A chemiluminescence sensor array based on nanomaterials for discrimination of teas

In recent years, electronic tongue and nose devices have been developed that consist of an array of cross‐responsive sensors. In this study, we report a chemiluminescence (CL) sensor array based on oxidation at twelve different catalytic nanomaterial locations for the discrimination of eight teas. CL response patterns or “fingerprints” were obtained for a given compound on the sensor array and then discriminated through linear discriminant analysis. The experiments demonstrate that the sensor array had excellent differentiability and reversibility. Copyright © 2012 John Wiley & Sons, Ltd.     

A colorimetric sensor array based on natural pigments for the discrimination of saccharides

A colorimetric sensor array based on natural pigments was developed to discriminate between various saccharides. Anthocyanins, pH‐sensitive natural pigments, were extracted from fruits and flowers and used as components of the sensor array. Variation in pH, due to the reaction between saccharides and boronic acids, caused obvious colour changes in the natural pigments. Only by observing the difference map with the naked eye could 11 common saccharides be divided into independent individuals. In conjunction with pattern recognition, the sensor array clearly differentiated between sugar and sugar alcohol with highly accuracy and allowed rapid quantification of different concentrations of maltitol and fructose. This sensor array for saccharides is expected to become a promising alternative tool for food monitoring. The link between anthocyanin and saccharide detection opened a new guiding direction for the application of anthocyanins in foods.     

A novel gaseous dimethylamine sensor utilizing cataluminescence on zirconia nanoparticles

A novel cataluminescence (CTL) sensor using ZrO₂ nanoparticles as the sensing material was developed for the determination of trace dimethylamine in air samples based on the catalytic chemiluminescence (CL) of dimethylamine on the surface of ZrO₂ nanoparticles. The CTL characteristics and the different factors on the signal intensity for the sensor, including nanomaterials, working temperature, wavelength and airflow rate, were investigated in detail. The CL intensity on ZrO₂ nanoparticles was the strongest among the seven examined catalysts. This novel CL sensor showed high sensitivity and selectivity to gaseous dimethylamine at optimal temperature of 330°C. Quantitative analysis was performed at a wavelength of 620 nm. The linear range of CTL intensity vs concentration of gaseous dimethylamine was 4.71 × 10^?3 to 7.07 × 10^?2 mg L^?1 (r = 0.9928) with a detection limit (3σ) of 6.47 × 10^?4 mg L^?1. No or only very low levels of interference were observed while the foreign substances such as benzene, hydrochloric acid, methylbenzene, chloroform, n‐hexane and water vapor were passing through the sensor. The response time of the sensor was less than 50 s, and the sensor had a long lifetime of more than 60 h. The sensor was successfully applied to the determination of dimethylamine in artificial air samples, and could potentially be applied to analysis of nerve agents such as Tabun (GA). Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence sensor for sulfonylurea herbicide using molecular imprinted microspheres as recognition element

Uniform molecular imprinting microspheres were prepared using precipitation polymerization with thifensulfuron‐methyl (TFM) as template, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. TFM could be selectively adsorbed on the molecularly imprinted polymers (MIPs) matrix through the hydrogen bonding interaction and the adsorbed TFM could be sensed by its strikingly enhancing effect on the weak chemiluminescence (CL) reaction between luminol and hydrogen peroxide. On this basis, a novel CL sensor for the determination of TFM using MIPs as recognition elements was established. The logarithm of net CL intensity (ΔI) is linearly proportional to the logarithm of TFM concentration (C) in the range from 1.0 × 10^?9 to 5.0 × 10^?5 mol L^?1 with a detection limit of 8.3 × 10^?10 mol L^?1 (3σ). The results demonstrated that the MIP–CL sensor was reversible and reusable and that it could strikingly improve the selectivity and sensitivity of CL analysis. Furthermore, it is suggested that the CL enhancement of luminol–H₂O₂ by TFM might be ascribed to the enhancement effect of CO₂, which came from TFM hydrolysis in basic medium. Copyright © 2010 John Wiley & Sons, Ltd.     

A composite sensor array impedentiometric electronic tongue Part II. Discrimination of basic tastes

An impedentiometric electronic tongue based on the combination of a composite sensor array and chemometric techniques aimed at the discrimination of soluble compounds able to elicit different gustative perceptions is presented. A composite array consisting of chemo-sensitive layers based on carbon nanotubes or carbon black dispersed in polymeric matrices and doped polythiophenes was used. The electrical impedance of the sensor array was measured at a frequency of 150 Hz by means of an impedance meter. The experimental set-up was designed in order to allow the automatic selection of a test solution and dipping of the sensor array following a dedicated measurement protocol. Measurements were carried out on 15 different solutions eliciting 5 different tastes (sodium chloride, citric acid, glucose, glutamic acid and sodium dehydrocholate for salty, sour, sweet, umami and bitter, respectively) at 3 concentration levels comprising the human perceptive range. In order to avoid over-fitting, more than 100 repetitions for each sample were carried in a 4-month period. Principal component analysis (PCA) was used to detect and remove outliers. Classification was performed by linear discriminant analysis (LDA). A fairly good degree of discrimination was obtained.     

Experimental and numerical estimations into the force distribution on an occlusal surface utilizing a flexible force sensor array

This study presents a novel flexible force sensor array for measuring the distribution of the force distribution over the first molar. The developed force sensor array is composed of a flexible polyimide electrode and barium-titanate-based multilayer ceramic capacitors (MLCCs). The piezoelectric and material properties of industrial-grade MLCCs are ideal for measuring large-force loadings. The sensors are cheap and easy to integrate with automated manufacturing processes. Prior to experimental measurements, the force responses for the MLCC sensor cells were systematically measured and evaluated, confirming their high fracture strength and good sensing properties. Finite element (FE) simulations were used to calculate the force distribution over the tooth crown from the measurement results of the 3×3 force sensor array. Results indicate that the sensor has great sensitivity and linearity under a high-speed cycle loading of 500 N/s conducted to simulate normal chewing. The total force measured using the developed sensor array within the artificial tooth had an error of less than 5%. In addition, the force distributions over the molar crown obtained using a numerical method of FE analysis agree well with those obtained from experiments. The developed flexible force sensor array thus has potential for in-situ bite force measurements that are low-cost and reliable.     

Sensitive chemical sensor array based on nanozymes for discrimination of metal ions and teas

Tea, originating from China, is an important part of Chinese traditional culture. There are different qualities of and producing areas for tea on the market, therefore it is necessary to discriminate between teas in a fast and accurate way. In this study, a chemical sensor array based on nanozymes was developed to discriminate between different metal ions and teas. The indicators for the sensor array are three kinds of nanozymes mimicking laccase (Cu‐ATP, Cu‐ADP, Cu‐AMP). The as‐developed sensor array successfully discriminated 12 metal ions and the detection limit was as low as 0.01 μM. The as‐developed sensor array was also able to discriminate tea samples. Different kinds of tea samples appeared in different areas in the canonical score plot with different response patterns. Furthermore, in a blind experiment, we successfully discriminated 12 samples with a 100% accuracy. This sensor array integrates chemistry and food science together, realizing the simultaneous detection of several kinds of teas using a sensitive method. The as‐developed sensor array would have an application in the tea market and provide a fast and easy method to discriminate between teas.     

Development of a benzaldehyde sensor utilizing chemiluminescence on nanosized Y2O3

A chemiluminescence sensor has been proposed for sensitive determination of benzaldehyde, with nanosized Y₂O₃ as the sensing material. Under optimized conditions, the linear range of the CL intensity vs. the concentration of benzaldehyde vapour is 1.8 ng/mL–10.8 µg/mL (r² = 0.9996), with a detection limit of 0.90 ng/mL (signal:noise ratio = 3:1). The sensor also exhibits high selectivity to benzaldehyde because no or weak CL signals have been detected when foreign substances are introduced into the sensor. In addition, the sensor also shows good stability and longer lifetime within 100 h. The results indicate that the proposed sensor, which has high sensitivity and selectivity, shows great potential for the detection of benzaldehyde. Copyright © 2008 John Wiley & Sons, Ltd.     

Ultrasensitive chemiluminescence assay for cimetidine detection based on the synergistic improving effect of Au nanoclusters and graphene quantum dots

A novel and sensitive chemiluminescence (CL) procedure based on the synergetic catalytic effects of gold nanoclusters (Au NCs) and graphene quantum dots (GQDs) was developed for the reliable measurement of cimetidine (CM). The initial experiments showed that the KMnO₄‐based oxidation of alkaline rhodamine B (RhoB) generated a very weak CL emission, which was intensively enhanced in the simultaneous presence of Au NCs and GQDs. CL intermediates can be adsorbed and gathered on the surface of Au NCs, becoming more stable. GQDs participate in the energy transferring processes and facilitate them. These improving effects were simultaneously obtained by adding both Au NCs and GQDs into the RhoB‐KMnO₄ reaction. Consequently, the increasing effect of the Au NCs/GQDs mixture was more than that of pure Au NCs or GQDs, and a new nano‐assisted powerful CL system was achieved. Furthermore, a marked quenching in the emission of the introduced CL system was observed in the presence of CM, so the system was examined to design a sensitive sensor for CM. After optimization of influencing parameters, the linear lessening in CL emission intensity of KMnO₄‐RhoB‐Au NCs/GQDs was verified for CM concentrations in the range 0.8–200 ng ml^?1. The limit of detection (3S_b/m) was 0.3 ng ml^?1. Despite being a simple CL method, good sensitivity was obtained for CM detection with reliable results for CM determination in human urine samples.     

A molecularly imprinted polymer based chemiluminescence array sensor for one‐step determination of phenothiazines and benzodiazepines in pig urine

The residues of phenothiazines and benzodiazepines in foods of animal origin are dangerous to consumers. For inspection of their abuses, this study for the first time reported on the use of a chemiluminescence array sensor for the simultaneous determination of four phenothiazines and five benzodiazepines in pig urine. Two molecularly imprinted polymers were coated in different wells of a conventional 96‐well microtiter plate as the recognition reagents. After sample loading, the absorbed analytes were initiated directly by using an imidazole enhanced bis(2,4,6‐trichlorophenyl)oxalate–hydrogen peroxide system to emit light. The assay process consisted of only one sample‐loading step prior to data acquisition, so one test was finished within 10 min. The limits of detection for the nine drugs in the pig urine were in a range of 0.1 to 0.6 pg/mL, and the recoveries from the fortified blank urine samples were in a range of 80.3 to 95%. Furthermore, the sensor could be reused six times. Therefore, this sensor could be used as a simple, rapid, sensitive and reusable tool for routine screening for residues of phenothiazines and benzodiazepines in pig urine.     

Myeloperoxidase-Based Chemiluminescence of Polymorphonuclear Leukocytes and Monocytes

Luminol and lucigenin chemiluminescence (CL) responses produced by separated human blood polymorphonuclear leukocytes (pmn) and monocytes (mono) have been studied following stimulation with the surface-receptor agonist fMLP (a synthetic chemotactic peptide) and the protein kinase C activator phorbol myristate acetate (PMA). Pmn produced two- to threefold the luminol CL and superoxide anion (O₂⁻) levels of mono; lucigenin CL was similar for both cell-types. The myeloperoxidase (MPO) inhibitor salicylhydroxamic acid (SHA) abrogated luminol but not lucigenin CL in both cell types, but did not further inhibit the already grossly subnormal luminol CL responses seen with MPO-deficient cells which produced normal lucigenin CL. SHA also profoundly inhibited the luminol CL response in a cell-free MPO–H₂O₂ system. Mono lucigenin CL does not appear to specifically measure O₂⁻ production. These data show that luminol CL provides a useful measure of pmn and also mono MPO activity. However, analysis of the effects of various reactive oxygen species (ROS) scavengers, assessed on phagocyte and cell-free CL systems (both MPO–H₂O₂ and superoxide generating) suggest that the luminol CL signal is not entirely dependent on MPO activity.     

A microbead array chemical sensor using capillary-based sample introduction: toward the development of an "electronic tongue"

The development of a micromachined fluidic structure for the introduction of liquid samples into a chip-based sensor array composed of individually addressable polymeric microbeads is presented. The micromachined structure consists of micromachined storage cavities combined with a covering glass layer that confines the microbeads and fluidic channels. In our sensor array transduction occurs via optical (colorimetric and fluorescence) changes to receptors and indicator molecules that are covalently attached to termination sites on the polymeric microbeads. Spectral data are acquired for each of the individual microbeads using a charged-coupled device (CCD) allowing for the near-real-time analysis of liquid sample. Hence the micromachined fluidic structure must allow for both optical access to the microbeads and fluid flow through the micromachined cavities that serve as the microreactors/analysis chambers. One of the key parts of the structure is a passive fluid introduction system driven only by capillary force. This simple means of fluid introduction realizes a compact device. The capillary flow on the inlet channel has been studied, and the responses of the microbeads (alizarin complexone) to a liquid sample have been characterized. The test results show that this system is useful in a micro-total-analysis-system (mu-TAS) and biomedical applications.     

In vitro monitoring sub-nanogram amounts analgin in human urine by its inhibitory of the luminol-periodate chemiluminescence reaction using reagent immobilization release technique

A selective and sensitive as well as rapid chemiluminescence (CL) flow sensor for the determination of analgin is described. The analytical reagents involved in chemiluminescence reaction, luminol and periodate, were both immobilized on an anion-exchange column. The CL signals produced by the reaction between luminol and periodate, which were eluted from the column through water injection, were decreased in the presence of analgin. Analgin was sensed by measuring the decrement of CL intensity, and which was observed linear over the logarithm of analgin concentration range of 0.1 to 50.0 ng mL(-1), and the limit of detection was 0.04 ng mL(-1) (3ó). At a flow rate of 2.0 mL min(-1), including sampling and washing, the detection could be performed in 0.5 min with a relative standard deviation of less than 3.0%. The proposed procedure was applied successfully in the monitoring of analgin in human urine samples without any pre-treatment process. It was found that the analgin concentration reached its maximum after being orally administrated for 4 h, and the analgin metabolism ratio in 10 h was 9.28% in the body of volunteers. The flow sensor offered reagentless procedures and remarkable stability in determination of analgin, and could be easily reused over 80 h.     

Intraovarian effect of dominant follicle and corpus luteum on number of follicles during a follicular wave in heifers

The intraovarian relationships among dominant follicle (DF), corpus luteum (CL), and number of follicles between Days 0 to 5 (Day 0 = ovulation) in wave 1 (n = 65 waves) and Days 9 to 13 in wave 2 (n = 62) were analyzed in separate experiments in Bos taurus heifers. Ovaries were grouped into intraovarian patterns of DF–CL, DF alone, CL alone, and neither DF nor CL. In wave 1, the pattern frequencies of DF–CL or neither DF nor CL (34% each) were greater (P < 0.0004) than for DF alone or CL alone (16% each). The number of growing follicles ≥5.0 mm, was greater (P < 0.0001) in ovaries with the DF, even when the DF was removed from the tally (P < 0.03). In a factorial analysis of wave 1, there was a positive main effect of DF (3.9 ± 0.2 vs. 2.2 ± 0.2 follicles; P < 0.0001), but the main effect of CL and the interaction of DF and CL were not significant. In a factorial analysis of wave 2, there were more (P < 0.0001) follicles greater than 6 mm in ovaries with a DF when the DF was included and an approaching difference (P < 0.09) when the DF was excluded. The main effect of CL and the interaction of DF and CL were not significant. The hypothesis that both the DF and CL have a positive intraovarian effect on number of follicles in waves 1 and 2 was only partly supported; the DF, but not the CL, had an effect in the factorial analyses. Previous reports in cattle and sheep of a positive intraovarian effect of CL on number of follicles are questionable in that location of the DF was not considered.     

Analysis of gene expression in non-regressed and regressed bovine corpus luteum tissue using a customized ovarian cDNA array

The lifespan of the bovine corpus luteum (CL) is an important factor in the control of normal ovarian cyclicity and the establishment and maintenance of pregnancy. There is increasing evidence that CL lifespan is regulated by alternative expression of genes that promote or inhibit luteolysis. To gain further insights into these events a 434 character ovarian cDNA array comprising genes attributed to key aspects of CL function including more than 100 anonymous expressed sequence tags (ESTs) was constructed and screened with alpha(33)P dATP labeled RNA isolated from non-regressed (n=6) and regressed (n=6) CL tissue. Significance analysis of microarrays (SAM) identified 15 genes that changed expression 1.7-fold or more with a false discovery rate of <5%. The differentially expressed genes encoded enzymes involved in steroid biosynthesis and oxygen radical metabolism and proteins involved in extracellular matrix remodeling, apoptosis and cell structure. Results for five of the differentially expressed genes including matrix gla protein and collagen alpha1(I) (extracellular matrix), glutathione-S-transferase alpha I (oxygen metabolism), clusterin (apoptosis) and scavenger receptor BI (steroid biosynthesis) were confirmed by Northern blot analysis and found to be significantly different (P<0.01) between non-regressed and regressed CL tissue. Collectively this study identified genes with recognized roles in CL regression, genes with potential roles in this process and genes whose function have yet to be defined in this event.     

Predicting sporulation events in a bioreactor using an electronic nose

An electronic nose (EN) based on a non- specific multi-sensor array was used to accurately estimate sporulation events and the spore concentration of Bacillus subtilis cultures. The array included 6 metal oxide sensors (MOS), 10 metal oxide semiconductor field effect transistors (MOSFET), one CO(2) infrared sensor and one humidity sensor. The EN was used to monitor the gas emissions from B. subtilis bioreactions during both batch and fed-batch operation. The signal pattern produced by the sensors was evaluated by principal component analysis (PCA) and training cultivations were used to build a model. The arc length of the PCA trajectories was successfully correlated to the off-line spore count; a strong linear correlation (R(2) = 0.992) between the numerical integration of the curves and the measured spore concentration was established. The fast responses of the sensors in combination with the robust correlation with the off-line determination of spore concentration establish this EN device as a convenient tool for monitoring sporulation events in bioprocesses.     

Enzymatically and combinatorially generated array-based polyphenol metal ion sensor

Phenolic polymers were synthesized via soybean hull peroxidase catalysis and used as metal-based sensor components in a polymer array. A sensor array for Fe(3+), Cu(2+), Co(2+), and Ni(2+) has been developed consisting of 15 phenolic homopolymers and copolymers generated from five phenolic monomers by peroxidase-catalyzed oxidative polymerization. Sensing was based on the change of intrinsic polyphenol fluorescence upon addition of a metal ion or a metal ion mixture to an aqueous suspension of a polyphenol. Importantly, the fluorescence response of copolymers differed, in some cases dramatically, from the constituent homopolymers and was dependent upon the relative ratio of monomers that comprise the polymer. This finding suggests that an extremely broad range of sensor arrays can be generated from a limited number of phenolic monomers. Using a statistical analysis, histograms constructed for the four different metal ions yielded unique fingerprints of the array response and can be used to identify specific metal ions.     

Antiphospholipid reactivity against cardiolipin metabolites occurring during endothelial cell apoptosis

We have recently shown that cardiolipin (CL) and its metabolites move from mitochondria to other cellular membranes during death receptor-mediated apoptosis. In this study, we investigate the immunoreactivity to CL derivatives occurring during endothelial apoptosis in patients with antiphospholipid syndrome (APS) and systemic lupus erythematosus (SLE). We compared the serum immunoreactivity to CL with that of its derivatives monolysocardiolipin (MCL), dilysocardiolipin (DCL), and hydrocardiolipin (HCL) by means of both enzyme-linked immunosorbent assay and thin-layer chromatography (TLC) immunostaining. In addition, we investigated the composition of phospholipid extracts from the plasma membrane of apoptotic endothelial cells and the binding of patients' sera to the surface of the same cells by using high-performance TLC and immunofluorescence analysis. The average reactivity to MCL was comparable with that of CL and significantly higher than that for DCL and HCL in patients studied, both in the presence or in the absence of beta2-glycoprotein I. Of relevance for the pathogenic role of these autoantibodies, immunoglobulin G from patients' sera showed an increased focal reactivity with the plasma membrane of endothelial cells undergoing apoptosis. Interestingly, the phospholipid analysis of these light membrane fractions showed an accumulation of both CL and MCL. Our results demonstrated that a critical number of acyl chains in CL derivatives is important for the binding of antiphospholipid antibodies and that MCL is an antigenic target with immunoreactivity comparable with CL in APS and SLE. Our finding also suggests a link between apoptotic perturbation of CL metabolism and the production of these antibodies.     

Development of a MEMS-based sensor array to characterise in situ loads during scoliosis correction surgery

Finite element analysis was implemented in three stages to design a piezoresistive, micro-electro-mechanical systems sensor array consisting of four-terminal sensors placed on deformable silicon diaphragms. This sensor array was used to retrofit the Contrel-Dubousset instrumentation in order to capture forces and moments applied by surgeons in real time during scoliosis correction surgery. Outputs from the sensor array have been designed to be compatible with a low-power wireless data transmission system that is currently being developed with a collaborating team in the biomedical industry. The designed sensor array is capable of resolving forces of up to 1000 N and moments of up to 4000 N mm in three dimensions during surgery. A process flow to produce the first prototyped version of this micro sensor with known performance characteristics is presented and tested. Acceptable correlation was found between the performance of the manufactured prototypes, numerical simulation and similar documented devices.