Synthesis of well-defined graft copolymers by combination of enzymatic polycondensation and "click" chemistry

Aliphatic polyesters having pendant azide groups were prepared by enzymatic polycondensation in the presence of lipase from Candida antarctica type B (CAL-B). The grafting reaction to the N(3)-functional polyester was carried out quantitatively at room temperature using copper-catalyzed azide-alkyne cycloaddition (CuAAC, "click" reaction) with monoalkyne-functional poly(ethylene oxide) (alkyne-PEO, M(n) = 750 g/mol). Furthermore, both enzymatic polycondensation and "click" reaction were carried out successfully in sequential one-pot reaction. The graft copolymer was surface-active and self-assembled in water. The graft copolymer had a critical aggregation concentration (cac) of 3 × 10(-2) μM in water determined by surface tension measurements. Above cac, the graft copolymer formed single chains and aggregates having a hydrodynamic radius of ～75 nm. Furthermore, the surface activity of the polymers at the air-water interface was studied by Langmuir trough measurements. The Langmuir isotherm of the graft polymer showed a pseudoplateau resulting from desorption of PEO chains into the subphase upon compression.     

Synthesis and property of chitosan graft copolymer by RAFT polymerization with tosylic acid-chitosan complex

pH- and thermo-sensitive (1→4)-2-amino-2-deoxy-β-d-glucan (i.e. chitosan) graft copolymer was prepared by reversible addition fragmentation chain transfer polymerizations of N-isopropylacrylamide with 4-methylbenzenesulfonic acid (i.e. tosylic acid)-chitosan complex. The polymerization was controlled well, and the amino group of chitosan could be deprotected easily and mildly with 15% Tris solution. The model aldehyde vanillin was conjugated with amino group of chitosan-g-PNIPAM via Schiff base bond (Loading efficiency, LE=77.6 mg/g), and the drug release could be controlled with temperature and pH. This property may promote the chitosan graft copolymer to be used in the field of "smart" drug delivery.     

Preparation, characterization, and properties of chitosan-g-poly(vinyl alcohol) copolymer

The graft copolymer chitosan-g-poly(vinyl alcohol), with nontoxicity, biodegradability, and biocompatibility, was prepared by a novel method. The copolymer with porous net structure was observed by scanning electron microscopy (SEM). It is a potential method to combine chitosan with the synthetic polymers. The grafting reactions were conducted with various poly(vinyl alcohol) (PVA)/6-O-succinate-N-phthaloyl-chitosan (PHCSSA) feed ratios to obtain chitosan-g-poly(vinyl alcohol) copolymers with various PVA contents. The chemical structure of the chitosan-g-poly(vinyl alcohol) was characterized by Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and SEM were also detected to characterize the copolymer.     

The immobilization of enzymes and cells of Bacillus stearothermophilus onto poly(maleic anhydride/styrene)-Co-polyethylene and poly(maleic anhydride/vinyl acetate)-Co-polyethylene

The graft copolymer, poly(maleic anhydride/styrene)-co-polyethylene was prepared. The copolymer immobilized bovine serum albumin (BSA), but the amount coupled appeared to be effected by the amount of styrene in the graft copolymer, temperature, and pH of the coupling medium. Competition existed between hydrolysis of the grafted anhydride groups and the protein. A graft copolymer with 66% add-on immobilized 4.5 mg/glucose oxidase/g copolymer, 4.6 mg alkaline phosphates/g copolymer and 0.2 mg cell of Bacillus stearothermophilus/g copolymer. A number of copolymers containing poly(maleic anhydride/vinyl acetate)-co-polyethylene were prepared to cover a range of grafting levels. These immobilized larger quantities of BSA, alkaline phosphatase, and cells of B. stearothermophilus than did the styrene graft copolymer. The copolymer was also hydrolyzed to release the hydroxyl group from the poly(vinyl acetate) component of the grafted chains. Using p-benzoquinone as the "activating agent," the copolymer coupled to BSA and to acid phosphatase. Using p-toluene-sulfonyl chloride, the copolymer was very effective in immobilizing trypsin.     

Preparation of chitosan derivative with polyethylene glycol side chains for porous structure without specific processing technique

The graft copolymer, chitosan-g-polyethylene glycol (PEG), was prepared through graft polymerization of PEG chains to chitosan due to the esterification reaction between PEG and 6-O-succinate-N-phthaloyl-chitosan (PHCSSA). The graft copolymer with porous structure was observed from scanning electron micrographs. It is a potential method to combine chitosan with the hydrophilic synthetic polymers. The graft reaction was carried out in homogeneous system and yielded copolymers with high grafting content. FTIR, NMR, XRD, DSC, spectrofluorophotometer and SEM were detected to characterize the copolymer.     

Preparation of chitosan-g-polycaprolactone copolymers through ring-opening polymerization of epsilon-caprolactone onto phthaloyl-protected chitosan

The new biodegradable chitosan graft copolymer, chitosan-g-polycaprolactone, was synthesized by the ring-opening graft copolymerization of epsilon-caprolactone onto phthaloyl-protected chitosan (PHCS) at the hydroxyl group in the presence of tin(II) 2-ethylhexanoate catalyst via a protection-graft-deprotection procedure. Toluene acted as a swelling agent in this heterogeneous system. The grafting reactions were conducted with various PHCS/monomer/toluene feed ratios to obtain chitosan-g-polycaprolactone copolymers with various polycaprolactone contents. The chemical structure of the chitosan-g-polycaprolactone was characterized by Fourier transform infrared and one- and two-dimensional NMR spectroscopy. After deprotection, the phthaloyl group was removed and the amino group was regenerated. Thus the obtained chitosan-g-polycaprolactone was an amphoteric hybrid with a large amount of free amino groups and hydrophobic polycaprolactone side chains. Some properties of the final product were also investigated, such as crystallinity, thermal property, and solubility.     

Preparation, characterization, and in vitro drug release behavior of biodegradable chitosan-graft-poly(1, 4-dioxan-2-one) copolymer

A novel copolymer of chitosan-g-poly(p-dioxanone) (CGP) was synthesized in bulk by ring-opening polymerization of p-dioxanone (PDO) initiated by the hydroxyl group or amino group of chitosan using SnOct₂ as catalyst. The chemical structure was determined by ¹H NMR. It was found that the feed ratio of chitosan to PDO had a great effect on the degree of polymerization (DP) and the substitution (DS) of PDO. The thermal stability and crystallization behavior of graft copolymer CGP were closely related to the values of DP and DS. When the resulting copolymer was used as Ibuprofen carrier, the release rate of Ibuprofen decreased compared with that of pure chitosan carrier. The drug release behavior was also influenced by the structure of graft copolymers.     

Chitosan graft copolymer nanoparticles for oral protein drug delivery: preparation and characterization

Several novel functionalized graft copolymer nanoparticles consisting of chitosan (CS) and the monomer methyl methacrylate (MMA), N-dimethylaminoethyl methacrylate hydrochloride (DMAEMC), and N-trimethylaminoethyl methacrylate chloride (TMAEMC), which show a higher solubility than chitosan in a broader pH range, have been prepared by free radical polymerization. The nanoparticles were characterized in terms of particle size, zeta potential, TEM, and FT-IR. These nanoparticles were 150-280 nm in size and carried obvious positive surface charges. Protein-loaded nanoparticles were prepared, and their maximal encapsulation efficiency was up to 100%. In vitro release showed that these nanoparticles provided an initial burst release followed by a slowly sustained release for more than 24 h. These graft copolymer nanoparticles enhanced the absorption and improved the bioavailability of insulin via the gastrointestinal (GI) tract of normal male Sprague-Dawley (SD) strain rats to a greater extent than that of the phosphate buffer solution (PBS) of insulin.     

A chitosan-based flocculant prepared with gamma-irradiation-induced grafting

A natural polymer, chitosan, was modified to prepare an efficient flocculant using grafting method initiated by gamma ray in acid-water solution. A vinyl monomer, acrylamide, was used as the grafted monomer. The graft copolymer obtained was characterized using Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis. Effects of acetic acid concentration, total irradiation dose, dose rate and monomer concentration on the grafting percentage were investigated. Flocculation experiment results demonstrated that the graft copolymer produced was significantly superior to chitosan and polyacrylamide (PAM).     

The immobilizaton of enzymes, bovine serum albumin, and phenylpropylamine to poly(acrylic acid)-polyethylene-based copolymers

A poly(acrylic acid)-polyethylene graft copolymer was prepared and used initially to couple to acid phosphatase, using soluble carbodiimides. Yields which were quite good were obtained with CMC but not with EDAC. The copolymers was used to couple trypsin using EEDQ. Several organic solvents were investigated for the preparation of the "activated" poly(acrylic acid) intermediate. Using the activated system, high concentrations of trypsin were bound but the relative activities were not very high. The yield was good with bovine serum albumin (BSA). When the method was used for invertase, acid phosphatase, and alkaline phosphatase, the yields were poor and the copolymer was shown to absorb protein by an ion-exchange mechanism. However, the activated system gave a good yield of coupling to phenylpropylamine. A polyethylene-coacrylic-acid polymer containing 13% of acrylic acid (by weight) was then converted to the acid chloride by refluxing with thionyl chloride. The chlorinated copolymer which contained 0.7% chlorine and a thionyl-chloride-treated polyethylene control which contained no chlorine were investigated in immobilization studies. Such coupling involved bovine serum albumin (BSA), alkaline phosphatase, trypsin, beta-galactosidase, and invertase. Bovine serum albumin coupled well to the support, but none of the enzymes gave high levels of enzymes activity. Phenylpropylamine coupled well and all of the acid chloride groups were involved. Tyrosine reacted with 63% of the available acid chloride groups.     

Preparation of low molecular weight N-maleated chitosan-graft-PAMAM copolymer for enhanced DNA complexation

Low molecular weight N-maleated chitosan-graft-PAMAM (polyamidoamine) copolymer was prepared through N-maleated chitosan (NMC) by Michael type addition reaction to enhance its solubility in water as well as its cationic character for enhancement of DNA complexation. FTIR, (1)H NMR, XRD and GPC were used to characterize the graft copolymers. The copolymer showed better DNA complexation ability at low N/P ratio than that of chitosan due to increased surface charge density by the incorporation of PAMAM molecule on to chitosan backbone. The copolymer can effectively protect the DNA toward anionic surfactant. In vitro release study showed efficient DNA release occurred at physiological pH (pH 7.4). In vitro cell cytotoxicity test indicated toward less cytotoxicity of NMC-graft-PAMAM copolymers compared to that of 25kDa PEI. Thus, the synthesized NMC-graft-PAMAM copolymers have great potential of finding application in drug and gene delivery.     

Synthesis of organosoluble chitosan derivatives with polyphenolic side chains

A one-pot synthesis was used to produce chitosan derivatives with polyphenolic side chains via a regioselective phenolic coupling reaction. Under Mannich reaction conditions, treatment of chitosan with formaldehyde and methyl 2,4-dihydroxybenzoate gave N-(2,6-dihydroxy-3-methoxycarbonylphenyl)methylated chitosan in good yield (87%). Formation of a CC bond occurred regioselectively at the C(3) position of methyl 2,4-dihydroxybenzoate. Chitosan derivatives having various phenolic compounds as a side chain were easily synthesized in a similar manner. The chitosan derivatives showed good biodegradability and improved their solubility in methanol (9.8mgmL(-1)) and 2-methoxyethanol (> 10mgmL(-1)). The UV protection provided by the derivatives with phenolic benzophenone side chain was evaluated using UV spectra of polyethylene terephthalate and poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) films coated with the derivatives and the derivatives absorbed effectively in the UV-A region (<60%). Self-aggregation of the chitosan derivatives with the phenolic side chain was observed by using a fluorescent probe in aqueous solution.     

Poly(L-lysine)-graft-chitosan copolymers: synthesis, characterization, and gene transfection effect

Polypeptide/polysaccharide graft copolymers poly(L-lysine)-graft-chitosan (PLL-g-Chi) were prepared by ring-opening polymerization (ROP) of epsilon-benzoxycarbonyl L-lysine N-carboxyanhydrides (Z-L-lysine NCA) in the presence of 6-O-triphenylmethyl chitosan. The PLL-g-Chi copolymers were thoroughly characterized by 1H NMR, 13C NMR, Fourier transform infrared (FT-IR), and gel permeation chromatography (GPC). The number-average degree of polymerization of PLL grafted onto the chitosan backbone could be adjusted by controlling the feed ratio of NCA to 6-O-triphenylmethyl chitosan. The particle size of the complexes formed from the copolymer and calf thymus DNA was measured by dynamic light scattering (DLS). It was found in the range of 120 approximately 340 nm. The gel retardation electrophoresis showed that the PLL-g-Chi copolymers possessed better plasmid DNA-binding ability than chitosan. The gene transfection effect in HEK 293T cells of the copolymers was evaluated, and the results showed that the gene transfection ability of the copolymer was better than that of chitosan and was dependent on the PLL grafting ratio. The PLL-g-Chi copolymers could be used as effective gene delivery vectors.     

A new method of controlled grafting modification of chitosan via nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator

The controlled graft modification of chitosan has first been achieved by nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator. Chitosan-TEMPO macroinitiator was obtained from the (60)Co gamma-ray irradiation of N-phthaloylchitosan and 4-hydroxy-TEMPO in DMF under argon atmosphere. The graft copolymers were characterized by (1)H nuclear magnetic resonance ((1)H NMR), Fourier transform infrared spectrometer (FT-IR), X-ray powder diffractometer (XRD) and high performance particle sizer (HPPS). The results indicate that the graft copolymers were successfully synthesized and that the graft polymerization was well controlled by the nitroxide-mediated process. The size distribution of chitosan-g-polystyrene in benzene is very narrow, which may be associated with the "well-defined" polystyrene (PSt) onto chitosan from nitroxide-mediated polymerization. This work provides a new method to prepare chitosan grafting copolymers with controlled molecular weights and "well-defined" structures.     

Dual properties of the deacetylated sites in chitosan for molecular immobilization and biofunctional effects

Polypropylene nonwoven fabric was surface-activated by high-density oxygen microwave plasma, followed by graft copolymerization with acrylic acid (AAc) and then coupling with chitosan molecules. The pAAc-grafted surface containing C=O in carboxylic acid exhibited a hydrophilic character capable of promoting water absorbency. A larger portion of minimum 85% deacetylated sites in chitosan molecules was then coupled with the grafted pAAc (around 149 microg.cm(-2)) by forming amide bonds at their interface. The covalently bonded chitosan was weighted around 44 microg.cm(-2). The smaller portion of the deacetylated sites demonstrated a distinctive structure as polycations, i.e., NH(3)(+), on the immobilized chitosan. The respective structures following sequential reactions were identified using Fourier transform infrared-attenuated total reflection and X-ray photoelectron spectroscopy with peaks deconvolution. The NH(3)(+) sites on the immobilized chitosan exhibited biofunctional in anticoagulation and in antibacterial property. Blood cells agglutination or agglomeration upon the chitosan-immobilized surface, in particular for red blood cells and platelets, resulted from hydrophilic effect derived from the grafted pAAc and the chitosan itself, and ionic attractions between polycations and blood cells. In addition, the agglutinated cells retained their original morphologies. It is therefore very promising to apply this durable chitosan-immobilized surface for making an antibacterial support, at the same time, for retaining blood cell affinity.     

Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester]

Graft copolymerization of rosin-(2-acryloyloxy)ethyl ester (RAEE) onto chitosan (Cts) was carried out under microwave irradiation using potassium persulfate as an initiator. The structures, morphology, and thermal properties of the Cts graft copolymer (Cts-g-PRAEE) were characterized by means of FT-IR, XRD, SEM, and TG. Also, Cts and Cts-g-PRAEE copolymer were used as carriers of fenoprofen calcium (FC), and their controlled release behavior in artificial intestinal juice were studied. The results show that the rate of release of fenoprofen calcium from the carrier of Cts-g-PRAEE copolymer becomes very slower than that of Cts in artificial intestinal juice.     

Hydrophobic chitosan microparticles: heterogeneous phase reaction of chitosan with hydrophobic carbonyl reagents

Hydrophobically modified chitosan microparticles were produced by various syntheses carried out as heterogeneous phase reactions. Perfluorinated carbonyl components such as carbonic acids and acid chlorides were used as hydrophobization agents. To enhance the layer stability preceding cross-linkages between the chitosan macromolecules were introduced. These cross-linkages involve some of the chitosan amino groups. The use of a highly reactive alkylene-maleic anhydride copolymer produces cross-linkages and hydrophobizes the chitosan layer simultaneously in a one-step reaction. The heterogeneous reactions serve as model reactions for the hydrophobization of chitosan films deposited on supports.     

Synthesis and characterization of graft copolymer of chitosan and polyethylene glycol

MPEG was modified with 1,1′-carbonyldiimidazole, then the activated MPEG reacted with primary amino groups of chitosan. Synthesize the graft copolymer of chitosan and polyethylene glycol in two steps. The structure of the copolymer was characterized by FT-IR and 1H-NMR. It agrees with the PEG content of classical stealth nanoparticles materials. The X-ray diffraction and DSC analysis proved that the crystallinity of the copolymer increased. It is a promising material for the stealth nanoparticles. It is a potential new carrier for the drug delivery systems of long-circulation and solid carcinoma.     

Synthesis and properties of a water soluble graft (chitosan-g-2-acrylamidoglycolic acid) copolymer

The present paper reports the graft copolymerization of 2-acrylamidoglycolic acid onto chitosan by using potassium bromate/silver nitrate as an efficient redox initiator in an inert atmosphere. The effect of reaction conditions on grafting parameters i.e. grafting ratio, efficiency, conversion, add on, homopolymer and rate of grafting has been studied. Experimental results show that maximum grafting has been obtained at 0.4 g dm(-3) concentration of chitosan, 8.0×10(-2) mol dm(-3) concentration of 2-acrylamidoglycolic acid and 1.0×10(-3) mol dm(-3) concentration of hydrogen ion. It has also been observed that grafting ratio, add on, conversion, efficiency and rate of grafting increase up to 3.2×10(-3) mol dm(-3) of silver nitrate and 1.7×10(-2) mol dm(-3) of potassium bromate. Time (120 min) and temperature (40°C) were kept constant during reaction. The physicochemical properties of graft copolymer synthesized have been performed in terms of water swelling, metal ion sorption, flocculation and resistance to biodegradability with respect to the chitosan as a parent polymer. The graft copolymer has been characterized by Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis.     

Synthesis and characterization of polymeric soybean oil-g-methyl methacrylate (and n-butyl methacrylate) graft copolymers: biocompatibility and bacterial adhesion

Peroxidation, epoxidation, and/or perepoxidation reactions of soybean oil under air at room temperature resulted in cross-linked polymeric soybean oil peroxides on the surface along with the waxy soluble part, sPSB, with a molecular weight of 4690, containing up to 2.3 wt % peroxide. This soluble polymeric oil peroxide, sPSB, initiated the free radical polymerization of either methyl methacrylate (MMA) or n-butyl methacrylate (nBMA) to give PSB-g-PMMA and PSB-g-PnBMA graft copolymers. The polymers obtained were characterized by (1)H NMR, thermogravimetric analysis, differential scanning calorimetry, and gel permeation chromatography techniques. Polymeric oil as a plasticizer lowered the glass transition of the PSB-g-PMMA graft copolymers. PSB-g-PMMA and PSB-g-PnBMA graft copolymer film samples were also used in cell culture studies. Fibroblast and macrophage cells were strongly adhered and spread on the copolymer film surfaces, which is important in tissue engineering. Bacterial adhesion on PSB-g-PMMA graft copolymer was also studied. Both Staphylococcus epidermidis and Escherichia coli adhered on the graft copolymer better than on homo-PMMA. Furthermore, the latter adhered much better than the former.