Micro‐organisms in latex and natural rubber coagula of Hevea brasiliensis and their impact on rubber composition,structure and properties

Natural rubber, produced by coagulation of the latex from the tree Hevea brasiliensis, is an important biopolymer used in many applications for its outstanding properties. Besides polyisoprene, latex is rich in many nonisoprene components such as carbohydrates, proteins and lipids and thereby constitutes a favourable medium for the development of micro‐organisms. The fresh rubber coagula obtained by latex coagulation are not immediately processed, allowing the development of various microbial communities. The time period between tree tapping and coagula processing is called maturation, during which an evolution of the properties of the corresponding dry natural rubber occurs. This evolution is partly related to the activity of micro‐organisms and to the modification of the biochemical composition. This review synthesizes the current knowledge on microbial populations in latex and natural rubber coagula of H. brasiliensis and the changes they induce on the biochemistry and technical properties of natural rubber during maturation.     

Characterization of natural rubber biosynthesisin Ficus benghalensis

Natural rubber was identified for the first time in the latex of Ficus benghalensis, and the rubber biosynthetic activity in latex and rubber particles was investigated. ¹³C NMR analysis of samples prepared by successive extractions with acetone and benzene confirmed that the benzene-soluble residues were natural rubber, cis-1,4-polyisoprene. The rubber content in the latex of F. benghalensis was approximately 17 %. Gel permeation chromatography revealed that the molecular mass of the natural rubber from F. benghalensis was approximately 1 500 kDa. The high rubber content and large molecular size suggest that F. benghalensis is a good candidate for an alternative rubber source. Examination of latex serum from F. benghalensis by SDS-polyacrylamide gel electrophoresis revealed a small number of proteins with major proteins of 31 and 55 kDa in size. The 31-kDa protein was predominant in catalytically-active rubber particles. Determination of metal ion concentration in latex and a comparison of the effect of ethylenediamine-tetraacetic acid on in vitro rubber biosynthesis in F. benghalensis, F. carica and Hevea brasiliensis suggest that the divalent metal ion present in latex serum is an important physiological factor controlling the rubber biosynthetic activities in these plant species. Microscopic examination revealed that the rubber in F. benghalensis occurred in a series of laticifer cells located in concentric zones in the inner bark of stems and branches.     

Extraction and characterization of a natural rubber from Euphorbia characias latex

A natural rubber was identified and characterized for the first time in the latex of the perennial Mediterranean shrub Euphorbia characias. Four different methods, i.e., acetone, acetic acid, trichloroacetic acid, and Triton® X‐100, followed by successive treatments with cyclohexane/ethanol, were employed to extract the natural rubber. The rubber content was shown to be 14% (w/v) of the E. characias latex, a low content compared with that of Hevea brasiliensis (30–35%) but a similar content to other rubber producing plants. E. characias rubber showed a molecular weight of 93,000 with a M_w/M_n of 2.9. ¹H NMR, ¹³C NMR, and FTIR analysis revealed the characteristic of the cis‐1,4‐polyisoprene typical of natural rubber. These results provided novel insight into latex components and will ultimately benefit the broader understanding of E. characias latex composition. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 589–594, 2012.     

The influence of natural rubber/Au nanoparticle membranes on the physiology of Leishmania brasiliensis

The development of nanotechnology has generated new means of disease diagnosis and treatment. Infectious diseases, including leishmaniasis, malaria, etc., have benefited from the advent of new nanomaterials and/or nanodevices capable of detecting specific antigens and antibodies with high specificity and low cost. In this paper, we present an investigation on a single-celled protozoan Leishmaniasis parasite, a disease considered of standard infectivity, given the high degree of immunological specificity. Natural rubber (NR) membranes incorporating gold nanoparticles (GNPs) were placed in the culture medium and the physiological behavior of Leishmania brasiliensis promastigotes was evaluated. The natural rubber membranes containing GNPs decreased the population growth rate, showing a lower index of living promastigotes (attached to the membrane surface) depending on the amount of nanoparticles deposited in the membrane surface. Such membranes may be used to develop a flexible band-aid for skin lesions from degenerative infection state, inhibiting the population growth of parasites in the lesions. In addition, natural rubber membranes would also stimulate angiogenesis in damaged tissues.     

Guayule and Russian Dandelion as Alternative Sources of Natural Rubber

ABSTRACT

Natural rubber, obtained almost exclusively from the Para rubber tree (Hevea brasiliensis), is a unique biopolymer of strategic importance that, in many of its most significant applications, cannot be replaced by synthetic rubber alternatives. Several pressing motives lead to the search for alternative sources of natural rubber. These include increased evidence of allergenic reactions to Hevea rubber, the danger that the fungal pathogen Microcyclus ulei, causative agent of South American Leaf Blight (SALB), might spread to Southeast Asia, which would severely disrupt rubber production, potential shortages of supply due to increasing demand and changes in land use, and a general trend towards the replacement of petroleum-derived chemicals with renewables. Two plant species have received considerable attention as potential alternative sources of natural rubber: the Mexican shrub Guayule (Parthenium argentatum Gray) and the Russian dandelion (Taraxacum koksaghyz). This review will summarize the current production methods and applications of natural rubber (dry rubber and latex), the threats to the production of natural rubber from the rubber tree, and describe the current knowledge of the production of natural rubber from guayule and Russian dandelion.     

Micromorphological characterization and label-free quantitation of small rubber particle protein in natural rubber latex

Commercial natural rubber is traditionally supplied by Hevea brasiliensis, but now there is a big energy problem because of the limited resource and increasing demand. Intensive study of key rubber-related substances is urgently needed for further research of in vitro biosynthesis of natural rubber. Natural rubber is biosynthesized on the surface of rubber particles. A membrane protein called small rubber particle protein (SRPP) is a key protein associated closely with rubber biosynthesis; however, SRPP in different plants has been only qualitatively studied, and there are no quantitative reports so far. In this work, H. brasiliensis was chosen as a model plant. The microscopic distribution of SRPP on the rubber particles during the washing process was investigated by transmission electron microscopy–immunogold labeling. A label-free surface plasmon resonance (SPR) immunosensor was developed to quantify SRPP in H. brasiliensis for the first time. The immunosensor was then used to rapidly detect and analyze SRPP in dandelions and prickly lettuce latex samples. The label-free SPR immunosensor can be a desirable tool for rapid quantitation of the membrane protein SRPP, with excellent assay efficiency, high sensitivity, and high specificity. The method lays the foundation for further study of the functional relationship between SRPP and natural rubber content.     

Improved Absorbance and Near-Infrared Dispersion of AuGe Nanoparticles over Au Nanoparticles Prepared with Similar Thermal Annealing Environment

The difficulty in patterning the structures at sub-wavelength range leads to employ the bottom-up approach to form nanostructures of metals as well as dielectric components that disperse them in host media. The optical properties of nanoparticles are studied with UV-Vis 750 (lambda) NIR spectroscopy and fit with empirical relations. The refractive index is about the volume fraction of particles. The AuGe nanoparticles demonstrate improved absorbance, lower refractive index, and higher extinction than Au nanoparticles formed with similar thermal process. Surface plasmon resonance (SPR) phenomena are highly sensitive to the bonding between atoms, atomic structure, and the electronic configuration in atoms of the given material. If one takes into account the structure of materials, then the literature on eutectic alloys predicts that alloying gold with germanium (AuGe) with varying compositions will also change the x-ray diffraction peak positions of gold itself. The peak shift can be interpreted as the change in grain size or shift in grain boundaries implying a corresponding change in material’s atomic arrangement within lattice structure. As a result, there will be a change in the charge distribution of free electron cloud in original gold ultimately affecting a change in the plasmon resonance frequency and thereby modulating the various optical phenomena such as absorbance, reflectance, and refractive index. This alloying also brings a change in the dielectric constant of the material such that the plasmonic behavior may shift among different regions (UV, visible, NIR, MWIR, and LWIR). Metal semiconductor eutectic alloy which is widely popular as a soldering material would have scope in futuristic photonic applications due to its tuneable optical properties. In this work, we study the effects of Au and AuGe nanoparticle deposition on GaAs films grown by molecular beam epitaxy (MBE). Au and AuGe thin films (12-nm thick) were annealed in the temperature ranges of 400–800 and 300–700 °C, respectively, to form Au and AuGe nanoparticles. The formation of these nanoparticles was confirmed by scanning electron microscopy (SEM) measurements. Optical absorption spectroscopy measurements showed plasmon resonance peaks at around 670 and 535 nm for the AuGe-deposited 300 °C-annealed sample and Au-deposited 600 °C-annealed sample on sapphire, respectively, thereby confirming the plasmonic effect. Correlation of Raman spectroscopy measurement results with X-ray diffraction measurement results reveal that the transverse optical mode intensity and full width at half maximum of the GaAs (400) peak increased with an increase in annealing temperature, indicating degradation of the crystalline properties of GaAs film at higher annealing temperatures. The highest increments of the photoluminescence (PL) intensities in comparison to that of the bare GaAs film were observed to be 37 and 77% for the Au-deposited 600 °C-annealed and AuGe-deposited 300 °C-annealed samples, respectively. These enhancements of PL spectra are an indication of the significant scattering of photons by Au and AuGe nanoparticles, and they are attributed mainly to the contribution of the local surface plasmon resonance of these nanoparticles. A comparative analysis of PL enhancements revealed that AuGe nanoparticles induced a greater enhancement than Au nanoparticles. The calculated activation energies of the Au-deposited 600 °C-annealed sample, AuGe-deposited 300 °C-annealed sample, and bare GaAs sample were around 18, 24, and 33 meV, respectively. We found one-order increment in peak responsivity of AuGe plasmonic-based trilayer InAs quantum dot detector in comparison to as-grown detector at 80 K. Therefore, this study is expected to be very useful in the realization of high-performance plasmonic-based optoelectronic and sensing devices.     

Biodegradation and proton exchange using natural rubber in microbial fuel cells

Microbial fuel cells (MFCs) generate electricity from waste but to date the technology’s development and scale-up has been held-up by the need to incorporate expensive materials. A costly but vital component is the ion exchange membrane (IEM) which conducts protons between the anode and cathode electrodes. The current study compares natural rubber as an alternative material to two commercially available IEMs. Initially, the material proved impermeable to protons, but gradually a working voltage was generated that improved with time. After 6 months, MFCs with natural rubber membrane outperformed those with anion exchange membrane (AEM) but cation exchange membrane (CEM) produced 109 % higher power and 16 % higher current. After 11 months, polarisation experiments showed a decline in performance for both commercially available membranes while natural rubber continued to improve and generated 12 % higher power and 54 % higher current than CEM MFC. Scanning electron microscope images revealed distinct structural changes and the formation of micropores in natural latex samples that had been employed as IEM for 9 months. It is proposed that the channels and micropores formed as a result of biodegradation were providing pathways for proton transfer, reflected by the steady increase in power generation over time. These improvements may also be aided by the establishment of biofilms that, in contrast, caused declining performance in the CEM. The research demonstrates for the first time that the biodegradation of a ubiquitous waste material operating as IEM can benefit MFC performance while also improving the reactor’s lifetime compared to commercially available membranes.     

Gamma–Radiation-Assisted Synthesis of Luminescent ZnO/Ag Heterostructure Core–Shell Nanocomposites

There is increasing interest in tuning the physical properties of semiconductor nanostructures using metal nanoparticles. In this work, ZnO nanosphere covered with Ag nanoparticles were synthesized using gamma–radiation-assisted method. The amount of deposited Ag nanoparticles is controlled by changing irradiation dose in the range of 30–100 kGy in order to tune the semiconductor–metal interaction. The successful deposition of Ag on the ZnO nanoparticles is examined by analyzing the morphology, microstructure, optical, and magnetic properties of ZnO/Ag nanoparticles through field emission scanning electron (FESEM), microscopy X-ray diffraction spectra, UV-visible absorption, photoluminescence measurement, and vibrating sample magnetometer. FESEM and elemental mapping results confirmed that Ag nanoparticles have been concentrated at the surface of spherical ZnO particles. Moreover, formation of pure metallic Ag nanoparticles has been confirmed by XRD analysis. UV-visible absorption spectra of obtained ZnO/Ag showed two combined peaks, a weak peak at the shoulder around 360 nm corresponds to ZnO and a sharp absorption at 420 nm refers to spherical Ag nanoparticles. Obtained results from photoluminescence revealed that the near-band-edge emission and defect-related visible emission bands of ZnO could be enhanced dramatically at the same time by deposition of Ag nanoparticles, which was ascribed to localized surface plasmon–exciton coupling and surface plasmon scattering. Controlling the semiconductor and metal coupling effect is interesting because of its application in highly efficient optoelectronic devices and biosensor.     

Uncovering mechanisms of rubber biosynthesis in Taraxacum koksaghyz – role of cis‐prenyltransferase‐like 1 protein

The Russian dandelion Taraxacum koksaghyz synthesizes considerable amounts of high‐molecular‐weight rubber in its roots. The characterization of factors that participate in natural rubber biosynthesis is fundamental for the establishment of T. koksaghyz as a rubber crop. The cis‐1,4‐isoprene polymers are stored in rubber particles. Located at the particle surface, the rubber transferase complex, member of the cis‐prenyltransferase (cisPT) enzyme family, catalyzes the elongation of the rubber chains. An active rubber transferase heteromer requires a cisPT subunit (CPT) as well as a CPT‐like subunit (CPTL), of which T. koksaghyz has two homologous forms: TkCPTL1 and TkCPTL2, which potentially associate with the rubber transferase complex. Knockdown of TkCPTL1, which is predominantly expressed in latex, led to abolished poly(cis‐1,4‐isoprene) synthesis but unaffected dolichol content, whereas levels of triterpenes and inulin were elevated in roots. Analyses of latex from these TkCPTL1‐RNAi plants revealed particles that were similar to native rubber particles regarding their particle size, phospholipid composition, and presence of small rubber particle proteins (SRPPs). We found that the particles encapsulated triterpenes in a phospholipid shell stabilized by SRPPs. Conversely, downregulating the low‐expressed TkCPTL2 showed no altered phenotype, suggesting its protein function is redundant in T. koksaghyz. MS‐based comparison of latex proteomes from TkCPTL1‐RNAi plants and T. koksaghyz wild‐types discovered putative factors that convert metabolites in biosynthetic pathways connected to isoprenoids or that synthesize components of the rubber particle shell.     

Ultrastructure of Laticifers Modifications in Hevea brasiliensis Infected with Root Rot Fungi

This paper presents some aspects of latex coagulation inside latice vessels of roots of Hevea brasiliensis infected by two fungi: Rigidoporus lignosus and Phellinus noxius. Three stages are described in latex coagulation: the phase of latex destabilisation characterized by the bursting of vacuoles and lysosomes membranes; the phase of latex coagulation characterized by the fusion of rubber particles and the disorganization of the cytoplasm; the formation of shots of rubber clumps indicating the final stage of coagulation.     

Regulation of Natural Rubber Biosynthesis by Proteins Associated with Rubber Particles

Natural rubber, cis-1,4-polyisoprene, is an essential raw material used in thousands of products, many of which are absolutely necessary for medical purposes. Natural rubber is obtained from latex, an aqueous emulsion present in the laticiferous vessels of the natural rubber-producing plants. Hevea brasiliensis (the Brazilian rubber tree) currently is the only commercially important source of natural rubber. H. brasiliensis crops have very little genetic variability, leaving rubber plantations at risk of serious pathogenic attacks. In addition, repeated exposure to residual proteins in latex products derived from H. brasiliensis have led to serious and widespread allergic (type I) hypersensitivity. Therefore, identification of alternative sources of natural rubber is a very important biotechnological task. Potentially, Russian dandelion (Taraxacum kok-saghyz) may be such an alternative because significant amounts of natural rubber are produced in its root system. However, H. brasiliensis is a more efficient producer of natural rubber than T. kok-saghyz. Thus, improvement of rubber biosynthesis in plants is a first-priority problem of modern biotechnology. In this review, we describe proteins that may increase the concentration of natural rubber in laticiferous vessels of T. kok-saghyz and its close relative Taraxacum brevicorniculatum, when overexpressed in the plants. These proteins, cis-prenyltransferases, rubber transferase activator, and small rubber particle proteins, are directly involved in synthesis of the polyisoprene chain. We also analyze the effects of their expression levels on the production of natural rubber in vivo.     

Carbohydrate-directed synthesis of silver and gold nanoparticles: effect of the structure of carbohydrates and reducing agents on the size and morphology of the composites

A monosaccharide (β-d-glucose) and polysaccharide (soluble starch) were used as structure directing and subsequently stabilizing agents for the synthesis of spherical nanoparticles (NPs) and nanowires of silver and gold. Homogeneous monodispersed Ag(0) nanoparticles (Ag NPs) of 15 nm diameter were obtained when 10⁻⁴ M AgNO₃ precursor salt was reduced in starch (1 wt %)–water gel by 1 wt % β-d-glucose. For a second preparation the effect of reducing agents on the synthesis of Au(0) metallic nanoparticles (Au NPs) of 2 × 10⁻⁴ M concentration prepared in a β-d-glucose (0.03 M)–water dispersion was studied first in detail. Different equivalent amounts of NaBH₄ and a number of pH values were evaluated for the reduction of the Au salt HAuCl₄·3H₂O to obtain Au NPs. The type and the amount of reducing agent, as well as the pH of the solution was shown to affect the size and morphology of the NPs. NaBH₄ (4 equiv) produced the smallest (5.3 nm (σ 0.7)) metallic particles compared to larger particles (10.0 nm (σ 1.4)) when the salt was reduced by 1 equiv of NaBH₄. Addition of excess NaBH₄ caused the NPs to settle out as a precipitate forming a mesh or wire structure rather than monodispersed particles. Low pH (pH 6) resulted in incomplete reduction, while at pH 8 the salt was completely reduced. When the salt was reduced by NaOH at pH 8, the particles were larger (14.2 nm) and less homogeneous (σ 2.8) compared to those from NaBH₄ reduction.     

Gold nanoparticles induce surface morphological transformation in polyurethane and affect the cellular response

Nanocomposites from a hexamethylene diisocyanate (HDI)-based polyester-type waterborne polyurethane (PU) containing different amounts (17.4-174 ppm) of gold (Au) nanoparticles (approximately 5 nm) were prepared. The microstructure and physiochemical properties of the nanocomposites were characterized. The cell attachment and proliferation, platelet activation, and bacterial adhesion on the nanocomposites were evaluated. Gold nanoparticles in small amounts induced significant changes in surface morphology and domain structures, from hard segment lamellae to soft segment micelles. These changes resembled the morphological transformation among different mesophases occurred in diblock copolymers. Better cellular proliferation, lower platelet activation, and reduced bacterial adhesion were demonstrated for the PU nanocomposite with 43.5 or 65 ppm of Au than the pure PU or the nanocomposite containing a different amount of Au. The different cellular response on PU-Au nanocomposites was attributed to the extensively modified surface morphology and phase separation in the presence of a small amount of Au nanoparticles.     

Microstructure of Purified Rubber Particles

Purified rubber particles from Hevea brasiliensis (Brazilian rubber tree), Parthenium argentatum (guayule), Ficus elastica (Indian rubber tree), and Euphorbia lactiflua were examined and compared using conventional scanning electron microscopy (SEM), field-emission SEM, cryo-SEM, and transmission electron microscopy (TEM). Rubber particles of all four species were spherical; they varied in size and had a uniform homogeneous material, the rubber core, surrounded by a contiguous monolayer (half-unit) membrane. Frozen-hydrated and/or untreated particles from H. brasiliensis and P. argentatum deformed and fused readily, whereas those from F. elastica and E. lactiflua retained their spherical shapes. These results indicate that the surface components of the H. brasiliensis and P. argentatum particles are more fluid than those of F. elastica or E. lactiflua. When fixed in aldehyde, F. elastica particles retained their spherical exterior shapes but had hollow centers, whereas H. brasiliensis and P. argentatum particles completely collapsed. In aldehyde-osmium tetroxide-fixed material, the rubber core of F. elastica was poorly preserved in some particles in which only a small amount of the rubber core remained adhering to the monolayer membrane, leaving a hollow center. Euphorbia lactiflua particles were well preserved in terms of retaining the rubber core; however, the membrane was not as easily discernible as it was in the other three species. Both H. brasiliensis and P. argentatum were well preserved following fixation; their cores remained filled with rubber, and their monolayer membranes were defined. The addition of potassium permanganate to the fixation-staining regime resulted in higher-contrast micrographs and more well defined monolayer membranes.     

Au nanostructures: an emerging prospect in cancer theranostics

Au nanoparticles have been used in biomedical applications since ancient times. However, the rapid development of nanotechnology over the past century has led to recognition of the great potential of Au nanoparticles in a wide range of applications. Advanced fabrication techniques allow us to synthesize a variety of Au nanostructures possessing physiochemical properties that can be exploited for different purposes. Functionalization of the surface of Au nanoparticles further eases their application in various roles. These advantages of Au nanoparticles make them particularly suited for cancer treatment and diagnosis. The small size of Au particles enables them to preferentially accumulate at tumor sites to achieve in vivo targeting after systemic administration. Efficient light absorption followed by rapid heat conversion makes them very promising in photothermal therapy. The facile surface chemistry of Au nanoparticles eases delivery of drugs, ligands or imaging contrast agents in vivo. In this review, we summarize recent development of Au nanoparticles in cancer theranostics including imaging-based detection, photothermal therapy, chemical therapy and drug delivery. The multifunctional nature of Au nanoparticles means they hold great promise as novel anti-cancer therapeutics.     

Guayule and Russian dandelion as alternative sources of natural rubber

Natural rubber, obtained almost exclusively from the Para rubber tree (Hevea brasiliensis), is a unique biopolymer of strategic importance that, in many of its most significant applications, cannot be replaced by synthetic rubber alternatives. Several pressing motives lead to the search for alternative sources of natural rubber. These include increased evidence of allergenic reactions to Hevea rubber, the danger that the fungal pathogen Microcyclus ulei, causative agent of South American Leaf Blight (SALB), might spread to Southeast Asia, which would severely disrupt rubber production, potential shortages of supply due to increasing demand and changes in land use, and a general trend towards the replacement of petroleum-derived chemicals with renewables. Two plant species have received considerable attention as potential alternative sources of natural rubber: the Mexican shrub Guayule (Parthenium argentatum Gray) and the Russian dandelion (Taraxacum koksaghyz). This review will summarize the current production methods and applications of natural rubber (dry rubber and latex), the threats to the production of natural rubber from the rubber tree, and describe the current knowledge of the production of natural rubber from guayule and Russian dandelion.     

Cloning and characterization of cDNA encoding farnesyl diphosphate synthase from rubber tree (Hevea brasiliensis)

Commercially used natural rubber (cis-1,4-polyisoprene) is a secondary metabolite of the rubber tree (Hevea brasiliensis). Previous studies have shown the involvement of a prenyl transferase in the final steps of natural rubber biosynthesis which includes polymerization of isopentenyl pyrophosphate into rubber. Using synthetic oligonucleotides corresponding to the partial amino acid sequences of this protein as probes to screen a laticifer-specific cDNA library, we have isolated a full-length cDNA which encodes a 47 kDa protein with strong homology to farnesyl diphosphate synthases from many species. The catalytic activity of this protein was confirmed by complementing the deletion yeast mutant. In Hevea, this gene is expressed in latex producing cells and in the epidermal region of the rubber plant suggesting a dual role for the protein in the biosyntheses of rubber and other isoprenoids. Although the expression level of this gene is not significantly affected by hormone treatment (e.g. ethylene), regeneration of latex due to tapping increases its expression level.     

Genotype × environment interaction of Hevea clones in traditional and non-traditional rubber growing regions of Vietnam

The main objective of this research was to assess genotype?×?environment interactions and the stability status of 24 Hevea clones along with 2 checks in terms of latex yield and girth growth under two different environmental conditions representing for traditional and non-traditional rubber growing regions of Vietnam. Genotype?×?environment interactions were found to be highly significant for both latex yield and girth at opening, indicating that the latex yield and girth growth of the studied rubber clones were significantly affected by the environmental conditions of the location. Stability analyses indicated that LH 94/359, LH 91/579 and LH 94/481 were the best clones for highest latex yield and adaptability to traditional, non-traditional and both rubber growing regions of Vietnam, respectively. In terms of girth at opening, the stability analyses revealed that these clones were also accepted as the average girth growth and adaptability to both rubber growing regions of Vietnam.