Antibacterial mechanisms of GN-2 derived peptides and peptoids against Escherichia coli

Escherichia coli is the main etiological agent of urinary trait infections, able to form biofilms in indwelling devices, resulting in chronic infections which are refractory to antibiotics treatment. In this study, we investigated the antimicrobial and anti-biofilm properties exerted against E. coli ATCC 25922, by a set of peptoids and peptides modeled upon the peptide GN-2, previously reported as a valid antimicrobial agent. The putative antimicrobials were designed to evaluate the effect of cationicity, hydrophobicity and their partitioning on the overall properties against planktonic cells and biofilms as well as on LPS binding, permeabilization of Gram-negative bacteria membranes and hemolysis. The data demonstrated that peptides are stronger antimicrobials than the analogue peptoids which in return have superior anti-biofilm properties. In this study, we present evidence that peptides antimicrobial activity correlates with enhanced LPS binding and hydrophobicity but is not affected by partitioning. The data demonstrated that the enhanced anti-biofilm properties of the peptoids are associated with decreased hydrophobicity and increased penetration of the inner membrane, compared to that of their peptide counterpart, suggesting that the characteristic flexibility of peptoids or their lack of H-bonding donors in their backbone, would play a role in their ability to penetrate bacterial membranes.     

Osmoprotective polymer additives attenuate the membrane pore‐forming activity of antimicrobial peptoids

Antimicrobial peptides (AMPs) are critical components of the innate immune system and exhibit bactericidal activity against a broad spectrum of bacteria. We investigated the use of N‐substituted glycine peptoid oligomers as AMP mimics with potent antimicrobial activity. The antimicrobial mechanism of action varies among different AMPs, but many of these peptides can penetrate bacterial cell membranes, causing cell lysis. We previously hypothesized that amphiphilic cyclic peptoids may act through a similar pore formation mechanism against methicillin‐resistant Staphylococcus aureus (MRSA). Peptoid‐induced membrane disruption is observed by scanning electron microscopy and results in a loss of membrane integrity. We demonstrate that the antimicrobial activity of the peptoids is attenuated with the addition of polyethylene glycol osmoprotectants, signifying protection from a loss of osmotic balance. This decrease in antimicrobial activity is more significant with larger osmoprotectants, indicating that peptoids form pores with initial diameters of ～2.0–3.8 nm. The initial membrane pores formed by cyclic peptoid hexamers are comparable in diameter to those formed by larger and structurally distinct AMPs. After 24 h, the membrane pores expand to >200 nm in diameter. Together, these results indicate that cyclic peptoids exhibit a mechanism of action that includes effects manifested at the cell membrane of MRSA. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 227–236, 2015.     

Peptoid drug discovery and optimization via surface X-ray scattering

Synthetic polymers mimicking antimicrobial peptides have drawn considerable interest as potential therapeutics. N-substituted glycines, or peptoids, are recognized by their in vivo stability and ease of synthesis. Peptoids are thought to act primarily on the negatively charged lipids that are abundant in bacterial cell membranes. A mechanistic understanding of lipid–peptoid interaction at the molecular level will provide insights for rational design and optimization of peptoids. Here, we highlight recent studies that utilize synchrotron liquid surface X-ray scattering to characterize the underlying peptoid interactions with bacterial and eukaryotic membranes. Cellular membranes are highly complex, and difficult to characterize at the molecular level. Model systems including Langmuir monolayers, are used in these studies to reduce system complexity. The general workflow of these systems and the corresponding data analysis techniques are presented alongside recent findings. These studies investigate the role of peptoid physicochemical characteristics on membrane activity. Specifically, the roles of cationic charge, conformational constraint via macrocyclization, and hydrophobicity are shown to correlate their membrane interactions to biological activities in vitro. These structure–activity relationships have led to new insights into the mechanism of action by peptoid antimicrobials, and suggest optimization strategies for future therapeutics based on peptoids.     

Cationic peptide-induced remodelling of model membranes: direct visualization by in situ atomic force microscopy

Our understanding of how antimicrobial and cell-penetrating peptides exert their action at cell membranes would benefit greatly from direct visualization of their modes of action and possible targets within the cell membrane. We previously described how the cationic antimicrobial peptide, indolicidin, interacted with mixed zwitterionic planar lipid bilayers as a function of both peptide concentration and lipid composition [Shaw, J.E. et al., 2006. J. Struct. Biol. 154 (1), 42-58]. In the present report, in situ atomic force microscopy was used to characterize the interactions between three families of cationic peptides: (1) tryptophan-rich antimicrobial peptides--indolicidin and two of its analogues, (2) an amphiphilic alpha-helical membranolytic peptide--melittin, and (3) an arginine-rich cell-penetrating peptide--Tat with phase-separated planar bilayers containing 1,2-dioleoyl-sn-glycerol-3-phosphocholine (DOPC)/1,2-distearoyl-sn-glycerol-3-phosphocholine (DSPC) or DOPC/N-stearoyl-D-erythro-sphingosylphosphorylcholine (SM)/cholesterol. We found that these cationic peptides all induced remodelling of the model membranes in a concentration, and family-dependent manner. At low peptide concentration, these cationic peptides, despite their different biological roles, all appeared to reduce the interfacial line tension at the domain boundary between the liquid-ordered and liquid-disordered domains. Only at high peptide concentration was the membrane remodelling induced by these peptides morphologically distinct among the three families. While the transformation caused by indolicidin and its analogues were structurally similar, the concentration required to initiate the transformation was strongly dependent on the hydrophobicity of the peptide. Our use of lipid compositions with no net charge minimized the electrostatic interactions between the cationic peptides and the model supported bilayers. These results suggest that peptides within the same functional family have a common mechanism of action, and that membrane insertion of short cationic peptides at low peptide concentration may also alter membrane structure through a common mechanism regardless of the peptide's origin.     

Roles of hydrophobicity and charge distribution of cationic antimicrobial peptides in peptide-membrane interactions

Cationic antimicrobial peptides (CAPs) occur as important innate immunity agents in many organisms, including humans, and offer a viable alternative to conventional antibiotics, as they physically disrupt the bacterial membranes, leading to membrane lysis and eventually cell death. In this work, we studied the biophysical and microbiological characteristics of designed CAPs varying in hydrophobicity levels and charge distributions by a variety of biophysical and biochemical approaches, including in-tandem atomic force microscopy, attenuated total reflection-FTIR, CD spectroscopy, and SDS-PAGE. Peptide structural properties were correlated with their membrane-disruptive abilities and antimicrobial activities. In bacterial lipid model membranes, a time-dependent increase in aggregated β-strand-type structure in CAPs with relatively high hydrophobicity (such as KKKKKKALFALWLAFLA-NH(2)) was essentially absent in CAPs with lower hydrophobicity (such as KKKKKKAAFAAWAAFAA-NH(2)). Redistribution of positive charges by placing three Lys residues at both termini while maintaining identical sequences minimized self-aggregation above the dimer level. Peptides containing four Leu residues were destructive to mammalian model membranes, whereas those with corresponding Ala residues were not. This finding was mirrored in hemolysis studies in human erythrocytes, where Ala-only peptides displayed virtually no hemolysis up to 320 μM, but the four-Leu peptides induced 40-80% hemolysis at the same concentration range. All peptides studied displayed strong antimicrobial activity against Pseudomonas aeruginosa (minimum inhibitory concentrations of 4-32 μM). The overall findings suggest optimum routes to balancing peptide hydrophobicity and charge distribution that allow efficient penetration and disruption of the bacterial membranes without damage to mammalian (host) membranes.     

Effects of the peptide Magainin H2 on Supported Lipid Bilayers studied by different biophysical techniques

Given the increasing trend in bacterial antibiotic resistance, research on antimicrobial peptides and their mechanisms of action has become of huge relevance in the last years. Several studies have investigated the effects of a large variety of antimicrobial peptides directly on bacteria or on model lipid bilayers. In the case of model lipid bilayers, different systems are typically exploited; however, different results could be obtained due to the specific properties of the used system. Supported Lipid Bilayers and Giant Unilamellar Vesicles are among the most popular model systems. Here we used Atomic Force Microscopy and fluorescence microscopy to study the interaction of the antimicrobial peptide Magainin H2, an analog of Magainin 2 with increased hydrophobicity, on Supported Lipid Bilayers. We found that, for this kind of model bilayer, due to its strong interaction with the support, the lateral expansion of the membrane induced by the interaction with the peptides is initially inhibited and subsequently proceeds creating new bilayer regions with many defects. This scenario gives rise in Supported Lipid Bilayers to effects like initial increase of lateral pressure, formation of lipid tubes to release this increase, or development of bilayer regions with lower lipid density. Our results highlight that care should be given to the selected model system when studying and comparing the interaction of peptides with other lipid bilayer model systems.     

Structure of magainin and alamethicin in model membranes studied by x-ray reflectivity

We have investigated the structure of lipid bilayers containing varied molar ratios of different lipids and the antimicrobial peptides magainin and alamethicin. For this structural study, we have used x-ray reflectivity on highly aligned solid-supported multilamellar lipid membranes. The reflectivity curves have been analyzed by semi-kinematical reflectivity theory modeling the bilayer density profile rho(z). Model simulations of the reflectivity curves cover a large range of vertical momentum transfer q(z), and yield excellent agreement between data and theory. The structural changes observed as a function of the molar peptide/lipid concentration P/L are discussed in a comparative way.     

Interaction of cationic antimicrobial peptides with model membranes

A series of natural and synthetic cationic antimicrobial peptides from various structural classes, including alpha-helical, beta-sheet, extended, and cyclic, were examined for their ability to interact with model membranes, assessing penetration of phospholipid monolayers and induction of lipid flip-flop, membrane leakiness, and peptide translocation across the bilayer of large unilamellar liposomes, at a range of peptide/lipid ratios. All peptides were able to penetrate into monolayers made with negatively charged phospholipids, but only two interacted weakly with neutral lipids. Peptide-mediated lipid flip-flop generally occurred at peptide concentrations that were 3- to 5-fold lower than those causing leakage of calcein across the membrane, regardless of peptide structure. With the exception of two alpha-helical peptides V681(n) and V25(p,) the extent of peptide-induced calcein release from large unilamellar liposomes was generally low at peptide/lipid molar ratios below 1:50. Peptide translocation across bilayers was found to be higher for the beta-sheet peptide polyphemusin, intermediate for alpha-helical peptides, and low for extended peptides. Overall, whereas all studied cationic antimicrobial peptides interacted with membranes, they were quite heterogeneous in their impact on these membranes.     

Lipid-induced conformation and lipid-binding properties of cytolytic and antimicrobial peptides: determination and biological specificity

While antimicrobial and cytolytic peptides exert their effects on cells largely by interacting with the lipid bilayers of their membranes, the influence of the cell membrane lipid composition on the specificity of these peptides towards a given organism is not yet understood. The lack of experimental model systems that mimic the complexity of natural cell membranes has hampered efforts to establish a direct correlation between the induced conformation of these peptides upon binding to cell membranes and their biological specificities. Nevertheless, studies using model membranes reconstituted from lipids and a few membrane-associated proteins, combined with spectroscopic techniques (i.e. circular dichroism, fluorescence spectroscopy, Fourier transform infra red spectroscopy, etc.), have provided information on specific structure-function relationships of peptide-membrane interactions at the molecular level. Reversed phase-high performance chromatography (RP-HPLC) and surface plasmon resonance (SPR) are emerging techniques for the study of the dynamics of the interactions between cytolytic and antimicrobial peptides and lipid surfaces. Thus, the immobilization of lipid moieties onto RP-HPLC sorbent now allows the investigation of peptide conformational transition upon interaction with membrane surfaces, while SPR allows the observation of the time course of peptide binding to membrane surfaces. Such studies have clearly demonstrated the complexity of peptide-membrane interactions in terms of the mutual changes in peptide binding, conformation, orientation, and lipid organization, and have, to a certain extent, allowed correlations to be drawn between peptide conformational properties and lytic activity.     

Aqueous solubility and membrane interactions of hydrophobic peptides with peptoid tags

Lysine tagging of hydrophobic peptides of parent sequence KKAAALAAAAALAAWAALAAAKKKK-NH(2) has been shown to facilitate their synthesis and purification through water solubilization, yet not impact on the intrinsic properties of the hydrophobic core sequence with respect to its insertion into membranes in an alpha-helical conformation. However, due to their positively charged character, such peptides often become bound to phospholipid head groups in membrane surfaces, which inhibits their transbilayer insertion and/or prevents their transport across cellular bilayers. We sought to develop more neutral peptides of membrane-permeable character by replacing most Lys residues with uncharged peptoid [N-(R)glycyl] residues, which might similarly confer water solubility while retaining membrane-interactive properties of the hydrophobic core. Several "peptoid-tagged" derivatives of the parent peptide were prepared with varying peptoid content, with five of the six Lys residues replaced with peptoids Nala and/or Nval. Conformations of these peptides measured by circular dichroism spectroscopy demonstrated that these water-soluble peptides retain the alpha-helix structure in micelles (lysophosphatidylcholine and sodium dodecyl sulfate) notwithstanding the known helix-breaking capacity of the peptoid tags. Blue shifts in Trp fluorescence spectra and quenching experiments with acrylamide confirmed that peptoid-tagged peptides insert spontaneously into micellar membranes. Results suggest that upon introduction of uncharged tags, the interaction between the membrane and the peptides is dominated by the hydrophobicity of the peptide core rather than the electrostatic interactions between the Lys and the head groups of the lipids. The overall findings indicate that peptoid residues are effective surrogates for Lys as uncharged water-solubilizing tags and, as such, provide a potentially valuable feature of design of membrane-interactive peptides.     

In situ solid-state NMR study of antimicrobial peptide interactions with erythrocyte membranes

Antimicrobial peptides are promising therapeutic agents to mitigate the global rise of antibiotic resistance. They generally act by perturbing the bacterial cell membrane and are thus less likely to induce resistance. Because they are membrane-active molecules, it is critical to verify and understand their potential action toward eukaryotic cells to help design effective and safe drugs. In this work, we studied the interaction of two antimicrobial peptides, aurein 1.2 and caerin 1.1, with red blood cell (RBC) membranes using in situ ³¹P and ²H solid-state NMR (SS-NMR). We established a protocol to integrate up to 25% of deuterated fatty acids in the membranes of ghosts, which are obtained when hemoglobin is removed from RBCs. Fatty acid incorporation and the integrity of the lipid bilayer were confirmed by SS-NMR and fluorescence confocal microscopy. Leakage assays were performed to assess the lytic power of the antimicrobial peptides. The in situ perturbation of the ghost membranes by aurein 1.2 and caerin 1.1 revealed by ³¹P and ²H SS-NMR is consistent with membrane perturbation through a carpet mechanism for aurein 1.2, whereas caerin 1.1 acts on RBCs via pore formation. These results are compatible with fluorescence microscopy images of the ghosts. The peptides interact with eukaryotic membranes following similar mechanisms that take place in bacteria, highlighting the importance of hydrophobicity when determining such interactions. Our work bridges model membranes and in vitro studies and provides an analytical toolbox to assess drug toxicity toward eukaryotic cells.     

Membrane and lipopolysaccharide interactions of C-terminal peptides from S1 peptidases

The mechanisms underlying antimicrobial and anti-endotoxic effects were investigated for a series of structurally related peptides derived from the C-terminal region of S1 peptidases. For this purpose, results on bacterial killing were compared to those on peptide-induced liposome leakage, and to ellipsometry and dual polarization interferometry results on peptide binding to, and disordering of, supported lipid bilayers. Furthermore, the ability of these peptides to block endotoxic effects caused by bacterial lipopolysaccharide (LPS), monitored through NO production in macrophages, was compared to the binding of these peptides to LPS, and to secondary structure formation in the peptide/LPS complex. Bacteria killing, occurring through peptide-induced membrane lysis, was found to correlate with liposome rupture, and with the extent of peptide binding to the lipid membrane, no adsorption threshold for peptide insertion being observed. Membrane and LPS binding was found to depend on peptide net charge, illustrated by LPS binding increasing with increasing peptide charge, and peptides with net negative charge being unable to lyse membranes, kill bacteria, and block LPS-induced endotoxic effect. These effects were, however, also influenced by peptide hydrophobicity. LPS binding was furthermore demonstrated to be necessary, but not sufficient, for anti-endotoxic effect of these peptides. Circular dichroism spectroscopy showed that pronounced helix formation occurs in peptide/LPS complexes for all peptides displaying anti-endotoxic effect, hence potentially linked to this functionality. Similarly, ordered secondary structure formation was correlated to membrane binding, lysis, and antimicrobial activity of these peptides. Finally, preferential binding of these peptides to LPS over the lipid membrane was demonstrated.     

Induction of non-lamellar lipid phases by antimicrobial peptides: a potential link to mode of action

Antimicrobial peptides are naturally produced by numerous organisms including insects, plants and mammals. Their non-specific mode of action is thought to involve the transient perturbation of bacterial membranes but the molecular mechanism underlying the rearrangement of the lipid molecules to explain the formation of pores and micelles is still poorly understood. Biological membranes mostly adopt planar lipid bilayers; however, antimicrobial peptides have been shown to induce non-lamellar lipid phases which may be intimately linked to their proposed mechanisms of action. This paper reviews antimicrobial peptides that alter lipid phase behavior in three ways: peptides that induce positive membrane curvature, peptides that induce negative membrane curvature and peptides that induce cubic lipid phases. Such structures can coexist with the bilayer structure, thus giving rise to lipid polymorphism induced upon addition of antimicrobial peptides. The discussion addresses the implications of induced lipid phases for the mode of action of various antimicrobial peptides.     

Mechanism of membrane perturbation by the HIV-1 gp41 membrane-proximal external region and its modulation by cholesterol

Membrane-activity of the glycoprotein 41 membrane-proximal external region (MPER) is required for HIV-1 membrane fusion. Consequently, its inhibition results in viral neutralization by the antibody 4E10. Previous studies suggested that MPER might act during fusion by locally perturbing the viral membrane, i.e., following a mechanism similar to that proposed for certain antimicrobial peptides. Here, we explore the molecular mechanism of how MPER permeates lipid monolayers containing cholesterol, a main component of the viral envelope, using grazing incidence X-ray diffraction and X-ray reflectivity. Our studies reveal that helical MPER forms lytic pores under conditions not affecting the lateral packing order of lipids. Moreover, we observe an increment of the surface area occupied by MPER helices in cholesterol-enriched membranes, which correlates with an enhancement of the 4E10 epitope accessibility in lipid vesicles. Thus, our data support the view that curvature generation by MPER hydrophobic insertion into the viral membrane is functionally more relevant than lipid packing disruption.     

Effect of physicochemical properties of peptides from soy protein on their antimicrobial activity

Antimicrobial peptides (AMPs) kill microbial cells through insertion and damage/permeabilization of the cytoplasmic cell membranes and has applications in food safety and antibiotic replacement. Soy protein is an attractive, abundant natural source for commercial production of AMPs. In this research, explicit solvent molecular dynamics (MD) simulation was employed to investigate the effects of (i) number of total and net charges, (ii) hydrophobicity (iii) hydrophobic moment and (iv) helicity of peptides from soy protein on their ability to bind to lipid bilayer and their transmembrane aggregates to form pores. Interaction of possible AMP segments from soy protein with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPC/POPG) bilayers, a mimic of bacterial cell membrane, was investigated. Pore formation was insensitive to helicity and occurred for hydrophobicity threshold in the range of −0.3–0 kcal/mol, hydrophobic moment threshold of 0.3 kcal/mol, net charge threshold of 2. Though low hydrophobicity and high number of charges help in the formation of water channel for transmembrane aggregates, insertion of peptides with these properties requires overcome of energy barrier, as shown by potential of mean force calculations, thereby resulting in low antimicrobial activity. Experimental evaluation of antimicrobial activity of these peptides against Gram positive L. monocytogenes and Gram negative E. coli as obtained by spot-on-lawn assay was consistent with simulation results. These results should help in the development of guidelines for selection of peptides with antimicrobial activity based on their physicochemical properties.     

Bacterial species selective toxicity of two isomeric alpha/beta-peptides: role of membrane lipids

We have studied how membrane interactions of two synthetic cationic antimicrobial peptides with alternating alpha- and beta-amino acid residues ("alpha/beta-peptides") impact toxicity to different prokaryotes. Electron microscopic examination of thin sections of Escherichia coli and of Bacillus subtilis exposed to these two alpha/beta-peptides reveals different structural changes in the membranes of these bacteria. These two peptides also have very different effects on the morphology of liposomes composed of phosphatidylethanolamine and phosphatidylglycerol in a 2:1 molar ratio. Freeze fracture electron microscopy indicates that with this lipid mixture, alpha/beta-peptide I induces the formation of a sponge phase. 31P NMR and X-ray diffraction are consistent with this conclusion. In contrast, with alpha/beta-peptide II and this same lipid mixture, a lamellar phase is maintained, but with a drastically reduced d-spacing. alpha/beta-Peptide II is more lytic to liposomes composed of these lipids than is I. These findings are consistent with the greater toxicity of alpha/beta-peptide II, relative to alpha/beta-peptide I, to E. coli, a bacterium having a high content of phosphatidylethanolamine. In contrast, both alpha/beta-peptides display similar toxicity toward B. subtilis, in accord with the greater anionic lipid composition in its membrane. This work shows that variations in the selectivity of these peptidic antimicrobial peptides toward different strains of bacteria can be partly determined by the lipid composition of the bacterial cell membrane.     

Basis for selectivity of cationic antimicrobial peptides for bacterial versus mammalian membranes

Novel cationic antimicrobial peptides typified by structures such as KKKKKKAAXAAWAAXAA-NH2, where X = Phe/Trp, and several of their analogues display high activity against a variety of bacteria but exhibit no hemolytic activity even at high dose levels in mammalian erythrocytes. To elucidate their mechanism of action and source of selectivity for bacterial membranes, phospholipid mixtures mimicking the compositions of natural bacterial membranes (containing anionic lipids) and mammalian membranes (containing zwitterionic lipids + cholesterol) were challenged with the peptides. We found that peptides readily inserted into bacterial lipid mixtures, although no insertion was detected in model "mammalian" membranes. The depth of peptide insertion into model bacterial membranes was estimated by Trp fluorescence quenching using doxyl groups variably positioned along the phospholipid acyl chains. Peptide antimicrobial activity generally increased with increasing depth of peptide insertion. The overall results, in conjunction with molecular modeling, support an initial electrostatic interaction step in which bacterial membranes attract and bind peptide dimers onto the bacterial surface, followed by the "sinking" of the hydrophobic core segment to a peptide sequence-dependent depth of approximately 2.5-8 A into the membrane, largely parallel to the membrane surface. Antimicrobial activity was likely enhanced by the fact that the peptide sequences contain AXXXA sequence motifs, which promote their dimerization, and possibly higher oligomerization, as assessed by SDS-polyacrylamide gel analysis and fluorescence resonance energy transfer experiments. The high selectivity of these peptides for nonmammalian membranes, combined with their activity toward a wide spectrum of Gram-negative and Gram-positive bacteria and yeast, while retaining water solubility, represent significant advantages of this class of peptides.     

Membrane interactions of designed cationic antimicrobial peptides: the two thresholds

Novel cationic antimicrobial peptides (CAPs) designed in our lab-typified by sequences such as KKKKKKAAX-AAXAAXAA-NH(2), where X = Phe/Trp-display high antibacterial activity but exhibit little or no hemolytic activity towards human red blood cells even at high doses. To clarify the mechanism of their selectivity for bacterial versus mammalian membranes and to increase our understanding of the relationships between primary sequence and bioactivity, a library of derivatives was prepared by increasing segmental hydrophobicity, in which systematic substitutions of Ala for two, three, or four Leu residues were made. Conformationally constrained dimeric and cyclic derivatives were also synthesized. The peptides were examined for activity against pathogenic bacteria (Pseudomonas aeruginosa), hemolytic activity on human red blood cells, and insertion into models of natural bacterial membranes (containing anionic lipids) and mammalian membranes (containing zwitterionic lipids + cholesterol). Results were compared with corresponding properties of the natural CAPs magainin and cecropin. Using circular dichroism and fluorescence spectroscopy, we found that peptide conformation and membrane insertion were sequence dependent, both upon the number of Leu residues, and upon their positions along the hydrophobic core. Membrane disruption was likely enhanced by the fact that the peptides contain potent dimerization-promoting sequence motifs, as assessed by SDS-PAGE gel analysis. The overall results led us to identify distinctions in the mechanism of actions of these CAPs for disruption of bacterial versus mammalian membranes, the latter dependent on surpassing a "second hydrophobicity threshold" for insertion into zwitterionic membranes.     

Hydrophobic mismatch of mobile transmembrane helices: Merging theory and experiments

Hydrophobic mismatch still represents a puzzle for transmembrane peptides, despite the apparent simplicity of this concept and its demonstrated validity in natural membranes. Using a wealth of available experimental ((2))H NMR data, we provide here a comprehensive explanation of the orientation and dynamics of model peptides in lipid bilayers, which shows how they can adapt to membranes of different thickness. The orientational adjustment of transmembrane α-helices can be understood as the result of a competition between the thermodynamically unfavorable lipid repacking associated with peptide tilting and the optimization of peptide/membrane hydrophobic coupling. In the positive mismatch regime (long-peptide/thin-membrane) the helices adapt mainly via changing their tilt angle, as expected from simple geometrical predictions. However, the adaptation mechanism varies with the peptide sequence in the flanking regions, suggesting additional effects that modulate hydrophobic coupling. These originate from re-adjustments of the peptide hydrophobic length and they depend on the hydrophobicity of the flanking region, the strength of interfacial anchoring, the structural flexibility of anchoring side-chains and the presence of alternative anchoring residues.     

Amphipathic, alpha-helical antimicrobial peptides

Gene-encoded antimicrobial peptides are an important component of host defense in animals ranging from insects to mammals. They do not target specific molecular receptors on the microbial surface, but rather assume amphipathic structures that allow them to interact directly with microbial membranes, which they can rapidly permeabilize. They are thus perceived to be one promising solution to the growing problem of microbial resistance to conventional antibiotics. A particularly abundant and widespread class of antimicrobial peptides are those with amphipathic, alpha-helical domains. Due to their relatively small size and synthetic accessibility, these peptides have been extensively studied and have generated a substantial amount of structure-activity relationship (SAR) data. In this review, alpha-helical antimicrobial peptides are considered from the point of view of six interrelated structural and physicochemical parameters that modulate their activity and specificity: sequence, size, structuring, charge, amphipathicity, and hydrophobicity. It begins by providing an overview of how these vary in peptides from different natural sources. It then analyzes how they relate to the currently accepted model for the mode of action of alpha-helical peptides, and discusses what the numerous SAR studies that have been carried out on these compounds and their analogues can tell us. A comparative analysis of the many alpha-helical, antimicrobial peptide sequences that are now available then provides further information on how these parameters are distributed and interrelated. Finally, the systematic variation of parameters in short model peptides is used to throw light on their role in antimicrobial potency and specificity. The review concludes with some considerations on the potentials and limitations for the development of alpha-helical, antimicrobial peptides as antiinfective agents.