Interaction between ion channel-inactivating peptides and anionic phospholipid vesicles as model targets.

Studies of rapid (N-type) inactivation induced by different synthetic inactivating peptides in several voltage-dependent cation channels have concluded that the channel inactivation "entrance" (or "receptor" site for the inactivating peptide) consists of a hydrophobic vestibule within the internal mouth of the channel, separated from the cytoplasm by a region with a negative surface potential. These protein domains are conformed from alternative sequences in the different channels and thus are relatively unrestricted in terms of primary structure. We are reporting here on the interaction between the inactivating peptide of the Shaker B K+ channel (ShB peptide) or the noninactivating ShB-L7E mutant with anionic phospholipid vesicles, a model target that, as the channel's inactivation "entrance," contains a hydrophobic domain (the vesicle bilayer) separated from the aqueous media by a negatively charged vesicle surface. When challenged by the anionic phospholipid vesicles, the inactivating ShB peptide 1) binds to the vesicle surface with a relatively high affinity, 2) readily adopts a strongly hydrogen-bonded beta-structure, likely an intramolecular beta "hairpin," and 3) becomes inserted into the hydrophobic bilayer by its folded N-terminal portion, leaving its positively charged C-terminal end exposed to the extravesicular aqueous medium. Similar experiments carried out with the noninactivating, L7E-ShB mutant peptide show that this peptide 1) binds also to the anionic vesicles, although with a lower affinity than does the ShB peptide, 2) adopts only occasionally the characteristic beta-structure, and 3) has completely lost the ability to traverse the anionic interphase at the vesicle surface and to insert into the hydrophobic vesicle bilayer. Because the negatively charged surface and the hydrophobic domains in the model target may partly imitate those conformed at the inactivation "entrance" of the channel proteins, we propose that channel inactivation likely includes molecular events similar to those observed in the interaction of the ShB peptide with the phospholipid vesicles, i.e., binding of the peptide to the region of negative surface potential, folding of the bound peptide as a beta-structure, and its insertion into the channel's hydrophobic vestibule. Likewise, we relate the lack of channel inactivation seen with the mutant ShB-L7E peptide to the lack of ability shown by this peptide to cross through the anionic interphase and insert into the hydrophobic domains of the model vesicle target.     

Probing the channel-bound shaker B inactivating peptide by stereoisomeric substitution at a strategic tyrosine residue

A synthetic peptide patterned after the sequence of the inactivating ball domain of the Shaker B K(+) channel, the ShB peptide, fully restores fast inactivation in the deletion Shaker BDelta6-46 K(+) channel, which lacks the constitutive ball domains. On the contrary, a similar peptide in which tyrosine 8 is substituted by the secondary structure-disrupting d-tyrosine stereoisomer does not. This suggests that the stereoisomeric substitution prevents the peptide from adopting a structured conformation when bound to the channel during inactivation. Moreover, characteristic in vitro features of the wild-type ShB peptide such as the marked propensity to adopt an intramolecular beta-hairpin structure when challenged by anionic phospholipid vesicles, a model target mimicking features of the inactivation site in the channel protein, or to insert into their hydrophobic bilayers, are lost in the d-tyrosine-containing peptide, whose behavior is practically identical to that of noninactivating peptide mutants. In the absence of high resolution crystallographic data on the inactivated channel/peptide complex, these latter findings suggest that the structured conformation required for the peptide to promote channel inactivation, as referred to above, is likely to be beta-hairpin.     

Intrinsic tyrosine fluorescence as a tool to study the interaction of the shaker B "ball" peptide with anionic membranes

Steady-state and time-resolved fluorescence from the single tyrosine in the inactivating peptide of the Shaker B potassium channel (ShB peptide) and in a noninactivating peptide mutant, ShB-L7E, has been used to characterize their interaction with anionic phospholipid membranes, a model target mimicking features of the inactivation site on the channel protein. Partition coefficients derived from steady-state anisotropy indicate that both peptides show a high affinity for anionic vesicles, being higher in ShB than in ShB-L7E. Moreover, differential quenching by lipophilic spin-labeled probes and fluorescence energy transfer using trans-parinaric acid as the acceptor confirm that the ShB peptide inserts deep into the membrane, while the ShB-L7E peptide remains near the membrane surface. The rotational mobility of tyrosine in membrane-embedded ShB, examined from the decay of fluorescence anisotropy, can be described by two different rotational correlation times and a residual constant value. The short correlation time corresponds to fast rotation reporting on local tyrosine mobility. The long rotational correlation time and the high residual anisotropy suggest that the ShB peptide diffuses in a viscous and anisotropic medium compatible with the aliphatic region of a lipid bilayer and support the hypothesis that the peptide inserts into it as a monomer, to configure an intramolecular beta-hairpin structure. Assuming that this hairpin structure behaves like a rigid body, we have estimated its dimensions and rotational dynamics, and a model for the peptide inserted into the bilayer has been proposed.     

Tyrosine phosphorylation of the inactivating peptide of the shaker B potassium channel: a structural-functional correlate

A synthetic peptide patterned after the sequence of the inactivating "ball" domain of the Shaker B K(+) channel restores fast (N-type) inactivation in mutant deletion channels lacking their constitutive ball domains, as well as in K(+) channels that do not normally inactivate. We now report on the effect of phosphorylation at a single tyrosine in position 8 of the inactivating peptide both on its ability to restore fast channel inactivation in deletion mutant channels and on the conformation adopted by the phosphorylated peptide when challenged by anionic lipid vesicles, a model target mimicking features of the inactivation site in the channel protein. We find that the inactivating peptide phosphorylated at Y8 behaves functionally as well as structurally as the noninactivating mutant carrying the mutation L7E. Moreover, it is observed that the inactivating peptide can be phosphorylated by the Src tyrosine kinase either as a free peptide in solution or when forming part of the membrane-bound protein channel as the constitutive inactivating domain. These findings suggest that tyrosine phosphorylation-dephosphorylation of this inactivating ball domain could be of physiological relevance to rapidly interconvert fast-inactivating channels into delayed rectifiers and vice versa.     

N-type inactivation of the potassium channel KcsA by the Shaker B "ball" peptide: mapping the inactivating peptide-binding epitope

The effects of the inactivating peptide from the eukaryotic Shaker BK(+) channel (the ShB peptide) on the prokaryotic KcsA channel have been studied using patch clamp methods. The data show that the peptide induces rapid, N-type inactivation in KcsA through a process that includes functional uncoupling of channel gating. We have also employed saturation transfer difference (STD) NMR methods to map the molecular interactions between the inactivating peptide and its channel target. The results indicate that binding of the ShB peptide to KcsA involves the ortho and meta protons of Tyr(8), which exhibit the strongest STD effects; the C4H in the imidazole ring of His(16); the methyl protons of Val(4), Leu(7), and Leu(10) and the side chain amine protons of one, if not both, the Lys(18) and Lys(19) residues. When a noninactivating ShB-L7E mutant is used in the studies, binding to KcsA is still observed but involves different amino acids. Thus, the strongest STD effects are now seen on the methyl protons of Val(4) and Leu(10), whereas His(16) seems similarly affected as before. Conversely, STD effects on Tyr(8) are strongly diminished, and those on Lys(18) and/or Lys(19) are abolished. Additionally, Fourier transform infrared spectroscopy of KcsA in presence of (13)C-labeled peptide derivatives suggests that the ShB peptide, but not the ShB-L7E mutant, adopts a beta-hairpin structure when bound to the KcsA channel. Indeed, docking such a beta-hairpin structure into an open pore model for K(+) channels to simulate the inactivating peptide/channel complex predicts interactions well in agreement with the experimental observations.     

Energetics of Shaker K channels block by inactivation peptides

A synthetic peptide of the NH2-terminal inactivation domain of the ShB channel blocks Shaker channels which have an NH2-terminal deletion and mimics many of the characteristics of the intramolecular inactivation reaction. To investigate the role of electrostatic interactions in both peptide block and the inactivation process we measured the kinetics of block of macroscopic currents recorded from the intact ShB channel, and from ShB delta 6-46 channels in the presence of peptides, at different ionic strengths. The rate of inactivation and the association rate constants (k(on)) for the ShB peptides decreased with increasing ionic strength. k(on) for a more positively charged peptide was more steeply dependent on ionic strength consistent with a simple electrostatic mechanism of enhanced diffusion. This suggests that a rate limiting step in the inactivation process is the diffusion of the NH2-terminal domain towards the pore. The dissociation rates (k(off)) were insensitive to ionic strength. The temperature dependence of k(on) for the ShB peptide was very high, (Q10 = 5.0 +/- 0.58), whereas k(off) was relatively temperature insensitive (Q10 approximately 1.1). The results suggest that at higher temperatures the proportion of time either the peptide or channel spends in the correct conformation for binding is increased. There were two components to the time course of recovery from block by the ShB peptide, indicating two distinct blocked states, one of which has similar kinetics and dependence on external K+ concentration as the inactivated state of ShB. The other is voltage- dependent and at -120 mV is very unstable. Increasing the net charge on the peptide did not increase sensitivity to knock-off by external K+. We propose that the free peptide, having fewer constraints than the tethered NH2-terminal domain binds to a similar site on the channel in at least two different conformations.     

Interactions of amino terminal domains of Shaker K channels with a pore blocking site studied with synthetic peptides

Synthetic peptides of the five alternative NH2-terminal sequences of Shaker when applied to the cytoplasmic side of ShB channels that have an NH2-terminal deletion (ShB delta 6-46) block the channel with potencies correlated with the rate of inactivation in the corresponding variant. These peptides share no sequence similarity and yet three out of the five have apparent dissociation constants between 2 and 15 microM, suggesting that the specificity requirements for binding are low. To identify the primary structural determinants required for effective block of ShB delta 6-46, we examined the effects of substitutions made to the 20 residue ShB peptide on association and dissociation rates. Nonpolar residues within the peptide appear to be important in stabilizing the binding through hydrophobic interactions. Substitutions to leucine-7 showed there was a clear correlation between hydrophobicity and the dissociation rate constant (koff) with little effect on the association rate constant (kon). Substituting charged residues for hydrophobic residues within the region 4-8 disrupted binding. Within the COOH-terminal half of the peptide, substitutions that increased the net positive charge increased kon with relatively small changes in koff, suggesting the involvement of long-range electrostatic interactions in increasing the effective concentration of the peptide. Neutralizing charged residues produced small changes in koff. Charges within the region 12-20 act equivalently; alterations which conserved net charge produced little effect on either kon or koff. The results are consistent with this region of the peptide having an extended conformation and suggest that when bound this region makes few contacts with the channel protein and remains relatively unconstrained. Analogous mutations within the NH2-terminal domain of the intact ShB channel produced qualitatively similar effects on blocking and unblocking rates.     

A peptide derived from the Shaker B K+ channel produces short and long blocks of reconstituted Ca(2+)-dependent K+ channels.

A 20 amino acid synthetic peptide, corresponding to the amino-terminal region of the Shaker B (ShB) K+ channel and responsible for its fast inactivation, can block large conductance Ca(2+)-dependent K+ channels from rat brain and muscle. The ShB inactivation peptide produces two kinetically distinct blocking events in these channels. At lower concentrations, it produces short blocks, and at higher concentrations long-lived blocks also appear. The L7E mutant peptide produces only infrequent short blocks (no long-lived blocks) at a much higher concentration. Internal tetraethylammonium competes with the peptide for the short block, which is also relieved by K+ influx. These results suggest that the peptide induces the short block by binding within the pore of Ca(2+)-dependent K+ channels. The long block is not affected by increased K+ influx, indicating that the binding site mediating this block may be different from that involved in the short block. The short block of Ca(2+)-dependent K+ channels and the inactivation of Shaker exhibit similar characteristics with respect to blocking affinity and open pore blockade. This suggests a conserved binding region for the peptide in the pore regions of these very different classes of K+ channel.     

Multiple structural domains contribute to voltage-dependent inactivation of rat brain alpha(1E) calcium channels.

We have investigated the molecular determinants that mediate the differences in voltage-dependent inactivation properties between rapidly inactivating (R-type) alpha(1E) and noninactivating (L-type) alpha(1C) calcium channels. When coexpressed in human embryonic kidney cells with ancillary beta(1b) and alpha(2)-delta subunits, the wild type channels exhibit dramatically different inactivation properties; the half-inactivation potential of alpha(1E) is 45 mV more negative than that observed with alpha(1C), and during a 150-ms test depolarization, alpha(1E) undergoes 65% inactivation compared with only about 15% for alpha(1C). To define the structural determinants that govern these intrinsic differences, we have created a series of chimeric calcium channel alpha(1) subunits that combine the major structural domains of the two wild type channels, and we investigated their voltage-dependent inactivation properties. Each of the four transmembrane domains significantly affected the half-inactivation potential, with domains II and III being most critical. In particular, substitution of alpha(1C) sequence in domains II or III with that of alpha(1E) resulted in 25-mV negative shifts in half-inactivation potential. Similarly, the differences in inactivation rate were predominantly governed by transmembrane domains II and III and to some extent by domain IV. Thus, voltage-dependent inactivation of alpha(1E) channels is a complex process that involves multiple structural domains and possibly a global conformational change in the channel protein.     

Probing the origins of increased activity of the E22Q "Dutch" mutant Alzheimer's beta-amyloid peptide.

The amyloid peptide congener A beta(10--35)-NH(2) is simulated in an aqueous environment in both the wild type (WT) and E22Q "Dutch" mutant forms. The origin of the noted increase in deposition activity resulting from the Dutch mutation is investigated. Multiple nanosecond time scale molecular dynamics trajectories were performed and analyzed using a variety of measures of the peptide's average structure, hydration, conformational fluctuations, and dynamics. The results of the study support the conclusions that 1) the E22Q mutant and WT peptide are both stable in "collapsed coil" conformations consistent with the WT structure of, J. Struct. Biol. 130:130--141); 2) the E22Q peptide is more flexible in solution, supporting early claims that its equilibrium structural fluctuations are larger than those of the WT peptide; and 3) the local E22Q mutation leads to a change in the first solvation layer in the region of the peptide's "hydrophobic patch," resulting in a more hydrophobic solvation of the mutant peptide. The simulation results support the view that the noted increase in activity due to the Dutch mutation results from an enhancement of the desolvation process that is an essential step in the aggregation of the peptide.     

Molecular mechanism of calcium channel block by isradipine. Role of a drug-induced inactivated channel conformation

The role of the inactivated channel conformation in the molecular mechanism of Ca(2+) channel block by the 1,4-dihydropyridine (DHP) (+)-isradipine was analyzed in L-type channel constructs (alpha(1Lc); Berjukow, S., Gapp, F., Aczel, S., Sinnegger, M. J., Mitterdorfer, J., Glossmann, H., and Hering, S. (1999) J. Biol. Chem. 274, 6154-6160) and a DHP-sensitive class A Ca(2+) channel mutant (alpha(1A-DHP); Sinnegger, M. J., Wang, Z., Grabner, M., Hering, S., Striessnig, J., Glossmann, H., and Mitterdorfer, J. (1997) J. Biol. Chem. 272, 27686-27693) carrying the high affinity determinants of the DHP receptor site but inactivating at different rates. Ca(2+) channel inactivation was modulated by coexpressing the alpha(1A-DHP)- or alpha(1Lc)-subunits in Xenopus oocytes with either the beta(2a)- or the beta(1a)-subunit and amino acid substitutions in L-type segment IVS6 (I1497A, I1498A, and V1504A). Contrary to a modulated receptor mechanism assuming high affinity DHP binding to the inactivated state we observed no clear correlation between steady state inactivation and Ca(2+) channel block by (+)-isradipine: (i) a 3-fold larger fraction of alpha(1A-DHP)/beta(1a) channels in steady state inactivation at -80 mV (compared with alpha(1A-DHP)/beta(2a)) did not enhance the block by (+)-isradipine; (ii) different steady state inactivation of alpha(1Lc) mutants at -30 mV did not correlate with voltage-dependent channel block; and (iii) the midpoint-voltages of the inactivation curves of slowly inactivating L-type constructs and more rapidly inactivating alpha(1Lc)/beta(1a) channels were shifted to a comparable extent to more hyperpolarized voltages. A kinetic analysis of (+)-isradipine interaction with different L-type channel constructs revealed a drug-induced inactivated state. Entry and recovery from drug-induced inactivation are modulated by intrinsic inactivation determinants, suggesting a synergism between intrinsic inactivation and DHP block.     

The key-role of tyrosine 155 in the mechanism of prion transconformation as highlighted by a study of sheep mutant peptides

Prion protein is a strongly conserved and ubiquitous glycoprotein. The conformational conversion of the non-pathogenic cellular prion isoform (PrP(C)) into a pathogenic scrapie isoform (PrP(Sc)) is a fundamental event in the onset of transmissible spongiform encephalopathies (TSE). During this conversion, helix H1 and its two flanking loops are known to undergo a conformational transition into a beta-like structure. In order to understand mechanisms which trigger this transconformation, sheep prion protein synthetic peptides spanning helix 1 and beta-strand 2 (residues 142-166) were studied: (1) the N3 peptide, studied earlier, is known to fold into beta-hairpin-like conformation in phosphate buffer at neutral pH and to adopt a helix H1 conformation when dissolved in trifluoroethanol/phosphate buffer mixture, (2) The R156A mutant (peptide R15) and (3) the Y155A mutant (peptide Y14) of the N3 peptide are studied by circular dichroism and NMR spectroscopy in this article. Structural characterization of these peptides highlights the key role of tyrosine 155 in the stabilization of the beta-hairpin-like conformation of the sheep peptide in phosphate buffer. We propose a model where tyrosine 155 could stabilize the beta-hairpin structure by creating a hydrophobic core in phosphate buffer, necessary to initiate the beta-type structure formation. In the turn, the side chain ionic interaction, E152-R156 described before, seems to play a minor role relative to the hydrophobic packing, as observed with the R156A mutation (peptide R15). Interestingly, homology at amino acid residue 155 could be responsible for the species barrier in TSE.     

Design and characterization of anchoring amphiphilic peptides and their interactions with lipid vesicles.

In an effort to develop a polymer/peptide assembly for the immobilization of lipid vesicles, we have made and characterized four water-soluble amphiphilic peptides designed to associate spontaneously and strongly with lipid vesicles without causing significant leakage from anchored vesicles. These peptides have a primary amphiphilic structure with the following sequences: AAAAAAAAAAAAWKKKKKK, AALLLAAAAAAAAAAAAAAAAAAAWKKKKKK, and KKAALLLAAAAAAAAAAAAAAAAAAAWKKKKKK and its reversed homologue KKKKKKWAAAAA AAAAAAAAAAAAAALLLAAKK. Two of the four peptides have their hydrophobic segments capped at both termini with basic residues to stabilize the transmembrane orientation and to increase the affinity for negatively charged vesicles. We have studied the secondary structure and the membrane affinity of the peptides as well as the effect of the different peptides on the membrane permeability. The influence of the hydrophobic length and the role of lysine residues were clearly established. First, a hydrophobic segment of 24 amino acids, corresponding approximately to the thickness of a lipid bilayer, improves considerably the affinity to zwitterionic lipids compared to the shorter one of 12 amino acids. The shorter peptide has a low membrane affinity since it may not be long enough to adopt a stable conformation. Second, the presence of lysine residues is essential since the binding is dominated by electrostatic interactions, as illustrated by the enhanced binding with anionic lipids. The charges at both ends, however, prevent the peptide from inserting spontaneously in the bilayer since it would involve the translocation of a charged end through the apolar core of the bilayer. The direction of the amino acid sequence of the peptide has no significant influence on its behavior. None of these peptides perturbs membrane permeability even at an incubation lipid to peptide molar ratio of 0.5. Among the four peptides, AALLLAAAAAAAAAAAAAAAAAAAWKKKKKK is identified as the most suitable anchor for the immobilization of lipid vesicles.     

Inactivating BK channels in rat chromaffin cells may arise from heteromultimeric assembly of distinct inactivation-competent and noninactivating subunits.

Inactivating and noninactivating variants of large-conductance, Ca2+-dependent, voltage-dependent BK-type channels are found in rat chromaffin cells and are largely segregated into different cells. Here we test the hypothesis that, within the population of cells that express inactivating BK current (BKi current), the BKi channels are largely heteromultimers composed of inactivation-competent subunits (bk(i)) and noninactivating subunits (bk(s)). Several independent types of evidence support this view. The gradual removal of inactivation by trypsin is consistent with the idea that in most cells and patches there are, on average, about two to three inactivation domains per channel. In addition, several aspects of blockade of BKi current by charybdotoxin (CTX) are consistent with the idea that BKi channels contain differing numbers (one to four) of relatively CTX-resistant bk(i) subunits. Finally, the frequency of occurrence of noninactivating BKs channels in patches with predominantly inactivating BKi channels is consistent with the binomial expectations of random, independent assembly of two distinct subunits, if most cells have, on average, about two to three bk(i) subunits per channel. These results suggest that the phenotypic properties of BKi currents and the resulting cellular electrical excitability may exhibit a continuum of behavior that arises simply from the differential expression of two distinct subunits.     

Bupivacaine blocks N-type inactivating Kv channels in the open state: no allosteric effect on inactivation kinetics

Local anesthetics bind to ion channels in a state-dependent manner. For noninactivating voltage-gated K channels the binding mainly occurs in the open state, while for voltage-gated inactivating Na channels it is assumed to occur mainly in inactivated states, leading to an allosterically caused increase in the inactivation probability, reflected in a negative shift of the steady-state inactivation curve, prolonged recovery from inactivation, and a frequency-dependent block. How local anesthetics bind to N-type inactivating K channels is less explored. In this study, we have compared bupivacaine effects on inactivating (Shaker and K_v3.4) and noninactivating (Shaker-IR and K_v3.2) channels, expressed in Xenopus oocytes. Bupivacaine was found to block these channels time-dependently without shifting the steady-state inactivation curve markedly, without a prolonged recovery from inactivation, and without a frequency-dependent block. An analysis, including computational testing of kinetic models, suggests binding to the channel mainly in the open state, with affinities close to those estimated for corresponding noninactivating channels (300 and 280 μM for Shaker and Shaker-IR, and 60 and 90 μM for K_v3.4 and K_v3.2). The similar magnitudes of K_d, as well as of blocking and unblocking rate constants for inactivating and noninactivating Shaker channels, most likely exclude allosteric interactions between the inactivation mechanism and the binding site. The relevance of these results for understanding the action of local anesthetics on Na channels is discussed.     

Interactions of tryptophan-rich cathelicidin antimicrobial peptides with model membranes studied by differential scanning calorimetry

The 13-residue cathelicidins indolicidin and tritrpticin are part of a group of relatively short tryptophan-rich antimicrobial peptides that hold potential as future substitutes for antibiotics. Differential scanning calorimetry (DSC) has been applied here to study the effect of indolicidin and tritrpticin as well as five tritrpticin analogs on the phase transition behaviour of model membranes made up of zwitterionic dimyristoylphosphatidylcholine (DMPC, DMPC/cholesterol) and anionic dimyristoylphosphatidyl glycerol (DMPG) phospholipids. Most of the peptides studied significantly modified the phase transition profile, suggesting the importance of hydrophobic forces for the peptide interactions with the lipid bilayers and their insertion into the bilayer. Indolicidin and tritrpticin are both known to be flexible in aqueous solution, but they adopt turn-turn structures when they bind to and insert in a membrane surface. Pro-to-Ala substitutions in tritrpticin, which result in the formation of a stable alpha-helix in this peptide, lead to a substantial increase in the peptide interactions with both zwitterionic and anionic phospholipid vesicles. In contrast, the substitution of the three Trp residues by Tyr or Phe resulted in a significant decrease of the peptide's interaction with anionic vesicles and virtually eliminated binding of these peptides to the zwitterionic vesicles. An increase of the cationic charge of the peptide induced much smaller changes to the peptide interaction with all lipid systems than substitution of particular amino acids or modification of the peptide conformation. The presence of multiple lipid domains with a non-uniform peptide distribution was noticed. Slow equilibration of the lipid-peptide systems due to peptide redistribution was observed in some cases. Generally good agreement between the present DSC data and peptide antimicrobial activity data was obtained.     

Interactions of tryptophan-rich cathelicidin antimicrobial peptides with model membranes studied by differential scanning calorimetry

The 13-residue cathelicidins indolicidin and tritrpticin are part of a group of relatively short tryptophan-rich antimicrobial peptides that hold potential as future substitutes for antibiotics. Differential scanning calorimetry (DSC) has been applied here to study the effect of indolicidin and tritrpticin as well as five tritrpticin analogs on the phase transition behaviour of model membranes made up of zwitterionic dimyristoylphosphatidylcholine (DMPC, DMPC/cholesterol) and anionic dimyristoylphosphatidyl glycerol (DMPG) phospholipids. Most of the peptides studied significantly modified the phase transition profile, suggesting the importance of hydrophobic forces for the peptide interactions with the lipid bilayers and their insertion into the bilayer. Indolicidin and tritrpticin are both known to be flexible in aqueous solution, but they adopt turn-turn structures when they bind to and insert in a membrane surface. Pro-to-Ala substitutions in tritrpticin, which result in the formation of a stable α-helix in this peptide, lead to a substantial increase in the peptide interactions with both zwitterionic and anionic phospholipid vesicles. In contrast, the substitution of the three Trp residues by Tyr or Phe resulted in a significant decrease of the peptide's interaction with anionic vesicles and virtually eliminated binding of these peptides to the zwitterionic vesicles. An increase of the cationic charge of the peptide induced much smaller changes to the peptide interaction with all lipid systems than substitution of particular amino acids or modification of the peptide conformation. The presence of multiple lipid domains with a non-uniform peptide distribution was noticed. Slow equilibration of the lipid-peptide systems due to peptide redistribution was observed in some cases. Generally good agreement between the present DSC data and peptide antimicrobial activity data was obtained.     

Modes of operation of the BKCa channel beta2 subunit

The beta(2) subunit of the large conductance Ca(2+)- and voltage-activated K(+) channel (BK(Ca)) modulates a number of channel functions, such as the apparent Ca(2+)/voltage sensitivity, pharmacological and kinetic properties of the channel. In addition, the N terminus of the beta(2) subunit acts as an inactivating particle that produces a relatively fast inactivation of the ionic conductance. Applying voltage clamp fluorometry to fluorescently labeled human BK(Ca) channels (hSlo), we have investigated the mechanisms of operation of the beta(2) subunit. We found that the leftward shift on the voltage axis of channel activation curves (G(V)) produced by coexpression with beta(2) subunits is associated with a shift in the same direction of the fluorescence vs. voltage curves (F(V)), which are reporting the voltage dependence of the main voltage-sensing region of hSlo (S4-transmembrane domain). In addition, we investigated the inactivating mechanism of the beta(2) subunits by comparing its properties with the ones of the typical N-type inactivation process of Shaker channel. While fluorescence recordings from the inactivated Shaker channels revealed the immobilization of the S4 segments in the active conformation, we did not observe a similar feature in BK(Ca) channels coexpressed with the beta(2) subunit. The experimental observations are consistent with the view that the beta(2) subunit of BK(Ca) channels facilitates channel activation by changing the voltage sensor equilibrium and that the beta(2)-induced inactivation process does not follow a typical N-type mechanism.     

pH-dependent membrane fusion and vesiculation of phospholipid large unilamellar vesicles induced by amphiphilic anionic and cationic peptides.

We studied fusion induced by a 20-amino acid peptide derived from the amino-terminal segment of hemagglutinin of influenza virus A/PR/8/34 [Murata, M., Sugahara, Y., Takahashi, S., & Ohnishi, S. (1987) J. Biochem. (Tokyo) 102, 957-962]. To extend the study, we have prepared several water-soluble amphiphilic peptides derived from the HA peptide; the anionic peptides D4, E5, and E5L contain four and five acidic residues and the cationic peptide K5 has five Lys residues in place of the five Glu residues in E5. Fusion of egg phosphatidylcholine large unilamellar vesicles induced by these peptides is assayed by two different fluorescence methods, lipid mixing and internal content mixing. Fusion is rapid in the initial stage (12-15% within 20 s) and remains nearly the same or slightly increasing afterward. The anionic peptides cause fusion at acidic pH lower than 6.0-6.5, and the cationic peptide causes fusion at alkaline pH higher than 9.0. Leakage and vesiculation of vesicles are also measured. These peptides are bound and associated with vesicles as shown by Ficoll discontinuous gradients and by the blue shift of tryptophan fluorescence. They take an alpha-helical structure in the presence of vesicles. They become more hydrophobic in the pH regions for fusion. When the suspension is made acidic or alkaline, the vesicles aggregate, as shown by the increase in light scattering. The fusion mechanism suggests that the amphiphilic peptides become more hydrophobic by neutralization due to protonation of the carboxyl groups or deprotonation of the lysyl amino groups, aggregate the vesicles together, and interact strongly with lipid bilayers to cause fusion. At higher peptide concentrations, E5 and E5L cause fusion transiently at acidic pH followed by vesiculation.     

Computational study of non-conductive selectivity filter conformations and C-type inactivation in a voltage-dependent potassium channel

C-type inactivation is a time-dependent process of great physiological significance that is observed in a large class of K⁺ channels. Experimental and computational studies of the pH-activated KcsA channel show that the functional C-type inactivated state, for this channel, is associated with a structural constriction of the selectivity filter at the level of the central glycine residue in the signature sequence, TTV(G)YGD. The structural constriction is allosterically promoted by the wide opening of the intracellular activation gate. However, whether this is a universal mechanism for C-type inactivation has not been established with certainty because similar constricted structures have not been observed for other K⁺ channels. Seeking to ascertain the general plausibility of the constricted filter conformation, molecular dynamics simulations of a homology model of the pore domain of the voltage-gated potassium channel Shaker were performed. Simulations performed with an open intracellular gate spontaneously resulted in a stable constricted-like filter conformation, providing a plausible nonconductive state responsible for C-type inactivation in the Shaker channel. While there are broad similarities with the constricted structure of KcsA, the hypothetical constricted-like conformation of Shaker also displays some subtle differences. Interestingly, those are recapitulated by the Shaker-like E71V KcsA mutant, suggesting that the residue at this position along the pore helix plays a pivotal role in determining the C-type inactivation behavior. Free energy landscape calculations show that the conductive-to-constricted transition in Shaker is allosterically controlled by the degree of opening of the intracellular activation gate, as observed with the KcsA channel. The behavior of the classic inactivating W434F Shaker mutant is also characterized from a 10-μs MD simulation, revealing that the selectivity filter spontaneously adopts a nonconductive conformation that is constricted at the level of the second glycine in the signature sequence, TTVGY(G)D.