Conjugal mobility of the multicopy plasmids NTP1 and NTP16

Mobilization of the multicopy plasmid NTP16, like that of ColE1, is promoted by a range of conjugal plasmids. However, the mechanisms employed for NTP16 mobilization differ between groups. Mobilization by the IncI1 plasmid R64 requires trans-acting products from NTP16 plus a cis-acting region of the small plasmid. In contrast, this system is used inefficiently by the F plasmid and instead, a high-frequency conduction process occurs. Analysis of exconjugant cells reveals that F-mediated mobilization of NTP16 frequently involves rearrangements of NTP16 DNA, promoted by the Tn1000 transposon of F and/or by the kanamycin resistance transposon (Tn4352) of NTP16. Possible mechanisms for the high-frequency F-mediated mobilization of NTP16 are discussed. The plasmid NTP1, which is closely related to NTP16, is also mobilized efficiently by R64. It is not however efficiently mobilized by F, demonstrating the requirement for the Tn4352 element, which is not present in this plasmid, for effective F-mediated transfer.     

Characterization of the drug resistance plasmid NTP16

A functional and physical analysis of the multicopy plasmid NTP16 is presented. The plasmid-encoded drug resistance determinants are located, as are regions encoding the origin of replication, incompatibility functions, copy number determinants, and mobility functions. It is demonstrated that NTP16 probably arose from the closely related plasmid NTP1 by the acquisition of a novel kanamycin resistance transposon, Tn4352, followed by deletion of some NTP1 sequences. The incompatibility behavior of NTP16 derivatives indicates a system of control rather more complex than that which operates in ColE1. In addition to the RNA I/primer RNA system, the production of a further trans-acting product is demonstrated and its site of action located. A series of derivative plasmids have been created which may prove useful as vectors for genetic engineering.     

Resident enhanced repair: novel repair process action on plasmid DNA transformed into Escherichia coli K-12.

The survival of UV-irradiated DNA of plasmid NTP16 was monitored after its transformation into recipient cells containing an essentially homologous undamaged plasmid, pLV9. The presence of pLV9 resulted in a substantial increase in the fraction of damaged NTP16 molecules which survived in the recipient cells. This enhanced survival requires the host uvrA+ and uvrB+ gene products, but not the host recA+ gene product. The requirement for both homologous DNA and the uvrA+ and uvrB+ gene products suggests that a novel repair process may act on plasmid DNA. Possible mechanisms for this process are considered.     

Repair in E. coli of transforming plasmid DNA damaged by psoralen plus near-ultraviolet irradiation

Treatment of DNA with psoralen plus near-ultraviolet irradiation gives rise to both monoadducts and cross-links. We have examined the repair of plasmid NTP16 DNA treated in this way in vitro and then used to transform E. coli. Monoadducts are found to be potentially lethal, and can be repaired by uvr-dependent and recA-dependent pathways. The presence of a related resident plasmid in the transformed cells can enhance the survival of the incoming damaged NTP16 DNA. This effect is not recA-dependent, and a similar effect (designated "resident enhanced repair") has been observed previously with UV-irradiated plasmids of this particular incompatibility group. Removal of unbound psoralen from the plasmid DNA and exposure to further NUV is known to increase the ratio of cross-links to monoadducts, and we demonstrate that such cross-linked plasmid DNA is not readily repaired following transformation. However in the presence of homologous DNA (related resident plasmid) there is evidence for the repair, and hence uptake by the cell, of cross-linked DNA.     

A pathway for the evolution of the plasmid NTP16 involving the novel kanamycin resistance transposon Tn4352

The kanamycin resistance determinant of the drug resistance plasmid NTP16 has been characterized by DNA sequencing and has been shown to possess all of the structural features of a transposable element. It is made up of a 1040-bp central region encoding a protein identical to the aminoglycoside 3'-phosphotransferase of Tn903, flanked by direct repeats of an element identical to IS26. This novel transposon has been designated Tn4352. Analysis of the host sequences flanking the transposon reveal that they are derived from a Tn3-like element, and contain no 8 base pair target size duplications which are normally created by the insertion of IS26-like elements. Comparison to the Tn3 sequence shows that the flanking sequences are noncontiguous within Tn3, with the clear implication that NTP16 has evolved from a similar plasmid encoding only ampicillin resistance (presumably NTP1) by the insertion of Tn4352 into the Tn3-like element, followed by a substantial deletion. The sequence analysis suggests that the initial insertion was into the tnpR gene of the ampicillin transposon, followed by a deletion extending to a specific site within tnpA.     

Characterisation of plasmids coding for the restriction endonuclease EcoRI

Summary The properties of two plasmids coding for the EcoRI restriction and modification enzymes are described. Both plasmids are non auto-transferring (NTP) but can be mobilised by transfer factors. Strains carrying NTP13 produce colicin E1 and the EcoRI enzymes. This plasmid has a molecular weight of 6x10⁶ daltons and is present as approximately 12 copies per chromosome. The second plasmid, NTP14, was detected after mobilisation of the EcoRI plasmid with the R factor R1–19. NTP14 codes for ampicillin resistance, synthesis of the EcoRI enzymes and colicin E1. The molecular weight of NTP14 is 10.7x10⁶ daltons and there are about 14 copies per chromosome. DNA-DNA reassociation experiments were performed to determine the interrelationships of NTP13, NTP14, ColE1 and the R factor R1–19. NTP13 and NTP14 continue to replicate when cellular protein synthesis is inhibited by the addition of chloramphenicol.     

Properties of wild-type strains of enterotoxigenic Escherichia coli which produce colonization factor antigen II, and belong to serogroups other than O6

Enterotoxigenic strains of Escherichia coli, which belonged to serogroups other than O6 and produced colonization factor antigen II, usually produced only coli surface antigen 3 (CS3) and gave weak mannose-resistant haemagglutination of bovine erythrocytes. A non-autotransferring plasmid, NTP165, from a strain of E. coli O168. H16 coded for heat-stable enterotoxin, heat-labile enterotoxin and CS antigens. The CS antigens expressed after acquisition of plasmid NTP165 depended on the recipient strain: a biotype A strain of serotype O6. H16 expressed CS1 and CS3; a biotype C strain of serotype O6. H16 expressed CS2 and CS3; strain K12 and strain E19446 of serotype O139. H28 expressed only CS3. An exceptional wild-type strain, E24377, of serotype O139. H28 produced CS1 and CS3 when isolated; a variant of E24377 which had lost the plasmid coding for CS antigens produced both CS1 and CS3 after the introduction of NTP165.     

Interaction between the RP4 coupling protein TraG and the pBHR1 mobilization protein Mob

It is currently believed that interaction between the relaxosome of a mobilizable plasmid and the transfer machinery of the helper conjugative plasmid is mediated by a TraG family coupling protein. The coupling proteins appear as an essential determinant of mobilization specificity and efficiency. Using a two-hybrid system, we demonstrated for the first time the direct in vivo interaction between the coupling protein of a conjugative plasmid (the TraG protein of RP4) and the relaxase of a mobilizable plasmid (the Mob protein of pBHR1, a derivative of the broad host range plasmid pBBR1). This interaction was confirmed in vitro by an overlay assay and was shown to occur even in the absence of the transfer origin of pBHR1. We showed that, among 11 conjugative plasmids tested, pBHR1 is efficiently mobilized only by plasmids encoding an IncP-type transfer system. We also showed that the RP4 TraG coupling protein is essential for mobilization of a pBBR1 derivative and is the element that allows its mobilization by R388 plasmid (IncW) at a detectable frequency.     

The mobilization and origin of transfer regions of a Thiobacillus ferrooxidans plasmid: relatedness to plasmids RSF1010 and pSC101

The components for the mobilization function of a plasmid DNA during conjugation include a cis-acting sequence (the origin of transfer, oriT) and a transacting sequence coding for mobilization (Mob) proteins. By genetic and deletion analysis, we have located the mobilization region of pTF1, a cryptic plasmid previously isolated from a Thiobacillus ferrooxidans strain. Within a 2797 bse-pair sequenced region, several open reading frames (ORFs) were predicted; two of the ORFs are divergently transcribed and they encode proteins of calculated molecular masses, 42.6kD (ORF2) and 11.4kD (ORF6). Surprisingly, these protein sequences are substantially similar to two of the previously characterized mobilization proteins of the Escherichia coli IncQ plasmid, RSF1010. Moreover, the pTF1 ORF2 (now designated MobL) sequence is also found to be similar to a presumed mobilization protein of plasmid pSC101. Regions of sequence identity of plasmids pTF1, RSF1010 and pSC101 include their oriT sites. By alkaline agarose gel electrophoresis and DNA sequencing, we have established the location of the relaxation complex nick site within the oriT of pTF1. An identical nick site, which is adjacent to a characteristic 10 base-pair inverted repeat sequence, is also found for plasmid RSF1010. A recombinant plasmid containing a 42 base-pair synthetic piece of DNA encompassing the pTF1 inverted repeat and nick sequence was shown to be oriT-active.     

Transformation of Escherichia coli with plasmid deoxyribonucleic acid: calcium-induced binding of deoxyribonucleic acid to whole cells and to isolated membrane fractions.

Plasmid deoxyribonucleic acid (DNA) was tightly bound to cells of Escherichia coli at 0 degrees C in the presence of divalent cations. During incubation at 42 degrees C, 0.1 to 1% of this DNA became resistant to deoxyribonuclease. Deoxyribonuclease-resistant DNA binding and the ability to produce transformants became saturated when transformation mixtures contained 1 to 2 micrograms of plasmid NTP16 DNA and about 5 X 10(8) viable cells. Under optimum conditions, between 1 and 2 molecule equivalents of 3H-labeled NTP16 DNA per viable cell became deoxyribonuclease resistant. Despite this, only 0.1 to 1% of viable cells became transformed by saturating amounts of the plasmid. The results suggest that transport of DNA across the inner membrane is a limiting step in transformation. After transformation the bulk of labeled plasmid DNA remained associated with outer membranes. However, in vitro assays indicated that plasmid DNA would bind equally well to preparations of inner or outer membranes provided divalent cations were present to preparations of inner or outer membranes provided divalent cations were present. Divalent cations promoted differing levels of binding to isolated inner and outer membranes in the order Ca2+ much greater than Ba2+ greater than Sr2+ greater than Mg2+. This parallels their relative efficiencies in promoting transformation. Binding of plasmid DNA was greatly reduced when outer membranes were treated with trypsin; this suggests that protein components may be required for the binding or transport of DNA (or both) during transformation.     

High-frequency conjugal transfer of a gonococcal penicillinase plasmid.

Gonococci containing a 24 X 10(6)-dalton conjugal plasmid were able to mobilize for transfer a smaller, non-self-transmissible penicillinase (Pcr) plasmid with high frequency under appropriate conditions. In some strains, over 10% of donor colony-forming units transferred the Pcr plasmid in a mating of less than 2 h, which suggests that the conjugal system was naturally derepressed. Colony-opacity variants containing different quantities of an approximately 28,000-dalton outer membrane protein were altered in their ability to act as conjugal donors and recipients. Maximal transfer of the Pcr plasmid was observed between transparent donors and recipients, lacking appreciable amounts of the 28,000-dalton protein. Under conditions of high-frequency Pcr plasmid mobilization, no conjugal mobilization of chromosomal markers could be discerned.     

A subassembly of R27-encoded transfer proteins is dependent on TrhC nucleoside triphosphate-binding motifs for function but not formation

The transfer of plasmid DNA molecules between bacterial cells is achieved by a large array of conjugative transfer proteins which assemble into both cytoplasmic and membrane-associated complexes. TrhC is a membrane-associated protein that is required for the transfer of the IncHI1 resistance plasmid R27. Homologous proteins are encoded in all known conjugative systems, and each contains characteristic nucleoside triphosphate (NTP)-binding domains. An assembly of R27-encoded proteins was previously visualized by use of a TrhC-green fluorescent protein fusion, which appeared as discrete membrane-associated fluorescent foci. We have utilized this experimental system to determine the requirements for assembly of this TrhC-associated protein complex, and we found that 12 of the other 18 R27 transfer proteins are required for focus formation. An individual focus possibly represents a subassembly comprised of some or all of these transfer proteins. These data support the notion that the transfer apparatus is a multicomponent structure. In contrast, substitutions and deletions within TrhC NTP-binding motifs had minor effects on focus formation, but these mutations did affect plasmid transfer and bacteriophage susceptibility. These results indicate that TrhC requires intact NTP-binding motifs to function during conjugative transfer but that these motifs are not essential for the assembly of TrhC into a complex with other transfer proteins.     

The Bacillus subtilis conjugative transposon ICEBs1 mobilizes plasmids lacking dedicated mobilization functions

Integrative and conjugative elements (ICEs, also known as conjugative transposons) are mobile elements that are found integrated in a host genome and can excise and transfer to recipient cells via conjugation. ICEs and conjugative plasmids are found in many bacteria and are important agents of horizontal gene transfer and microbial evolution. Conjugative elements are capable of self-transfer and also capable of mobilizing other DNA elements that are not able to self-transfer. Plasmids that can be mobilized by conjugative elements are generally thought to contain an origin of transfer (oriT), from which mobilization initiates, and to encode a mobilization protein (Mob, a relaxase) that nicks a site in oriT and covalently attaches to the DNA to be transferred. Plasmids that do not have both an oriT and a cognate mob are thought to be nonmobilizable. We found that Bacillus subtilis carrying the integrative and conjugative element ICEBs1 can transfer three different plasmids to recipient bacteria at high frequencies. Strikingly, these plasmids do not have dedicated mobilization-oriT functions. Plasmid mobilization required conjugation proteins of ICEBs1, including the putative coupling protein. In contrast, plasmid mobilization did not require the ICEBs1 conjugative relaxase or cotransfer of ICEBs1, indicating that the putative coupling protein likely interacts with the plasmid replicative relaxase and directly targets the plasmid DNA to the ICEBs1 conjugation apparatus. These results blur the current categorization of mobilizable and nonmobilizable plasmids and indicate that conjugative elements play a role in horizontal gene transfer even more significant than previously recognized.     

Analysis of the mobilization region of the broad-host-range IncQ-like plasmid pTC-F14 and its ability to interact with a related plasmid, pTF-FC2

Plasmid pTC-F14 is a 14.2-kb plasmid isolated from Acidithiobacillus caldus that has a replicon that is closely related to the promiscuous, broad-host-range IncQ family of plasmids. The region containing the mobilization genes was sequenced and encoded five Mob proteins that were related to those of the DNA processing (Dtr or Tra1) region of IncP plasmids rather than to the three-Mob-protein system of the IncQ group 1 plasmids (e.g., plasmid RSF1010 or R1162). Plasmid pTC-F14 is the second example of an IncQ family plasmid that has five mob genes, the other being pTF-FC2. The minimal region that was essential for mobilization included the mobA, mobB, and mobC genes, as well as the oriT gene. The mobD and mobE genes were nonessential, but together, they enhanced the mobilization frequency by approximately 300-fold. Mobilization of pTC-F14 between Escherichia coli strains by a chromosomally integrated RP4 plasmid was more than 3,500-fold less efficient than the mobilization of pTF-FC2. When both plasmids were coresident in the same E. coli host, pTC-F14 was mobilized at almost the same frequency as pTF-FC2. This enhanced pTC-F14 mobilization frequency was due to the presence of a combination of the pTF-FC2 mobD and mobE gene products, the functions of which are still unknown. Mob protein interaction at the oriT regions was unidirectionally plasmid specific in that a plasmid with the oriT region of pTC-F14 could be mobilized by pTF-FC2 but not vice versa. No evidence for any negative effect on the transfer of one plasmid by the related, potentially competitive plasmid was obtained.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.