Spectrofluorimetric determination of the anti-Covid 19 agent,remdesivir, in vials and spiked human plasma

Following the sudden widespread of the novel coronavirus (COVID-19) which first appeared in Wuhan city. Remdesivir (REM) was the first medicine licensed by the US Food and Drug Administration (FDA) for COVID-19 infected hospitalized patients. Hence, there was an urgent demand for the optimization of efficient selective and sensitive methods to be developed for the determination of REM in pharmaceuticals as well as biological samples. A sensitive and simple green spectrofluorimetric method has been developed to determine REM in pharmaceutical formulation, in addition to, spiked human plasma. The technique involves measuring the native fluorescence of REM in distilled water at 410 nm followed by excitation at 241 nm, giving a linear relationship over the range 50.00–500.00 ng/mL, and then improving the sensitivity of REM through micellar formation using 2.00% w/v sodium dodecyl sulfate (SDS). A linear relationship has been obtained over the range 10.00–350.00 ng/mL having detection and quantitation limits of 2.34 and 7.10 ng/mL, respectively. Different analytical parameters have been carefully studied. A validation study has been conducted successfully in accordance with the FDA and the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines. The developed methods' greenness was assessed utilizing a greenness profile and analytical eco-scale standards. Both methods were discovered to be environmentally friendly and could be successfully used for the determination of the studied drugs in pharmaceutical formulation and human plasma with good accuracy and high precision. As a result, the developed spectrofluorimetric methods could be ideally suited for determination of REM in quality control and medicinal laboratories.     

Validated spectrofluorimetric method for the determination of carbamazepine in pharmaceutical dosage forms after reaction with 4‐chloro‐7‐‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐Cl)

A sensitive and simple spectrofluorimetric method has been developed and validated for the determination of the anti‐epileptic drug carbamazepine (CBZ) in its dosage forms. The method was based on a nucleophilic substitution reaction of CBZ with 4‐chloro‐7‐nitrobenzo‐2‐ oxa‐1,3‐diazole (NBD‐Cl) in borate buffer (pH 9) to form a highly fluorescent derivative that was measured at 530 nm after excitation at 460 nm. Factors affecting the formation of the reaction product were studied and optimized, and the reaction mechanism was postulated. The fluorescence–concentration plot is rectilinear over the range of 0.6–8 µg/mL with limit of detection of 0.06 µg/mL and limit of quantitation of 0.19 µg/mL. The method was applied to the analysis of commercial tablets and the results were in good agreement with those obtained using the reference method. Validation of the analytical procedures was evaluated according to ICH guidelines. Copyright © 2015 John Wiley & Sons, Ltd.     

Development and validation of a sensitive spectrofluorimetric method for the determination of amoxapine in human plasma and urine

A selective and sensitive spectrofluorimetric method was developed and validated for the determination of amoxapine in human plasma and urine. The developed method is based on labeling with 5‐dimethylaminonaphthalene‐1‐sulfonyl chloride (dansyl chloride) and monitoring at 397 nm (excitation)/514 nm (emission). The method was validated for linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, recovery and robustness. The calibration curves were linear over a concentration range of 250–2500 and 50–1250 ng/mL for plasma and urine, respectively. The LOD values were calculated to be 13.31 and 13.17 ng/mL for plasma and urine, respectively. The proposed method was applied to study of amoxapine in human plasma and urine. Copyright © 2013 John Wiley & Sons, Ltd.     

Validated spectrofluorimetric method for determination of two phosphodiesterase inhibitors tadalafil and vardenafil in pharmaceutical preparations and spiked human plasma

A valid, sensitive and rapid spectrofluorimetric method has been developed and validated for determination of both tadalafil (TAD) and vardenafil (VAR) either in their pure form, in their tablet dosage forms or spiked in human plasma. This method is based on measurement of the native fluorescence of both drugs in acetonitrile at λ_em 330 and 470 nm after excitation at 280 and 275 nm for tadalafil and vardenafil, respectively. Linear relationships were obtained over the concentration range 4–40 and 10–250 ng/mL with a minimum detection of 1 and 3 ng/mL for tadalafil and vardenafil, respectively. Various experimental parameters affecting the fluorescence intensity were carefully studied and optimized. The developed method was applied successfully for the determination of tadalafil and vardenafil in bulk drugs and tablet dosage forms. Moreover, the high sensitivity of the proposed method permitted their determination in spiked human plasma. The developed method was validated in terms of specificity, linearity, lower limit of quantification (LOQ), lower limit of detection (LOD), precision and accuracy. The mean recoveries of the analytes in pharmaceutical preparations were in agreement with those obtained from the comparison methods, as revealed by statistical analysis of the obtained results using Student's t‐test and the variance ratio F‐test. Copyright © 2015 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of nomifensine in human plasma and urine by derivatization with fluorescamine

A sensitive, simple and rapid spectrofluorimetric method was developed for the determination of nomifensine in human plasma and urine. The present method was based on the derivatization by fluorescamine in phosphate buffer at pH 4.0 to produce a highly fluorescent product which was measured at 488 nm (excitation at 339 nm). The method was validated according to the ICH guidelines with respect to linearity, limit of detection, limit of quantification, accuracy, precision, recovery and robustness. The assay was linear over the concentration ranges 100–2,000 and 50–2,000 ng/mL for plasma and urine, respectively. The limits of detection were calculated to be 13.9 and 7.5 ng/mL for plasma and urine, respectively. The method was successfully applied to the analysis of the drug in human plasma and urine. Copyright © 2011 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of tobramycin in human serum and pharmaceutical preparations by derivatization with fluorescamine

A simple, sensitive and selective spectrofluorimetric method has been developed for the determination of tobramycin (TOB) in human serum and pharmaceutical preparations. The method is based on the reaction between the primary amino group of TOB and fluorescamine in borate buffer, pH 8.5, to give a highly fluorescent derivative which is measured at 469 nm after excitation at 388 nm. The fluorescence intensity was directly proportional to the concentration over the range 300–1500 ng/mL, with a limit of detection of 65 ng/mL and limit of quantitation of 215 ng/mL. All variables were investigated to optimize the reaction conditions. The method was validated according to International Conference on Harmonization guidelines in terms of specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness. Good recoveries were obtained ranging from 97.4 to 100.64%, indicating that no interference was observed from concomitants usually present in pharmaceutical dosage forms. The method was successfully, applied for the analysis of the drug substance in its pharmaceutical preparations and spiked serum samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of oseltamivir phosphate through derivatization with o‐phthalaldehyde. Application to pharmaceutical preparations with a preliminary study on spiked plasma samples

A simple and sensitive spectrofluorimetric method has been developed and validated for the determination of oseltamivir phosphate (OST) in pharmaceutical preparations. The method is based on the reaction between oseltamivir phosphate and o‐phthalaldehyde in presence of 2‐mercapto‐ethanol in borate buffer, pH 10.8, to give a highly fluorescent product measured at 450 nm after excitation at 336 nm. The different experimental parameters affecting the development and stability of the reaction product were studied and optimized. The fluorescence intensity–concentration plot is rectilinear over the range 0.05–1.0 µg/mL, with a lower detection limit of 5 ng/mL and limit of quantitation of 16 ng/mL. The developed method was successfully applied to the analysis of the drug in its commercial capsules and suspension, mean recoveries of OST were 99.97 ± 1.67% and 100.17 ± 1.18%, respectively (n = 3). Statistical comparison of the results obtained by the proposed and comparison method revealed no significant difference in the performance of the two methods regarding accuracy and precision. The proposed method was further extended to in vitro determination of the studied drug in spiked human plasma as a preliminary investigation; the mean recovery (n = 3) was 98.68 ± 5.8%. A reaction pathway was postulated. Copyright © 2012 John Wiley & Sons, Ltd.     

Micellar‐based spectrofluorimetric method for the selective determination of ledipasvir in the presence of sofosbuvir: application to dosage forms and human plasma

A fast, low‐cost, sensitive, and selective spectrofluorimetric method for the determination of ledipasvir was developed and validated. The method is based on an enhancement in the native fluorescence intensity of ledipasvir by 500% of its original value by the formation of hydrogen bonds between the cited drug and Tween‐20 in the micellar system (pH = 5.0). All fluorescence measurements were carried out at 425 nm and 340 nm for emission and excitation wavelengths, respectively. A linear relationship between the concentration of ledipasvir and the observed fluorescence intensity was achieved in the range of 0.1–2.0 μg ml^?1 with 0.028, 0.084 μg ml^?1, for detection and quantitation limits, respectively. The acquired selectivity and sensitivity using the proposed method facilitate the analysis of ledipasvir in spiked human plasma with sufficient percentage recovery (95.36–99.30%). The proposed method was developed and validated according to International Council for Harmonisation (ICH) guidelines. Moreover, the cited drug was successfully determined in its pharmaceutical dosage form using the proposed method. In addition, the validity of the proposed results was statistically confirmed using Student's t‐test, variance ratio F‐test, and interval hypothesis test.     

Sensitive spectrofluorimetric determination of tizanidine in pharmaceutical preparations,human plasma and urine through derivatization with dansyl chloride

A sensitive spectrofluorimetric method was developed for the determination of tizanidine in human plasma, urine and pharmaceutical preparations. The method is based on reaction of tizanidine with 1‐dimethylaminonaphthalene‐5‐sulphonyl chloride (dansyl chloride) in an alkaline medium to form a highly fluorescent derivative that was measured at 511 nm after excitation at 383 nm. The different experimental parameters affecting the fluorescence intensity of tizanidine was carefully studied and optimized. The fluorescence–concentration plots were rectilinear over the ranges 50–500 and 20–300 ng/mL for plasma and urine, respectively, detection limits of 1.81 and 0.54 ng/mL and quantification limits of 5.43 and 1.62 ng/mL for plasma and urine, respectively. The method presents good performance in terms of linearity, detection and quantification limits, precision, accuracy and specificity. The proposed method was successfully applied for the determination of tizanidine in pharmaceutical preparations. The results obtained were compared with a reference method, using t‐ and F‐tests. Copyright © 2011 John Wiley & Sons, Ltd.     

Spectrofluorimetric method for the determination of sulpiride in pharmaceutical preparations and human plasma through derivatization with 2‐cyanoacetamide

A sensitive and accurate spectrofluorimetric method has been developed for the determination of sulpiride in pharmaceutical preparations and human plasma. The developed method is based on the derivatization reaction of 2‐cyanoacetamide with sulpiride in 30% ammonical solution. The fluorescent derivatized reaction product exhibited maximum fluorescence intensity at 379 nm after excitation at 330 nm. The optimum conditions for derivatization reactions were studied and the fluorescence intensity versus concentration plot was found to be linear over the concentration range 0.2–20.0 µg/mL with a correlation coefficient of 0.9985. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.82 and 2.73 ng/mL, respectively. The proposed method was validated according to ICH guidelines. The effects of common excipients and co‐administered drugs were also studied. The accuracy of the method was checked using the standard addition method and percent recoveries were found to be in the range of 99.00–101.25% for pharmaceutical preparations and 97.00–97.80% for spiked human plasma. The method was successfully applied to commercial formulations and the results obtained for the proposed method were compared with a high‐performance liquid chromatography reference method and statistically evaluated using the Student's t‐test for accuracy and the variance ratio F‐test for precision. A reaction pathway was also proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

A novel solid‐phase extraction–spectrofluorimetric method for the direct determination of atenolol in human urine

A novel, simple, sensitive and selective solid‐phase extraction (SPE)–spectrofluorimetric method has been developed for the determination of atenolol (ATE) in human urine. Because an extraction procedure is required to isolate ATE or eliminate the interfering molecules present in complex human urine for the direct spectrofluorimetric determination, a pH‐sensitive poly(acrylic acid‐ethylene glycol dimethacrylate) [poly(AA‐EGDMA)] hydrogel was developed and used as a SPE adsorbent. Some factors affecting the ATE extraction efficiency, such as washing solvent type and volume, and the volume of elution solvent were optimized. Eluates from SPE cartridges were analyzed using a spectrofluorimeter (λ_ex = 277 nm and λ_em = 300 nm). The calibration graph was linear over the concentration range 0.15–4.0 µg/mL. Limit of detection (LOD) and limit of quantification (LOQ) values were found to be 0.03 and 0.10 µg/mL, respectively. Relatively high intraday [2.06%, mean relative standard deviation (RSD)] and interday (2.6%, mean RSD) precisions were achieved. High mean recovery (95.4%) and low RSD values (3.8%) were obtained for spiked ATE in human urine. The spectrofluorimetric method presented here can be easily applied to assay trace amounts of ATE in pharmaceuticals and biological samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Enhanced spectrofluorimetric determination of esomeprazole and pantoprazole in dosage forms and spiked human plasma using organized media

A simple, sensitive and rapid spectrofluorimetric method was developed for the determination of esomeprazole (EMZ) and pantoprazole (PRZ) in their pharmaceutical formulations and human plasma. The proposed method is based on the fluorescence spectral behavior of EMZ in methanol in the presence of 0.1 m NaOH containing 0.5% methyl cellulose (MC) at 306/345 nm. The fluorescence intensity of EMZ was enhanced about 1.3‐fold and good linearity in the range 0.4–4.0 µg/mL with a lower detection limit of 0.04 µg/mL and lower quantification limit of 0.14 µg/mL. For PRZ, its methanolic solution exhibited marked native fluorescence at 290/325 nm after enhancement (about 2.1‐ or 1.4‐fold) using either 0.025% sodium dodecyl sulfate (SDS) or 0.05% MC in the presence of 0.2 m borate buffer of pH 9.5. The fluorescence–concentration plots of PRZ were rectilinear over the ranges 0.2–2.0 and 0.3–3.0 µg/mL with lower detection limits of 0.02 and 0.03 µg/mL and lower quantification limits of 0.07 and 0.09 µg/mL using sodium dodecyl sulfate and MC, respectively. The method was successfully applied to the analysis of EMZ and PRZ in their commercial dosage forms and the results were in good agreement with those obtained with the comparison method. Furthermore, in a preliminary investigation, the proposed method was extended to the in vitro determination of the two drugs in spiked human plasma and the results were satisfactory. Copyright © 2014 John Wiley & Sons, Ltd.     

New spectrofluorimetric analysis of dapagliflozin after derivatization with NBD‐Cl in human plasma using factorial design experiments

A new validated spectrofluorimetric method was proposed for dapagliflozin (DGF) analysis in bulk, plexin its commercially available tablets and in spiked human plasma. The proposed spectrofluorimetric method depended on the formation of a fluorescent complex soluble in organic liquids by a substitution reaction between 4‐chloro‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐Cl) reagent and DGF in aqueous buffered solution at pH 7. The fluorescence intensity was measured at 522 nm after excitation at 453 nm. The high selectivity of the proposed method allowed analysis of DGF in dosage form and human plasma samples with average recovery values of 99.84 ± 1.38% and 98.71 ± 1.80%, respectively, without any interference from matrix components. The calibration range was 50–1000 ng ml^?1. The limit of detection (LOD) and limit of quantitation (LOQ) were 14.24 ng ml^?1 and 43.14 ng ml^?1, respectively. The estimated relative standard deviation values were lower than 2.0%, this showed the excellent precision at both levels. Factorial design was used to get the optimum method conditions for the analysis of the resulting DGF fluorescence complex in different matrices. The proposed method could be used in routine analysis of DGF in quality control laboratories. Also, it could be used to assay DGF in human plasma and be applied for pharmacokinetic investigation of DGF.     

First derivative synchronous spectrofluorimetric method for the simultaneous determination of propofol and cisatracurium besylate in biological fluids

Propofol and cisatracurium besylate have been simultaneously determined using a highly sensitive first derivative synchronous spectrofluorometric method. The method is based on measuring first derivative synchronous spectrofluorimetric amplitude at Δλ = 40 nm with a scanning rate of 600 nm/min. The different experimental parameters affecting the fluorescence intensity of the two drugs were carefully studied and optimized. The amplitude–concentration plots were rectilinear over the range 40.0–400.0 ng/mL and 20.0–280.0 ng/mL for propofol and cisatracurium, respectively with lower detection limits of 4.0 and 2.35 ng/mL and quantification limits of 12.1 and 7.1 ng/mL for propofol and cisatracurium, respectively. The proposed method was successfully applied for the determination of the two compounds in synthetic mixtures and in commercial ampoules. The high sensitivity attained using the proposed method allowed the simultaneous determination of both drugs in spiked plasma samples. The mean % recoveries in spiked human plasma (n = 3) were 96.53 ± 0.90 and 96.20 ± 1.64 for each of propofol and cisatracurium, respectively. The method was validated in compliance with International Council of Harmonization (ICH) Guidelines.     

HPLC fluorescence method for the determination of nizatidine in human plasma and its application to pharmacokinetic study

A sensitive high‐performance liquid chromatographic (HPLC) method was developed for the determination of nizatidine in human plasma. Nizatidine was derivatized by 4‐fluoro‐7‐nitrobenzofurazan (NBD‐F). Chromatographic separation was performed on a Inertsil C₁₈ column (150 mm × 4.6 mm, 5 µm) using isocratic elution by a mobile phase consisting of methanol/water (55:45) at a flow rate of 1.2 mL/min. Amlodipine was used as the internal standard (IS). Fluorescence detector was used operated at 461 nm (excitation) and 517 nm (emission), respectively. The calibration curve was linear over the range of 50–2000 ng/mL. This method was successfully applied to a pharmacokinetic study after oral administration of a dose (150 mg) of nizatidine. Copyright © 2013 John Wiley & Sons, Ltd.     

Development and validation of a spectrofluorimetric method for the quantification of ceftriaxone in pharmaceutical formulations and plasma

We describe the development and validation of a new, simple, sensitive and cost‐effective method for the determination of ceftriaxone in commercial formulations and spiked human plasma. The method proposes the conversion of ceftriaxone into a fluorescent product by reacting with ortho‐phthalaldehyde (OPA) in the presence of sulfite at room temperature. The reaction medium is buffered to pH 10 using borate buffer. The derivatized reaction product is highly fluorescent and exhibits maximum fluorescence intensity at λ_em = 386 nm after excitation at λ_ex = 324 nm. The experimental parameters affecting progress of the derivatization reaction were carefully studied and optimized. Under optimum experimental conditions, the method has an excellent correlation coefficient of 0.9984 with a broad linear range of 0.4?20 µg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 1.30 × 10^?3 and 3.90 × 10^?3 µg/mL, respectively. The interference effects of common excipients on the quantification of drug were investigated and no interference effect was observed. The proposed method has been successfully applied to the determination of ceftriaxone in pharmaceutical formulations and spiked human plasma samples. The method has been validated statistically through percent recovery studies using standard addition and by comparison with a reference HPLC method. The developed method exhibits excellent inter‐ and intraday precision. Copyright © 2013 John Wiley & Sons, Ltd.     

HPLC analysis of the novel antidepressant duloxetine in human plasma after an original solid-phase extraction procedure

Duloxetine is the most recent serotonin and norepinephrine reuptake inhibitor (SNRI) drug introduced for the therapy of depression. Thus, it is evident that there is a need for having on hand new reliable analytical methods for the determination of duloxetine plasma levels in depressed patients. The present paper deals with the development of a rapid and sensitive high-performance liquid chromatographic method for duloxetine analysis in human plasma. The assays were carried out using a C8 reversed-phase column and a mobile phase composed of 60% aqueous phosphate buffer containing triethylamine at pH 3.0 and 40% acetonitrile. The UV detector was set at 230 nm and loxapine was used as the internal standard. An original pre-treatment of plasma samples was developed, based on solid-phase extraction (SPE) with mixed-mode reversed phase-strong cation exchange cartridges (30 mg, 1 mL). The extraction yields values were higher than 90%. Linearity was found in the 2-200 ng mL(-1) duloxetine concentration range; the limit of quantitation was 2.0 ng mL(-1) and the limit of detection was 0.7 ng mL(-1). The method was applied to plasma samples from depressed patients undergoing therapy with duloxetine. Precision data and accuracy results were satisfactory and no interference from other drugs was found. Thus, the method seems to be suitable for the therapeutic drug monitoring of duloxetine in depressed patients' plasma.     

Utility of the fluorogenic characters of benzofurazan for analysis of tigecycline using spectrometric technique; application to pharmacokinetic study,urine and pharmaceutical formulations

Tigecycline (TIGE) is the newest tetracycline derivative antibiotic with low toxicity, it is used for management of infectious diseases caused by Gram‐positive and Gram‐negative bacteria. Hence, an efficient, selective and sensitive method was developed for analysis of TIGE in commercial formulations, human plasma and urine. The spectrofluorimetric technique based on the reaction of secondary amine moiety in TIGE with 4‐chloro‐7‐nitrobenzofurazan (NBD‐Cl) in slightly alkaline medium producing a highly fluorescent product measured at 540 nm (λ_ex at 470 nm) after heating for 15 min at 75°C. The proposed strategy was upgraded and approved by ICH rules and bio‐analytical validated using US‐FDA recommendations. A linear relationship between fluorescence intensity and TIGE concentration was observed over the concentration range 40–500 ng mL^?1 with limit of quantification (LOQ) 21.09 ng mL^?1 and limit of detection (LOD) 6.96 ng mL^?1.The ultra‐affectability and high selectivity of the proposed strategy permits analysis of TIGE in dosage form, human plasma and urine samples with good recovery ranged from 97.23% to 98.72% and from 99.36% to 99.80% respectively, without any interfering from matrix components. Also, the developed strategy was used to examine the stability of TIGE in human plasma and applied for pharmacokinetic investigation of TIGE.     

Utility of eosin Y as a complexing reagent for the determination of citalopram hydrobromide in commercial dosage forms by fluorescence spectrophotometry

An accurate, selective and sensitive spectrofluorimetric method was developed for the determination of citalopram hydrobromide in commercial dosage forms. The method was based on the formation of a fluorescent ion‐pair complex between citalopram hydrobromide and eosin Y in the presence of a disodium hydrogen phosphate/citric acid buffer solution of pH 3.4 that was extractable in dichloromethane. The extracted complex showed fluorescence intensity at λ_em = 554 nm after excitation at 259 nm. The calibration curve was linear over at concentrations of 2.0–26.0 µg/mL. Under optimized experimental conditions, the proposed method was validated as per ICH guidelines. The effect of common excipients used as additives was tested and the tolerance limit calculated. The limit of detection for the proposed method was 0.121 μg/mL. The proposed method was successfully applied to the determination of citalopram hydrobromide in commercial dosage forms. The results were compared with the reference RP‐HPLC method. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel validated spectrofluorimetric methods for the determination of taurine in energy drinks and human urine

Two sensitive, selective, economic and validated spectrofluorimetric methods were developed for the determination of taurine in energy drinks and spiked human urine. Method Ι is based on fluorimetric determination of the amino acid through its reaction with Hantzsch reagent to form a highly fluorescent product measured at 490 nm after excitation at 419 nm. Method ΙΙ is based on the reaction of taurine with tetracyanoethylene yielding a fluorescent charge transfer complex, which was measured at λ_ex/_em of (360 nm/450 nm). The proposed methods were subjected to detailed validation procedures, and were statistically compared with the reference method, where the results obtained were in good agreement. Method Ι was further applied to determine taurine in energy drinks and spiked human urine giving promising results. Moreover, the stoichiometry of the reactions was studied, and reaction mechanisms were postulated. Copyright © 2014 John Wiley & Sons, Ltd.