Interaction of glucose‐derived carbon quantum dots with silver and gold nanoparticles and its application for the fluorescence detection of 6‐thioguanine

The interaction of glucose‐derived carbon quantum dots (CQDs) with silver (Ag) and gold (Au) nanoparticles (NPs) was explored by fluorescence spectroscopy. Both metal NPs cause an efficient quenching of CQD fluorescence, which is likely due to the energy transfer process between CQDs as donors and metal NPs as acceptors. The Stern–Volmer plots were evaluated and corresponding quenching constants were found to be 1.9 × 10¹⁰ and 2.2 × 10⁸ M^?1 for AgNPs and AuNPs, respectively. The analytical applicability of these systems was demonstrated for turn‐on fluorescence detection of the anti‐cancer drug, 6‐thioguanine. Because the CQD–AgNP system had much higher sensitivity than the CQD–AuNP system, we used it as a selective fluorescence probe in a turn‐on assay of 6‐thioguanine. Under optimum conditions, the calibration graph was linear from 0.03 to 1.0 μM with a detection limit of 0.01 μM. The developed method was applied to the analysis of human plasma samples with satisfactory results.     

Application of a lanthanide composite nanoparticle‐sensitized luminescence method for the determination of salicylic acid in pharmaceutical formulations and human plasma

Terbium‐acetylacetone (Tb–acac) composite nanoparticles were synthesized using the ultrasonic method. The nanoparticles are water‐soluble, stable and have extremely narrow emission bands and high internal quantum efficiencies. They were used as fluorimetric probes in the determination of salicylic acid (SA), based on the fluorescence enhancement of nanoparticles through fluorescence resonance energy transfer (FRET). The influence of buffer solution was investigated. Under the optimum conditions, a linear calibration graph was obtained over the SA concentration range 5 × 10^–7–1 × 10^–4 mol/L. The limit of detection was found to be 2.5 × 10^–8 mol/L. The relative standard deviation (RSD) for six repeated measurements of 1 × 10^–4 mol/LSA was 1.75%. The method was applied to the determination of SA in pharmaceutical formulations and human plasma. We believe that the proposed approach has great potential for clinical purposes. Copyright © 2008 John Wiley & Sons, Ltd.     

4‐Hydroxy‐benzoic acid (4‐diethylamino‐2‐hydroxy‐benzylidene)hydrazide: DFT,antioxidant, spectroscopic and molecular docking studies with BSA

The Schiff base 4‐hydroxy‐benzoic acid (4‐diethylamino‐2‐hydroxy‐benzylidene) hydrazide (SL) was synthesized and characterized. Its antioxidant activity was evaluated using 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) free radical scavenging action. Being a potent antioxidant its binding ability to the transport protein bovine serum albumin (BSA) was studied using fluorescence quenching and circular dichroism (CD) studies. The binding distance has been calculated by fluorescence resonance energy transfer (FRET) to be 1.85 Å and the Stern–Volmer quenching constant has been calculated to be (3.23 ± 0.45) × 10⁵ M^–1. Quantum chemical analysis was carried out for the Schiff base using DFT with B3LYP and 6–311G** and related to the experimentally obtained results. For a deeper understanding of the mechanism of the interaction, the experimental data were complemented by protein–Schiff base docking calculations using Argus Lab. Copyright © 2015 John Wiley & Sons, Ltd.     

Bovine serum albumin‐confined silver nanoclusters as fluorometric probe for detection of biothiols

Fluorescent bovine serum albumin‐confined silver nanoclusters (BSA–AgNCs) were demonstrated to be a novel and environmentally friendly probe for the rapid detection of biothiols such as cysteine (Cys), homocysteine (Hcy) and glutathione (GSH). The sensing was ascribed to the strong affinity between the mercapto group of the biothiols and the silver nanoclusters. The fluorescence intensity of BSA–AgNCs was quenched efficiently on increasing the concentration of biothiol, corresponding with a red‐shift in emission wavelength. However, the fluorescence of the silver nanoclusters was almost unchanged in the presence of other α‐amino acids at 10‐fold higher concentrations. By virtue of this specific response, a new, simple and rapid fluorescent method for detecting biothiols has been developed. The linear ranges for Cys, Hcy and GSH were 2.0 × 10^‐6 to 9.0 × 10^‐5 M (R² = 0.994), 2.0 × 10^‐6 to 1.2 × 10^‐4 M (R² = 0.996) and 1.0 × 10^‐5 to 8.0 × 10^‐5 M (R² = 0.980), respectively. The detection limits were 8.1 × 10^‐7 M for Cys, 1.0 × 10^‐6 M for Hcy and 1.1 × 10^‐6 M for GSH. Our proposed method was successfully applied to the determination of thiols in human plasma and the recovery was 94.83–105.24%. It is potentially applicable to protein‐stabilized silver nanoclusters in a chemical or biochemical sensing system. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of fluoxetine in pharmaceutical and biological samples based on the silver nanoparticle enhanced fluorescence of fluoxetine–terbium complex

In this study, a simple and sensitive spectrofluorimetric method is presented for the determination of fluoxetine based on the enhancing effect of silver nanoparticles (AgNPs) on the terbium–fluoxetine fluorescence emission. The AgNPs were prepared by a simple reduction method and characterized by UV–Vis spectroscopy and transmission electron microscopy. It was indicated that these AgNPs have a remarkable amplifying effect on the terbium‐sensitized fluorescence of fluoxetine. The effects of various parameters such as AgNP and Tb³⁺ concentration and the pH of the media were investigated. Under obtained optimal conditions, the fluorescence intensity of the terbium–fluoxetine–AgNP system was enhanced linearly by increasing the concentration of fluoxetine in the range of 0.008 to 19 mg/L. The limit of detection (b + 3s) was 8.3 × 10^‐4 mg/L. The interference effects of common species found in real samples were also studied. The method had good linearity, recovery, reproducibility and sensitivity, and was satisfactorily applied for the determination of fluoxetine in tablet formulations, human urine and plasma samples. Copyright © 2016 John Wiley & Sons, Ltd.     

Rapid determination of gatifloxacin in biological samples and pharmaceutical products using europium‐sensitized fluorescence spectrophotometry

A europium‐sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of gatifloxacin (GFLX). The GFLX–Eu³⁺–SDBS system was studied and it was found that SDBS significantly enhanced the fluorescence intensity of the GFLX–Eu³⁺ complex (about 25‐fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 338 and 617 nm, pH 7.5, 3.0 × 10^–6 mol/L europium(III), and 5.0 × 10^–5 mol/L SDBS. The enhanced fluorescence intensity of the system (ΔI_f) showed a good linear relationship with the concentration of GFLX over the range 1.0 × 10^–8–8.0 × 10^–7 mol/L with a correlation coefficient of 0.9990. The detection limit (S:N = 3) was determined as 1.0 × 10^–9 mol/L. This method has been successfully applied for the determination of GFLX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range and good stability. The luminescence mechanism of the system is also discussed in detail. Copyright © 2008 John Wiley & Sons, Ltd.     

Highly sensitive fluorescence detection of glycoprotein based on energy transfer between CuInS2 QDs and rhodamine B

A highly sensitive fluorescence method for glycoprotein detection has been established based on fluorescence resonance energy transfer (FRET) between CuInS₂ quantum dots (QDs) and rhodamine B (RB). Lectins comprise a group of proteins with unique affinities toward carbohydrate structures, so the process of FRET can occur between lectin‐coated QDs (CuInS₂ QDs–Con A conjugates, acceptors) and carbohydrate‐coated RB (RB–NH₂‐glu conjugates, donors). The fluorescence of lectin‐coated QDs was recovered in the presence of a glycoprotein such as glucose oxidase (GOx) and transferrin (TRF), which significantly reduced the FRET efficiency between the donor and the acceptor. Under optimal conditions, a linear correlation was established between the fluorescence intensity ratio I₆₅₄/I₅₇₇ and the TRF concentration over the range of 6.90 × 10^‐10 to 3.45 × 10^‐8 mol/L, with a detection limit of 2.5 × 10^‐10 mol/L. The linear range for GOx is 3.35 × 10^‐10 to 6.70 × 10^‐8 mol/L, with a detection limit of 1.5 × 10^‐10 mol/L. The proposed method was applied to the determination of glycoprotein in human serum and cell‐extract samples with satisfactory results. Furthermore, CuInS₂ QDs–Con A conjugates are used as safe and efficient optical nanoprobes in HepG2 cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

Eco‐friendly synthesis of gelatin‐capped bimetallic Au–Ag nanoparticles for chemiluminescence detection of anticancer raloxifene hydrochloride

This study described the utility of green analytical chemistry in the synthesis of gelatin‐capped silver, gold and bimetallic gold–silver nanoparticles (NPs). The preparation of nanoparticles was based on the reaction of silver nitrate or chlorauric acid with a 1.0 wt% aqueous gelatin solution at 50°C. The gelatin‐capped silver, gold and bimetallic NPs were characterized using transmission electron microscopy, UV–vis, X‐ray diffraction and Fourier transform infrared spectroscopy, and were used to enhance a sensitive sequential injection chemiluminescence luminol–potassium ferricyanide system for determination of the anticancer drug raloxifene hydrochloride. The developed method is eco‐friendly and sensitive for chemiluminescence detection of the selected drug in its bulk powder, pharmaceutical injections and biosamples. After optimizing the conditions, a linear relationship in the range of 1.0 × 10^–9 to 1.0 × 10^–1 mol/L was obtained with a limit of detection of 5.0 × 10^–10 mol/L and a limit of quantification of 1.0 × 10^‐9 mol/L. Statistical treatment and method validation were performed based on ICH guidelines. Copyright © 2016 John Wiley & Sons, Ltd.     

Simultaneous determination of piroxicam and norfloxacin in biological fluids by high‐performance liquid chromatography with fluorescence detection at zero‐order emission mode

A new highly sensitive high‐performance liquid chromatographic method with fluorescence detection (HPLC–FLD) in zero‐order emission mode was developed for the first time for the simultaneous determination of piroxicam (PRX) and norfloxacin (NRF) in biological fluids. The fluorescence detector wavelengths were set at 278 nm for excitation and zero‐order mode for emission. The zero‐order emission mode produced greater sensitivity for the measurement of both drugs than a fixed emission wavelength (446 nm). The new developed method was validated according to International Conference of Harmonization (ICH) guidelines. Linearity was found to be over concentration ranges 0.001–20 μg/ml and 0.00003–0.035 μg/ml for PRX and NRF, respectively. The limits of detection were 4.87 × 10^?4 and 1.32 × 10^?5 μg/ml for PRX and NRF, and the limits of quantitation were 1.47 × 10^?3 and 4.01 × 10^?5 μg/ml, respectively. The current fluorescence method was found to be more sensitive than most commonly used analytical methods and was successfully applied for simultaneous determination of PRX and NRF in biological fluids (serum and urine) with recoveries ranging from 91.67% to 100.36% for PRX and from 96.00% to 101.43% for NRF.     

Highly sensitive spectrofluorimetic determination of rutin based on its activated effect on a multi‐enzyme redox system

A highly sensitive and simple spectrofluorimetric method for the determination of rutin, based on its activated effect on a haemoglobin‐catalysed reaction, was developed. Under optimum conditions, the concentration of rutin was linear, with decreased fluorescence (ΔF) of the system under optimal experimental conditions. The calibration graph was linear in the range 1.0 × 10^–7–3.0 × 10^–5 mol/L, with a detection limit of 7.0 × 10^–8 mol/L. The relative standard deviation (RSD) was 3.26% for 11 determinations of 1.0 × 10^–5 mol/L. This method was used for the determination of rutin in pharmaceuticals with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Micelle‐enhanced spectrofluorimetric method for quantification of entacapone in tablets and human plasma

In this paper, a simple and highly sensitive spectrofluorimetric method was developed and validated for the determination of entacapone (ETC). The proposed method is based on forming a highly fluorescent product through the reduction of ETC with Zn/HCl. The produced fluorophore exhibits strong fluorescence at λ_em 345 nm after excitation at λ_ex 240 nm. The use of fluorescence enhancers such as Tween‐80 and carboxy methyl cellulose (CMC) greatly enhanced the fluorescence of the produced fluorophore by 150% and 200%, respectively. Calibration curves showed good linear regression (r2 > 0.9998) within test ranges of 0.05–2.0 and 0.02–1.80 μg mL^?1 with lower detection limits of 1.27 × 10^?2 and 4.8 × 10^?3 μg mL^?1 and lower quantification limits of 4.21 × 10^?2 and 1.61 × 10^?2 μg mL^?1 upon using Tween‐80 and or CMC, respectively. The method was successfully applied to the analysis of ETC in its pharmaceutical formulations (either alone or in presence of other co‐formulated drugs). The results were in good agreement with those obtained using the official method. The methods were further extended to determine the drug in human plasma samples, and to study the pharmacokinetics of ETC. The paper is the first report on the spectrofluorimetric determination of entacapone.     

Post‐chemiluminescence determination of chloramphenicol based on luminol–potassium periodate system

A post‐chemiluminescence (PCL) phenomenon was observed when chloramphenicol was injected into a mixture of luminol and potassium periodate after the chemiluminescence (CL) reaction of luminol–potassium periodate had finished. The possible reaction mechanism was proposed based on studies of the CL kinetic characteristics, the CL spectra, the fluorescence spectra and the UV‐vis absorption spectra of the related substances. Based on the PCL reaction, a rapid and sensitive method for the determination of chloramphenicol was established. The linear response range was 6.0 × 10^?7–1.0 × 10^?5 mol/L, with a correlation coefficient of 0.9986. The relative standard deviation (RSD) for 5.0 × 10^?6 mol/L chloramphenicol was 2.3% (n = 11). The detection limit was 1.6 × 10^?7 mol/L. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Two‐channel near‐infrared fluorescence Ag+ ion sensing of a new star‐shaped dendrimer

A new near‐infrared fluorescence sensor PDI‐PD for Ag⁺ ions was successfully prepared and its structure characterized by ¹H nuclear magnetic resonance (NMR), ¹³C NMR and high‐resolution mass spectrometry; matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (HRMS MALDI‐TOF). The probe exhibited rapid, sensitive, and selective two‐channel fluorescence responses towards Ag⁺ ions and protons. The probe has a marked high binding affinity and high sensitivity for Ag⁺, with a detection limit of 1.4 × 10^?6 M. An approximately five‐fold enhanced core emission at 784 nm was attributed to fluorescence resonance energy transfer (FRET). The enhanced core emission of the probe with Ag⁺ ions based on photo‐induced electron transfer and FRET is discussed. In addition, the probe presented a visible colour change. All experimental results demonstrated that PDI‐PD is an efficient tool for the selective, sensitive and rapid detection of Ag⁺ ions and protons using two‐channel fluorescence responses.     

Flow injection chemiluminescence determination of 6‐mercaptopurine based on a new system of potassium permanganate–thioacetamide–sodium hexametaphosphate

A novel chemiluminescence method for the determination of 6‐mercaptopurine was established based on 6‐mercaptopurine inhibition of the chemiluminescence emission of potassium permanganate–thioacetamide–sodium hexametaphosphate system. The peak height was proportional to log 6‐mercaptopurine concentration in the range 7.0 × 10^?10 to 1.0 × 10^?7 g/mL and the detection limit was 1.9 × 10^?11 g/mL (S/N = 3). The relative standard deviation was 1.5% for the determination of 8.0 × 10^?8 g/mL 6‐mercaptopurine (n = 11). The proposed sensor was successfully applied to the analysis of 6‐mercaptopurine in human serum samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Stopped‐flow chemiluminescence determination of the anticancer drug capecitabine: Application in pharmaceutical analysis and drug‐delivery systems

Capecitabine is a chemotherapeutic agent used for the treatment of patients with metastatic cancers. This study aimed at determining the drug capecitabine in a simple chemiluminescence (CL) system of acidic potassium permanganate using the stopped‐flow injection technique. Statistical methods were used to detect optimum conditions. The method showed two linear calibration ranges from 6.7 × 10^?6 to 6.7 × 10^?5 mol L^?1 and from 6.7 × 10^?5 to 2.7 × 10^?3 mol L^?1 with a detection limit of 1.5 × 10^?6 mol L^?1. Chitosan‐modified magnetic nanoparticles were studied in the drug‐delivery experiments. According to the pH sensitivity of chitosan and low pH values in tumour cells, the chitosan‐coated magnetic nanoparticles could provide a good targeting drug‐delivery system to tumour sites. To evaluate the applicability of the method, the capecitabine‐loaded magnetic chitosan nanoparticles were synthesized with two different cross‐linkers; loading and releasing rates of the drug were investigated using the proposed CL method and an ultraviolet–visible light spectrophotometric method (absorption at 305 nm). The results showed a good correlation between the two methods, and it was found that the synthesized chitosan‐modified magnetic nanoparticles could be used for pH‐dependent release of capecitabine in cancer cells. Moreover, determination of capecitabine in tablets and synthetic samples was performed.     

Synthesis of a novel fluorescent probe based on 7‐nitrobenzo‐2‐oxa‐1,3‐diazole skeleton for the rapid determination of vitamin B12 in pharmaceuticals

A new fluorescent probe, 4‐N,N‐di(2‐hydroxyethyl)imino‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (HINBD) was synthesized in a single step with reasonably good yield. The water‐soluble HINBD emits strongly in the visible region (λ_ex = 479 nm, λ_em = 545 nm) and is stable over a wide range of pH values. It was found that vitamin B₁₂ (VB₁₂) had the ability to quench the fluorescence of HINBD, and the quenched fluorescence intensity was proportional to the concentration of VB₁₂. A method for VB₁₂ determination based on the quenching fluorescence of HINBD was thus established. Interference effects of various substances, including sugars, vitamins, amino acids, inorganic cations and some organic substances have been studied. Under optimal conditions, the linear range is 0.0–2.4 × 10^–5 mol/L. The determination limit is 8.3 × 10^–8 mol/L. The method was applied to measure VB₁₂ in pharmaceutical preparations with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

d‐penicillamine capped cadmium telluride quantum dots as a novel fluorometric sensor of copper(II)

d ‐penicillamine‐capped cadmium telluride quantum dots (DPA‐capped CdTe QDs) were synthesized as the new fluorescent semiconductor nanocrystal in aqueous solution. Fourier transmission infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, ultraviolet‐visible and photoluminescence spectroscopy were used for characterization of the QDs. Based on the quenching effect of Cu²⁺ ions on the fluorescence intensity of DPA‐capped CdTe QDs, a new fluorometric sensor for copper(II) detection was developed that showed good linearity over the concentration range 5 × 10^–9–3 × 10^–6 m with the detection limit 0.4 × 10^–9 m . Owing to the strong affinity of the DPA to copper(II), the sensor showed appropriate selectivity for copper(II) compared with conventional QDs. The DPA‐capped CdTe QDs was successfully applied for determination of Cu²⁺ concentration in river, well and tap waters with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

A new quaternary photoluminescence enhancement system of Eu−N‐(o‐vanillin)‐1,8‐diaminonaphthalene−1,10‐phenanthroline−Zn and its application in determining trace amounts of europium and zinc

A new sensitive quaternary photoluminescence enhancement system has been successfully developed to determine trace amounts of Eu³⁺ and Zn²⁺. The photoluminescence intensity of Eu ? N‐(o‐vanilin)‐1,8‐diaminonaphthalene systems was greatly increased by the addition of specific concentrations of 1, 10‐phenanthroline and Zn²⁺. The excitation and emission wavelengths were 274 and 617 nm, respectively. Under optimal system conditions, the photoluminescence intensity showed a linear response toward Eu³⁺ in the range of 5.0 × 10^–6 ~ 2.0 × 10^–5 M with a limit of detection (= 2.2 × 10^–9 M) and the photoluminescence intensity of the system decreased linearly by increasing the Zn²⁺ concentration in the range of 5.0 × 10^–8 ~ 1.0 × 10^–6 M with a limit of detection (= 8.8 × 10^–11 M). This system was successfully applied for the determination of trace amounts of Eu³⁺ in a high purity La₂O₃ matrix and in the synthetic rare earth oxide mixture, and of Zn²⁺ in a high purity Mg(NO₃)₂ · 6H₂O matrix and in synthetic coexisting ionic matrixes. The energy transfer mechanism, photoluminescence enhancement of the system and interference of other lanthanide ions and common coexisting ions were also studied in detail. Copyright © 2013 John Wiley & Sons, Ltd.