete inactivation of the protease enzyme wasperformed after heating the ECP at 80°C for 10 min or 70°C for 15 min. Aeromonashydrophila was found to produce haemolytic and proteolytic exotoxin lethal to tilapia (LD₅₀ 2·1 × 10⁴ cell/fish), as well as heat stable unknown virulent factors thatwere responsible for 20% mortality. The lethality of ECP was decreased by heating andcompletely inactivated by boiling at 100°C for 10 min.     

一株产耐高温DNA 酶和蛋白水解酶的沙雷氏菌FS14 (Serratia sp. FS14) 的分离与鉴定

通过组织分离法从白术病害样品的茎秆部位分离到一株产红色色素的细菌FS14,参照《伯杰氏细菌鉴定手册》,根据其形态学特征、生理生化特性,同时结合16S rDNA序列分析结果,发现该菌属于沙雷氏菌属。研究还发现,从白术茎秆中分离到的这株中温型沙雷氏菌FS14能分泌耐高温的DNA酶和蛋白水解酶,甚至在100 oC预处理30 min后仍有活性。沙雷氏菌能分泌耐高温的DNA酶和蛋白水解酶还未见报道。     

Fermentation of cassava peels for the production of cellulolytic enzymes

Cassava peels were used as a substrate for the production of cellulolytic enzymes. Under solid substrate fermentation conditions and a Rhizopus sp., thermostable cellulolytic enzymes were produced. Optimal production temperature and pH were 45°C and 5.6 respectively. Kinetic studies of the enzymes showed that the cellulase C₁ activity was optimal at pH 5.0 and 50°C, whereas that of cellulase C_x was optimal at pH 7.0 and 60°C. The enzymes degraded ca 44% of sorghum grains in 6 h, thus suggesting a possible use in saccharification processes. The results also showed the possibility of re-cycling cassava peels as a cheap substrate for the enzyme industry. and accepted 6 June 1989     

An extracellular--pepstatin insensitive acid protease produced by Thermoplasma volcanium

In this study, some parameters for the production and caseinolytic activity of an extracellular thermostable acid protease from a thermoacidophilic archaeon Thermoplasma volcanium were determined. The highest level of growth and enzyme production were detected at pH 3.0 over an incubation period of 192 h at 60 degrees C. The pH optimum for the acid protease activity was 3.0 and the enzyme was fairly stable over a broad pH range (pH 3.0-8.0). The temperature for maximum activity of the enzyme was 55 degrees C and activity remained stable between 50 degrees C and 70 degrees C. These features could be of relevance for various biotechnological applications of this enzyme. Serine-(PMSF), cysteine-(DTT), metallo-(EDTA) and aspartate-(pepstatin) protease inhibitors did not inhibit the caseinolytic activity of the enzyme. Therefore, Tp. volcanium acid protease could be a member of the pepstatin-insensitive carboxyl proteinases.     

Purification and characterization of two thermostable proteases from the thermophilic fungus Chaetomium thermophilum

Thermostable protease is very effective to improve the industrial processes in many fields. Two thermostable extracellular proteases from the culture supernatant of the thermophilic fungus Chaetomium thermophilum were purified to homogeneity by fractional ammonium sulfate precipitation, ion-exchange chromatography on DEAE-Sepharose, and PhenylSepharose hydrophobic interaction chromatography. By SDS-PAGE, the molecular mass of the two purified enzymes was estimated to be 33 kDa and 63 kDa, respectively. The two proteases were found to be inhibited by PMSF, but not by iodoacetamide and EDTA. The 33 kDa protease (PRO33) exhibited maximal activity at pH 10.0 and the 63 kDa protease (PRO63) at pH 5.0. The optimum temperature for the two proteases was 65 degrees C. The PRO33 had a K(m) value of 6.6 mM and a V(max) value of 10.31 micromol/l/min, and PRO63 17.6 mM and 9.08 micromol/l/min, with casein as substrate. They were thermostable at 60 degrees C. The protease activity of PRO33 and PRO63 remained at 67.2% and 17.31%, respectively, after incubation at 70 degrees C for 1 h. The thermal stability of the two enzymes was significantly enhanced by Ca2+. The residual activity of PRO33 and PRO63 at 70 degrees C after 60 min was approximately 88.59% and 39.2%, respectively, when kept in the buffer containing Ca2+. These properties make them applicable for many biotechnological purposes.     

Cloning,expression, and characterization of serine protease from thermophilic fungus <Emphasis Type="Italic">Thermoascus aurantiacus</Emphasis> var. <Emphasis Type="Italic">levisporus</Emphasis>

The serine protease gene from a thermophilic fungus Thermoascus aurantiacus var. levisporus, was cloned, sequenced, and expressed in Pichia pastoris and the recombinant protein was characterized. The full-length cDNA of 2,592 bp contains an ORF of 1,482 bp encoding 494 amino acids. Sequence analysis of the deduced amino acid sequence revealed high homology with subtilisin serine proteases. The putative enzyme contained catalytic domain with active sites formed by three residues of Aspl83, His215, and Ser384. The molecular mass of the recombinant enzyme was estimated to be 59.1 kDa after overexpression in P. pastoris. The activity of recombinant protein was 115.58 U/mg. The protease exhibited its maximal activity at 50°C and pH 8.0 and kept thermostable at 60°C, and retained 60% activity after 60 min at 70° C. The protease activity was found to be inhibited by PMSF, but not by DTT or EDTA. The enzyme has broad substrate specificity such as gelatin, casein and pure milk, and exhibiting highest activity towards casein.     

Purification and characterization of thermostable organic solvent-stable protease from Aeromonas veronii PG01

A mesophilic bacterium, Aeromonas veronii PG01, isolated from industrial wastes produced an extracellular thermostable organic solvent tolerant protease. The optimum condition for cell growth and protease production was pH 7.0 and 30 °C. The protease produced was purified 53-fold to homogeneity with overall yield of 32%, through ammonium sulphate precipitation, ion-exchange and gel permeation chromatography (GPC). The molecular weight, as determined by GPC–HPLC, was found to be about 67 kDa. SDS-PAGE revealed that the enzyme consisted of two subunits, with molecular weight of 33 kDa. The protease was active in broad range of pH from 6.0 to 10.0 with optimum activity at pH 7.5. The optimum temperature for this protease was 60 °C. The enzyme remained active after incubation at 50–60 °C for 1 h. This enzyme was stable and active after incubation with benzene and it was activated 1.3- and 1.5-fold by n-hexane and n-dodecane, respectively. This protease was inhibited completely by the classic metalloprotease inhibitor 1,10-phenanthroline and partially by the metal chelator EDTA but not by the serine protease inhibitor PMSF. The PG01 protease was found to contain 1.901 mol of zinc per mole of enzyme upon analysis by Inductively coupled plasma-optical emission spectroscopy. The thermostable and solvent tolerance property make it an attractive and promising biocatalyst for enzyme mediated synthesis.     

Cloning, purification and characterization of a thermostable amylosucrase from Deinococcus geothermalis

Amylosucrase is a transglucosidase that catalyses the synthesis of an amylose-type polymer from sucrose, an abundant agro-resource. Here we describe a novel thermostable amylosucrase from the moderate thermophile Deinococcus geothermalis (DGAS). The dgas gene was cloned and expressed in Escherichia coli . The encoded enzyme was purified and characterized. DGAS displays a specific activity of 44 U mg⁻¹, an optimal temperature of 50 °C and a half-life of 26 h at 50 °C. Moreover, it produces an α-glucan at 50 °C, with an average degree of polymerization of 45 and a polymerization yield of 76%. DGAS is thus the most active and thermostable amylosucrase known to date.     

Regulation of digestive proteolytic activity in the larvae of Spilosoma obliqua (Lep., Arctiidae)

Proteolytic activity from the guts of the lepidopteran larvae Spilosoma obliqua was studied in relation to the developmental stages. The activity was found to increase with the advancement in the age of larvae and decreased with the onset of pupation. Starvation of fifth instar larvae, which exhibited maximum proteolytic activity, led to an increase at 8 h and declined further. There seems to be a possible relationship between the availability of the food and secretion of the enzymatic activity. The optimum pH and temperature for the gut protease was 11.0 and 50°C, respectively. Incubation of the gut protease for 24 h at 37°C led to a decrease in 52% of the activity, whereas there was a decrease of 17% in the activity at 4°C. No evidence could be found for the existence of the protease as an inactive precursor. The alkaline properties of the digestive protease seem to have all the potential to be exploited commercially as a additive in various biological formulations.     

Thermostable alkaline proteases of Bacillus licheniformis MIR 29: isolation,production and characterization

 Bacillus licheniformis MIR 29 has been isolated and produces extracellular proteases. It is able to grow at temperatures up to 60 °C and at pH values up to 9.0. Casein was the best carbon source for production of a thermostable protease activity which, in some conditions, is 90% extracellular. The synthesis of alkaline protease is not constitutive; different levels of production were found with different carbon and nitrogen sources. Casein was thought to be an inducer of enzyme synthesis. The optimal pH and temperature of the enzyme activity were 12 °C and 60 °C, respectively. The enzyme was stable up to 60 °C in the absence of stabilizers. The protease activity was inhibited with phenylmethylsulphonyl fluoride, indicating a serine-protease activity. The proteolytic activity was lowered by molecules present in the culture supernatant, which include amino acids and peptides, indicating end-product inhibition. Electrophoresis assay on denaturating gels showed two bands with alkaline protease activity, in the 25 to 40-kDa molecular mass range. Received: 7 June 1995/Received revision: 14 September 1995/Accepted: 20 September 1995     

Extremely thermostable amylolytic enzyme from the archaebacterium Pyrococcus furiosus

Abstract One of the most thermostable and thermoactive enzymes ever described has been characterized from a hyperthermophilic archaebacterium Pyrococcus furiosus . The enzyme system of this bacterium was capable of hydrolyzing starch forming a mixture of various oligosaccharides. Unlike the amylases from aerobic bacteria this enzyme does not require metal ions for activity or stability. The enzyme is catalytically active over a very broad temperature range, namely between 40°C and 140°C. The half life of this peculiar enzyme during autoclaving at 120°C is 2 h.