Photoluminescence enhancement in Na3SO4Cl:X (X = Ce3+, Eu3+ or Dy3+) material

The compound Na₃SO₄Cl X (X = Ce³⁺, Eu³⁺ or Dy³⁺) prepared by the wet chemical method was studied for its photoluminescence (PL) and energy transfer characteristics. The PL from Na₃SO₄Cl:Ce³⁺ shows strong emission at 322 nm at an excitation of 272 nm. Therefore, an efficient Ce³⁺ → Dy³⁺, Eu²⁺ → Dy³⁺ and Eu²⁺ → Eu³⁺ energy transfer had taken place in this host. The Dy³⁺ emission caused by Ce³⁺ → Dy³⁺ energy transfer under ultraviolet (UV) wavelengths peaked at around 477 nm and 572 nm due to ⁴ F_9/2 → ⁶H_15/2 and ⁶H_13/2 transitions with yellow–orange emission in the Na₃SO₄Cl lattice. An intense Dy³⁺ emission was observed at 482 and 576 nm caused by the Eu²⁺ → Dy³⁺ energy transfer process and due to ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions respectively. The Eu³⁺ blue to red light emission caused by the Eu²⁺ → Eu³⁺ energy transfer peaked at 593 nm and 617 nm due to ⁵D₀ → ⁵D₃ transitions. The presence of trivalent Eu in Na₃SO₄Cl suggested the presence of Eu³⁺ in the host compound that occupied two different lattice sites and that peaked at 593 and 617 nm due to ⁵D₀ → ⁷ F₁ and ⁵D₀ → ⁷ F₂ transitions respectively. The trivalent europium ion is very useful for studying the nature of metal coordination in various systems due to its non‐degenerate emitting ⁵D₀ state. The present paper discusses the photoluminescence characteristics of Eu²⁺ → Dy³⁺ and Eu²⁺ → Eu³⁺ energy transfer. This compound may be useful as a lamp phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent properties of MAl(SO4)2Br:Eu3+ (M = Sr or Mg) red phosphors for near‐UV light‐emitting diodes

Eu³⁺‐activated MAl(SO₄)₂Br phosphors (where M = Mg or Sr) are successfully prepared using a wet chemical reaction technique. The samples are characterized by X‐ray diffraction (XRD) and photoluminescence (PL) spectroscopies. The XRD pattern revealed that both the samples are microcrystalline in nature. PL of Eu³⁺‐doped SrAl(SO₄)₂Br and MgAl(SO₄)₂Br phosphors exhibited characteristic red emission coming from the ⁵D₀ → ⁷F₂ (616 nm) electron transition, when excited by 396 nm wavelength of light. The maximum intensity of luminescence was observed at a concentration of 1 mol% Eu³⁺. The intensity of the electric dipole transition at 616 nm is greater than that of the magnetic dipole transition at 594 nm. The results showed that MAl(SO₄)₂Br:Eu³⁺, (M = Mg, Sr) phosphors have potential application in near‐UV light‐emitting diodes as efficient red‐emitting phosphor. Copyright © 2014 John Wiley & Sons, Ltd.     

Stability of luminescence in LaPO4, LaPO4:RE3+ (RE = Dy,Eu) nanophosphors

The property of high refractive index, low solubility in water as well as stability to high temperature variation of lanthanum phosphate (LaPO₄) proved it was the most effective candidate for the production of display lamps, and plasma display panel devices and sensors. The morphological and nanostructural characteristics play a key role in the working efficiency of the luminescent material. These properties can be controlled by the synthesis method, which we have adopted in this paper. We have prepared LaPO₄ nanoparticles at a relatively low temperature (110 ºC) in polyethylene glycol medium by using a wet chemical one‐step synthesis. The phase composition and structural properties of the sample have been characterized by X‐ray diffraction, Fourier transform infrared, transmission electron microscopy and the luminescent property by photoluminescence and thermoluminescence. The samples were well crystallized and the average crystallite size of 15 nm has been calculated for pure LaPO₄ using the Debye–Scherrer equation. The result from heat‐treated samples shows the phase combination and morphological structure of the powder depend on the annealing temperature. The heat treatment changes the structure of LaPO₄ from cuboid rods to fine grains at about 600 °C. The emission spectrum of LaPO₄ shows the broad emission band at 368 nm and shoulder at 465 nm with emission of blue color when monitored at an excitation wavelength at 256 nm. The stability of phosphor has been studied with respect to humidity, temperature, doping, doping concentration, γ‐ray exposures, etc. The prepared nanosized phosphors were thermally stable and may be a promising blue phosphor for lighting technology as well as radiation dosimetry. Copyright © 2014 John Wiley & Sons, Ltd.     

Photoluminescence properties of LiBaPO4:M3+ phosphor for near‐UV light‐emitting diode (M = Eu and Dy)

A novel phosphor LiBaPO₄ doped with rare earths Eu and Dy prepared by high temperature solid‐state reaction method is reported. The phosphors were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorophotometer. The excitation spectra of LiBaPO₄:Eu³⁺ phosphor can be efficiently excited by 394 nm, which is matched well with the emission wavelength of near‐UV light‐emitting diode (LED) chip. PL properties of Eu³⁺‐doped LiBaPO₄ exhibited the characteristic red emission coming from ⁵D₀ → ⁷ F₁ (593 nm) and ⁵D₀ → ⁷ F₂ (617 nm) electronic transitions with color co‐ordinations of (0.680, 0.315). The results demonstrated that LiBaPO₄:Eu³⁺ is a potential red‐emitting phosphor for near‐UV LEDs. Emission spectra of LiBaPO₄:Dy³⁺ phosphors showed efficient blue (481 nm) and yellow (574 nm) bands, which originated from ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of the Dy³⁺ ion, respectively. The 574 nm line is more intense than the 481 nm lines, which indicates that the site Dy³⁺ is located with low symmetry. This article summarizes fundamentals and possible applications of optically useful inorganic phosphates with visible photoluminescence of Eu³⁺ and Dy³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural and luminescence properties of Y2‐xGeMoO8:REx (RE = Eu,Tb) phosphors

Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors were synthesized using a facile sol–gel method. The morphology and structure of the phosphors were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD); while their luminescent properties were investigated by photoluminescence (PL) spectrometry. Our results reveal that all of these Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors adopted the tetragonal phase, belonging to Scheelite (CaWO₄) structure. The obtained YGeMoO₈:Eu phosphors exhibit a strong emission in the red light range which can be assigned to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ when it is excited at 459 nm. Under 392 and 489 nm excitation, the YGeMoO₈:Tb phosphors present predominant green emission (⁵D₄ → ⁷F₅) at 540 nm. The highest emission of the phosphors can be achieved by adjusting the doping concentration to be 0.25 for Eu³⁺ and 0.15 for Tb³⁺, respectively. The promising luminescence properties of these materials indicate that they can be potentially applied to white‐light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Wet‐chemical preparation of Ce3+‐activated K2LaX5 (X = Cl,Br or I) phosphors

There has been a renewed interest in Ce³⁺‐activated halide phosphors due to applications as scintillation detectors, especially for positron emission tomography. For K₂LaCl₅, the light yield increases and the energy resolution (FWHM) improves with increasing Ce³⁺ doping. K₂LaX₅ compounds are also important as laser hosts for the mid‐IR range. K₂LaCl₅:Nd crystals show bright mid‐IR luminescence, which makes them a candidate for IR laser materials. Efficient emission in the IR range has also been reported in K₂LaCl₅:U³⁺. A one‐step, wet chemical process for preparing Ce³⁺‐activated K₂LaCl₅ phosphor is described. Intense luminescence of Ce³⁺ can be observed in the as‐prepared powders without any heat treatment. The availability of such powders opens up several exciting possibilities, such as growing single crystals without going to the high temperatures required for melting the constituent chlorides, or even obtaining processed, transparent, Ce³⁺‐activated materials without taking recourse to crystal growth. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel Na15(SO4)5F4Cl:Ce3+ halosulfate phosphors

A series of Na₁₅(SO₄)₅F₄Cl phosphors doped with Ce³⁺ ions was prepared using the wet chemical method. X‐Ray diffraction studies were used to determine their phase formation and purity. Fourier transform infrared spectroscopy effectively identified the chemical bonds present in the molecule. The photoluminescence properties of the as‐prepared phosphors were investigated and the Ce³⁺ ions in these hosts were found to give broadband emission in the UV range. For the thermoluminescence study, phosphors were irradiated with a 5 Gy dose of γ‐rays from a ⁶⁰Co source. Chen’s half‐width method was employed to calculate the trapping parameters from the thermoluminescence glow curve. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescence characterization of KBaPO4:RE (RE = Sm3+,Eu3+,Dy3+) phosphors

KBaPO₄ luminescent powdered phosphors doped with rare earth elements (RE = Sm³⁺,Eu³⁺,Dy³⁺) were successfully synthesized using a wet chemical method to identify the most suitable phosphor for solid‐state lighting based on the measurement of their emission spectra at excitation wavelengths. The X‐ray diffraction pattern of the as‐prepared KBaPO₄ was well matched with its standard JCPDS file no. 330996, indicating the formation of the desired compound. Scanning electron microscopy images revealed irregular morphology, the material crystallized particles aggregated and were non‐uniform with particle sizes ranging from 1 to 100 μm. Photoluminescence excitation and emission spectra clearly indicated that the phosphor containing the Sm³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 403 nm and exhibited an emission mainly including two wavelength peaks at 559 nm and 597 nm. The phosphor containing the Eu³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 396 nm and exhibited a bright red emission mainly including two wavelength peaks at 594 nm and 617 nm. The phosphor containing the Dy³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 349 nm and exhibited wavelength peaks at 474 nm and 570 nm.     

Luminescence characterization of Dy and Eu doped Na6Mg(SO4)4 phosphors

A series of single‐phase phosphors based on Na₆Mg(SO₄)₄ (Z_eff = 11.70) doped with Dy and Eu was prepared by the wet chemical method. The photoluminescence (PL) and thermoluminescence (TL) properties of Dy³⁺‐ and Eu³⁺‐activated Na₆Mg(SO₄)₄ phosphors were investigated. The characteristic emissions of Dy³⁺ and Eu³⁺ were observed in the Na₆Mg(SO₄)₄ host. The TL glow curve of the Na₆Mg(SO₄)₄:Dy phosphor consisted of a prominent peak at 234°C and a very small hump at 158°C. The TL sensitivity of the Na₆Mg(SO₄)₄:Dy phosphor was found to be four times less than the commercialized CaSO₄:Dy phosphor. The TL dose–response of the Na₆Mg(SO₄)₄:Dy phosphor was studied from a dose range of 5–10 kGy and the linear dose–response was observed up to 1 kGy which is good for a microcrystalline phosphor. Trapping parameters for both the samples were calculated using the Initial Rise and Chen's peak shape methods.     

Photoluminescence properties of aeschynite‐type LaNbTiO6:RE3+ (RE = Tb,Dy, Ho) down‐converting phosphors

In this study, a series of LaNbTiO₆:RE³⁺ (RE = Tb, Dy, Ho) down‐converting phosphors were synthesized using a modified sol–gel combustion method, and their photoluminescence (PL) properties were investigated as a function of activator concentration and annealing temperature. The resultant particles were characterized using X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, UV/Vis diffuse reflectance spectroscopy and PL spectra. The highly crystalline LaNbTiO₆:RE³⁺ (RE = Tb, Dy, Ho) phosphors with an average size of 200–300 nm obtained at 1100°C have an orthorhombic aeschynite‐type structure and exhibit the highest luminescent intensity in our study range. The emission spectra of LaNbTiO₆:RE³⁺ (RE = Tb, Dy, Ho) phosphors under excitations at UV/blue sources are mainly composed of characteristic peaks arising from the f–f transitions of RE³⁺, including 489 nm (⁵D₄ → ⁷F₆) and 545 nm (⁵D₄ → ⁷F₅) for Tb³⁺, 476 and 482 nm (⁴F_9/2 → ⁶H_15/2) and 571 nm (⁴F_9/2 → ⁶H_13/2) for Dy³⁺, and 545 nm (⁵F₄ + ⁵S₂ → ⁵I₈) for Ho³⁺, respectively. The luminescent mechanisms were further investigated. It can be expected that these phosphors are of intense interest and potential importance for many optical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Luminescence in Ba2Sr2Al2O7:RE (RE = Tb3+,Eu3+ and Dy3+) novel aluminate phosphors

The luminescence of novel rare earth ( Tb ^{3 +} , Eu ^{3 +} and Dy ^{3 +} )‐activated Ba ₂ Sr ₂ Al ₂ O ₇ phosphors for solid‐state lighting is presented. The aluminate phosphors were synthesized using a one‐step combustion method. X‐Ray diffraction, scanning electron microscopy and photoluminescence characterizations were performed to understand the mechanism of excitation and the corresponding emission in the as‐prepared phosphor, as characterized the phase purity and microstructure. Improvements in the luminescence properties of the phosphors with rare earth concentration were observed. The phosphor hue could be tuned from blue, green and red by proper selection of rare earth ions in typical concentrations. Effective absorption in the near‐ultraviolet region was observed, which makes the phosphor a potential candidate for ultraviolet light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence studies of CaAl2O4:Dy3+ phosphor

Calcium aluminate phosphors activated by Dy³⁺ have been prepared by a combustion method at a temperature of 600°C. Photoluminescence (PL) and thermoluminescence (TL) properties of gamma‐irradiated Dy‐doped calcium aluminate were investigated. The PL spectrum shows a broad peak around 488 nm and 573 nm, under 347 nm excitation. Thermoluminescence studies were performed for different concentrations of Dy. Optimum intensity of photoluminescence was found for 0.02 mol% concentration of Dy. It was found that initially the peak TL intensity increases with increasing concentration of Dy in the CaAl₂O₄ host, attains a maximum value for 0.05 mol% concentration and decreases with further increase in the doping concentration due to concentration quenching. Copyright © 2015 John Wiley & Sons, Ltd.     

Combustion synthesis of blue‐emitting submicron CaAl4O7:Eu2+, Dy3+ persistence phosphor

Long persistence phosphor CaAl₄O₇: Eu²⁺, Dy³⁺ were prepared by a combustion method. The phosphors were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), decay time measurement techniques and photoluminescence spectra (PL). The CaAl₄O₇: Eu²⁺, Dy³⁺ phosphor showed a broad blue emission, peaking at 445 nm when excited at 341 nm. Such a blue emission can be attributed to the intrinsic 4f → 5d transitions of Eu²⁺ in the host lattices. The lifetime decay curve of the Dy³⁺ co‐doped CaAl₄O₇: Eu²⁺ phosphor contains a fast decay component and another slow decay one. Surface morphology also has been studied by SEM. The calculated CIE colour chromaticity coordinates was (0.227, 043). We have also discussed a possible long‐persistent mechanism of CaAl₄O₇:Eu²⁺, Dy³⁺ phosphor. All the results indicate that this phosphor has promising potential for practical applications in the field of long‐lasting phosphors for the purposes of sign boards and defence. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence characteristics of (Y,Gd)BO3:RE (RE = Eu3+, Ce3+, Dy3+ and Tb3+) phosphors for blue chip and near‐UV white LEDs

A series of Eu³⁺‐, Ce³⁺‐, Dy³⁺‐ and Tb³⁺‐doped (Y,Gd)BO₃ phosphors was synthesized by a solid‐state diffusion method. X‐Ray diffraction confirmed their hexagonal structure and the scanning electron microscopy results showed crystalline particles. The excitation spectra revealed that (Y,Gd)BO₃ phosphors doped with Eu³⁺, Ce³⁺ , Dy³⁺ and Tb³⁺ are effectively excited with near UV‐light of 395 nm/blue light, 364, 351 and 314 nm, respectively. Photoluminescence spectra of Eu³⁺‐, Ce³⁺‐ and Tb³⁺/Dy³⁺‐doped phosphor showed intense emission of reddish orange, blue and white light, respectively. The phosphor Y_0.60Gd_0.38BO₃:Ce_0.02 showed CIE 1931 color coordinates of (0.158, 0.031) and better color purity compared with commercially available blue BAM:Eu²⁺ phosphor. The phosphor (Y,Gd)BO₃ doped with Eu³⁺, Dy³⁺ and Tb³⁺ showed CIE 1931 color coordinates of (0.667, 0.332), (0.251, 0.299) and (0.333, 0.391) respectively. Significant photoluminescence characteristics of the prepared phosphors indicate that they might serve as potential candidates for blue chip and near‐UV white light‐emitting diode applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Dy(3+) and Mn(2+) emission in fluoride- and chloride-based Na(3) (SO(4) )X (X = F or Cl) phosphors

In the present study, Na₃(SO₄)X (X = F or Cl) halosulphate phosphors have been synthesized by the solid‐state diffusion method. The phase formation of the compounds Na₃(SO₄)F and Na₃(SO₄)Cl were confirmed by X‐ray powder diffraction (XRD) measurement. Photoluminescence (PL) excitation spectrum measurement of Na₃(SO₄)F:Ce³⁺ and Na₃(SO₄)Cl:Ce³⁺ shows this phosphor can be efficiently excited by near‐ultraviolet (UV) light and presents a dominant luminescence band centred at 341 nm for Ce³⁺, which is responsible for energy transfer to Dy³⁺and Mn²⁺ ions. The efficient Ce³⁺ → Dy³⁺ energy transfer in Na₃(SO₄)F and Na₃(SO₄)Cl under UV wavelength was observed due to ⁴ F_9/2 to ⁶H_15/2 and ⁶H_13/2 level, while Ce³⁺ → Mn²⁺ was observed due to ⁴ T₁ state to ⁶A₁. The purpose of the present study is to develop and understanding the photoluminescence properties of Ce³⁺‐, Dy³⁺‐ and Mn²⁺‐doped fluoride and chloride Na₃(SO₄)X (X = F or Cl) luminescent material, which can be the efficient phosphors in many applications, such as scintillation applications, TL dosimetry and the lamp industry, etc. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence of Eu and Ce in K3Ca2(SO4)3F fluoride material

A new halophosphor K₃Ca₂(SO₄)₃ F activated by Eu or Ce and K₃Ca₂(SO₄)₃ F:Ce,Eu co‐doped halosulfate phosphor has been synthesized by the co‐precipitation method and characterized for its photoluminescence (PL). The PL emission spectra of the K₃Ca₂(SO₄)₃ F :Ce phosphor show emission at 334 nm when excited at 278 nm due to 5d → 4f transition of Ce³⁺ ions. In the K₃Ca₂(SO₄)₃ F:Eu lattice, Eu²⁺ (440 nm) as well as Eu³⁺ (596 nm and 615 nm) emissions have been observed showing ⁵D₀ → ⁷ F₁ and ⁵D₀ → ⁷ F₂ transition of the Eu³⁺ ion, which is in the blue and red region of the visible spectrum respectively. The trivalent europium ion is very useful for studying the nature of metal coordination in various systems owing to its non‐degenerate emitting ⁵D₀ state. K₃Ca₂(SO₄)₃ F:Ce,Eu is suitable for Ce³⁺ → Eu²⁺ → Eu³⁺ energy transfer in which Ce³⁺and Eu²⁺ play the role of sensitizers and Eu²⁺ and Eu³⁺ act as the activators. The observations presented in this paper are relevant for lamp phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of Dy3+ or Eu2+ co‐activator on a BaCa(SO4)2:Ce3+ mixed alkaline earth sulfate phosphor

The individual emission and energy transfer between Ce³⁺ and Eu²⁺ or Dy³⁺ in BaCa(SO₄)₂ mixed alkaline earth sulfate phosphor prepared using a co‐precipitation method is described. The phosphor was characterized by X‐ray diffraction (XRD) and photoluminescence (PL) studies and doped by Ce;Eu and Dy rare earths. All phosphors showed excellent blue–orange emission on excitation with UV light. PL measurements reveal that the emission intensity of Eu²⁺ or Dy³⁺ dopants is greater than when they are co‐doped with Ce³⁺. An efficient Ce³⁺ → Eu²⁺ [²T_2g(4f⁶5d) → ⁸S_7/2(4f₇)] and Ce³⁺ → Dy³⁺ (⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2) energy transfer takes place in the BaCa(SO₄)₂ host. A strong blue emission peak was observed at 462 nm for Eu²⁺ ions and an orange emission peak at 574 nm for Dy³⁺ ions. Hence, this phosphor may be used as a lamp phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of Ca2Al2O5:RE3+ (RE = Eu,Dy and Tb) phosphors for solid state lighting

Ca₂Al₂O₅:Eu³⁺, Ca₂Al₂O₅:Dy³⁺ and Ca₂Al₂O₅:Tb³⁺ phosphors were synthesized using a combustion synthesis method. The prepared phosphors were characterized by X‐ray powder diffraction for phase purity, by scanning electron microscopy for morphology, and by photoluminescence for emission and excitation measurements. The Ca₂Al₂O₅:Eu³⁺ phosphors could be efficiently excited at 396 nm and showed red emission at 594 nm and 616 nm due to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions. Dy³⁺‐doped phosphors showed blue emission at 482 nm and yellow emission at 573 nm. Ca₂Al₂O₅:Tb³⁺ phosphors showed emission at 545 nm when excited at 352 nm. Concentration quenching occurred in both Eu³⁺ and Dy³⁺phosphors at 0.5 mol%. Photoluminescence results suggested that the aluminate‐based phosphor could be a potential candidate for application in environmentally friendly based lighting technologies.     

Synthesis and luminescence characterization of Y2BaZnO5:RE (RE = Eu3+, Tb3+, Pr3+ and Sm3+) phosphors

Modified synthesis and luminescence of Y₂BaZnO₅ phosphors activated with the rare earths (RE) Eu³⁺, Tb³⁺, Pr³⁺ and Sm³⁺ are reported. RE₂BaZnO₅ phosphors have attracted attention because of their interesting magnetic and optical properties; and are usually prepared using a two‐step solid‐state reaction. In the first step, carbonates or similar precursors are thoroughly mixed and heated at 900°C to decompose them to oxides. To eliminate the unwanted phases like BaRE₂O₄, the resulting powders are reheated at 1100°C for a long time. We prepared Y₂BaZnO₅ phosphors activated with various activators by replacing the first step with combustion synthesis. The photoluminescence results are presented. The photoluminescence results for Eu³⁺, Tb³⁺ and Pr³⁺ are in good agreement with the literature. However, photoluminescence emission from Sm³⁺ has not been documented previously. The excitation spectrum of Eu³⁺ is dominated by a charge transfer band around 261 nm, and an additional band around 238 nm is always present, irrespective of the type of activator. The presence of this band for all these different types of activators was interpreted as host absorption.     

Novel red colour emitting Ca0.995Mg2(SO4)3:0.5Eu2+ phosphor under ultraviolet,blue, and green excitation for plant growth LEDs

In the recent few years, Eu²⁺- and Mn⁴⁺-activated phosphors are widely used as potential colour converters for indoor plant cultivation lighting application due to their marvellous luminescence characteristics as well as low cost. In this investigation, we synthesized novel red colour-emitting Ca_(2−x)Mg₂(SO₄)₃:xmol% Eu²⁺ (x = 0–1.0 mol%) phosphors via a solid-state reaction method in a reducing atmosphere. The photoluminescence (PL) excitation spectra of synthesized phosphors exhibited a broad excitation band with three excitation bands peaking at 349 nm, 494 nm, and 554 nm. Under these excitations, emission spectra exhibited a broad band in the red colour region at ~634 nm. The PL emission intensity was measured for different concentrations of Eu²⁺. The maximum Eu²⁺ doping concentration in the Ca₂Mg₂(SO₄)₃ host was observed for 0.5 mol%. According to Dexter theory, it was determined that dipole–dipole interaction was responsible for the concentration quenching. The luminous red colour emission of the sample was confirmed using Commission international de l'eclairage colour coordinates. The results of PL excitation and emission spectra of the prepared phosphors were well matched with excitation and emission wavelengths of phytochrome P_R. Therefore, from the entire investigation and obtained results it was concluded that the synthesized Ca_0.995Mg₂(SO₄)₃:0.5mol%Eu²⁺ phosphor has huge potential for plant cultivation application.