Crystal structure of a Flp recombinase-Holliday junction complex: assembly of an active oligomer by helix swapping

The crystal structure of a Flp recombinase tetramer bound to a Holliday junction intermediate has been determined at 2.65 A resolution. Only one of Flp's two domains, containing the active site, is structurally related to other lambda integrase family site-specific recombinases, such as Cre. The Flp active site differs, however, in that the helix containing the nucleophilic tyrosine is domain swapped, such that it cuts its DNA target in trans. The Flp tetramer displays pseudo four-fold symmetry matching that of the square planar Holliday junction substrate. This tetramer is stabilized by additional novel trans interactions among monomers. The structure illustrates how mechanistic unity is maintained on a chemical level while allowing for substantial variation on the structural level within a family of enzymes.     

Unveiling hidden catalytic contributions of the conserved His/Trp-III in tyrosine recombinases: assembly of a novel active site in Flp recombinase harboring alanine at this position

The catalytic pentad of tyrosine recombinases, that assists the tyrosine nucleophile, includes a conserved histidine/tryptophan (His/Trp-III). Flp and Cre harbor tryptophan at this position; most of their kin recombinases display histidine. Contrary to the conservation rule, Flp(W330F) is a much stronger recombinase than Flp(W330H). The hydrophobicity of Trp330 or Phe330 is utilized in correctly positioning Tyr343 during the strand cleavage step of recombination. Why then is phenylalanine almost never encountered in the recombinase family at this conserved position? Using exogenous nucleophiles and synthetic methylphosphonate or 5'-thiolate substrates, we decipher that Trp330 also assists in the activation of the scissile phosphate and the departure of the 5'-hydroxyl leaving group. These two functions are consistent with the hydrogen bonding property of Trp330 as well as its location in structures of the Flp recombination complexes. However, van der Waals contact between Trp330 and Arg308 may also be important for the phosphate activation step. A structure based suppression strategy permits the inactive variant Flp(W330A) to be rescued by a second site mutation A339M. Modeling alanine and methionine at positions 330 and 339, respectively, in the Flp crystal structure suggests a plausible mechanism for active site restoration. Successful suppression suggests the possibility of evolving, by design, new active site configurations for tyrosine recombination.     

Mutational analysis of the archaeal tyrosine recombinase SSV1 integrase suggests a mechanism of DNA cleavage in trans

The only tyrosine recombinase so far studied in archaea, the SSV1 integrase, harbors several changes in the canonical residues forming the catalytic pocket of this family of recombinases. This raised the possibility of a different mechanism for archaeal tyrosine recombinase. The residues of Int(SSV) tentatively involved in catalysis were modified by site-directed mutagenesis, and the properties of the corresponding mutants were studied. The results show that all of the targeted residues are important for activity, suggesting that the archaeal integrase uses a mechanism similar to that of bacterial or eukaryotic tyrosine recombinases. In addition, we show that Int(SSV) exhibits a type IB topoisomerase activity because it is able to relax both positive and negative supercoils. Interestingly, in vitro complementation experiments between the inactive integrase mutant Y314F and all other inactive mutants restore in all cases enzymatic activity. This suggests that, as for the yeast Flp recombinase, the active site is assembled by the interaction of the tyrosine from one monomer with the other residues from another monomer. The shared active site paradigm of the eukaryotic Flp protein may therefore be extended to the archaeal tyrosine recombinase Int(SSV).     

Functional analysis of box I mutations in yeast site-specific recombinases Flp and R: pairwise complementation with recombinase variants lacking the active-site tyrosine.

The site-specific recombinases Flp and R from Saccharomyces cerevisiae and Zygosaccharomyces rouxii, respectively, are related proteins that belong to the yeast family of site-specific recombinases. They share approximately 30% amino acid matches and exhibit a common reaction mechanism that appears to be conserved within the larger integrase family of site-specific recombinases. Two regions of the proteins, designated box I and box II, also harbor a significantly high degree of homology at the nucleotide sequence level. We have analyzed the properties of Flp and R variants carrying point mutations within the box I segment in substrate-binding, DNA cleavage, and full-site and half-site strand transfer reactions. All mutations abolish or seriously diminish recombinase function either at the substrate-binding step or at the catalytic steps of strand cleavage or strand transfer. Of particular interest are mutations of Arg-191 of Flp and R, residues which correspond to one of the two invariant arginine residues of the integrase family. These variant proteins bind substrate with affinities comparable to those of the corresponding wild-type recombinases. Among the binding-competent variants, only Flp(R191K) is capable of efficient substrate cleavage in a full recombination target. However, this protein does not cleave a half recombination site and fails to complete strand exchange in a full site. Strikingly, the Arg-191 mutants of Flp and R can be rescued in half-site strand transfer reactions by a second point mutant of the corresponding recombinase that lacks its active-site tyrosine (Tyr-343). Similarly, Flp and R variants of Cys-189 and Flp variants at Asp-194 and Asp-199 can also be complemented by the corresponding Tyr-343-to-phenylalanine recombinase mutant.     

Intermediates in serine recombinase-mediated site-specific recombination

Site-specific recombinases are enzymes that promote precise rearrangements of DNA sequences. They do this by cutting and rejoining the DNA strands at specific positions within a pair of target sites recognized and bound by the recombinase. One group of these enzymes, the serine recombinases, initiates strand exchange by making double-strand breaks in the DNA of the two sites, in an intermediate built around a catalytic tetramer of recombinase subunits. However, these catalytic steps are only the culmination of a complex pathway that begins when recombinase subunits recognize and bind to their target sites as dimers. To form the tetramer-containing reaction intermediate, two dimer-bound sites are brought together by protein dimer-dimer interactions. During or after this initial synapsis step, the recombinase subunit and tetramer conformations change dramatically by repositioning of component subdomains, bringing about a transformation of the enzyme from an inactive to an active configuration. In natural serine recombinase systems, these steps are subject to elaborate regulatory mechanisms in order to ensure that cleavage and rejoining of DNA strands only happen when and where they should, but we and others have identified recombinase mutants that have lost dependence on this regulation, thus facilitating the study of the basic steps leading to catalysis. We describe how our studies on activated mutants of two serine recombinases, Tn3 resolvase and Sin, are providing us with insights into the structural changes that occur before catalysis of strand exchange, and how these steps in the reaction pathway are regulated.     

DNA cleavage in trans by the active site tyrosine during Flp recombination: switching protein partners before exchanging strands.

Each recombination event mediated by the Flp recombinase is the sum of four strand breakage and reunion reactions executed in two steps of two-strand exchanges. The reaction requires four Flp monomers. The key catalytic residue in Flp is Tyr-343. Arg-191, His-305, and Arg-308 appear to facilitate the cleavage and exchange steps of recombination. These four residues constitute the invariant tetrad of the Int family site-specific recombinases. Complementation tests between "step-arrest" mutants of Flp suggest that each Flp protomer harbors a "fractional active site." Hybrid "half site-recombinase" complexes reveal that efficient catalysis occurs when the Arg-His-Arg triad is present on one Flp monomer and the active site Tyr on a second monomer. Strand cleavage by an Flp monomer occurs virtually exclusively on the half site to which its partner protein is bound (cleavage in trans), and almost never on the half site to which it is bound (cleavage in cis). Trans-cleavage by Flp can provide a means for functionally exchanging Flp monomers between two DNA partners. Such a mechanism would be germane to recombination, since cleavage and rejoining in cis can only restore the parental substrate configuration and cannot yield recombinants.     

Reciprocal control of catalysis by the tyrosine recombinases XerC and XerD: an enzymatic switch in site-specific recombination

In Xer site-specific recombination, sequential DNA strand exchange reactions are catalyzed by a heterotetrameric complex composed of two recombinases, XerC and XerD. It is demonstrated that XerC and XerD catalytic activity is controlled by an interaction involving the C-terminal end of each protein (the donor region) and an internal region close to the active site (the acceptor region). Mutations in these regions reciprocally alter the relative activity of XerC and XerD, with their combination producing synergistic effects on catalysis. The data support a model in which C-terminal intersubunit interactions contribute to coupled protein-DNA conformational changes that lead to sequential activation and reciprocal inhibition of pairs of active sites in the recombinase tetramer during recombination.     

Stereospecific suppression of active site mutants by methylphosphonate substituted substrates reveals the stereochemical course of site-specific DNA recombination

Tyrosine site-specific recombinases, which promote one class of biologically important phosphoryl transfer reactions in DNA, exemplify active site mechanisms for stabilizing the phosphate transition state. A highly conserved arginine duo (Arg-I; Arg-II) of the recombinase active site plays a crucial role in this function. Cre and Flp recombinase mutants lacking either arginine can be rescued by compensatory charge neutralization of the scissile phosphate via methylphosphonate (MeP) modification. The chemical chirality of MeP, in conjunction with mutant recombinases, reveals the stereochemical contributions of Arg-I and Arg-II. The S_P preference of the native reaction is specified primarily by Arg-I. MeP reaction supported by Arg-II is nearly bias-free or R_P-biased, depending on the Arg-I substituent. Positional conservation of the arginines does not translate into strict functional conservation. Charge reversal by glutamic acid substitution at Arg-I or Arg-II has opposite effects on Cre and Flp in MeP reactions. In Flp, the base immediately 5′ to the scissile MeP strongly influences the choice between the catalytic tyrosine and water as the nucleophile for strand scission, thus between productive recombination and futile hydrolysis. The recombinase active site embodies the evolutionary optimization of interactions that not only favor the normal reaction but also proscribe antithetical side reactions.     

Wild-type Flp recombinase cleaves DNA in trans.

Site-specific recombinases of the Integrase family utilize a common chemical mechanism to break DNA strands during recombination. A conserved Arg-His-Arg triad activates the scissile phosphodiester bond, and an active-site tyrosine provides the nucleophile to effect DNA cleavage. Is the tyrosine residue for the cleavage event derived from the same recombinase monomer which provides the RHR triad (DNA cleavage in cis), or are the triad and tyrosine derived from two separate monomers (cleavage in trans)? Do all members of the family follow the same cleavage rule, cis or trans? Solution studies and available structural data have provided conflicting answers. Experimental results with the Flp recombinase which strongly support trans cleavage have been derived either by pairing two catalytic mutants of Flp or by pairing wild-type Flp and a catalytic mutant. The inclusion of the mutant has raised new concerns, especially because of the apparent contradictions in their cleavage modes posed by other Int family members. Here we test the cleavage mode of Flp using an experimental design which excludes the use of the mutant protein, and show that the outcome is still only trans DNA cleavage.     

DNA recognition, strand selectivity, and cleavage mode during integrase family site-specific recombination

We have probed the association of Flp recombinase with its DNA target using protein footprinting assays. The results are consistent with the domain organization of the Flp protein and with the general features of the protein-DNA interactions revealed by the crystal structures of the recombination intermediates formed by Cre, the Flp-related recombinase. The similarity in the organization of the Flp and Cre target sites and in their recognition by the respective recombinases implies that the overall DNA-protein geometry during strand cleavage in the two systems must also be similar. Within the functional recombinase dimer, it is the interaction between two recombinase monomers bound on either side of the strand exchange region (or spacer) that provides the allosteric activation of a single active site. Whereas Cre utilizes the cleavage nucleophile (the active site tyrosine) in cis, Flp utilizes it in trans (one monomer donating the tyrosine to its partner). By using synthetic Cre and Flp DNA substrates that are geometrically restricted in similar ways, we have mapped the positioning of the active and inactive tyrosine residues during cis and trans cleavage events. We find that, for a fixed substrate geometry, Flp and Cre cleave the labile phosphodiester bond at the same spacer end, not at opposite ends. Our results provide a model that accommodates local heterogeneities in peptide orientations in the two systems while preserving the global functional architecture of the reaction complex.     

Biochemical and kinetic analysis of the RNase active sites of the integrase/tyrosine family site-specific DNA recombinases

In this study, we have used multiple strategies to characterize the mechanisms of the type I and type II RNA cleavage activities harbored by the Flp (pronounced here as "flip") site-specific DNA recombinase (Flp-RNase I and II, respectively). Reactions using half-sites pre-bound by step-arrest mutants of Flp agree with a "shared active site" being responsible for the type I reaction (as is the case with normal DNA recombination). In a "pre-cleaved" type I substrate containing a 3'-phosphotyrosyl bond, the Flp-RNase I activity can be elicited by either wild type Flp or by Flp(Y343F). Kinetic analyses of the type I reaction are consistent with the above observations and support the notion that the DNA recombinase and type I RNase active sites are identical. The type II RNase activity is expressed by Flp(Y343F) in a half-site substrate and is unaffected by the catalytic constitution of a Flp monomer present on a partner half-site. Reaction conditions that proscribe the assembly of a DNA bound Flp dimer have no effect on Flp-RNase II. These biochemical results, together with kinetic data, are consistent with the reaction being performed from a "non-shared active site" contained within a single Flp monomer. The Flp-related recombinase Cre, which utilizes a non-shared recombination active site, exhibits the type I RNA cleavage reaction. So far, we have failed to detect the type II RNase activity in Cre. Despite their differences in active site assembly, Cre functionally mimics Flp in being able to provide two functional active sites from a trimer of Cre bound to a three-armed (Y-shaped) substrate.     

Gamma integrase complementation at the level of DNA binding and complex formation

Site-specific recombinases of the gamma Int family carry out two single-strand exchanges by binding as head-to-head dimers on inverted core-type DNA sites. Each protomer may cleave its own site as a monomer in cis (as for Cre recombinase), or it may recruit the tyrosine from its partner in trans to form a composite active site (as for Flp recombinase). The crystal structure of the gamma Int catalytic domain is compatible with both cleavage mechanisms, but two previous biochemical studies on gamma integrase (Int) generated data that were not in agreement. Support for cis and trans cleavage came from assays with bispecific DNA substrates for gamma and HK022 Ints and from functional complementation between recombination-deficient mutants, respectively. The data presented here do not provide new evidence for cis cleavage, but they strongly suggest that the previously described complementation results cannot be used in support of a trans-cleavage mechanism. We show here that IntR212Q retains some residual catalytic function but is impaired in binding to core-type DNA on linear substrates and in forming higher-order attL intasome structures. The binding-proficient mutant IntY342F can stabilize IntR212Q binding to core-type DNA through protein-protein interactions. Similarly, the formation of higher-order Int complexes with arm- and core-type DNA is boosted with both mutants present. This complementation precedes cleavage and thus precludes any conclusions about the mechanism of catalysis. Cross-core stimulation of wild-type HK022-Int cleavage on its cognate site (in cis) by mutant gamma Ints on bispecific core DNA suicide substrates is shown to be independent of the catalytic tyrosine but appears to be proportional to the respective core-binding affinities of the gamma Int mutants.     

Chimeras of the Flp and Cre recombinases: tests of the mode of cleavage by Flp and Cre

The Flp and Cre recombinases are members of the integrase family of tyrosine recombinases. Each protein consists of a 13 kDa NH(2)-terminal domain and a larger COOH-terminal domain that contains the active site of the enzyme. The COOH-terminal domain also contains the major determinants for the binding specificity of the recombinase to its cognate DNA binding site. All family members cleave the DNA by the attachment of a conserved nucleophilic tyrosine residue to the 3'-phosphate group at the sites of cleavage. In order to gain further insights into the determinants of the binding specificity and modes of cleavage of Flp and Cre, we have made chimeric proteins in which we have fused the NH(2)-terminal domain of Flp to the COOH-terminal domain of Cre ("Fre") and the NH(2)-terminal domain of Cre to the COOH-terminal domain of Flp ("Clp"). These chimeras have novel binding specificities in that they bind strongly to hybrid sites containing elements from both the Flp and Cre DNA targets but poorly to the native target sites.In this study we have taken advantage of the unique binding specificities of Fre and Clp to examine the mode of cleavage by Cre, Flp, Fre and Clp. We find that the COOH-terminal domain of the recombinases determines their mode of cleavage. Thus Flp and Clp cleave in trans whereas Cre and Fre cleave in cis. These results agree with the studies of Flp and with the cocrystal structure of Cre bound to its DNA target site. They disagree with our previous findings that Cre could carry out trans cleavage. We discuss the variations in the experimental approaches in order to reconcile the different results.     

High efficiency of a sequential recombinase-mediated cassette exchange reaction in Escherichia coli

A comparison between the efficiency of recombinase-mediated cassette exchange (RMCE) reactions catalyzed in Escherichia coli by the site-specific recombinases Flp of yeast and Int of coliphage HK022 has revealed that an Flp-catalyzed RMCE reaction is more efficient than an Int-HK022 catalyzed reaction. In contrast, an RMCE reaction with 1 pair of frt sites and 1 pair of att sites catalyzed in the presence of both recombinases is very inefficient. However, the same reaction catalyzed by each recombinase individually supplied in a sequential order is very efficient, regardless of the order. Atomic force microscopy images of Flp with its DNA substrates show that only 1 pair of recombination sites forms a synaptic complex with the recombinase. The results suggest that the RMCE reaction is sequential.     

Functional analysis of Arg-308 mutants of Flp recombinase. Possible role of Arg-308 in coupling substrate binding to catalysis

The arginine residue at position 308 in the Flp recombinase corresponds to the only invariant arginine within the Int family of recombinases. Alterations of this residue result in Flp variants that retain substrate recognition, but form weaker protein-DNA complexes than wild type Flp. Furthermore, their DNA cleavage activity is significantly diminished. A conservative change of R308K results in a functional Flp variant; however, this protein has a lowered temperature optimum for recombination. The Arg-308 mutants can be stabilized on the DNA substrate through cooperativity with a partner Flp mutant that is tight binding. Thus, interactions between Flp monomers must be a relevant feature of the normal recombination reaction.     

Inhibition of Flp recombinase by the topoisomerase I-targeting drugs, camptothecin and NSC-314622

Recombinases of the lambda-Int family and type IB topoisomerases act by introducing transient single strand breaks in DNA using chemically identical reaction schemes. Recent structural data have supported the relationship between the two enzyme groups by revealing considerable similarities in the architecture of their catalytic pockets. In this study we show that the Int-type recombinase Flp is inhibited by the two structurally unrelated topoisomerase I-directed anti-cancer drugs, camptothecin (CPT) and NSC-314622. The interaction of these drugs with topoisomerase I is very specific with several single amino acid substitutions conferring drug resistance to the enzyme. Thus, the observed interaction of CPT and NSC-314622 with Flp, which is comparable to their interaction with the cleavage complex formed by topoisomerase I, strongly supports a close mechanistic and evolutionary relationship between the two enzymes. The results suggest that Flp and other Int family recombinases may provide model systems for dissecting the molecular mechanisms of topoisomerase I-directed anti-cancer therapeutic agents.     

Identification of the active site tyrosine of Flp recombinase. Possible relevance of its location to the mechanism of recombination

A combination of site-directed mutagenesis and amino acid sequence analysis identifies Tyr-343 of Flp recombinase as the residue that covalently attaches to DNA during the strand-cleavage step of recombination. This residue is part of the invariant His-Arg-Tyr triad of the Int family of recombinases. Tyr-343 is located in a highly protease-accessible (and hence "open") region of Flp. This placement may provide the conformational flexibility required for the dual role of Tyr-343 in recombination: nicking of the DNA strands to initiate recombination and joining of the nicked strands across partner substrates to complete recombination. In-frame insertion of a few amino acids close to Tyr-343 (and to its amino-terminal side) does not affect substrate recognition by Flp but abolishes its catalytic function.     

Peptide trapping of the Holliday junction intermediate in Cre-loxP site-specific recombination

Cre recombinase is a prototypical member of the tyrosine recombinase family of site-specific recombinases. Members of this family of enzymes catalyze recombination between specific DNA sequences by cleaving and exchanging one pair of strands between the two substrate sites to form a 4-way Holliday junction (HJ) intermediate and then resolve the HJ intermediate to recombinant products by a second round of strand exchanges. Recently, hexapeptide inhibitors have been described that are capable of blocking the second strand exchange step in the tyrosine recombinase recombination pathway, leading to an accumulation of the HJ intermediate. These peptides are active in the lambda-integrase, Cre recombinase, and Flp recombinase systems and are potentially important tools for both in vitro mechanistic studies and as in vivo probes of cellular function. Here we present biochemical and crystallographic data that support a model where the peptide inhibitor binds in the center of the recombinase-bound DNA junction and interacts with solvent-exposed bases near the junction branch point. Peptide binding induces large conformational changes in the DNA strands of the HJ intermediate, which affect the active site geometries in the recombinase subunits.     

DNA recombination and RNA cleavage activities of the Flp protein: roles of two histidine residues in the orientation and activation of the nucleophile for strand cleavage.

Using a combination of DNA and hybrid DNA-RNA substrates, we have analyzed the mechanism of phosphoryl transfer by the Flp site-specific recombinase in three different reactions: DNA strand breakage and joining, and two types of RNA cleavage activities. These reactions were then used to characterize Flp variants altered at His309 and His345, amino acid residues that are in close proximity to two key catalytic residues (Arg308 and Tyr343). These histidine residues are important for strand cutting by Tyr343, the active-site nucleophile of Flp, but neither residue contributes to the type II RNA cleavage activity or to the strand-joining reaction in a pre-cleaved substrate. Strand cleavage reactions using small, diffusible nucleophiles indicate that this histidine pair contributes to the correct positioning and activation of Tyr343 within the shared active site of Flp. The implications of these results are evaluated against the recently solved crystal structure of Flp in association with a Holliday junction.     

Tyr60 variants of Flp recombinase generate conformationally altered protein-DNA complexes. Differential activity in full-site and half-site recombinations

The tyrosine at position 60 of the Flp recombinase of the Saccharomyces cerevisiae plasmid, 2 mu circle, is invariant among site-specific recombinases of the "yeast plasmid family". Alterations of this residue give rise to Flp variants that show no recombination activity when assayed in vivo in Escherichia coli. Upon purification, they bind substrate, execute DNA cleavage and catalyze recombination. The efficiency of strand cleavage follows the order: Flp(Y60F) greater than Flp greater than Flp(Y60S) greater than Flp(Y60D); efficiency of recombination between Flp sites on a linear substrate and a circular one follows the order: Flp greater than Flp(Y60F) greater than Flp(Y60S) greater than Flp(Y60D). Methylation footprints of the DNA-protein complexes formed by two of the Flp variants, Flp(Y60S) and Flp(Y60D), do not show hypermethylation of the G residues within the substrate core that is characteristic of complexes formed by wild-type Flp. The third variant, Flp(Y60F), causes significant distortion (although less than wild-type Flp) of the substrate core, as indicated by enhanced G-methylation. Binding profiles with circularly permuted substrates indicate that Flp(Y60S) and Flp(Y60D), but not Flp(Y60F), are defective in bending substrate DNA. In recombination between two Flp half-sites, the variant proteins are significantly more active than in normal full-site recombination.