丝素蛋白在电纺丝法构建组织工程支架中的应用进展

丝素蛋白是天然高分子纤维蛋白,具有良好的物理和机械力学性能及生物相容性,因而在组织工程领域有着广阔的应用前景。文中对丝素蛋白的化学组成、分子结构特点、提取方法以及利用静电纺丝技术在组织工程化支架构建中的应用作了概述。总结了丝素蛋白在用于组织工程材料上的性能和优势以及在人工血管、皮肤、骨组织等工程化支架方面的应用情况,探讨了丝素蛋白支架对细胞在其上生长、增殖和功能的影响,同时对丝素蛋白在组织工程化食道支架及其他再生医学上的应用前景进行了展望。     

The influence of cartilage surface topography on fluid flow in the intra-articular gap

Self-lubrication of a diarthrodial joint is largely attributed to interstitial fluid pressurisation. However, the retention of synovial fluid within the intra-articular gap may also contribute to lubrication. Fluid flow in the intra-articular gap between two micro-rough cartilage surfaces was simulated with a three-dimensional numerical model. Representative surface roughness parameters were incorporated and their relative influence on gap flow resistance was quantified. Resistance changes with decreasing gap height were explored. Cartilage surface micro-topography improves the retention of viscous synovial fluid in the gap, through increased resistance to tangential flow. Local asperity contact greatly increases resistance through tortuosity of the flow path.     

Cytoplasmic calcium response to fluid shear stress in cultured vascular endothelial cells

Summary Vascular endothelial cells modulate their structure and functions in response to changes in hemodynamic forces such as fluid shear stress. We have studied how endothelial cells perceive the shearing force generated by blood flow and the substance(s) that may mediate such a response. We identify cytoplasmic-free calcium ion (Ca⁺⁺), a major component of an internal signaling system, as a mediator of the cellular response to fluid shear stress. Cultured monolayers of bovine aortic endothelial cells loaded with the highly fluorescent Ca⁺⁺-sensitive dye Fura 2 were exposed to different levels of fluid shear stress in a specially designed flow chamber, and simultaneous changes in fluorescence intensity, reflecting the intracellular-free calcium concentration ([Ca⁺⁺] _i ), were monitored by photometric fluorescence microscopy. Application of shear stress to cells by fluid perfusion led to an immediate severalfold increase in fluorescence within 1 min, followed by a rapid decline for about 5 min, and finally a plateau somewhat higher than control levels during the entire period of the stress application. Repeated application of the stress induced similar peak and plateau levels of [Ca⁺⁺] _i but at reduced magnitudes of response. These responses were observed even in Ca⁺⁺-free medium. Thus, a shear stress transducer might exist in endothelial cells, which perceives the shearing force on the membrane as a stimulus and mediates the signal to increase cytosolic free Ca⁺⁺. This work was partly supported by a grant-in-aid, for Special Project Research no. 61132008, from the Japanese Ministry of Education, Science and Culture and a research fund from the Atherosclerosis Study Association.     

Predicting permeability of regular tissue engineering scaffolds: scaling analysis of pore architecture,scaffold length,and fluid flow rate effects

The main aim of this research is to numerically obtain the permeability coefficient in the cylindrical scaffolds. For this purpose, a mathematical analysis was performed to derive an equation for desired porosity in terms of morphological parameters. Then, the considered cylindrical geometries were modeled and the permeability coefficient was calculated according to the velocity and pressure drop values based on the Darcy’s law. In order to validate the accuracy of the present numerical solution, the obtained permeability coefficient was compared with the published experimental data. It was observed that this model can predict permeability with the utmost accuracy. Then, the effect of geometrical parameters including porosity, scaffold pore structure, unit cell size, and length of the scaffolds as well as entrance mass flow rate on the permeability of porous structures was studied. Furthermore, a parametric study with scaling laws analysis of sample length and mass flow rate effects on the permeability showed good fit to the obtained data. It can be concluded that the sensitivity of permeability is more noticeable at higher porosities. The present approach can be used to characterize and optimize the scaffold microstructure due to the necessity of cell growth and transferring considerations.     

Influence of electrospun fiber mesh size on hMSC oxygen metabolism in 3D collagen matrices: experimental and theoretical evidences

The traditional paradigm of tissue engineering of regenerating in vitro tissue or organs, through the combination of an artificial matrix and a cellular population has progressively changed direction. The most recent concept is the realization of a fully functional biohybrid, where both, the artificial and the biotic phase, concur in the formation of the novel organic matter. In this direction, interest is growing in approaches taking advantage of the control at micro- and nano-scale of cell material interaction based on the realization of elementary tassels of cells and materials which constitute the beginning point for the expansion of 3D more complex structures. Since a spontaneous assembly of all these components is expected, however, it becomes more fundamental than ever to define the features influencing cellular behavior, either they were material functional properties, or material architecture. In this work, it has been investigated the direct effect of electrospun fiber sizes on oxygen metabolism of h-MSC cells, when any other culture parameter was kept constant. To this aim, thin PCL electrospun membranes, with micro- and nano-scale texturing, were layered between two collagen slices up to create a sandwich structure (μC-PCL-C and nC-PCL-C). Cells were seeded on membranes, and the oxygen consumption was determined by a phosphorescence quenching technique. Results indicate a strong effect of the architecture of scaffolds on cell metabolism, also revealed by the increasing of HIF1-α gene expression in nC-PCL-C. These findings offer new insights into the role of materials in specific cell activities, also implying the existence of very interesting criteria for the control of tissue growth through the tuning of scaffold architecture.     

急性低氧条件下大鼠循环血中内皮细胞及肺小动脉内皮细胞的改变

目的:探讨急性低氧对血管内皮细胞(VEC)和循环血液中内皮细胞(CEC)的影响.方法:用光镜观察急性低氧情况下血中CEC的形态并记数,用组织化学染色和显微分光光度计对血中年轻型CEC及肺小动脉VEC的乳酸脱氢酶(LDH)活性进行定量分析.结果:与低氧前相比,低氧后各组VEC的LDH活性均下降,且随低氧时间延长,LDH活性下降越明显.而低氧前后各组年轻型CEC的LDH活性是一致的,且明显低于各组VEC的LDH活性.低氧前CEC多为衰老型,低氧后CEC数量增多且多为年轻型,随低氧时间延长年轻型CEC增多越明显.结论:CEC的形态和数量的变化可以反映血管的损伤情况;VEC的LDH活性可以反映VEC向CEC转化的进程;年轻型CEC的LDH活性可以反映VEC脱落时的损伤程度.     

Characterization of three-dimensional bone-like tissue growth and organization under influence of directional fluid flow

The transition in the field of bone tissue engineering from bone regeneration to in vitro models has come with the challenge of recreating a dense and anisotropic bone-like extracellular matrix (ECM). Although the mechanism by which bone ECM gains its structure is not fully understood, mechanical loading and curvature have been identified as potential contributors. Here, guided by computational simulations, we evaluated cell and bone-like tissue growth and organization in a concave channel with and without directional fluid flow stimulation. Human mesenchymal stromal cells were seeded on donut-shaped silk fibroin scaffolds and osteogenically stimulated for 42 days statically or in a flow perfusion bioreactor. After 14, 28, and 42 days, constructs were investigated for cell and tissue growth and organization. As a result, directional fluid flow was able to improve organic tissue growth but not organization. Cells tended to orient in the tangential direction of the channel, possibly attributed to its curvature. Based on our results, we suggest that organic ECM production but not anisotropy can be stimulated through the application of fluid flow. With this study, an initial attempt in three-dimensions was made to improve the resemblance of in vitro produced bone-like ECM to the physiological bone ECM.     

Exploring cellular adhesion and differentiation in a micro‐/nano‐hybrid polymer scaffold

Polymer scaffolds play an important role in three dimensional (3‐D) cell culture and tissue engineering. To best mimic the archiecture of natural extracellular matrix (ECM), a nano‐fibrous and micro‐porous combined (NFMP) scaffold was fabricated by combining phase separation and particulate leaching techniques. The NFMP scaffold possesses architectural features at two levels, including the micro‐scale pores and nano‐scale fibers. To evaluate the advantages of micro/nano combination, control scaffolds with only micro‐pores or nano‐fibers were fabricated. Cell grown in NFMP and control scaffolds were characterized with respect to morphology, proliferation rate, diffentiation and adhesion. The NFMP scaffold combined the advantages of micro‐ and nano‐scale structures. The NFMP scaffold nano‐fibers promoted neural differentiation and induced “3‐D matrix adhesion”, while the NFMP scaffold micro‐pores facilitated cell infiltration. This study represents a systematic comparison of cellular activities on micro‐only, nano‐only and micro/nano combined scaffolds, and demonstrates the unique advantages of the later. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Three hours of perfusion culture prior to 28 days of static culture, enhances osteogenesis by human cells in a collagen GAG scaffold

In tissue engineering, bioreactors can be used to aid in the in vitro development of new tissue by providing biochemical and physical regulatory signals to cells and encouraging them to undergo differentiation and/or to produce extracellular matrix prior to in vivo implantation. This study examined the effect of short term flow perfusion bioreactor culture, prior to long‐term static culture, on human osteoblast cell distribution and osteogenesis within a collagen glycosaminoglycan (CG) scaffold for bone tissue engineering. Human fetal osteoblasts (hFOB 1.19) were seeded onto CG scaffolds and pre‐cultured for 6 days. Constructs were then placed into the bioreactor and exposed to 3 × 1 h bouts of steady flow (1 mL/min) separated by 7 h of no flow over a 24‐h period. The constructs were then cultured under static osteogenic conditions for up to 28 days. Results show that the bioreactor and static culture control groups displayed similar cell numbers and metabolic activity. Histologically, however, peripheral cell‐encapsulation was observed in the static controls, whereas, improved migration and homogenous cell distribution was seen in the bioreactor groups. Gene expression analysis showed that all osteogenic markers investigated displayed greater levels of expression in the bioreactor groups compared to static controls. While static groups showed increased mineral deposition; mechanical testing revealed that there was no difference in the compressive modulus between bioreactor and static groups. In conclusion, a flow perfusion bioreactor improved construct homogeneity by preventing peripheral encapsulation whilst also providing an enhanced osteogenic phenotype over static controls. Bioeng. 2011; 108:1203–1210. © 2010 Wiley Periodicals, Inc.     

Development of a 3D cell culture system for investigating cell interactions with electrospun fibers

There are many variables to be considered in studying how cells interact with 3D scaffolds used in tissue engineering. In this study we investigated the influence of the fiber diameter and interfiber spaces of 3D electrospun fiber scaffolds on the behavior of human dermal fibroblasts. Fibers of two dissimilar model materials, polystyrene and poly-L-lactic acid, with a broad range of diameters were constructed in a specifically developed 3D cell culture system. When fibroblasts were introduced to freestanding fibers, and encouraged to "walk the plank," a minimum fiber diameter of 10 microm was observed for cell adhesion and migration, irrespective of fiber material chemistry. A distance between fibers of up to 200 microm was also observed to be the maximum gap that could be bridged by cell aggregates--a behavior not seen in conventional 2D culture. This approach has identified some basic micro-architectural parameters for electrospun scaffold design and some key differences in fibroblast growth in 3D. We suggest the findings will be of value for optimizing the integration of cells in these scaffolds for skin tissue engineering.     

Progesterone enhances vascular endothelial cell migration via activation of focal adhesion kinase

The mechanisms of progesterone on endothelial cell motility are poorly investigated. Previously we showed that progesterone stimulated endothelial cell migration via the activation of actin-binding protein moesin, leading to actin cytoskeleton remodelling and the formation of cell membrane structures required for cell movement. In this study, we investigated the effects of progesterone on the formation of focal adhesion complexes, which provide anchoring sites for cell movement. In cultured human umbilical endothelial cells, progesterone enhanced focal adhesion kinase (FAK) phosphorylation at Tyr(397) in a dose- and time-dependent manner. Several signalling inhibitors interfered with progesterone-induced FAK activation, including progesterone receptor (PR) antagonist ORG 31710, specific c-Src kinase inhibitor PP2, phosphatidylinosital-3 kinase (PI3K) inhibitor wortmannin as well as ρ-associated kinase (ROCK-2) inhibitor Y27632. It suggested that PR, c-Src, PI3K and ROCK-2 are implicated in this action. In line with this, we found that progesterone rapidly promoted c-Src/PI3K/Akt activity, which activated the small GTPase RhoA/ρ-associated kinase (ROCK-2) complex, resulting in FAK phosphorylation. In the presence of progesterone, endothelial cells displayed enhanced horizontal migration, which was reversed by small interfering RNAs abrogating FAK expression. In conclusion, progesterone promotes endothelial cell movement via the rapid regulation of FAK. These findings provide new information on the biological actions of progesterone on human endothelial cells that are relevant for vascular function.     

The biased lamellipodium development and microtubule organizing center position in vascular endothelial cells migrating under the influence of fluid flow*

Summary— To analytically study the morphological responses of vascular endothelial cells (ECs) to fluid flow, we designed a parallel plate flow culture chamber in which cells were cultured under fluid shear stress ranging from 0.01 to 2.0 Pa for several days. Via a viewing window of the chamber, EC responses to known levels of fluid shear stress were monitored either by direct observations or by a video-enhanced time-lapse microscopy. Among the responses of cultured ECs to flow, morphological responses take from hours to days to be fully expressed, except for the fluid shear stress-dependent motility pattern change we reported earlier which could be detected within 30 min of flow changes. We report here that ECs exposed to more than 1.0 Pa of fluid shear shear stress have developed lamellipodia in the direction of flow in 10 min. This is the fastest structurally identifiable EC response to fluid shear stress. This was a reversible response. When the flow was stopped or reduced to the level which exerted less than 0.1 Pa of fluid shear stress, the biased lamellipodium development was lost within several minutes. The microtubule organizing center was located posterior to the nucleus in ECs under the influence of flow. However, this position was established only in ECs responding to fluid shear stress for longer than 1 h, indicating that positioning of the microtubule organizing center was not the reason for, but rather the result of, the biased lamellipodium response. Colcemid-treated ECs responded normally to flow, indicating that microtubules were not involved in both flow sensing and the flow-induced, biased lamellipodium development.     

Increased endothelial and vascular smooth muscle cell adhesion on nanostructured titanium and CoCrMo

In the body, vascular cells continuously interact with tissues that possess nanostructured surface features due to the presence of proteins (such as collagen and elastin) embedded in the vascular wall. Despite this fact, vascular stents intended to restore blood flow do not have nanoscale surface features but rather are smooth at the nanoscale. As the first step towards creating the next generation of vascular stent materials, the objective of this in vitro study was to investigate vascular cell (specifically, endothelial, and vascular smooth muscle cell) adhesion on nanostructured compared with conventional commercially pure (cp) Ti and CoCrMo. Nanostructured cp Ti and CoCrMo compacts were created by separately utilizing either constituent cp Ti or CoCrMo nanoparticles as opposed to conventional micron-sized particles. Results of this study showed for the first time increased endothelial and vascular smooth muscle cell adhesion on nanostructured compared with conventional cp Ti and CoCrMo after 4 hours' adhesion. Moreover, compared with their respective conventional counterparts, the ratio of endothelial to vascular smooth muscle cells increased on nanostructured cp Ti and CoCrMo. In addition, endothelial and vascular smooth muscle cells had a better spread morphology on the nanostructured metals compared with conventional metals. Overall, vascular cell adhesion was better on CoCrMo than on cp Ti. Results of surface characterization studies demonstrated similar chemistry but significantly greater root-mean-square (rms) surface roughness as measured by atomic force microscopy (AFM) for nanostructured compared with respective conventional metals. For these reasons, results from the present in vitro study provided evidence that vascular stents composed of nanometer compared with micron-sized metal particles (specifically, either cp Ti or CoCrMo) may invoke cellular responses promising for improved vascular stent applications.     

Expression of galectins on microvessel endothelial cells and their involvement in tumour cell adhesion

Lactoside-binding lectins (galectins) with molecular weights of about 14.5 kDa (galectin-1) and 29–35 kDa (galectin-3) bind preferentially to polylactosaminoglycan-containing glycoconjugates and have been found on the surface of tumour cells and implicated in cell-cell and cell-extracellular matrix adhesion and metastasis. We have demonstrated by immunoblotting that both galectin-1 and galectin-3 are present in extracts of endothelial cells cultured from bovine aorta, rat lung, mouse lung and mouse brain microvessels, whereas mouse hepatic sinusoidal endothelial cells expressed primarily galectin-1. These galectins were also localized by indirect immunofluorescent labelling on the surface of the different endothelial cells in culture and by immunohistochemical staining in human tissuesin vivo. Anti-galectin-1 antibodies inhibited the adhesion of liver-preferring murine RAW117-H10 large-cell lymphoma cells to hepatic sinusoidal endothelial cells or lung microvessel endothelial cellsin vitro. The data indicate that galectin-1 is expressed on the extracellular surface of endothelial cells and can mediate in part the adhesion of RAW117-H10 cells to liver microvessel endothelial cells.     

细胞生长因子对冠状动脉内皮细胞增殖与迁移的影响

目的 :观察肝细胞生长因子 (HGF)和血管内皮细胞生长因子 (VEGF)对体外培养牛冠状动脉内皮细胞(BCAEC)增殖、迁移的影响。方法 :分离和培养BCAEC ,设对照组、VEGF组、HGF组。采用四甲基偶氮唑蓝法(MTT)观察细胞增殖 ;倒置显微镜观察培养的血管内皮细胞的迁移。结果 :对照组、VEGF组、HGF组的OD值分别为 0 .2 2± 0 .0 1、0 .40± 0 .1 4、0 .44± 0 .1 5 ;VEGF组、HGF组BCAEC的增殖率分别为 81 .8%± 1 6 .9%、1 0 0 %±2 1 .1 % ;对照组BCAEC迁移不明显 ,而VEGF组和HGF组BCAEC迁移明显。结论 :VEGF、HGF能促进BCAEC增殖、迁移 ,HGF作用强度不亚于VEGF。     

Stimulation of endothelial cell migration in culture by ladsin,a laminin-5-like cell adhesion protein

Summary Ladsin is a laminin-like cell-adhesive scatter factor with potent cell motility-stimulating ability and was purified from serum-free conditioned medium of a malignant human gastric adenocarcinoma cell line STKM-1. To test its possible role in tumor angiogenesis, we investigated its effect on primary culture of endothelial cells (human umbilical vein endothelial cells) and endothelial cell line ECV304 in this study. Cell adhesion and motility effects of ladsin were observed in both types of endothelial cells. In cell-attachment assay, ladsin interacted with integrin α3β1 that was expressed on the endothelial cell surface. In Boyden chambers, ladsin stimulated both directed and random migration of ECV304 cells. Ladsin induced repair of artificial wounds generated in ECV304 cell monolayers by stimulating cell migration. Ladsin did not affect the growth rate of ECV304 cells at a low cell density but significantly increased the saturation cell density. These results suggest that ladsin may be involved in the adhesion and migration of endothelial cells under some physiological and pathological conditions.     

Up-regulation of vascular endothelial growth factor in response to glucose deprivation

Vascular endothelial growth factor (VEGF), also known as a vascular permeability factor (VPF), is an endothelial specific mitogen and is a potent inducer of angiogenesis. Recently it has been reported that hypoxia induces VEGF mRNA expression in various cells. Since both oxygen and glucose are required for efficient production of energy, we examined the effect of glucose deprivation on VEGF mRNA expression and VEGF protein production in U-937 (a human monocytic cell line) cells. Both the mRNA expression and secretion of VEGF increased after exposure to low glucose. Addition of L-glucose, the L-stereoisomer of D-glucose, did not prevent the up-regulation of VEGF expression. The conditioned medium from glucose-deprived cells, followed by supplementation with glucose, did not up-regulate VEGF mRNA expression in U-937 cells. The low glucose-induced VEGF mRNA expression returned to the control level after supplementation with D-glucose. Furthermore, oligomycin, a mitochondrial ATP synthase inhibitor, increased VEGF protein production. The results suggest that the up-regulation of VEGF mRNA in U-937 cells in response to glucose deprivation is not mediated by autocrine factors from the cells nor is the osmotic change of the medium mediated by the deficiency of glucose metabolism in the cells. Our results also suggest that the intracellular ATP depletion due to glucose deprivation may be one of the causes for increased VEGF mRNA expression. We speculate that local hypoglycemia may act as an essential trigger for angiogenesis through the VEGF gene expression.