The effect of pH on chemiluminescence of different probes exposed to superoxide and singlet oxygen generators

The compromised optima for high intensity chemiluminescence (CL), using superoxide generators, were all above pH 9.0 for the CL probes luminol and lucigenin. With luminol the optima were at pH 9.0 and 9.4 for the generators KO₂ and hypoxanthine/xanthine oxidase (HX/XO), respectively. Lucigenin, with the same generators, produced optima at pH 9.5 and 10.0, respectively. The probe methyl-Cypridina-luciferin analogue (MCLA) produced optima closer to neutral pH, which is preferred for physiological assessments. MCLA had optima at pH 6.0, 8.7 and 9.5 with KO₂ and with HX/XO optima at pH 4.8, 6.0, 7.0 and 8.7. When CL was assessed at physiological pH, MCLA observed superoxide radicals with a sensitivity of 100- and 330-fold more than luminol or luicigenin respectively. For singlet oxygen, the sensitivity of MCLA at this pH was 45- and 5465-fold more than for the said probes respectively. H₂O₂ did not elicit CL between pH 4 and 9.5 with any of the probes and did not influence the production of superoxide or singlet oxygen when co-assessed. Therefore CL could only be obtained when enzymes were used as converters. The optima for the enzyme-conversion system horseradish peroxidase (HRP)/H₂O₂, and luminol, were at pH 8.0 and 9.2. Lucigenin and HRP/H₂O₂ also had a biphasic CL profile with optima at pH 7.4 and 9.6. MCLA and HRP/H₂O₂ had five optima, with the major ones at pH 6.1 and beyond 10. The optima for the myeloperoxidase/H₂O system were at 8.6 and beyond 10.0 when luminol and 0.15 mol/L NaBr were used. © 1997 John Wiley & Sons, Ltd.     

Cupric oxide nanoparticles‐enhanced chemiluminescence method for measurement of β‐lactam antibiotics

A simple, sensitive cupric oxide nanoparticles (CuO NPs) enhanced chemiluminescence (CL) method was developed for the measurement of β‐lactam antibiotics, including amoxicillin and cefazolin sodium. The method was based on suppression of the CuO NPs–luminol–H₂O₂ CL reaction by β‐lactam antibiotics. Experimental parameters that influenced the inhibitory effect of the antibiotic drugs on the CL system, such as NaOH (mol/L), luminol (µmol/L), H₂O₂ (mol/L) and CuO NPs (mg/L) concentrations, were optimized. Calibration graphs were linear and had dynamic ranges of 1.0 × 10^–6 to 8.0 × 10^–6 mol/L and 3.0 × 10^–5 to 5.0 × 10^–3 mol/L for amoxicillin and cefazolin sodium, respectively, with corresponding detection limits of 7.9 × 10^–7 mol/L and 1.8 × 10^–5 mol/L. The relative standard deviations of five replicate measurements of 5.0 × 10^–6 amoxicillin and 5 × 10^–4 cefazolin sodium were 5.43 and 5.01%, respectively. The synthesized CuO NPs were characterized by X‐ray diffraction (XRD) and transmission electronmicroscopy (TEM). The developed approach was exploited successfully to measure antibiotics in pharmaceutical preparations. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of ampicillin sodium using the cupric oxide nanoparticles–luminol–H2O2 chemiluminescence reaction

A simple and sensitive chemiluminescence (CL) method has been developed for the determination of ampicillin sodium at submicromolar levels. The method is based on the inhibitory effect of ampicillin sodium on the cupric oxide nanoparticles (CuO NPs)–luminol–H₂O₂ CL reaction. Experimental parameters affecting CL inhibition including concentrations of CuO NPs, luminol, H₂O₂ and NaOH were optimized. Under optimum conditions, the calibration plot was linear in the analyte concentration range 4.0 × 10^‐7–4.0 × 10^‐6 mol/L. The limit of detection was 2.6 × 10^‐7 mol/L and the relative standard deviation (RSD) for six replicate determinations of 1 × 10^‐6 mol/L ampicillin sodium was 4.71%. Also, X–ray diffraction (XRD) and transmission electron microscopy (TEM) analysis were employed to characterize the CuO NPs. The utility of the proposed method was demonstrated by determining ampicillin sodium in pharmaceutical preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of lophine derivatives as L‐012 (luminol analog)‐dependent chemiluminescence enhancers for measuring horseradish peroxidase and H2O2

8‐Amino‐5‐chloro‐7‐phenylpyrido[3,4‐d]pyridazine‐1,4(2H,3H)dione (L‐012) was recently synthesized as a new chemiluminescence (CL) probe; the light intensity and the sensitivity of L‐012 are higher than those of other CL probes such as luminol. Previously, our group developed four lophine‐based CL enhancers of the horseradish peroxidase (HRP)‐catalyzed CL oxidation of luminol, namely 2‐(4‐hydroxyphenyl)‐4,5‐diphenylimidazole (HDI), 2‐(4‐hydroxyphenyl)‐4,5‐di(2‐pyridyl)imidazole (HPI), 4‐(4,5‐diphenyl‐1H‐imidazol‐2‐yl)phenylboronic acid (DPA), and 4‐[4,5‐di(2‐pyridyl)‐1H‐imidazol‐2‐yl]phenylboronic acid (DPPA), and showed that DPPA was suitable for the photographic detection of HRP. In this study, we replaced luminol with L‐012 and evaluated these as L‐012‐dependent CL enhancers. In addition, to detect HRP and/or H₂O₂ with higher sensitivity, each detection condition for the L‐012–HRP–H₂O₂ enhanced CL was optimized. All the derivatives enhanced the L‐012‐dependent CL as well as luminol CL; HPI generated the highest enhanced luminescence. Under optimized conditions for HRP detection, the detection limit of HRP was 0.08 fmol. By contrast, the detection limit of HRP with the enhanced L‐012‐dependent CL using 4‐iodophenol, which is a common enhancer of luminol CL, was 1.1 fmol. With regard to H₂O₂ detection, the detection limits for enhanced CL with HPI and 4‐iodophenol were 0.29 and 1.5 pmol, respectively. Therefore, it is demonstrated that HPI is the most superior L‐012‐dependent CL enhancer. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method to detect a β2 adrenergic agonist

A new method for the detection of β₂ adrenergic agonists was developed based on the chemiluminescence (CL) reaction of β₂ adrenergic agonist with potassium ferricyanide–luminol CL. The effect of β₂ adrenergic agonists including isoprenaline hydrochloride, salbutamol sulfate, terbutaline sulfate and ractopamine on the CL intensity of potassium ferricyanide–luminol was discovered. Detection of the β₂ adrenergic agonist was carried out in a flow system. Using uniform design experimentation, the influence factors of CL were optimized. The optimal experimental conditions were 1 mmol/L of potassium ferricyanide, 10 µmol/L of luminol, 1.2 mmol/L of sodium hydroxide, a flow speed of 2.6 mL/min and a distance of 1.2 cm from ‘Y₂’ to the flow cell. The linear ranges and limit of detection were 10–100 and 5 ng/mL for isoprenaline hydrochloride, 20–100 and 5 ng/mL for salbutamol sulfate, 8–200 and 1 ng/mL for terbutaline sulfate, 20–100 and 4 ng/mL for ractopamine, respectively. The proposed method allowed 200 injections/h with excellent repeatability and precision. It was successfully applied to the determination of three β₂ adrenergic agonists in commercial pharmaceutical formulations with recoveries in the range of 96.8–98.5%. The possible CL reaction mechanism of potassium ferricyanide–luminol–β₂ adrenergic agonist was discussed from the UV/vis spectra. Copyright © 2014 John Wiley & Sons, Ltd.     

Improvement of mimetic peroxidase activity of gold nanoclusters on the luminol chemiluminescence reaction by surface modification with ethanediamine

Peroxidase is a commonly used catalyst in luminol–H₂O₂ chemiluminescence (CL) reactions. Natural peroxidase has a sophisticated separation process, short shelf life and unstable activity, therefore it is important to develop peroxidases that have both high catalytic activity and good stability as alternatives to the natural enzyme. Gold nanoclusters (Au NCs) are an alternative peroxidase with catalytic activity in the luminol–H₂O₂ CL reaction. In the present study, ethanediamine was modified on the surface of Au NCs forming cationic Au NCs. The zeta potential of the cationic Au NCs maintained its positive charge when the pH of the solution was between 4 and 9. The cationic Au NCs showed higher catalytic activity in the luminol–H₂O₂ CL reaction than did unmodified Au NCs. A mechanism study showed that the better performance of cationic Au NCs may be attributed to the generation of ¹O₂ on the surface of cationic Au NCs and a positive surface charge, for better affinity to luminol. Cationic Au NC, acting as a peroxidase mimic, has much better stability than horseradish peroxidase over a wide range of temperatures. We believe that cationic Au NCs may be useful as an artificial peroxidase for a wide range of potential applications in CL and bioanalysis.     

Myeloperoxidase-Based Chemiluminescence of Polymorphonuclear Leukocytes and Monocytes

Luminol and lucigenin chemiluminescence (CL) responses produced by separated human blood polymorphonuclear leukocytes (pmn) and monocytes (mono) have been studied following stimulation with the surface-receptor agonist fMLP (a synthetic chemotactic peptide) and the protein kinase C activator phorbol myristate acetate (PMA). Pmn produced two- to threefold the luminol CL and superoxide anion (O₂⁻) levels of mono; lucigenin CL was similar for both cell-types. The myeloperoxidase (MPO) inhibitor salicylhydroxamic acid (SHA) abrogated luminol but not lucigenin CL in both cell types, but did not further inhibit the already grossly subnormal luminol CL responses seen with MPO-deficient cells which produced normal lucigenin CL. SHA also profoundly inhibited the luminol CL response in a cell-free MPO–H₂O₂ system. Mono lucigenin CL does not appear to specifically measure O₂⁻ production. These data show that luminol CL provides a useful measure of pmn and also mono MPO activity. However, analysis of the effects of various reactive oxygen species (ROS) scavengers, assessed on phagocyte and cell-free CL systems (both MPO–H₂O₂ and superoxide generating) suggest that the luminol CL signal is not entirely dependent on MPO activity.     

Characterization of peroxidases in luminol chemiluminescence coupled with copper-catalysed oxidation of cysteamine

Hydrogen peroxide formed during the course of the copper(II)-catalysed oxidation of cysteamine with oxygen was continuously determined by a peroxidase (POD)-catalysed luminol chemiluminescence (CL) method. Horseradish peroxidase (HRP), lactoperoxidase (LPO) and Arthromyces ramosus peroxidase (ARP) were used as a CL catalyst. The respective PODs gave specific CL intensity-time profiles. HRP caused a CL delay, and ARP gave a time-response curve which followed the production rate of H₂O₂. LPO gave only a weak CL flash which decayed promptly. These differences of CL response curves could be explained in terms of the different reactivities of PODs for superoxide anion and the different formation rate of luminol radicals in the peroxidation of luminol catalysed by POD.     

Effect of colloidal β-cyclodextrins-Fe(3) O(4) magnetic nanoparticles on the chemiluminescence enhancement of luminol-Ag(III) complex for rapid and sensitive determination of cysteine in human serum

Colloidals solution of Fe₃O₄ magnetic nanoparticles (MNPs), capped with β‐cyclodextrins (β‐CD) as inclusion complexes, were found to enhance the chemiluminescence (CL) intensity of the luminol–diperiodatoargentate(III) (DPA) system. On injection of cysteine into the luminol–DPA–β‐CD–Fe₃O₄ MNPs inclusion complexes system, the CL intensity is strongly enhanced. The enhanced CL signal is ascribed to the catalytic effect of Fe₃O₄ MNPs capped with β‐CD, which is assumed to stabilize the CL intermediate. Based on these findings, a rapid and sensitive assay was developed for the determination of cysteine in human serum. The effects of analytical variables on the CL signal were studied and optimized. Under the optimum conditions, the CL intensity was directly proportional to the concentration of cysteine in the range 8.0 × 10^–9–1.0 × 10^–6 mol/L. The detection limit was 2.8 × 10^–9 mol/L (3 S_b/m) and the relative standard deviation (RSD) for 10 replicate determinations of 1.0 × 10^–7 mol/L cysteine was 3.5%. The proposed method was applied to the sensitive determination of cysteine in human serum samples, and compared with the Ellman method with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Determination of puerarin in biological samples and its application to a pharmacokinetic study by flow‐injection chemiluminescence

A simple and sensitive flow injection–chemiluminescence (FI–CL) method has been developed for the determination of puerarin, based on the fact that puerarin can greatly inhibit CL of the luminol–H₂O₂–haemoglobin system. The inhibition of CL intensity was linear to the logarithm of the concentration of puerarin in the range 0.08–10.0 μg/mL (r² = 0.9912). The limit of detection was 0.05 μg/mL (3σ) and the relative standard deviation (RSD) for 1.0 μg/mL (n = 11) of puerarin solution was 1.4%. Coupled with solid‐phase extraction (SPE) as the sample pretreatment, the determination of puerarin in biological samples and a preliminary pharmocokinetic study of puerarin in rats were performed. The recoveries for plasma and urine at three different concentrations were 89.2–110.0% and 91.4–104.8%, respectively. The pharmacokinetics of puerarin in plasma of rat coincides with the two‐compartment open model. The T_1/2α, T_1/2β, CL/F, V_Z/F, AUC_{(0 – t)}, MRT_{(0 – ∞)}, T_max and C_max were 0.77 ± 0.21 h, 7.55 ± 2.64 h, 2.43 ± 1.02 L/kg/h, 11.40 ± 3.45 L/kg, 56.67 ± 10.65 mg/h/L, 5.04 ± 2.78 h, 1.00 ± 0.35 h and 19.70 ± 4.67 μg/mL, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Microflow‐injection chemiluminescence of luminol and hypochlorite enhanced by phloxine B

We report for the first time that the sensitivity of the luminol–hypochlorite chemiluminescence (CL) reaction was enhanced approximately 10 times by the addition of phloxine B. The maximum wavelength of CL emission shifted from 431 to 595 nm in the absence and presence, respectively, of phloxine B, suggesting that an efficient chemiluminescence resonance energy transfer occurred between a luminol donor and a phloxine B acceptor in the luminol–hypochlorite–phloxine B system. Based on this observation, a simple, rapid and sensitive microflow injection CL method, using a microchip with spiral channel configurations, was developed for the determination of hypochlorite. Under optimized conditions, a linear calibration curve (R² = 0.9944) over the range 0.1–10.0 µmol/L was obtained, with a detection limit of 0.025 µmol/L (S:N = 3). The relative standard deviation (RSD) was found to be 4.2% (n = 10) for 2.5 µmol/L hypochlorite. The sample consumption was only 2 μL, with a sample throughput of 90/h. The method has been used for determining trace amounts of hypochlorite in water samples with satisfactory results. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of optimized chemiluminescence assay for determination of the antioxidant capacity of herbal extracts

A chemiluminescence (CL) assay for the determination of antioxidant capacity (AOC) has been optimized and applied to analyses of herbal extracts in the present study. The optimal concentrations of reagents (luminol, H₂O₂, horseradish peroxidase) have been determined, as well as the optimal reaction conditions (wavelength, pH, temperature, sample volume). All of the measurements were performed at the emission maximum of the oxidized form of luminol (425 nm). The optimal concentrations of the reagents were determined as follows: 1.6 mmol/L luminol, 7.5 mmol/L H₂O₂ and 0.14 U/mL horseradish peroxidase activity in the reaction mixture. Analyses were carried out in phosphate buffer, pH 7.4, at room temperature. With the optimized CL assay, the AOCs of various water and methanol herbal extracts were determined (dog rose hips, plantain leaves and coltsfoot and thyme flowers) and the results were compared to those obtained by other classical methods for the evaluation of antioxidants. Strong correlations (r > 0.9) with the Folin–Ciocalteau assay and the 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH)^● assay are confirmed, although there is no correlation between AOC and the concentration of ascorbic acid in the samples analysed. This optimized CL assay is simple, rapid and reliable, and it represents a good alternative to classical methods (Folin–Ciocalteau, DPPH^●) for the determination of AOC of herbal extracts and other food samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Study on the reaction mechanism and the static injection chemiluminescence method for detection of acetaminophen

Acetaminophen, also called paracetamol, is found in Tylenol, Excedrin and other products as over–the‐counter medicines. In this study, acetaminophen as a luminol signal enhancer was used in the chemiluminescence (CL) substrate solution of horseradish peroxidase (HRP) for the first time. The use of acetaminophen in the luminol–HRP–H₂O₂ system affected not only the intensity of the obtained signal, but also its kinetics. It was shown that acetaminophen was to be a potent enhancer of the luminol–HRP–H₂O₂ system. A putative enhancement mechanism for the luminol–H₂O₂–HRP–acetaminophen system is presented. The resonance of the nucleophilic amide group and the benzene ring of acetaminophen structure have a great effect on O‐H bond dissociation energy of the phenol group and therefore on phenoxyl radical stabilization. These radicals act as mediators between HRP and luminol in an electron transfer reaction that generates luminol radicals and subsequently light emission, in which the intensity of CL is enhanced in the presence of acetaminophen. In addition, a simple method was developed to detect acetaminophen by static injection CL based on the enhanced CL system of luminol–H₂O₂–HRP by acetaminophen. Experimental conditions, such as pH and concentrations of substrates, have been examined and optimized. The proposed method exhibited good performance, the linear range was from 0.30 to 7.5 mM, the relative standard deviation was 1.86% (n = 10), limit of detection was 0.16 mM and recovery was 99 ± 4%. Copyright © 2013 John Wiley & Sons, Ltd.     

A chelate complex‐enhanced luminol system for selective determination of Co(II), Fe(II) and Cr(III)

A determination method for Co(II), Fe(II) and Cr(III) ions by luminol‐H₂O₂ system using chelating reagents is presented. A metal ion‐chelating ligand complex with a Co(II) ion and a chelating reagent like ethylenediaminetetraacetic acid (EDTA) produced highly enhanced chemiluminescence (CL) intensity as well as longer lifetime in the luminol‐H₂O₂ system compared to metals that exist as free ions. Whereas free Cu(II) and Pb(II) ions had a strong catalytic effect on the luminol‐H₂O₂ system, significantly, the complexes of Cu(II) and Pb(II) with chelating reagents lost their catalytic activity due to the chelating reagents acting as masking agents. Based on the observed phenomenon, it was possible to determine Co(II), Fe(II) and Cr(III) ions with enhanced sensitivity and selectivity using the chelating reagents of the luminol‐H₂O₂ system. The effects of ligand, H₂O₂ concentration, pH, buffer solution and concentrations of chelating reagents on CL intensity of the luminol‐H₂O₂ system were investigated and optimized for the determination of Co(II), Fe(II) and Cr(III) ions. Under optimized conditions, the calibration curve of metal ions was linear over the range of 2.0 × 10^‐8 to 2.0 × 10^‐5 M for Co(II), 1.0 × 10^‐7 to 2.0 × 10^‐5 M for Fe (II) and 2.0 × 10^‐7 to 1.0 × 10^‐4 M for Cr(III). Limits of detection (3σ/s) were 1.2 × 10^‐8, 4.0 × 10^‐8 and 1.2 × 10^‐7 M for Co(II), Fe(II) and Cr(III), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Chemiluminescence of off‐line and on‐line gold nanoparticle‐catalyzed luminol system in the presence of flavonoid

It was found that flavonoids could remarkably inhibit the chemiluminescence (CL) intensity of an off‐line gold nanoparticle (AuNP)‐catalyzed luminol–H₂O₂ CL system. By contrast, flavonoids enhanced the CL intensity of an on‐line AuNP‐catalyzed luminol–H₂O₂ CL system. In the off‐line system, the AuNPs were prepared beforehand, whereas in the on‐line system, AuNPs were produced by on‐line mixing of luminol prepared in a buffer solution of NaHCO₃ ? Na₂CO₃ and HAuCl₄ with no need for the preliminary preparation of AuNPs. The on‐line system had prominent advantages over the off‐line system, namely a lowering of the background noise and improvements in the stability of the CL system. The results show that differences in the signal suppression effect of flavonoids on the off‐line AuNP‐catalyzed CL system are influenced by the combined action of a free radical scavenging effect and occupy‐sites function; the latter was proved to be predominant using controlled experiments. Enhancement of the on‐line system was ascribed to the presence of flavonoids promoting the on‐line formation of AuNPs, which better catalyzed the luminol–H₂O₂ CL reaction, and the enhancement activity of the six flavonoids increased with the increase in reducibility. This work broadens the scope of practical applications of an AuNP‐catalyzed CL system.     

Flow injection chemiluminescence determination of naphazoline hydrochloride in pharmaceuticals

A simple and sensitive flow injection chemiluminescence (FI‐CL) method was developed for the determination of naphazoline hydrochloride (NPZ). The method is based on the enhancing effect of NPZ on the weak CL signal from the reaction of KIO₄ with H₂O₂. Experimental parameters that affected the CL signal, including the pH of the KIO₄ solution, concentrations of KIO₄, H₂O₂ and disodium‐EDTA and flow rate were optimized. Under the optimum conditions, the increment of CL intensity was linearly proportional to the concentration of NPZ in the range 5.0 × 10^?6 to 70 × 10^?6 mol/L. The detection limit was 1.0 × 10^?6 mol/L and the relative standard deviation for 50 × 10^?6 mol/L NPZ solution was 2.8% (n = 11). In addition, a high throughput of 120 samples/h was achieved. The utility of this method was demonstrated by determining NPZ in pharmaceuticals. Copyright © 2013 John Wiley & Sons, Ltd.     

Prospects for using a new sequential chemiluminescence strategy for monitoring the caffeine content in soft and energy drinks via the catalytic activities of different nano‐metal oxides

This article suggests a new sequential injection analysis chemiluminescence (SIA‐CL) strategy for monitoring the caffeine (CAF) content in soft and energy drinks using the catalytic activities of different nano‐metal oxides. The present study describes three different SIA‐CL systems (luminol–ferricyanide (III) coupled with Fe₂O₃ or ZnO nanoparticles (NPs), and luminol–H₂O₂ coupled with CuONPs. All experimental conditions were optimized and the linear concentration ranges of pure CAF were evaluated using the calibration graphs. The selectivity of the developed SIA‐CL systems was studied under the influence of various interfering species that may be present in soft or energy drinks such as sodium ions, sucrose, glucose, sodium benzoate, sodium citrate, riboflavin, niacin, citric, phosphoric and ascorbic acids. International Council for Harmonization (ICH) guidelines were obeyed for the validation of the suggested CL methods. The developed SIA‐CL systems displayed linear relationships over the concentration ranges 1.0–350, 5.0–400 and 10.0–400 μg ml^?1 with Fe₂O₃ NPs, ZnO NPs and CuO NPs, respectively. The recorded lower limits of detection and quantification were 0.7, 2.7 and 7.8 μg ml^?1, and 1.0, 5.0 and 10.0 μg ml^?1 for the previously mentioned SIA‐CL systems. The results revealed high selectivity for CAF determination and were in good agreement with those obtained by other reported methods.     

Pyrophosphate as substrate for alkaline phosphatase activity: A convenient flow‐injection chemiluminescence assay

A sensitive and convenient flow‐injection chemiluminescence (FI‐CL) turn‐on assay for alkaline phosphatase (ALP) activity without any label and synthesis is developed. Cu²⁺ can catalyze the luminol–H₂O₂ CL reaction. Pyrophosphate (PPi) can chelate Cu²⁺ and therefore the Cu²⁺‐mediated luminol‐H₂O₂ CL reaction is inhibited. The addition of ALP can catalyze the hydrolysis of PPi into phosphate ions, Cu²⁺ is released and the chemiluminescence recovers. A detection limit of 1 mU/mL ALP is obtained.     

Determination of organophosphate flame retardant tris(2-chloroethyl)phosphine based on the luminol–H2O2 chemiluminescence system

Organophosphorus flame retardants (OPFRs) are new types of environmental pollutants, therefore the rapid and sensitive detection of OPFRs is a very important objective. A new experimental phenomenon was found in which tris(2-chloroethyl)phosphine (TCEP), a type of OPFR, could effectively enhance the signal of the luminol–H₂O₂ chemiluminescence (CL) system. Combined with the controllability of flow injection analysis, a rapid, stable, and sensitive CL method was established. The CL intensity responded linearly to the concentration of TCEP in the range 0.5–100 μg/L (R² = 0.999) with a low detection limit of 33 ng/L. Relative standard deviation (RSD) was 2.2% (n = 7, c = 100 μg/L). Water samples were labelled and recycled with RSDs of 1.1–5.7% and recoveries of 88.7–116.1%. Based on these results, this study established a new CL detection method for the environmental pollutant TCEP.