Plasma treatments of dressings for wound healing: a review

This review covers the use of plasma technology relevant to the preparation of dressings for wound healing. The current state of knowledge of plasma treatments that have potential to provide enhanced functional surfaces for rapid and effective healing is summarized. Dressings that are specialized to the needs of individual cases of chronic wounds such as diabetic ulcers are a special focus. A summary of the biology of wound healing and a discussion of the various types of plasmas that are suitable for the customizing of wound dressings are given. Plasma treatment allows the surface energy and air permeability of the dressing to be controlled, to ensure optimum interaction with the wound. Plasmas also provide control over the surface chemistry and in cases where the plasma creates energetic ion bombardment, activation with long-lived radicals that can bind therapeutic molecules covalently to the surface of the dressing. Therapeutic innovations enabled by plasma treatment include the attachment of microRNA or antimicrobial peptides. Bioactive molecules that promote subsequent cell adhesion and proliferation can also be bound, leading to the recruitment of cells to the dressing that may be stem cells or patient-derived cells. The presence of a communicating cell population expressing factors promotes healing.     

抗体固定化方法研究进展

在免疫分析和生物芯片中,抗原-抗体特异性结合被广泛应用,其中抗体的固定化是研发高效诊断和分离工具的关键环节。生物分子工程、材料化学与交联剂化学的进步极大地促进了抗体固定化技术的发展。 抗体可以通过物理吸附、共价偶联和亲和相互作用固定到不同类型的固相表面。 抗体固定化的目标是以一种正确的空间取向将抗体固定到固相表面,在完全保留抗体构象和活性的同时最大化抗原的结合能力,这对固相化抗体的分析性能至关重要。 对固定抗体到固相载体表面的各种最新方法进行了阐述,包括物理吸附法,通过羧基、氨基、巯基、糖基和点击化学的共价结合法以及基于生物亲和作用的固定法,并对固定化抗体的表征方法进行了归纳,最后对抗体固定化方法的发展方向进行了展望。     

Bifunctional oligo(ethylene glycol) decorated surfaces which permit covalent protein immobilization and resist protein adsorption

In this article, surface coatings derived from homo-bifunctional tri(ethylene glycol) (EG₃) and hexa(ethylene glycol) (EG₆) molecules which have two terminal aldehyde groups are reported. These homo-bifunctional molecules can be used to functionalize amine-terminated surfaces through crosslinking one aldehyde group to surface amine groups, while leaving the other aldehyde group available for covalent immobilization of proteins. Best of all, after reducing remaining aldehyde groups on the surface with a reducing agent, sodium borohydride, the surface becomes oligo(ethylene glycol) (OEG)-terminated. The OEG-terminated surface can resist nonspecific protein adsorption, a feature that is often required for many biosensors and biomedical devices. Although some mixed self-assembled monolayers formed from two different organothiols also permit covalent protein immobilization and resist nonspecific protein adsorption, the procedure reported herein requires only one type of homo-bifunctional molecule and can be applied to both silicon and gold surfaces.     

Versatile derivatisation of solid support media for covalent bonding on DNA-microchips

A chemistry was developed that permits on DNA-arrays both the covalent immobilisation of pre-fabricated nucleic acids-such as oligonucleotides, PCR-products or peptide nucleic acid oligomers-and the in situ synthesis of such compounds on either glass or polypropylene surfaces. Bonding was found to be stable even after some 30 cycles of stripping. Due to a dendrimeric structure of the linker molecule, the loading can be modified in a controlled manner and increased beyond the capacity of glass without negative effects on hybridisation efficiency. Also, the chemistry warrants the modulation of other surface properties such as charge or hydrophobicity. Preferentially, attachment of nucleic acids takes place only via the terminal amino-group of amino-modified oligonucleotides or the terminal hydroxyl-group of unmodified molecules so that the entire molecule is accessible to probe hybridisation. This derivatisation represents a support chemistry versatile enough to serve nearly all current forms of DNA-arrays or microchips.     

Characterization of EGF coupling to aminated silicone rubber surfaces

Tethering of growth factors to biomaterial substrates via a polyethylene glycol (PEG) spacer has been established as a means of controlling dosage and conformation of the protein at the material surface, while retaining biological activity. However, the extent of modification through a comparison of bound versus unbound protein has not generally been characterized. In this work, covalent tethering of epidermal growth factor (EGF) to allylamine plasma modified polydimethylsiloxane (PDMS) substrates is characterized to determine the nature of the bound growth factor and to optimize the conditions for the reaction. Tethering is achieved via conjugation of EGF with homobifunctional N-hydroxysuccinimide (NHS) ester of PEG-butanoic acid (SBA2-PEG) in solution, followed by exposure of the pegylated EGF to the aminated surfaces (solution first reaction). SDS-PAGE analysis indicates that a low ratio of EGF:PEG is required to maximize the yield of the EGF-PEG reaction; a relatively short reaction time is needed to limit hydrolysis of the NHS ester. With increasing amounts of PEG and a higher reaction time, a higher fraction of the EGF can be covalently tethered to the surfaces, as shown by binding of 125I-labeled EGF and subsequent washing with sodium dodecyl sulfate (SDS) to remove adsorbed protein. However, even under the optimal reaction conditions established by the SDS-PAGE analysis, higher molecular weight EGF-PEG complexes are observed by SDS-PAGE and matrix-assisted laser desorption/ionization (MALDI). The presence of these complexes, as well as unreacted growth factor, can lead to a surface of heterogeneous composition. While these surfaces were found to have biological activity, stimulating the adhesion and growth of corneal epithelial cells versus PDMS controls, further optimization of reaction conditions, including the use of a homobifunctional PEG linker and possibly separation of reaction species are required to achieve a uniformly active and well-defined biomaterial surface.     

Generic bioaffinity silicone surfaces

Synthetic polymer surfaces require surface modification to improve biocompatibility. A generic route to biocompatible silicone elastomers is described involving high yield surface functionalization of standard silicones with hydrosilanes, hydrosilylation using asymmetric, allyl-, NSC-terminated PEO of narrow molecular weight, and covalent modification in one step with amine-containing biological molecules including oligopeptides (YIGSR, RGDS), proteins (EGF, albumin, fibrinogen, mucin), and glycosaminoglycans (heparin). Efficient, high-density binding (e.g., 0.2 EGF molecules/nm2) was demonstrated using radiolabeling studies. The resulting surfaces were demonstrated to be biocompatible by further reaction with biomolecules, for example, thrombosis suppression on surfaces modified by heparin + ATIII, and the formation of confluent corneal epithelial cell layers on EGF, RGDS, or YIGSR surfaces.     

Immobilization of immunoglobulins on silica surfaces. Stability.

The development of new immunosensors based on surface-concentration-measuring devices requires a stable and reproducible immobilization of antibodies on well-characterized solid surfaces. We here report on the immobilization of immunoglobulin G (IgG) on chemically modified silica surfaces. Such surfaces may be used in various surface-oriented analytical methods. Reactive groups were introduced to the silica surfaces by chemical-vapour deposition of silane. The surfaces were characterized by ellipsometry, contact-angle measurements and scanning electron microscopy. IgG covalently bound by the use of thiol-disulphide exchange reactions, thereby controlling the maximum number of covalent bonds to the surface, was compared with IgG adsorbed on various silica surfaces. This comparison showed that the covalently bound IgG has a superior stability when the pH was lowered or incubation with detergents, urea or ethylene glycol was carried out. The result was evaluated by ellipsometry, an optical technique that renders possible the quantification of amounts of immobilized IgG. The results outline the possibilities of obtaining a controlled covalent binding of biomolecules to solid surfaces with an optimal stability and biological activity of the immobilized molecules.     

The selectivity of protein‐imprinted gels and its relation to protein properties: A computer simulation study

Polymer‐based protein recognition systems have enormous potential within clinical and diagnostic fields due to their reusability, biocompatibility, ease of manufacturing, and potential specificity. Imprinted polymer matrices have been extensively studied and applied as a simple technique for creating artificial polymer‐based recognition gels for a target molecule. Although this technique has been proven effective when targeting small molecules (such as drugs), imprinting of proteins have so far resulted in materials with limited selectivity due to the large molecular size of the protein and aqueous environment. Using coarse‐grained molecular simulation, we investigate the relation between protein makeup, polymer properties, and the selectivity of imprinted gels. Nonspecific binding that results in poor selectivity is shown to be strongly dependent on surface chemistry of the template and competitor proteins as well as on polymer chemistry. Residence time distributions of proteins diffusing within the gels provide a transparent picture of the relation between polymer constitution, protein properties, and the nonspecific interactions with the imprinted gel. The pronounced effect of protein surface chemistry on imprinted gel specificity is demonstrated.     

Preparation, morphological characterization, and activity of thin films of horseradish peroxidase

Active uniform films of horseradish peroxidase (HRP) have been prepared by covalent binding on Si/SiO(2) or glass supports previously activated by silanization and succinylation. Labeling by fluorescent or by Electron Spin Resonance (ESR) probes was used to quantify the surface density of active groups and of horseradish peroxidase. Atomic Force Microscopy (AFM) imaging was used to characterize the surface morphology. We observed that a non-uniform protein adsorption due to physical interactions was present when the supports were not activated for covalent binding and was, in large part, removed by washing. The enzyme deposited by covalent binding formed homogeneous layers with a height in the range 60-90 A. By using a fluorescent label, we calculated a protein density of 3.6 x 10(12) molecules cm(-2) on Si/SiO(2), corresponding to an estimated area per molecule of 2800 A(2) which is in agreement with the value expected on the basis of the crystallographic data considering the formation of a monomolecular layer. The protein density of the layer immobilized on glass was similar (1.9 x10(12) molecules cm(-2)). The enzyme immobilized on both supports showed a k(cat)/K(M) being of the order of 3-5x10(5) M(-1)s(-1) that is 1/20th of free HRP. The half-life time of the activity of the enzyme immobilized by covalent binding was longer than 40 days at 6 degrees C.     

Recent developments in the site-specific immobilization of proteins onto solid supports

Immobilization of proteins onto surfaces is of great importance in numerous applications, including protein analysis, drug screening, and medical diagnostics, among others. The success of all these technologies relies on the immobilization technique employed to attach a protein to the corresponding surface. Non-specific physical adsorption or chemical cross-linking with appropriate surfaces results in the immobilization of the protein in random orientations. Site-specific covalent attachment, on the other hand, leads to molecules being arranged in a definite, orderly fashion and allows the use of spacers and linkers to help minimize steric hindrances between the protein and the surface. The present work reviews the latest chemical and biochemical developments for the site-specific covalent attachment of proteins onto solid supports.     

Chitosan scaffolds for biomolecular assembly: coupling nucleic acid probes for detecting hybridization

Chitosan, a naturally occurring biopolymer, was used as a scaffold for the covalent binding of single-stranded DNA oligonucleotide probes in a fluorescence-based nucleic acid hybridization assay. Chitosan's pH dependent chemical and electrostatic properties enable its deposition on electrodes and metal surfaces, as well as on the bottom of microtiter plates. A combinatorial 96-well microtiter plate format was used to optimize chemistries and reaction conditions leading to hybridization experiments. We found the coupling of oligonucleotides using relatively common glutaraldehyde chemistry was quite robust. Our hybridization results for complementary ssDNA oligonucleotides (E. coli dnaK sequences) demonstrated linear fluorescence intensity with concentration of E. coli dnaK-specific oligonucleotide from 0.73 microM to 6.6 microM. Moreover, hybridization assays were specific as there was minimal fluorescence associated with noncomplementary groEL oligonucleotide. Finally, these results demonstrate the portability of a DNA hybridization assay based on covalent coupling to chitosan, which, in turn, can be deposited onto various surfaces. More arduous surface preparation techniques involving silanizing agents and hazardous washing reagents are eliminated using this technique.     

Immobilization of immunoglobulins on silica surfaces. Kinetics of immobilization and influence of ionic strength.

The kinetics of, and the influence of ionic strength on, the immobilization of rabbit immunoglobulin G (IgG) on different types of well-characterized silica surfaces were investigated. Adsorptive immobilization was compared with covalent attachment via thiol-disulphide exchange reactions. The amount of immobilized IgG on five different types of silica surfaces as a function of IgG concentration, at two different ionic strengths, was determined. The IgG-solid-surface interaction involved different types of interaction forces, depending on the surface chemistry of the solid surface. The solid-surface chemistry is an important parameter determining the immobilized amount of IgG. When conditions for covalent attachment of IgG to the surfaces were fulfilled, the IgG showed high affinity and the immobilized amount of IgG showed a fast saturation. Changes in ionic strength showed no significant influence on the kinetics of immobilization on these surfaces. The amount of covalently attached IgG was partially ionic-strength-dependent, indicating that adsorptive interactions were involved. The results are of fundamental interest for the development of new immunosensors based on surface-concentration-measuring devices.     

Study into the kinetic properties and surface attachment of a thermostable adenylate kinase

A thermostable adenylate kinase (tAK) has been used as model protein contaminant on surfaces, so used because residual protein after high temperature wash steps can be detected at extremely low concentrations. This gives the potential for accurate, quantitative measurement of the effectiveness of different wash processes in removing protein contamination. Current methods utilise non-covalent (physisorbtion) of tAK to surfaces, but this can be relatively easily removed. In this study, the covalent binding of tAK to surfaces was studied to provide an alternative model for surface contamination. Kinetic analysis showed that the efficiency of the enzyme expressed as the catalytic rate over the Michaelis constant (k_cat/K_M) increased from 8.45±3.04 mM^?1 s^?1 in solution to 32.23±3.20 or 24.46±4.41 mM^?1 s^?1 when the enzyme was immobilised onto polypropylene or plasma activated polypropylene respectively. Maleic anhydride plasma activated polypropylene showed potential to provide a more robust challenge for washing processes as it retained significantly higher amounts of tAK enzyme than polypropylene in simple washing experiments. Inhibition of the coupled enzyme (luciferase/luciferin) system used for the detection of adenylate kinase activity, was observed for a secondary product of the reaction. This needs to be taken into consideration when using the assay to estimate cleaning efficacy.     

Sensitivity enhancement of surface plasmon resonance biosensing of small molecules

Surface plasmon resonance (SPR) biosensor formats using gold nanoparticle or protein signal amplification for the sensitive assay of small molecules were developed using progesterone as a model compound. Progesterone was immobilized to a dextran surface in the Biacore biosensor through in situ covalent immobilization using an oligoethylene glycol linker attached to the 4 position of the steroid. This surface produced stable antibody binding for in excess of 1100 assay cycles. Using this surface, assays were developed for progesterone using 10- and 20-nm gold-streptavidin labels attached to biotinylated monoclonal antibody in both label prebinding and sequential binding formats. Prelabeling formats gave no signal enhancement but produced assays with limits of detection of 143 pg/ml, compared with approximately 1 ng/ml in previous studies. Sequential binding formats gave signal enhancements of 2.2-fold over the monoclonal antibody and a limit of detection of 23.1 pg/ml. It was found that secondary antibody labeling gave 8.1-fold signal enhancements and a limit of detection of 20.1 pg/ml, whereas use of secondary antibody-25 nm gold complexes provided more signal enhancement (13-fold) and a further improvement in limit of detection of 8.6 pg/ml.     

The interdependence of protein surface topography and bound water molecules revealed by surface accessibility and fractal density measures.

To characterize water binding to proteins, which is fundamental to protein folding, stability and activity, the relationships of 10,837 bound water positions to protein surface shape and residue type were analyzed in 56 high-resolution crystallographic structures. Fractal atomic density and accessibility algorithms provided an objective characterization of deep grooves in solvent-accessible protein surfaces. These deep grooves consistently had approximately the diameter of one water molecule, suggesting that deep grooves are formed by the interactions between protein atoms and bound water molecules. Protein surface topography dominates the chemistry and extent of water binding. Protein surface area within grooves bound three times as many water molecules as non-groove surface; grooves accounted for one-quarter of the total surface area yet bound half the water molecules. Moreover, only within grooves did bound water molecules discriminate between different side-chains. In grooves, main-chain surface was as hydrated as that of the most hydrophilic side-chains, Asp and Glu, whereas outside grooves all main and side-chains bound water to a similar, and much decreased, extent. This identification of the interdependence of protein surface shape and hydration has general implications for modelling and prediction of protein surface shape, recognition, local folding and solvent binding.     

Patterned biofunctional poly(acrylic acid) brushes on silicon surfaces

Protein patterning was carried out using a simple procedure based on photolithography wherein the protein was not subjected to UV irradiation and high temperatures or contacted with denaturing solvents or strongly acidic or basic solutions. Self-assembled monolayers of poly(ethylene glycol) (PEG) on silicon surfaces were exposed to oxygen plasma through a patterned photoresist. The etched regions were back-filled with an initiator for surface-initiated atom transfer radical polymerization (ATRP). ATRP of sodium acrylate was readily achieved at room temperature in an aqueous medium. Protonation of the polymer resulted in patterned poly(acrylic acid) (PAA) brushes. A variety of biomolecules containing amino groups could be covalently tethered to the dense carboxyl groups of the brush, under relatively mild conditions. The PEG regions surrounding the PAA brush greatly reduced nonspecific adsorption. Avidin was covalently attached to PAA brushes, and biotin-tagged proteins could be immobilized through avidin-biotin interaction. Such an immobilization method, which is based on specific interactions, is expected to better retain protein functionality than direct covalent binding. Using biotin-tagged bovine serum albumin (BSA) as a model, a simple strategy was developed for immobilization of small biological molecules using BSA as linkages, while BSA can simultaneously block nonspecific interactions.     

Solid-phase sequence analysis of proteins electroblotted or spotted onto polyvinylidene difluoride membranes

Electroblotted proteins noncovalently bound to polyvinylidene difluoride (PVDF) membranes are typically sequenced using adsorptive sequencer protocols (gas-phase or pulsed-liquid) that do not require a covalent linkage between protein and surface. We have developed simple chemical protocols where proteins are first electroblotted onto unmodified PVDF membranes, visualized with common protein stains, and then immobilized for solid-phase sequence analysis. Adsorbed, stained proteins are first treated with phenylisothiocyanate (PITC) to modify alpha and epsilon amines. The protein is then overlayed with a solution of 1,4-phenylene di-isothiocyanate (DITC), followed by a few microliters of a basic solution containing a poly(alkylamine). As the polymer dries onto the surface both polymer and remaining protein amino groups are crosslinked by DITC. The protein is thus immobilized to the membrane surface by entrapment in a thin polymer coating. The coating is transparent to the degradation chemistry, and extensive enough to remain immobilized even in the absence of any covalent link between polymer and surface. Partial modification with PITC allows for identification of N-terminal and internal lysine residues during sequencing. The process was tested with a variety of poly(alkylamines), linear and branched, with molecular weights ranging from 600 to over 100,000. Proteins bound in this manner were successfully sequenced using covalent (solid-phase) sequencer protocols with cycle times as short as 26 min.     

Enhancement of blood compatibility of poly(urethane) substrates by mussel-inspired adhesive heparin coating

Heparin immobilization on surfaces has drawn a great deal of attention because of its potential application in enhancing blood compatibility of various biomedical devices such as catheters, grafts, and stents. Existing methods for the heparin immobilization are based on covalent linkage formation and electrostatic interaction between substrates and heparin molecules. However, complicated multistep procedures and uncontrolled desorption of heparin are limitations of these methods. In this work, we report a new heparin derivative that exhibits robust adhesion on surfaces. The derivative, called hepamine, was prepared via conjugation of dopamine, a mussel-inspired adhesive moiety, onto a heparin backbone. Immersion of poly(urethane) substrates into an aqueous solution of hepamine resulted in robust heparin coating of the poly(urethane), the most widely used polymeric material for blood-contacting medical devices. The hepamine-coated poly(urethane) substrate showed significant inhibition of blood coagulation and platelet adhesion. The use of hepamine for surface modification is advantageous for several reasons: for example, no chemical pretreatment of the substrates is necessary, and surface functionalization is a simple, one-step procedure. Thus, the heparin immobilization method described herein is an excellent alternative approach for the introduction of heparin molecules onto surfaces.     

Controlled three-dimensional immobilization of biomolecules on chemically patterned surfaces

We used electron-beam lithography to fabricate chemical nanostructures, i.e. amino groups in aromatic self-assembled monolayers (SAMs) on gold surfaces. The amino groups are utilized as reactive species for mild covalent attachment of fluorescently labeled proteins. Since non-radiative energy transfer results in strong quenching of fluorescent dyes in the vicinity of the metal surfaces, different labeling strategies were investigated. Spacers of varying length were introduced between the gold surface and the fluorescently labeled proteins. First, streptavidin was directly coupled to the amino groups of the SAMs via a glutaraldehyde linker and fluorescently labeled biotin (X-Biotin) was added, resulting in a distance of approximately 2 nm between the dyes and the surface. Scanning confocal fluorescence images show that efficient energy transfer from the dye to the surface occurs, which is reflected in poor signal-to-background (S/B) ratios of approximately 1. Coupling of a second streptavidin layer increases the S/B-ratio only slightly to approximately 2. The S/B-ratio of the fluorescence signals could be further increased to approximately 4 by coupling of an additional fluorescently labeled antibody layer. Finally, we introduced tetraethylenepentamine as functional spacer molecule to diminish fluorescence quenching by the surface. We demonstrate that the use of this spacer in combination with multiple antibody layers enables the controlled fabrication of highly fluorescent three-dimensional nanostructures with S/B-ratios of >20. The presented technique might be used advantageously for the controlled three-dimensional immobilization of single protein or DNA molecules and the well-defined assembly of protein complexes.     

Self-assembled monolayers and polymer brushes in biotechnology: current applications and future perspectives

The chemistry and topography of a surface affect biological response and are of fundamental importance, especially when living systems encounter synthetic surfaces. Most biomolecules have immense recognition power (specific binding) and simultaneously have a tendency to physically adsorb onto a solid substrate without specific receptor recognition (nonspecific adsorption). Therefore, to create useful materials for many biotechnology applications, interfaces are required that have both enhanced specific binding and reduced nonspecific binding. Thus, in applications such as sensors, the tailoring of surface chemistry and the use of micro or nanofabrication techniques becomes an important avenue for the production of surfaces with specific binding properties and minimal background interference. Both self-assembled monolayers (SAMs) and polymer brushes have attracted considerable attention as surface-active materials. In this review, we discuss both of these materials with their potential applications in biotechnology. We also summarize lithographic methods for pattern formation using combined top-down and bottom-up approaches and briefly discuss the future of these materials by describing emerging new applications.