Structural characterization and reversal of the natural organophosphate resistance of a D-type esterase, Saccharomyces cerevisiae S-formylglutathione hydrolase

Saccharomyces cerevisiae expresses a 67.8 kDa homodimeric serine thioesterase, S-formylglutathione hydrolase (SFGH), that is 39.9% identical with human esterase D. Both enzymes possess significant carboxylesterase and S-formylglutathione thioesterase activity but are unusually resistant to organophosphate (OP) inhibitors. We determined the X-ray crystal structure of yeast (y) SFGH to 2.3 A resolution by multiwavelength anomalous dispersion and used the structure to guide site-specific mutagenesis experiments addressing substrate and inhibitor reactivity. Our results demonstrate a steric mechanism of OP resistance mediated by a single indole ring (W197) located in an enzyme "acyl pocket". The W197I substitution enhances ySFGH reactivity with paraoxon by >1000-fold ( k i (W197I) = 16 +/- 2 mM (-1) h (-1)), thereby overcoming natural OP resistance. W197I increases the rate of OP inhibition under pseudo-first-order conditions but does not accelerate OP hydrolysis. The structure of the paraoxon-inhibited W197I variant was determined by molecular replacement (2.2 A); it revealed a stabilized sulfenic acid at Cys60. Wild-type (WT) ySFGH is inhibited by thiol reactive compounds and is sensitive to oxidation; thus, the cysteine sulfenic acid may play a role in the regulation of a "D-type" esterase. The structure of the W197I variant is the first reported cysteine sulfenic acid in a serine esterase. We constructed five Cys60/W197I variants and show that introducing a positive charge near the oxyanion hole, W197I/C60R or W197I/C60K, results in a further enhancement of the rates of phosphorylation with paraoxon ( k i = 42 or 80 mM (-1) h (-1), respectively) but does not affect the dephosphorylation of the enzyme. We also characterized three histidine substitutions near the oxyanion hole, G57H, L58H, and M162H, which significantly decrease esterase activity.     

Molecular cloning of carboxylesterase gene and biochemical characterization of encoded protein from Bacillus subtilis (RRL BB1)

An isolated strain of Bacillus subtilis identified by 16S rDNA sequence analysis produces an enantioselective ester hydrolase. Whole cells of B. subtilis (RRL BB1) and enzyme derived from it was capable of enantioselective hydrolysis of several racemates including drug intermediates with moderate to high enantioselectivity as already reported by us. In this communication, we describe cloning of the gene encoding the enantioselective esterase designated as estBB1. The primary structure of the enzyme determined from the nucleotide sequence indicated that esterase estBB1 has Mw approximately 52kDa and pI approximately 5.2 and belongs to the family of type B carboxylesterases with 50-60% similarity at amino acid level. Alignment studies of sequences of the estBB1 and Pnb esterase 56C8 from B. subtilis showed that estBB1 has an alpha/beta hydrolase fold with catalytic triad formed by Ser190, Glu305 and His394 at active site and Ser190 is located in the conserved motif -G-X-S-X-G-.     

Protective Role of Cys-178 against the Inactivation and Oligomerization of Human Insulin-degrading Enzyme by Oxidation and Nitrosylation

Insulin-degrading enzyme (IDE), a 110-kDa metalloendopeptidase, hydrolyzes several physiologically relevant peptides, including insulin and amyloid-β (Aβ). Human IDE has 13 cysteines and is inhibited by hydrogen peroxide and S-nitrosoglutathione (GSNO), donors of reactive oxygen and nitrogen species, respectively. Here, we report that the oxidative burst of BV-2 microglial cells leads to oxidation or nitrosylation of secreted IDE, leading to the reduced activity. Hydrogen peroxide and GSNO treatment of IDE reduces the V_max for Aβ degradation, increases IDE oligomerization, and decreases IDE thermostability. Additionally, this inhibitory response of IDE is substrate-dependent, biphasic for Aβ degradation but monophasic for a shorter bradykinin-mimetic substrate. Our mutational analysis of IDE and peptide mass fingerprinting of GSNO-treated IDE using Fourier transform-ion cyclotron resonance mass spectrometer reveal a surprising interplay of Cys-178 with Cys-110 and Cys-819 for catalytic activity and with Cys-789 and Cys-966 for oligomerization. Cys-110 is near the zinc-binding catalytic center and is normally buried. The oxidation and nitrosylation of Cys-819 allow Cys-110 to be oxidized or nitrosylated, leading to complete inactivation of IDE. Cys-789 is spatially adjacent to Cys-966, and their nitrosylation and oxidation together trigger the oligomerization and inhibition of IDE. Interestingly, the Cys-178 modification buffers the inhibition caused by Cys-819 modification and prevents the oxidation or nitrosylation of Cys-110. The Cys-178 modification can also prevent the oligomerization-mediated inhibition. Thus, IDE can be intricately regulated by reactive oxygen or nitrogen species. The structure of IDE reveals the molecular basis for the long distance interactions of these cysteines and how they regulate IDE function.     

Functional and structural studies of a novel cold-adapted esterase from an Arctic intertidal metagenomic library

A novel cold-adapted lipolytic enzyme gene, est97, was identified from a high Arctic intertidal zone sediment metagenomic library. The deduced amino acid sequence of Est97 showed low similarity with other lipolytic enzymes, the maximum being 30 % identity with a putative lipase from Vibrio caribbenthicus. Common features of lipolytic enzymes, such as the GXSXG sequence motif, were detected. The gene product was over-expressed in Escherichia coli and purified. The recombinant Est97 (rEst97) hydrolysed various ρ-nitrophenyl esters with the best substrate being ρ-nitrophenyl hexanoate (K _m and k _cat of 39 μM and 25.8 s^?1, respectively). This esterase activity of rEst97 was optimal at 35 °C and pH 7.5 and the enzyme was unstable at temperatures above 25 °C. The apparent melting temperature, as determined by differential scanning calorimetry was 39 °C, substantiating Est97 as a cold-adapted esterase. The crystal structure of rEst97 was determined by the single wavelength anomalous dispersion method to 1.6 Å resolution. The protein was found to have a typical α/β-hydrolase fold with Ser144-His226-Asp197 as the catalytic triad. A suggested, relatively short lid domain of rEst97 is composed of residues 80–114, which form an α-helix and a disordered loop. The cold adaptation features seem primarily related to a high number of methionine and glycine residues and flexible loops in the high-resolution structures.     

Lipase of Mucor pusillus

Lipase of Mucor pusillus NRRL 2543 was recovered with ammonium sulfate precipitation, gel filtration on Sephadex G-75, and anion-exchange chromatography on diethylaminoethyl-Sephadex A-50. Maximal glycerol ester hydrolase (lipase) activity was observed at pH 5.0 to 5.5 and 50 C when trioctanoin and olive oil were used as substrates. The enzyme also showed esterase activity; it hydrolyzed, with the exception of methyl butyrate, all methyl esters tested. A minimum chain length of six carbons appeared to be a requirement for esterase activity, which was maximal at about pH 5.5 with methyl dodecanoate (C₁₂) as the substrate. Neither the glycerol ester hydrolase (lipase) nor the esterase activity of the enzyme appeared to be affected by thiol group inhibitors, chelating agents, and reducing compounds. On the other hand, hydrolysis of triolein and methyl dodecanoate was arrested to the same extent in the presence of diisopropyl fluorophosphate, which suggested the involvement of serine in the active center of the enzyme. The enzyme remained stable during a 30-day storage at - 10 C.     

Catalysis by dienelactone hydrolase: A variation on the protease mechanism

Dienelactone hydrolase (DLH), an enzyme from the β-ketoadipate pathway, catalyzes the hydrolysis of dienelactone to maleylacetate. Our inhibitor binding studies suggest that its substrate, dienelactone, is held in the active site by hydrophobic interactions around the lactone ring and by the ion pairs between its carboxylate and Arg-81 and Arg-206. Like the cysteine/serine proteases, DLH has a catalytic triad (Cys-123, His-202, Asp-171) and its mechanism probably involves the formation of covalently bound acyl intermediate via a tetrahedral intermediate. Unlike the proteases, DLH seems to protonate the incipient leaving group only after the collapse of the first tetrahedral intermediate, rendering DLH incapable of hydrolyzing amide analogues of its ester substrate. In addition, the triad His probably does not protonate the leaving group (enolate) or deprotonate the water for deacylation; rather, the enolate anion abstracts a proton from water and, in doing so, supplies the hydroxyl for deacylation. © 1993 Wiley-Liss, Inc.     

Crystal structure of vespid phospholipase A1 reveals insights into the mechanism for cause of membrane dysfunction

Vespid phospholipase A₁ (vPLA₁) from the black-bellied hornet (Vespa basalis) catalyzes the hydrolysis of emulsified phospholipids and shows potent hemolytic activity that is responsible for its lethal effect. To investigate the mechanism of vPLA₁ towards its function such as hemolysis and emulsification, we isolated vPLA₁ from V. basalis venom and determined its crystal structure at 2.5 Å resolution. vPLA₁ belongs to the α/β hydrolase fold family. It contains a tightly packed β-sheet surrounded by ten α-helices and a Gly-X-Ser-X-Gly motif, characteristic of a serine hydrolyase active site. A bound phospholipid was modeled into the active site adjacent to the catalytic Ser-His-Asp triad indicating that Gln95 is located at hydrogen-bonding distance from the substrate's phosphate group. Moreover, a hydrophobic surface comprised by the side chains of Phe53, Phe62, Met91, Tyr99, Leu197, Ala167 and Pro169 may serve as the acyl chain-binding site. vPLA₁ shows global similarity to the N-terminal domain of human pancreatic lipase (HPL), but with some local differences. The lid domain and the β9 loop responsible for substrate selectivity in vPLA₁ are shorter than in HPL. Thus, solvent-exposed hydrophilic residues can easily accommodate the polar head groups of phospholipids, thereby accounting for the high activity level of vPLA₁. Our result provides a potential explanation for the ability of vPLA₁ to hydrolyze phospholipids of cell membrane.     

The Chlamydia trachomatis CT149 protein exhibits esterase activity in vitro and catalyzes cholesteryl ester hydrolysis when expressed in HeLa cells

Chlamydia, like other intracellular bacteria, are auxotrophic for a variety of essential metabolites and obtain cholesterol and fatty acids from their eukaryotic host cell, however not many Chlamydia-specific enzymes have been identified that are involved in lipid metabolism. In silico analysis of one candidate Chlamydia trachomatis enzyme, annotated as a conserved putative hydrolase (CT149), identified two lipase/esterase GXSXG motifs, and a potential cholesterol recognition/interaction amino acid consensus (CRAC) sequence. His-tag purified recombinant CT149 exhibited ester hydrolysis activity in a nitrophenyl acetate-based cell-free assay system. When cholesteryl linoleate was used as substrate, ester hydrolysis occurred and production of cholesterol was detected by high performance liquid chromatography. Exogenous expression of transfected CT149 in HeLa cells resulted in a significant decrease of cytoplasmic cholesteryl esters within 48 h. These results demonstrate that CT149 has cholesterol esterase activity and is likely to contribute to the hydrolysis of eukaryotic cholesteryl esters during intracellular chlamydial growth.     

Hydrolysis of cyclic poly(ethylene terephthalate) trimers by a carboxylesterase from Thermobifida fusca KW3

We have identified a carboxylesterase produced in liquid cultures of the thermophilic actinomycete Thermobifida fusca KW3 that were supplemented with poly(ethylene terephthalate) fibers. The enzyme hydrolyzed highly hydrophobic, synthetic cyclic poly(ethylene terephthalate) trimers with an optimal activity at 60°C and a pH of 6. V _max and K _m values for the hydrolysis were 9.3 μmol⁻¹ min⁻¹ mg⁻¹ and 0.5 mM, respectively. The esterase showed high specificity towards short and middle chain-length fatty acyl esters of p-nitrophenol. The enzyme retained 37% of its activity after 96 h of incubation at 50°C and a pH of 8. Enzyme inhibition studies and analysis of substitution mutants of the carboxylesterase revealed the typical catalytic mechanism of a serine hydrolase with a catalytic triad composed of serine, glutamic acid, and histidine.     

Elucidation of the Specific Function of the Conserved Threonine Triad Responsible for Human l-Asparaginase Autocleavage and Substrate Hydrolysis

Our long-term goal is the design of a human l-asparaginase (hASNase3) variant, suitable for use in cancer therapy without the immunogenicity problems associated with the currently used bacterial enzymes. Asparaginases catalyze the hydrolysis of the amino acid asparagine to aspartate and ammonia. The key property allowing for the depletion of blood asparagine by bacterial asparaginases is their low micromolar K_M value. In contrast, human enzymes have a millimolar K_M for asparagine. Toward the goal of engineering an hASNase3 variant with micromolar K_M, we conducted a structure/function analysis of the conserved catalytic threonine triad of this human enzyme. As a member of the N-terminal nucleophile family, to become enzymatically active, hASNase3 must undergo autocleavage between residues Gly167 and Thr168. To determine the individual contribution of each of the three conserved active-site threonines (threonine triad Thr168, Thr186, Thr219) for the enzyme-activating autocleavage and asparaginase reactions, we prepared the T168S, T186V and T219A/V mutants. These mutants were tested for their ability to cleave and to catalyze asparagine hydrolysis, in addition to being examined structurally. We also elucidated the first N-terminal nucleophile plant-type asparaginase structure in the covalent intermediate state. Our studies indicate that, while not all triad threonines are required for the cleavage reaction, all are essential for the asparaginase activity. The increased understanding of hASNase3 function resulting from these studies reveals the key regions that govern cleavage and the asparaginase reaction, which may inform the design of variants that attain a low K_M for asparagine.     

Crystal structure of a cellulosomal family 3 carbohydrate esterase from Clostridium thermocellum provides insights into the mechanism of substrate recognition

The microbial degradation of the plant cell wall is of increasing industrial significance, exemplified by the interest in generating biofuels from plant cell walls. The majority of plant cell-wall polysaccharides are acetylated, and removal of the acetyl groups through the action of carbohydrate esterases greatly increases the efficiency of polysaccharide saccharification. Enzymes in carbohydrate esterase family 3 (CE3) are common in plant cell wall-degrading microorganisms but there is a paucity of structural and biochemical information on these biocatalysts. Clostridium thermocellum contains a single CE3 enzyme, CtCes3, which comprises two highly homologous (97% sequence identity) catalytic modules appended to a C-terminal type I dockerin that targets the esterase into the cellulosome, a large protein complex that catalyses plant cell wall degradation. Here, we report the crystal structure and biochemical properties of the N-terminal catalytic module (CtCes3-1) of CtCes3. The enzyme is a thermostable acetyl-specific esterase that exhibits a strong preference for acetylated xylan. CtCes3-1 displays an α/β hydrolase fold that contains a central five-stranded parallel twisted β-sheet flanked by six α-helices. In addition, the enzyme contains a canonical catalytic triad in which Ser44 is the nucleophile, His208 is the acid-base and Asp205 modulates the basic nature of the histidine. The acetate moiety is accommodated in a hydrophobic pocket and the negative charge of the tetrahedral transition state is stabilized through hydrogen bonds with the backbone N of Ser44 and Gly95 and the side-chain amide of Asn124.     

The Serratia marcescens bioH gene encodes an esterase

The 3.9 kb chromosomal DNA was cloned from Serratia marcescens Sr41, which confers on Escherichia coli cells a phenotype of clear halo formation on tributyrin agar plates. Three complete open reading frames (ORFs) were identified in the inserted DNA, and one ORF was demonstrated to encode a 28 kDa protein of 255 amino acids related to esterase activity. Interestingly, the ORF was 70% identical to a product of the E. coli bioH gene, which lies at a locus separated from the bioABFCD operon and acts in the early steps of the biotin synthetic pathway before pimeloyl-CoA synthesis. This gene complemented a bioH-deficient mutation of E. coli. From the sequence analysis, BioH is presumed to be a serine hydrolase, which belongs to the alpha/beta hydrolase-fold family comprising a wide variety of hydrolases including esterases. A catalytic triad composed of a nucleophilic residue (Ser80), an acidic residue (Asp206), and histidine (His234) was conserved in BioH, and the nucleophilic residue Ser, a catalytic center, was situated in the consensus sequence of G-X-S-X-G-G, a nucleophile elbow. Although the enzymatic function of BioH is not yet elucidated, the bioH gene products from S. marcescens and E. coli show esterase activity, which may imply the hydrolysis of a precursor leading to pimeloyl-CoA ester. The esterase activity of BioH and its CoA binding activity recently reported agree with a current hypothesis of pimeloyl-CoA ester synthesis from CoA and acylester derivatives including an acyl-carrier protein.     

The structure of a putative S‐formylglutathione hydrolase from Agrobacterium tumefaciens

The structure of the Atu1476 protein from Agrobacterium tumefaciens was determined at 2 Å resolution. The crystal structure and biochemical characterization of this enzyme support the conclusion that this protein is an S-formylglutathione hydrolase (AtuSFGH). The three-dimensional structure of AtuSFGH contains the α/β hydrolase fold topology and exists as a homo-dimer. Contacts between the two monomers in the dimer are formed both by hydrogen bonds and salt bridges. Biochemical characterization reveals that AtuSFGH hydrolyzes C—O bonds with high affinity toward short to medium chain esters, unlike the other known SFGHs which have greater affinity toward shorter chained esters. A potential role for Cys54 in regulation of enzyme activity through S-glutathionylation is also proposed.     

Solution NMR structure of the NlpC/P60 domain of lipoprotein Spr from Escherichia coli: structural evidence for a novel cysteine peptidase catalytic triad

Escherichia coli Spr is a membrane-anchored cell wall hydrolase. The solution NMR structure of the C-terminal NlpC/P60 domain of E. coli Spr described here reveals that the protein adopts a papain-like alpha+beta fold and identifies a substrate-binding cleft featuring several highly conserved residues. The active site features a novel Cys-His-His catalytic triad that appears to be a unique structural signature of this cysteine peptidase family. Moreover, the relative orientation of these catalytic residues is similar to that observed in the analogous Ser-His-His triad, a variant of the classic Ser-His-Asp charge relay system, suggesting the convergent evolution of a catalytic mechanism in quite distinct peptidase families.     

Substrate selectivity of bacterial monoacylglycerol lipase based on crystal structure

Lipases, which are conserved from bacteria to mammals, catalyze the hydrolysis of acylglycerol to free fatty acids and glycerol. Monoacylglycerol lipase (MGL) specifically catalyzes the hydrolysis of monoacylglycerol. Although there have been numerous studies of the structure of lipases, there have been few studies of MGL. Here, we report the crystal structure of authentic MGL isolated from Bacillus sp. H257 (bMGL). The crystal diffracts to 1.96 Å resolution. It belongs to space group P2₁2₁2, and the unit cell parameters are a = 99.7 Å, b = 106.1 Å and c = 43.0 Å. As in other lipases, three structural features for lipase activity are conserved in bMGL: the glycine-X-serine-X-glycine motif, catalytic triad and cap region. The structure of bMGL appears to be closed, as the cap region covers the active site entrance. The isolated bMGL hydrolyzed 2-AG, a known human MGL-specific substrate. Based on a 2-AG bound model, we discuss the substrate selectivity. The functional and structural features of bMGL provide insight how its substrate selectivity is determined and how specific inhibitors of bacterial MGL could be designed, which may be useful for development of novel antibiotics.     

Characterization of a novel cold-active esterase isolated from swamp sediment metagenome

A functional screen of a metagenomic library from “Upo” swamp sediment in Korea identified a gene EstL28, the product of which displayed lipolytic properties on a tributyrin-supplemented medium. The EstL28 sequence encodes a 290 amino acid protein (designated as EstL28), with a predicted molecular weight of 31.3 kDa. The encoded EstL28 protein exhibited the highest sequence similarity (45 %) to a hydrolase found in Streptococcus sanguinis. Phylogenetic analysis indicated that EstL28 belongs to a currently uncharacterized family of esterases. Within the conserved α/β-hydrolase 6 domain, the EstL28 retains the catalytic triad Ser₁₀₃–Asp₂₄₈–His₂₆₈ that is typical of esterases. The Ser₁₀₃ residue in the catalytic triad is located in the consensus pentapeptide motif GXSXG. The purified EstL28 enzyme worked optimally at 35 °C and pH 8.5 and remained stable at temperatures lower than 20 °C. The catalytic activity of EstL28 was maximal with p-nitrophenyl butyrate, indicating that it was an esterase. This enzyme also exhibited stable activity in the presence of methanol, ethanol, isopropanol, and dimethyl sulfoxide. Therefore, the level of stability in organic solvents and cold temperature suggests that EstL28 has potential for many biotechnological applications.     

Biochemical and structural characterization of a novel cold-active esterase-like protein from the psychrophilic yeast Glaciozyma antarctica

Dienelactone hydrolase, an α/β hydrolase enzyme, catalyzes the hydrolysis of dienelactone to maleylacetate, an intermediate for the Krebs cycle. Genome sequencing of the psychrophilic yeast, Glaciozyma antarctica predicted a putative open reading frame (ORF) for dienelactone hydrolase (GaDlh) with 52% sequence similarity to that from Coniophora puteana. Phylogenetic tree analysis showed that GaDlh is closely related to other reported dienelactone hydrolases, and distantly related to other α/β hydrolases. Structural prediction using MODELLER 9.14 showed that GaDlh has the same α/β hydrolase fold as other dienelactone hydrolases and esterase/lipase enzymes, with a catalytic triad consisting of Cys–His–Asp and a G–x–C–x–G–G motif. Based on the predicted structure, GaDlh exhibits several characteristics of cold-adapted proteins such as glycine clustering in the binding pocket, reduced protein core hydrophobicity, and the absence of proline residues in loops. The putative ORF was amplified, cloned, and overexpressed in an Escherichia coli expression system. The recombinant protein was overexpressed as soluble proteins and was purified via Ni–NTA affinity chromatography. Biochemical characterization of GaDlh revealed that it has an optimal temperature at 10 °C and that it retained almost 90% of its residual activity when incubated for 90 min at 10 °C. The optimal pH was at pH 8.0 and it was stable between pH 5–9 when incubated for 60 min (more than 50% residual activity). Its K_m value was 256 μM and its catalytic efficiency was 81.7 s⁻¹. To our knowledge, this is the first report describing a novel cold-active dienelactone hydrolase-like protein.

     

Identification and Characterization of a Cold-Active Phthalate Esters Hydrolase by Screening a Metagenomic Library Derived from Biofilms of a Wastewater Treatment Plant

A cold-active phthalate esters hydrolase gene (designated dphB) was identified through functional screening of a metagenomic library derived from biofilms of a wastewater treatment plant. The enzyme specifically catalyzed the hydrolysis of dipropyl phthalate, dibutyl phthalate, and dipentyl phthalate to the corresponding monoalkyl phthalate esters at low temperatures. The catalytic triad residues of DphB were proposed to be Ser159, Asp251, and His281.     

Cloning of a gene encoding cinnamoyl ester hydrolase from the ruminai bacterium Butyrivibrio fibrisolvens E14 by a novel method

Abstract A gene ( cin I) encoding a cinnamoyl ester hydrolase (CEH) has been isolated from the ruminai bacterium, Butyrivibrio fibrisohens E14, using a model substrate, MUTMAC [4-methylumbelliferoyl ( p -trimethylammonium cinnamate chloride)]. CinI has significant amino-acid similarities with members of a large and diverse family of hydrolases with a serine/aspartic acid/ histidine catalytic triad. Our analyses identified two previously unclassified amino acid sequences, the amino-terminal domain of unknown function in XynZ from Clostridium thermocellum and XynC, an acetylxylan esterase from Caldicellulosiruptor saccharolyticus , as members of the same family of hydrolases. A previously described esterase with CEH activity, XylD from Pseudomonas fluorescens ssp. cellulosa , is not similar to CinI. CinI was expressed at high levels in the periplasmic fraction of E. coli TOPP2 and released ferulic acid from Fara [5- O -( trans -feruloyl)-arabinofuranose] prepared from wheat bran.     

The crystal structure of an esterase from the hyperthermophilic microorganism <Emphasis Type="Italic">Pyrobaculum calidifontis</Emphasis> VA1 explains its enantioselectivity

The highly thermostable esterase from the hyperthermophilic archaeon Pyrobaculum calidifontis VA1 (PestE) shows high enantioselectivity (E?>?100) in the kinetic resolution of racemic chiral carboxylic acids, but little selectivity towards acetates of tertiary alcohols (E?=?2–4). To explain these unique properties, its crystal structure has been determined at 2.0 Å resolution. The enzyme is a member of the hormone-sensitive lipase group (group H) of the esterase/lipase superfamily on the basis of the amino acid sequence identity. The PestE structure shows a canonical α/β-hydrolase fold as core domain with a cap structure at the C-terminal end of the β-sheet. A tetramer in the crystal packing is formed of two dimers; the dimeric form is observed in solution. Conserved dimers and even tetramers are found in other group H proteins. The amino acid residues Ser157, His284, and Asp254 form the catalytic triad, which is typically found in α/β-hydrolases. The oxyanion hole is composed of Gly85 and Gly86 within the conserved sequence motif HGGG(M,F,W) (amino acid residues 83–87) and Ala158. With the elucidated structure, experimental results about enantioselectivity towards the two model substrate classes (as exemplified for 3-phenylbutanoic acid ethyl ester and 1,1,1-trifluoro-2-phenylbut-3-yn-2-yl acetate) could be explained by molecular modeling. For both enantiomers of the tertiary alcohol, orientations in two binding pockets were obtained without significant energy differences corresponding to the observed low enantioselectivity due to missing steric repulsions. In contrast, for the carboxylic acid ester, two different orientations with significant energy differences for each enantiomer were found matching the high E values.