The use of styrene-maleic acid copolymer (SMA) for studies on T cell membrane rafts

An emerging alternative to the use of detergents in biochemical studies on membrane proteins is apparently the use styrene-maleic acid (SMA) amphipathic copolymers. These cut the membrane into nanodiscs (SMA-lipid particles, SMALPs), which contain membrane proteins possibly surrounded by their native lipid environment. We examined this approach for studies on several types of T cell membrane proteins, previously defined as raft or non-raft associated, to see whether the properties of the raft derived SMALPs differ from non-raft SMALPs. Our results indicate that two types of raft proteins, GPI-anchored proteins and two Src family kinases, are markedly present in membrane fragments much larger (>250?nm) than those containing non-raft proteins (<20?nm). Lipid probes sensitive to membrane fluidity (membrane order) indicate that the lipid environment in the large SMALPs is less fluid (more ordered) than in the small ones which may indicate the presence of a more ordered lipid L_o phase which is characteristic of membrane rafts. Also the lipid composition of the small vs. large SMALPs is markedly different – the large ones are enriched in cholesterol and lipids containing saturated fatty acids. In addition, we confirm that T cell membrane proteins present in SMALPs can be readily immunoisolated. Our results support the use of SMA as a potentially better (less artifact prone) alternative to detergents for studies on membrane proteins and their complexes, including membrane rafts.     

Structure and function of membrane proteins encapsulated in a polymer-bound lipid bilayer

New technologies for the purification of stable membrane proteins have emerged in recent years, in particular methods that allow the preparation of membrane proteins with their native lipid environment. Here, we look at the progress achieved with the use of styrene-maleic acid copolymers (SMA) which are able to insert into biological membranes forming nanoparticles containing membrane proteins and lipids. This technology can be applied to membrane proteins from any host source, and, uniquely, allows purification without the protein ever being removed from a lipid bilayer. Not only do these SMA lipid particles (SMALPs) stabilise membrane proteins, allowing structural and functional studies, but they also offer opportunities to understand the local lipid environment of the host membrane. With any new or different method, questions inevitably arise about the integrity of the protein purified: does it retain its activity; its native structure; and ability to perform its function? How do membrane proteins within SMALPS perform in existing assays and lend themselves to analysis by established methods? We outline here recent work on the structure and function of membrane proteins that have been encapsulated like this in a polymer-bound lipid bilayer, and the potential for the future with this approach. This article is part of a Special Issue entitled: Beyond the Structure-Function Horizon of Membrane Proteins edited by Ute Hellmich, Rupak Doshi and Benjamin McIlwain.     

Using a SMALP platform to determine a sub-nm single particle cryo-EM membrane protein structure

The field of membrane protein structural biology has been revolutionized over the last few years with a number of high profile structures being solved using cryo-EM including Piezo, Ryanodine receptor, TRPV1 and the Glutamate receptor. Further developments in the EM field hold the promise of even greater progress in terms of greater resolution, which for membrane proteins is still typically within the 4–7 Å range. One advantage of a cryo-EM approach is the ability to study membrane proteins in more “native” like environments for example proteoliposomes, amphipols and nanodiscs. Recently, styrene maleic acid co-polymers (SMA) have been used to extract membrane proteins surrounded by native lipids (SMALPs) maintaining a more natural environment. We report here the structure of the Escherichia coli multidrug efflux transporter AcrB in a SMALP scaffold to sub-nm resolution, with the resulting map being consistent with high resolution crystal structures and other EM derived maps. However, both the C-terminal helix (TM12) and TM7 are poorly defined in the map. These helices are at the exterior of the helical bundle and form the greater interaction with the native lipids and SMA polymer and may represent a more dynamic region of the protein. This work shows the promise of using an SMA approach for single particle cryo-EM studies to provide sub-nm structures.     

Styrene-maleic acid copolymer effects on the function of the GPCR rhodopsin in lipid nanoparticles

Styrene-maleic acid (SMA) copolymers solubilize biological membranes to form lipid nanoparticles (SMALPs) that contain membrane proteins surrounded by native lipids, thus enabling the use of a variety of biophysical techniques for structural and functional studies. The question of whether SMALPs provide a truly natural environment or SMA solubilization affects the functional properties of membrane proteins, however, remains open. We address this question by comparing the photoactivation kinetics of rhodopsin, a G-protein-coupled receptor in the disk membranes of rod cells, in native membrane and SMALPs prepared at different molar ratios between SMA(3:1) and rhodopsin. Time-resolved absorption spectroscopy combined with complex kinetic analysis reveals kinetic and mechanistic differences between the native membrane and SMA-stabilized environment. The results suggest a range of molar ratios for nanoparticles suitable for kinetic studies.     

Membrane protein extraction and purification using partially-esterified SMA polymers

Styrene maleic acid (SMA) polymers have proven to be very successful for the extraction of membrane proteins, forming SMA lipid particles (SMALPs), which maintain a lipid bilayer around the membrane protein. SMALP-encapsulated membrane proteins can be used for functional and structural studies. The SMALP approach allows retention of important protein-annular lipid interactions, exerts lateral pressure, and offers greater stability than traditional detergent solubilisation. However, SMA polymer does have some limitations, including a sensitivity to divalent cations and low pH, an absorbance spectrum that overlaps with many proteins, and possible restrictions on protein conformational change. Various modified polymers have been developed to try to overcome these challenges, but no clear solution has been found. A series of partially-esterified variants of SMA (SMA 2625, SMA 1440 and SMA 17352) has previously been shown to be highly effective for solubilisation of plant and cyanobacterial thylakoid membranes. It was hypothesised that the partial esterification of maleic acid groups would increase tolerance to divalent cations. Therefore, these partially-esterified polymers were tested for the solubilisation of lipids and membrane proteins, and their tolerance to magnesium ions. It was found that all partially esterified polymers were capable of solubilising and purifying a range of membrane proteins, but the yield of protein was lower with SMA 1440, and the degree of purity was lower for both SMA 1440 and SMA 17352. SMA 2625 performed comparably to SMA 2000. SMA 1440 also showed an increased sensitivity to divalent cations. Thus, it appears the interactions between SMA and divalent cations are more complex than proposed and require further investigation.     

Molecular Model for the Solubilization of Membranes into Nanodisks by Styrene Maleic Acid Copolymers

A recent discovery in membrane research is the ability of styrene-maleic acid (SMA) copolymers to solubilize membranes in the form of nanodisks allowing extraction and purification of membrane proteins from their native environment in a single detergent-free step. This has important implications for membrane research because it allows isolation as well as characterization of proteins and lipids in a near-native environment. Here, we aimed to unravel the molecular mode of action of SMA copolymers by performing systematic studies using model membranes of varying compositions and employing complementary biophysical approaches. We found that the SMA copolymer is a highly efficient membrane-solubilizing agent and that lipid bilayer properties such as fluidity, thickness, lateral pressure profile, and charge density all play distinct roles in the kinetics of solubilization. More specifically, relatively thin membranes, decreased lateral chain pressure, low charge density at the membrane surface, and increased salt concentration promote the speed and yield of vesicle solubilization. Experiments using a native membrane lipid extract showed that the SMA copolymer does not discriminate between different lipids and thus retains the native lipid composition in the solubilized particles. A model is proposed for the mode of action of SMA copolymers in which membrane solubilization is mainly driven by the hydrophobic effect and is further favored by physical properties of the polymer such as its relatively small cross-sectional area and rigid pendant groups. These results may be helpful for development of novel applications for this new type of solubilizing agent, and for optimization of the SMA technology for solubilization of the wide variety of cell membranes found in nature.     

Nano-scale resolution of native retinal rod disk membranes reveals differences in lipid composition

Photoreceptors rely on distinct membrane compartments to support their specialized function. Unlike protein localization, identification of critical differences in membrane content has not yet been expanded to lipids, due to the difficulty of isolating domain-specific samples. We have overcome this by using SMA to coimmunopurify membrane proteins and their native lipids from two regions of photoreceptor ROS disks. Each sample''s copurified lipids were subjected to untargeted lipidomic and fatty acid analysis. Extensive differences between center (rhodopsin) and rim (ABCA4 and PRPH2/ROM1) samples included a lower PC to PE ratio and increased LC- and VLC-PUFAs in the center relative to the rim region, which was enriched in shorter, saturated FAs. The comparatively few differences between the two rim samples likely reflect specific protein–lipid interactions. High-resolution profiling of the ROS disk lipid composition gives new insights into how intricate membrane structure and protein activity are balanced within the ROS, and provides a model for future studies of other complex cellular structures.     

Template-assembled melittin: structural and functional characterization of a designed, synthetic channel-forming protein.

Template-assembled proteins (TASPs) comprising 4 peptide blocks, each of either the natural melittin sequence (melittin-TASP) or of a truncated melittin sequence (amino acids 6-26, melittin6-26-TASP), C-terminally linked to a (linear or cyclic) 10-amino acid template were synthesized and characterized, structurally by CD, by fluorescence spectroscopy, and by monolayer experiments, and functionally, by electrical conductance measurements on planar bilayers and release experiments on dye-loaded vesicles. Melittin-TASP and the truncated analogue preferentially adopt alpha-helical structures in methanol (56% and 52%, respectively) as in lipid membranes. Unlike in methanol, the melittin-TASP self-aggregates in water. On an air-water interface, the differently sized molecules can be self-assembled and compressed to a compact structure with a molecular area of around 600 A2, compatible with a 4-helix bundle preferentially oriented perpendicular to the interface. The proteins reveal a strong affinity for lipid membranes. A partition coefficient of 1.5 x 10(9) M-1 was evaluated from changes of the Trp fluorescence spectra of the TASP in water and in the lipid bilayer. In planar lipid bilayers, TASP molecules are able to form defined ion channels, exhibiting a small single-channel conductance of 7 pS (in 1 M NaCl). With increasing protein concentration in the lipid bilayer, additional, larger conductance states of up to 1 nS were observed. These states are likely to be formed by aggregated TASP structures as inferred from a strongly voltage-dependent channel activity on membranes of large area. In this respect, melittin-TASP reveals channel features of the native peptide, but with a considerably lower variation in the size of the channel states. Compared to the free peptide, template-assembled melittin has a much higher membrane activity: it is about 100 times more effective in channel formation and 20 times more effective in releasing dye molecules from lipid vesicles. This demonstrates that the lytic properties are not solely related to channel formation.     

Lipids and membrane protein structures

Membrane proteins do not work alone. The interaction of proteins with membrane lipids can be highly specific and is often important for full functional and structural integrity of the protein. Providing the appropriate lipid environment is of great importance for the purification and crystallisation of membrane proteins. The lipid content can be modulated by adjusting purification protocols or by adding back native or non-native lipids. Lipids can facilitate crystallisation by stabilising the protein and by providing lattice contacts. Of special interest is the crystallisation in lipidic cubic phase and with bicelles, as they appear to provide a membrane-like environment. These strategies have been instrumental for recent successful structure determinations of a human G-protein-coupled receptor, the beta(2)-adrenergic receptor. Lipid supplementation can also help to obtain membrane protein structures in a native conformation, as shown for voltage-gated potassium channels. Membrane protein structures, especially those derived from lipid-enriched preparations, contain bound lipid molecules. Specific protein-lipid interactions not only require careful evaluation and interpretation, but also permit a directed approach to elucidate the structural and/or functional role of these interactions.     

Correlation between acetylcholine receptor function and structural properties of membranes

Protein-lipid interactions were studied by using Torpedo californica acetylcholine receptor (AChR) as a model system by reconstituting purified AChR into membranes containing various synthetic lipids and native lipids. AChR function was determined by measuring two activities at 4 degrees C: (1) low to high agonist affinity-state transition of AChR in the presence of an agonist (carbamylcholine) in either membrane fragments or sealed vesicles and (2) ion-gating activity of AChR-containing vesicles in response to carbamylcholine. Sixteen samples were examined, each containing different lipid compositions including phosphatidylcholine, cholesterol, phosphatidic acid, phosphatidylethanolamine, asolectin, neutral lipid depleted asolectin, native lipids, and cholesterol-depleted native lipids. Phosphatidylcholines with different configurations of fatty acyl chains were used. The dynamic structures of these membranes were probed by incorporating spin-labeled fatty acid into AChR-containing vesicles and measuring the order parameters. It was found that both aspects of AChR function were highly dependent on the lipid environment even though carbamylcholine binding itself was not affected. An appropriate membrane fluidity was necessarily required to allow the interconversion between the low and high affinity states of AChR. An optimal fluidity hypothesis is proposed to account for the conformational transition properties of membrane proteins. In addition, the conformational change was only a necessary, but not sufficient, condition for the AChR-mediated ion flux activity. Among membranes in which AChR manifested the affinity-state transition, only those containing both cholesterol and negatively charged phospholipids (such as phosphatidic acid) retained the ion-gating activity.     

Functional integrity of membrane protein rhodopsin solubilized by styrene-maleic acid copolymer

Membrane proteins often require solubilization to study their structure or define the mechanisms underlying their function. In this study, the functional properties of the membrane protein rhodopsin in its native lipid environment were investigated after being solubilized with styrene-maleic acid (SMA) copolymer. The static absorption spectra of rhodopsin before and after the addition of SMA were recorded at room temperature to quantify the amount of membrane protein solubilized. The samples were then photobleached to analyze the functionality of rhodopsin upon solubilization. Samples with low or high SMA/rhodopsin ratios were compared to find a threshold in which the maximal amount of active rhodopsin was solubilized from membrane suspensions. Interestingly, whereas the highest SMA/rhodopsin ratios yielded the most solubilized rhodopsin, the rhodopsin produced under these conditions could not reach the active (Meta II) state upon photoactivation. The results confirm that SMA is a useful tool for membrane protein research, but SMA added in excess can interfere with the dynamics of protein activation.     

The use of SMALPs as a novel membrane protein scaffold for structure study by negative stain electron microscopy

Despite the great progress recently made in resolving their structures, investigation of the structural biology of membrane proteins still presents major challenges. Even with new technical advances such as lipidic cubic phase crystallisation, obtaining well-ordered crystals remains a significant hurdle in membrane protein X-ray crystallographic studies. As an alternative, electron microscopy has been shown to be capable of resolving > 3.5 Å resolution detail in membrane proteins of modest (~ 300 kDa) size, without the need for crystals. However, the conventional use of detergents for either approach presents several issues, including the possible effects on structure of removing the proteins from their natural membrane environment. As an alternative, it has recently been demonstrated that membrane proteins can be effectively isolated, in the absence of detergents, using a styrene maleic acid co-polymer (SMA). This approach yields SMA lipid particles (SMALPs) in which the membrane proteins are surrounded by a small disk of lipid bilayer encircled by polymer. Here we use the Escherichia coli secondary transporter AcrB as a model membrane protein to demonstrate how a SMALP scaffold can be used to visualise membrane proteins, embedded in a near-native lipid environment, by negative stain electron microscopy, yielding structures at a modest resolution in a short (days) timeframe. Moreover, we show that AcrB within a SMALP scaffold is significantly more active than the equivalent DDM stabilised form. The advantages of SMALP scaffolds within electron microscopy are discussed and we conclude that they may prove to be an important tool in studying membrane protein structure and function.     

Electron crystallography of biomolecules: mysterious membranes and missing cones

One of the major challenges facing structural biologists today is the determination of high-resolution 3D structures of membrane proteins. The requirement for detergent molecules to be present makes X-ray crystallography particularly difficult, coupled with the added problems of isolating sufficient (viable) protein samples at high enough concentrations to yield 3D crystals. One technique that enables structural determination with fewer constraints is electron crystallography of two-dimensional crystals, in which small amounts of membrane proteins can be studied in native form in lipid bilayers.     

毒素蛋白Colicin E1与磷脂膜的相互作用

多肽及蛋白质的插膜机制是目前分子生物学、细胞生物学研究中十分活跃的领域之一。本文通过荧光、圆二色等波谱学技术,深入地探讨了处于不同构象状态的毒素蛋白分子与磷脂膜作用后的构象变化。结果表明：带负电荷的磷脂膜对处于不同构象状态的ＣｏｌｉｃｉｎＥ１分子的二级结构有较强的诱导作用;这种作用是电荷依赖性的。处于不同构象状态的毒素蛋白分子在磷脂膜的诱导下均可不同程度恢复其天然状态下插膜时的构象。不同磷脂对ＣｏｌｉｃｉｎＥ１分子诱导的强弱依次为ＤＭＰＧ＞ＤＭＰＥ＞ＤＭＰＣ。ＣｏｌｉｃｉｎＥ１分子与磷脂膜的结合是紧密的,结合后的蛋白质有较强的抗变性能力。     

Thermodynamics,the structure of integral membrane proteins,and transport

Membranes are structures whose lipid and protein components are at, or close to, equilibrium in the plane of the membrane, but are not at equilibrium across the membrane. The thermodynamic tendency of ionic and highly polar molecules to be in contact with water rather than with nonpolar media (hydrophilic interactions) is important in determining these equilibrium and nonequilibrium states. In this paper, we speculate about the structures and orientations of integral proteins in a membrane, and about how the equilibrium and nonequilibrium features of such structures and orientations might be influenced by the special mechanisms of biosynthesis, processing, and membrane insertion of these proteins. The relevance of these speculations to the mechanisms of the translocation event in membrane transport is discussed, and specific protein models of transport that have been proposed are analyzed.     

Enantiomers of phospholipids and cholesterol: A key to decipher lipid-lipid interplay in membrane

Most phospholipids constituting biological membranes are chiral molecules with a hydrophilic head group and hydrophobic alkyl chains, rendering biphasic property characteristic of membrane lipids. Some lipids assemble into small domains via chirality-dependent homophilic and heterophilic interactions, the latter of which sometimes include cholesterol to form lipid rafts and other microdomains. On the other hand, lipid mediators and hormones derived from chiral lipids are recognized by specific membrane or nuclear receptors to induce downstream signaling. It is crucial to clarify the physicochemical properties of the lipid self-assembly for the study of the functions and behavior of biological membranes, which often become elusive due to effects of membrane proteins and other biological events. Three major lipids with different skeletal structures were discussed: sphingolipids including ceramides, phosphoglycerolipids, and cholesterol. The physicochemical properties of membranes and physiological functions of lipid enantiomers and diastereomers were described in comparison to natural lipids. When each enantiomer formed a self-assembly or interacted with achiral lipids, both lipid enantiomers exhibited identical membrane physicochemical properties, while when the enantiomer interacted with chiral lipids or with the opposite enantiomer, mixed membranes exhibited different properties. For example, racemic membranes comprising native sphingomyelin and its antipode exhibited phase segregation due to their strong homophilic interactions. Therefore, lipid enantiomers and diastereomers can be good probes to investigate stereospecific lipid-lipid and lipid-protein interactions occurring in biological membranes.     

Alternative membrane protein conformations in alcohols

Alcohols modulate the oligomerization of membrane proteins in lipid bilayers. This can occur indirectly by redistributing lateral membrane pressure in a manner which correlates with alcohol hydrophobicity. Here we investigate the direct impact of different alcohol-water mixtures on membrane protein stability and solubility, using the two detergent-solubilized alpha-helical membrane proteins DsbB and NhaA. Both proteins precipitate extensively at intermediate concentrations of alcohols, forming states with extensive (40-60%) beta-sheet structure and affinity for the fibril-specific dye thioflavin T, although atomic force microscopy images reveal layer-like and spherical deposits, possibly early stages in a fibrillation process trapped by strong hydrophobic contacts. At higher alcohol concentrations, both DsbB and NhaA are resolubilized and form non-native structures with increased (DsbB) or decreased (NhaA) helicity compared to the native state. The alternative conformational states cannot be returned to the functional native state upon dilution of alcohol. The efficiency of precipitation and the degree to which DsbB is destabilized at low alcohol concentrations show the same correlation with alcohol hydrophobicity. Thus, in addition to their effect on the membrane, alcohols perturb membrane proteins directly by solvating the hydrophobic regions of the protein. At intermediate concentrations, this perturbation exposes hydrophobic segments but does not provide sufficient solvation to avoid intermolecular association. Resolubilization requires a reduction in the relative dielectric constant below 65 in conjunction with specific properties of the individual alcohols. We conclude that alcohols provide access to a diversity of conformations for membrane proteins but are not a priori suitable for solution studies requiring reversible denaturation of monomeric proteins.     

THE ATOMIC FORCE MICROSCOPE DETECTS ATP-SENSITIVE PROTEIN CLUSTERS IN THE PLASMA MEMBRANE OF TRANSFORMED MDCK CELLS

Plasma membrane proteins are supposed to form clusters that allow ‘functional cross-talk’ between individual molecules within nanometre distance. However, such hypothetical protein clusters have not yet been shown directly in native plasma membranes. Therefore, we developed a technique to get access to the inner face of the plasma membrane of cultured transformed kidney (MDCK) cells. The authors applied atomic force microscopy (AFM) to visualize clusters of native proteins protruding from the cytoplasmic membrane surface. We used the K⁺channel blocker iberiotoxin (IBTX), a positively charged toxin molecule, that binds with high affinity to plasma membrane potassium channels and to atomically flat mica. Thus, apical plasma membranes could be ‘glued’ with IBTX to the mica surface with the cytosolic side of the membrane accessible to the scanning AFM tip. The topography of these native inside-out membrane patches was imaged with AFM in electrolyte solution mimicking the cytosol. The plasma membrane could be clearly identified as a lipid bilayer with the characteristic height of 4.9±0.02nm. Multiple proteins protruded from the lipid bilayer into the cytosolic space with molecule heights between 1 and 20nm. Large protrusions were most likely protein clusters. Addition of the proteolytic enzyme pronase to the bath solution led to the disappearance of the proteins within minutes. The metabolic substrate ATP induced a shape-change of the protein clusters and smaller subunits became visible. ADP or the non-hydrolysable ATP analogue, ATP-γ-S, could not exert similar effects. It is concluded that plasma membrane proteins (and/or membrane associated proteins) form ‘functional clusters’ in their native environment. The ‘physiological’ arrangement of the protein molecules within a cluster requires ATP.     

HAMLET forms annular oligomers when deposited with phospholipid monolayers

Recently, the anticancer activity of human α-lactalbumin made lethal to tumor cells (HAMLET) has been linked to its increased membrane affinity in vitro, at neutral pH, and ability to cause leakage relative to the inactive native bovine α-lactalbumin (BLA) protein. In this study, atomic force microscopy resolved membrane distortions and annular oligomers (AOs) produced by HAMLET when deposited at neutral pH on mica together with a negatively charged lipid monolayer. BLA, BAMLET (HAMLET's bovine counterpart) and membrane-binding Peptide C, corresponding to BLA residues 75-100, also form AO-like structures under these conditions but at higher subphase concentrations than HAMLET. The N-terminal Peptide A, which binds to membranes at acidic but not at neutral pH, did not form AOs. This suggests a correlation between the capacity of the proteins/peptides to integrate into the membrane at neutral pH-as observed by liposome content leakage and circular dichroism experiments-and the formation of AOs, albeit at higher concentrations. Formation of AOs, which might be important to HAMLET's tumor toxic action, appears related to the increased tendency of the protein to populate intermediately folded states compared to the native protein, the formation of which is promoted by, but not uniquely dependent on, the oleic acid molecules associated with HAMLET.     

Lipid-protein interactions in biological membranes: a structural perspective

Lipid molecules bound to membrane proteins are resolved in some high-resolution structures of membrane proteins. An analysis of these structures provides a framework within which to analyse the nature of lipid-protein interactions within membranes. Membrane proteins are surrounded by a shell or annulus of lipid molecules, equivalent to the solvent layer surrounding a water-soluble protein. The lipid bilayer extends right up to the membrane protein, with a uniform thickness around the protein. The surface of a membrane protein contains many shallow grooves and protrusions to which the fatty acyl chains of the surrounding lipids conform to provide tight packing into the membrane. An individual lipid molecule will remain in the annular shell around a protein for only a short period of time. Binding to the annular shell shows relatively little structural specificity. As well as the annular lipid, there is evidence for other lipid molecules bound between the transmembrane alpha-helices of the protein; these lipids are referred to as non-annular lipids. The average thickness of the hydrophobic domain of a membrane protein is about 29 A, with a few proteins having significantly smaller or greater thicknesses than the average. Hydrophobic mismatch between a membrane protein and the surrounding lipid bilayer generally leads to only small changes in membrane thickness. Possible adaptations in the protein to minimise mismatch include tilting of the helices and rotation of side chains at the ends of the helices. Packing of transmembrane alpha-helices is dependent on the chain length of the surrounding phospholipids. The function of membrane proteins is dependent on the thickness of the surrounding lipid bilayer, sometimes on the presence of specific, usually anionic, phospholipids, and sometimes on the phase of the phospholipid.