Intense visible multicolored luminescence from lanthanide ion‐pair codoped NaGdF4 nanocrystals

Lanthanide ion‐pair (Eu³⁺/Tb³⁺, Dy³⁺/Tb³⁺, Sm³⁺/Tb³⁺ and Eu³⁺/Dy³⁺) codoped NaGdF₄ nanocrystals using Ce³⁺ as the sensitizer were prepared via the polyol method. The nanocrystals with different codoped lanthanide ion‐pairs retain their individual optical properties and the combined spectra can be detected using single‐wavelength excitation at about 251 nm. The combined spectra intensity ratios can be adjusted through control of the doping ions molar ratios. Excited with a UV lamp at 254 nm, the as‐prepared nanocrystals in aqueous solution emit intense visible emissions of different colors. The nanocrystals were coated with SiO₂, to make them biocompatible. Copyright © 2009 John Wiley & Sons, Ltd.     

Luminescent properties and energy transfer in the green phosphors LaBSiO5:Tb3+,Ce3+

LaBSiO₅ phosphors doped with Ce³⁺ and Tb³⁺ were synthesized using the conventional solid‐state method at 1100 °C. The phase purity and luminescent properties of these phosphors are investigated. LaBSiO₅:Tb³⁺ phosphors show intense green emission, and LaBSiO₅ phosphors doped with Ce³⁺ show blue–violet emission under UV light excitation. LaBSiO₅ phosphors co‐doped with Ce³⁺ and Tb³⁺ exhibit blue–violet and green emission under excitation by UV light. The blue–violet emission is due to the 5d–4f transition of Ce³⁺ and the green emission is ascribed to the ⁵D₄ → ⁷ F₅ transition of Tb³⁺. The spectral overlap between the excitation band of Tb³⁺ and the emission band of Ce³⁺ supports the occurrence of energy transfer from Ce³⁺ to Tb³⁺, and the energy transfer process was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of green emissive terbium(III) complexes for displays: Optical,electrochemical and photoluminescent analysis

A series of heteroleptic terbium(III) complexes with fluorinated 2-thenoyltrifluoroacetone (TTFA) and other heteroaromatic units have been synthesized. The developed heteroleptic complexes were inspected via elemental study, cyclic voltammetry, thermal analysis and spectroscopic investigations. Optical band-gap data proposed the conducting property of prepared complexes. The photoluminescence emission profiles illustrated peaks based on terbium(III) cation (Tb³⁺) positioned at ~617, 586, 546 and 491 nm, imputed to ⁵D₄ to ⁷F_J (J = 3,4,5,6) transitions separately. Most intense peak at 546 nm corresponding to ⁵D₄ → ⁷F₅ transition is accountable for the green emissive character of developed complexes. The luminous character of complexes reveals the sensitization of Tb³⁺ by ligands. Color parameters further corroborates the green emanation of Tb³⁺ complexes. The photometric characteristics of complexes recommended their usages in designing display devices.     

Luminescence and dosimetry approach in terbium(III)-activated tungstate double perovskite

A series of tungstate double perovskite Ca₃WO₆ doped with Tb³⁺ was prepared by a combustion process using urea as a flux. The crystal structure identification of Ca₃WO₆:Tb³⁺ phosphors was done using X-ray diffraction patterns, and a monoclinic structure was discovered. The Fourier transform infrared spectrum of Ca₃WO₆:Tb³⁺ displayed characteristic vibrations of tungstate bonds. Under 278 nm excitation, Ca₃WO₆:Tb³⁺ exhibited intense downconversion green emission, which corresponded to the ⁵D₄–⁷F_J (J = 4,5) transitions of Tb³⁺. The phosphor exhibited the highest photoluminescence (PL) intensity when it was doped with 1 mol% of Tb³⁺; later intensity quenching appeared to be due to the multipolar interaction at higher dopant concentrations. Moreover, high-quality thermoluminescence (TL) was detected when phosphors were irradiated using beta rays. The effects of Tb³⁺ concentration and beta dose on TL intensity were the two major aspects studied in detail. The TL intensity demonstrated excellent linear response to the applied range of beta dose. The trap parameters of the studied phosphors were computed by the peak shape approach and glow curve deconvolution. The fading effect on TL intensity was studied by recording the TL glow curves after 1 month of beta irradiation. Obtained results from the PL and TL characterizations showed that the phosphors under study have the potential to be used in lighting displays and in thermoluminescence dosimetry.     

Fluorimetric determination of febuxostat in dosage forms and in real human plasma via Förster resonance energy transfer

A rapid, simple, selective and precise fluorimetric method was developed and validated for determination of a selective xanthine oxidase inhibitor; febuxostat (FBX) in pharmaceutical formulations and in human plasma. The proposed method is based on quenching effect of FBX on the fluorescence intensity of terbium (Tb³⁺) through fluorescence resonance energy transfer (FRET) from Tb³⁺ to FBX. The formed complex was measured at λ_ex. 320 nm/λ_em. 490 nm against a reagent blank. Fluorescence intensity of Tb³⁺ was diminished when FBX was added. A linear relationship between the fluorescence quenching value of the formed complex and the concentration of FBX was investigated. The reaction conditions and the fluorescence spectral properties of the complex have been studied. The linearity range of the developed method was 1.0–16.0 μg/ml. The suggested method was applied successfully for the estimation of FBX in bulk powder, dosage forms and spiked plasma samples with excellent recoveries (96.79–98.89%). In addition, the developed method has been successfully applied for determination of FBX in real plasma samples collected from healthy volunteers with good recoveries (82.06–85.65%). All obtained results of the developed method were statistically analyzed and validated according to ICH (International Conference on Harmonization) guidelines.     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Energy transfer between Ce3+ → Gd3+ or Tb3+ in KNaSO4 microphosphor

KNaSO₄ microphosphor doped with Ce,Gd and Ce,Tb and prepared by a wet chemical method was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) characterization. KNaSO₄ has a 5‐µm particle size detected by SEM. KNaSO₄:Ce³⁺,Tb³⁺ showed blue and green emission (at 494 nm, 557 nm, 590 nm) of Tb³⁺ due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. KNaSO₄:Ce³⁺,Gd³⁺ showed luminescence in the ultraviolet (UV) light region at 314 nm for an excitation at 271 nm wavelength. It was observed that efficient energy transfer took place from Ce³⁺ → Gd³⁺ and Ce³⁺ → Tb³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Gd³⁺ or Tb³⁺ (green emission). Ce³⁺ emission weakened and Gd³⁺ or Tb³⁺ enhanced the emission significantly in KNaSO₄. This paper discusses the development and understanding of photoluminescence and the effect of Tb³⁺ and Gd³⁺ on KNaSO₄:Ce³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure and photoluminescent properties of green‐emitting terbium‐doped GdV1−xPxO4 phosphor prepared by solution combustion method

Terbium‐doped gadolinium orthovanadate (GdVO₄:Tb³⁺), orthophosphate monohydrate (GdPO₄·H₂O:Tb³⁺) and orthovanadate–phosphate (GdV,PO₄:Tb³⁺) powder phosphors were synthesized using a solution combustion method. X‐Ray diffraction analysis confirmed the formation of crystalline GdVO₄, GdPO₄·H₂O and GdV,PO₄. Scanning electron microscopy images showed that the powder was composed of an agglomeration of particles of different shapes, ranging from spherical to oval to wire‐like structures. The chemical elements present were confirmed by energy dispersive spectroscopy, and the stretching mode frequencies were determined by Fourier transform infrared spectroscopy. UV–visible spectroscopy spectra showed a strong absorption band with a maximum at 200 nm assigned to the absorption of VO₄^3? and minor excitation bands assigned to f → f transitions of Tb³⁺. Four characteristic emission peaks were observed at 491, 546, 588 and 623 nm, and are attributed to ⁵D₄ → ⁷F_j (j = 6, 5, 4 and 3). The photoluminescent prominent green emission peak (⁵D₄ → ⁷F₅) was centred at 546 nm. The structure and possible mechanism of light emission from GdV_1?xP_xO₄:% Tb³⁺ are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Crystallographic,morphological and photoluminescent investigations of Tb3+-doped YAlO3 perovskites for lighting applications

Terbium(III)-doped yttrium aluminate perovskite (YAP:xTb³⁺) (x = 0.01–0.08 mol) was synthesized using a simple gel-combustion method. Structural elucidations were performed using X-ray diffraction (XRD) and Rietveld analysis. Fourier-transform infrared spectral studies validated the efficient synthesis of designed doped samples. Transmission electron microscopic images showed the agglomerated irregular dimensions of the synthesized nanocrystalline materials. When excited at 251 nm, a strong emissive line attributed to ⁵D₄ → ⁷F₅ electronic transition was observed at 545 nm (green emission). The maximum luminescence was found at the optimized concentration (0.05 mol) of Tb³⁺ ions; this emission was quenched by dipolar–dipolar (d–d) interactions. Chromaticity (x and y) and correlated colour temperature parameters were obtained by analysing the emission profiles. Finally, the colour coordinates of nanophosphors were closer to the National Television Standards Committee green coordinates, which replicates their potency in the design and architecture of R-G-B-based white LEDs.     

Sensitive determination of DNA based on the interaction between prulifloxacin–terbium(III) complex and DNA

A simple spectrofluorimetric method is described for the determination of DNA, based on its enhancement of the fluorescence intensity of prulifloxacin (PUFX)–Tb³⁺. The luminescence intensity of the PUFX–Tb³⁺ complex increased up to 10‐fold after adding DNA. The excitation and emission wavelengths were 345 and 545 nm, respectively. Under optimum conditions, variations in the fluorescence intensity showed a good linear relationship with the concentration of hsDNA in the range of 3.0 × 10^‐9 to 1.0 × 10^‐6 g/mL, with a correlation coefficient (R) of 0.997, and the detection limit was 2.1 × 10^‐9 g/mL. The method was successfully applied to the determination of DNA in synthetic samples, and recoveries were in the range 97.3–102.0%. The mechanism of fluorescence enhancement of the PUFX–Tb³⁺ complex by DNA is also discussed. The mechanism may involve formation of a ternary complex mainly by intercalation binding together with weak electrostatic interaction, which will increase the energy transition from ligand to Tb³⁺, increasing the rigidity of the complex, and decreasing the radiationless energy loss through O–H vibration of the H₂O molecule in the PUFX–Tb³⁺ compl+osed method is not only more robust and friendly to the environment, but also of relatively higher sensitivity. Copyright © 2013 John Wiley & Sons, Ltd.     

The effects of charge compensation on photoluminescence properties of a new green‐emitting ZnB2O4:Tb3+ phosphor

Charge compensation is an effective way to eliminate charge defects and improve the luminescent intensity of phosphors. In this paper, a new green‐emitting phosphor ZnB₂O₄:Tb³⁺ was prepared by solid‐state reaction at 750°C. The effects of Tb³⁺ doping content and charge compensators (Li⁺, Na⁺ or K⁺) on photoluminescence properties of ZnB₂O₄:Tb³⁺ were investigated. X‐ray powder diffraction analysis confirms the sample has cubic structure of ZnB₂O₄. The excitation and emission spectra indicate that this phosphor can be excited by near ultraviolet light at 378 nm, and exhibits bright green emission with the highest peak at 544 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The critical quenching concentration of Tb³⁺ in ZnB₂O₄ host is 8 mol%. The results of charge compensation show that the emission intensity can be improved by Na⁺ and K⁺. Specifically, K⁺ is the optimal one for ZnB₂O₄:Tb³⁺. Copyright © 2014 John Wiley & Sons, Ltd.     

Calmodulin tagging provides a general method of using lanthanide induced magnetic field orientation to observe residual dipolar couplings in proteins in solution

A general method is presented for magnetic field alignment of proteins in solution. By tagging a target protein with calmodulin saturated with paramagnetic lanthanide ions it is possible to measure substantial residual dipolar couplings (RDC) whilst minimising the effects of pseudocontact shifts on the target protein. A construct was made consisting of a calmodulin-binding peptide (M13 from sk-MLCK) attached to a target protein, dihydrofolate reductase in this case. The engineered protein binds tightly to calmodulin saturated with terbium, a paramagnetic lanthanide ion. By using only a short linker region between the M13 and the target protein, some of the magnetic field alignment induced in the CaM(Tb^{3 +})₄ is effectively transmitted to the target protein (DHFR). ¹H-¹⁵N HSQC IPAP experiments on the tagged complex containing ¹⁵N-labelled DHFR-M13 protein and unlabelled CaM(Tb^{3 +})₄ allow one to measure RDC contributions in the aligned complex. RDC values in the range +4.0 to –7.4 Hz were measured at 600 MHz. Comparisons of ¹H-¹⁵N HSQC spectra of ¹⁵N-DHFR-M13 alone and its complexes with CaM(Ca^{2 +})₄ and CaM(Tb³⁺)₄ indicated that (i) the structure of the target protein is not affected by the complex formation and (ii) the spectra of the target protein are not seriously perturbed by pseudocontact shifts. The use of a relatively large tagging group (CaM) allows us to use a lanthanide ion with a very high magnetic susceptibility anisotropy (such as Tb³⁺) to give large alignments while maintaining relatively long distances from the target protein nuclei (and hence giving only small pseudocontact shift contributions).     

Terbium binding to troponin C: Binding stoichiometry and structural changes induced in the protein

Terbium (Tb³⁺) binding to skeletal muscle troponin C was studied by fluorescence spectroscopy and circular dichroism. Titrations indicate that Tb³⁺, like Ca²⁺, preferentially binds to the two high affinity Ca²⁺-Mg²⁺ sites (III and IV) inducing structural changes similar to those induced by Ca²⁺. Tb³⁺ readily displaces Ca²⁺ from these sites suggesting a K_(Tb³⁺) ≥ 10⁹ M^?1 In 6 M urea, both Ca²⁺ and Tb³⁺ bind preferentially to a single site on troponin C. The spectral changes suggest this to be site III.     

Influence of rare earth elements (Y,Gd and Lu) on the luminescent properties of green phosphor ZnMoO4:Tb3+

(Zn,Ln_x)MoO₄:Tb³⁺ (Ln = Y³⁺, Gd³⁺ and Lu³⁺) were prepared using the co‐precipitation method. Phase impurity, morphology and composition were investigated by power X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The experimental results show that crystal structure is not destroyed after doping an appropriate amount of Y³⁺, Gd³⁺ and Lu³⁺. EDS analysis reveals that Y, Gd and Lu have been successfully doped into ZnMoO₄. In addition, the morphology of the phosphors is notably improved, exhibiting homogeneous dispersion morphology and irregular shapes of particle size ~ 0.5–1 µm. The luminescent intensity of (Zn,Ln_x)MoO₄:Tb³⁺ (Ln = Y³⁺, Gd³⁺ and Lu³⁺) phosphor is obviously higher than that of ZnMoO₄:Tb³⁺ phosphor. The energy transfer process between trivalent rare earth ions indicates that the inert earth ions can act as an energy bridge from MoO₄^2‐ to Tb³⁺. Copyright © 2013 John Wiley & Sons, Ltd.     

White light emission and energy transfer of LaMgAl11O19:Eu3+, Tb3+ phosphors

White-light-tunable LaMgAl₁₁O₁₉:x%Tb³⁺, y%Eu³⁺ series phosphors were prepared using the gel-combustion method. The structure and luminescence properties were studied, and the energy transfer of Eu³⁺ and Tb³⁺ in the LaMgAl₁₁O₁₉ system was also discussed. The results showed that the LaMgAl₁₁O₁₉ matrix exhibited strong emission in the blue-light region under the excitation of ultraviolet light, which resulted in conditions suitable for the preparation of white-light-tunable phosphors. The emission spectra of LaMgAl₁₁O₁₉:2%Tb³⁺, y%Eu³⁺ (y = 2%–9%) series phosphors were obtained through optimization experiments. It could be seen from the CIE diagram that by adjusting the doping quantities of Eu³⁺ and Tb³⁺ in the LaMgAl₁₁O₁₉ host, multicolor luminescence and white light emission in a single host could be achieved. By calculating the energy transfer efficiency and critical distance between Eu³⁺ and Tb³⁺ series phosphors, the mechanism of energy transfer between Tb³⁺ and Eu³⁺ was found to be the interaction between electric quadruples.     

Electrospinning preparation and photoluminescence properties of Y3Al5O12:Tb3+ nanostructures

Novel nanostructures of Y₃Al₅O₁₂:Tb³⁺ (denoted as YAG:Tb³⁺ for short) nanobelts and nanofibers were fabricated by calcination of the respective electrospun PVP/[Y(NO₃)₃ + Tb(NO₃)₃ + Al(NO₃)₃] composite nanobelts and nanofibers. YAG:Tb³⁺ nanostructures are cubic in structure with a space group of I_a3d. The thickness and width of the YAG:7%Tb³⁺ nanobelts are respectively ca. 125 nm and 5.9 ± 0.3 µm, and the diameter of YAG:7%Tb³⁺ nanofibers is 166.0 ± 20 nm (95% confidence level). The YAG:Tb³⁺ nanostructures emit predominantly at 544 nm from the energy levels transition of ⁵D₄ → ⁷ F₅ of Tb³⁺ ions under the excitation of 274‐nm ultraviolet light. It was found that the optimum doping molar concentration of Tb³⁺ ions for YAG:Tb³⁺ nanostructures was 7%. Compared with YAG:7%Tb³⁺ nanofibers, YAG:7%Tb³⁺ nanobelts exhibit a stronger photoluminescence (PL) intensity under the same doping concentration. Commission International de l'Eclairage (CIE) analysis demonstrates that the emitting colors of YAG:Tb³⁺ nanostructures are located in the green region and color‐tuned luminescence can be obtained by changing the doping concentration of Tb³⁺ and morphologies of the nanostructures, which could be applied in the field of optical telecommunication and optoelectronic devices. The possible formation mechanisms of YAG:Tb³⁺ nanobelts and nanofibers are also proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Tunable luminescence properties and energy transfer in LaAl11O18:Eu,Tb phosphor

Eu²⁺ and Tb³⁺ singly doped and co‐doped LaAl₁₁O₁₈ phosphors were prepared by a combustion method using urea as a fuel. The phase structure and photoluminescence (PL) properties of the prepared phosphors were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence excitation and emission spectra. When the content of Eu²⁺ was fixed at 0.01, the emission chromaticity coordinates could be adjusted from blue to green region by tuning the contents of Tb³⁺ ions from 0.01 to 0.03 through an energy transfer (ET) process. The fluorescence data collected from the samples with different contents of Tb³⁺ into LaAl₁₁O₁₈: Eu, show the enhanced green emission at 545 nm associated with ⁵D₄ –⁷F₅ transitions of Tb³⁺. The enhancement was attributed to ET from Eu²⁺ to Tb³⁺, and therefore Eu²⁺ ion acts as a sensitizer (an energy donor) while Tb³⁺ ion as an activator. The ET from Eu²⁺ to Tb³⁺ is performed through dipole–dipole interaction. The ET efficiency and critical distance were also calculated. The present Eu²⁺–Tb³⁺ co‐doped LaAl₁₁O₁₈ phosphor will have potential application for UV convertible white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

A sensitive method for determination of trace amounts of chromate (III) with terbium (III) sodium hexametaphosphate chelate as fluorescent probe

Based on the fluorescence quenching of Terbium (III)‐sodium hexametaphosphate (Tb/SHMP) chelates in the presence chromate (III), a sensitive fluorimetric method was developed for the determination of trace amounts of chromium (III) in aqueous solutions. Under the optimum conditions, the linear calibration graph was obtained (R = 0.996). The linear range and detection limit of Cr (III) were 7.69 × 10^?7 to 1.15 × 10^?4 mol L^?1 and 4.50 × 10^?7 mol L^?1, respectively. The proposed method had a wider linear range and was proved to be very sensitive, rapid and simple. The method was applied successfully to the determination of chromium (III) in the synthetic samples and real water samples. Moreover, the reaction mechanism was discussed through the fluorescence lifetime and proved to be dynamic quenching behavior. Copyright © 2010 John Wiley & Sons, Ltd.     

Unclonable fluorescence of MgO-ZrO2:Tb3+ nanocomposite for versatile applications in data security,dermatoglyphics

Latent fingerprints (LFPs) are one among the most important types of evidences at crime scenes because of the distinctiveness and tenacity of the friction ridges in fingerprints (FPs). Therefore, it is essential in forensic science to develop a reliable method to detect LFPs. Traditional detection methods still face a number of difficulties, such as limited sensitivity, low contrast, strong background, and complex processing stages. In this study, MgO-ZrO₂:Tb³⁺ (1–5 mol%) (MZ:Tb) nanocomposites (NCs) were prepared via a simple solution combustion (SC) method at low temperature. The photoluminescence (PL) investigation demonstrates that when excited at 379 nm, the produced NCs emits distinctive emission peaks of terbium ions (Tb³⁺). According to the photometric results, the NCs can be employed as warm light NCs and emit light in the green portion of the colour spectrum. The estimated optical band gap from diffuse reflectance spectra is found to be in the range 4.84–4.97 eV. Regardless of the type of surface being used, the optimized MgO-ZrO₂:Tb³⁺ (4 mol%) (MZ:4Tb) NCs has a strong ability to minimize background fluorescence interference. With high contrast LFP and I–V type of cheiloscopy, these NCs present a flexible fluorescent mark for the identification of levels 1–3 details in forensic investigation.     

Intensity enhancement of photoluminescence in Tb3+/Eu3+ co-doped Ca14Zn6Al10O35 phosphor for WLEDs

This article focuses on the effect of monovalent cation doping on the optical properties of rare earth (RE = Eu³⁺, Tb³⁺) co-doped Ca₁₄Zn₆Al₁₀O₃₅ which has been synthesized by a low temperature combustion method. Crystalline phase of the Ca₁₄Zn₆Al₁₀O₃₅ phosphor was examined and confirmed by X-ray diffraction measurement. Under near-ultraviolet light excitation Eu³⁺-doped Ca₁₄Zn₆Al₁₀O₃₅ phosphor exhibit characterization of Eu³⁺ emission bands that are located at a maximum wavelength (λ_max) of approximately 470 nm and other peaks centred at 593 nm and 615 nm, respectively. With Tb³⁺-doped Ca₁₄Zn₆Al₁₀O₃₅ phosphor showing a green emission band centred at 544 nm under near-ultraviolet range. Furthermore, we studied the energy transfer process in Eu³⁺/Tb³⁺pair and enhancement in photoluminescence (PL) intensity with doping different charge compensation. Here we obtained the optimum PL emission intensity of the phosphor in broad and intense visible spectral range which may be significant for the fabrication of white light emitting diodes (WLEDs).