Tau proteins: the molecular structure and mode of binding on microtubules

Tau is a family of closely related proteins (55,000-62,000 mol wt) which are contained in the nerve cells and copolymerize with tubulin to induce the formation of microtubules in vitro. All information so far has indicated that tau is closely apposed to the microtubule lattice, and there was no indication of domains projecting from the microtubule polymer lattice. We have studied the molecular structure of the tau factor and its mode of binding on microtubules using the quick-freeze, deep-etch method (QF.DE) and low angle rotary shadowing technique. Phosphocellulose column-purified tubulin from porcine brain was polymerized with tau and the centrifuged pellets were processed by QF.DE. We observed periodic armlike elements (18.7 +/- 4.8 nm long) projecting from the microtubule surface. Most of the projections appeared to cross-link adjacent microtubules. We measured the longitudinal periodicity of tau projections on the microtubules and found it to match the 6-dimer pattern better than the 12-dimer pattern. The stoichiometry of tau versus tubulin in preparations of tau saturated microtubules was 1:approximately 5.0 (molar ratio). Tau molecules adsorbed on mica took on rodlike forms (56.1 +/- 14.1 nm long). Although both tau and MAP1 are contained in axons, competitive binding studies demonstrated that the binding sites of tau and MAP1A on the microtubule surfaces are most distinct, although they may partially overlap.     

Two microtubule-associated proteins of the Arabidopsis MAP65 family function differently on microtubules

The organization and dynamics of microtubules are regulated by microtubule-associated proteins, or MAPs. In Arabidopsis (Arabidopsis thaliana), nine genes encode proteins of the evolutionarily conserved MAP65 family. We proposed that different MAP65s might have distinct roles in the interaction with microtubules. In this study, two AtMAP65 proteins, AtMAP65-1 and AtMAP65-6, were chosen to test this hypothesis in vitro. Although both fusion proteins were able to cosediment with microtubules in vitro, different properties on tubulin polymerization and microtubule bundling were observed. AtMAP65-1 was able to promote tubulin polymerization, enhance microtubule nucleation, and decrease the critical concentration for tubulin polymerization. It also induced the formation of large microtubule bundles by forming cross-bridges between microtubules evenly along the whole length of microtubules. In the presence of AtMAP65-1, microtubule bundles were more resistant to cold and dilution treatments. AtMAP65-6, however, demonstrated no activity in promoting tubulin polymerization and stabilizing preformed microtubules. AtMAP65-6 induced microtubules to form a mesh-like network with individual microtubules. Cross-bridge-like interactions were only found at regional sites between microtubules. The microtubule network induced by AtMAP65-6 was more resistant to high concentration of NaCl than the bundles induced by AtMAP65-1. Purified monospecific anti-AtMAP65-6 antibodies revealed that AtMAP65-6 was associated with mitochondria in Arabidopsis cells. It was concluded that these two MAP65 proteins were targeted to distinct sites, thus performing distinct functions in Arabidopsis cells.     

The control of microtubule stability in vitro and in transfected cells by MAP1B and SCG10

In neurons, the regulation of microtubules plays an important role for neurite outgrowth, axonal elongation, and growth cone steering. SCG10 family proteins are the only known neuronal proteins that have a strong destabilizing effect, are highly enriched in growth cones and are thought to play an important role during axonal elongation. MAP1B, a microtubule-stabilizing protein, is found in growth cones as well, therefore it was important to test their effect on microtubules in the presence of both proteins. We used recombinant proteins in microtubule assembly assays and in transfected COS-7 cells to analyze their combined effects in vitro and in living cells, respectively. Individually, both proteins showed their expected activities in microtubule stabilization and destruction respectively. In MAP1B/SCG10 double-transfected cells, MAP1B could not protect microtubules from SCG10-induced disassembly in most cells, in particular not in cells that contained high levels of SCG10. This suggests that SCG10 is more potent to destabilize microtubules than MAP1B to rescue them. In microtubule assembly assays, MAP1B promoted microtubule formation at a ratio of 1 MAP1B per 70 tubulin dimers while a ratio of 1 SCG10 per two tubulin dimers was needed to destroy microtubules. In addition to its known binding to tubulin dimers, SCG10 binds also to purified microtubules in growth cones of dorsal root ganglion neurons in culture. In conclusion, neuronal microtubules are regulated by antagonistic effects of MAP1B and SCG10 and a fine tuning of the balance of these proteins may be critical for the regulation of microtubule dynamics in growth cones.     

Two-state displacement by the kinesin-14 Ncd stalk

The nonprocessive kinesin-14 Ncd motor binds to microtubules and hydrolyzes ATP, undergoing a single displacement before releasing the microtubule. A lever-like rotation of the coiled-coil stalk is thought to drive Ncd displacements or steps along microtubules. Crystal structures and cryoelectron microscopy reconstructions imply that stalk rotation is correlated with ADP release and microtubule binding by the motor. Here we report FRET assays showing that the end of the stalk is more than ~9nm from the microtubule when wild-type Ncd binds microtubules without added nucleotide, but the stalk is within ~6nm of the microtubule surface when the microtubule-bound motor binds an ATP analogue, matching the rotated state observed in crystal structures. We propose that the stalk rotation is initiated when the motor binds to microtubules and releases ADP, and is completed when ATP binds.     

Interaction of an Overexpressed gamma-Tubulin with Microtubules In Vivo and In Vitro

gamma-Tubulin is an ubiquitous MTOC (microtubule-organizing center) component essential for the regulation of microtubule functions. A 1.8 kb cDNA coding for gamma-tubulin was isolated from CHO cells. Analysis of nucleotide sequence predicts a protein of 451 amino acids, which is over 97% identical to human and Xenopus gamma-tubulin. When CHO cells were transiently transfected with the gamma-tubulin clone, epitope-tagged full-length, as well as truncated polypeptides (amino acids 1-398 and 1-340), resulted in the formation of cytoplasmic foci of various sizes. Although one of the foci was identified as the centrosome, the rest of the dots were not associated with any other centrosomal components tested so far. The pattern of microtubule organization was not affected by induction of such gamma-tubulin-containing dots in transfected cells. In addition, the cytoplasmic foci were unable to serve as the site for microtubule regrowth in nocodazole-treated cells upon removal of the drug, suggesting that gamma-tubulin-containing foci were not involved in the activity for microtubule formation and organization. Using the monomeric form of Chlamydomonas gamma-tubulin purified from insect Sf9 cells (), interaction between gamma-tubulin and microtubules was further investigated by immunoelectron microscopy. Microtubules incubated with gamma-tubulin monomers in vitro were associated with more gold particles conjugated with gamma-tubulin than in controls where no exogenous gamma-tubulin was added. However, binding of gamma-tubulin to microtubules was not extensive and was easily lost during sample preparation. Although gamma-tubulin was detected at the minus end of microtubules several times more frequently than the plus end, the majority of gold particles were seen along the microtubule length. These results contradict the previous reports (; ), which might be ascribed to the difference in the level of protein expression in transfected cells.     

In vivo and in vitro studies on the role of HMW-MAPs in taxol-induced microtubule bundling

The involvement of high molecular weight microtubule-associated proteins (HMW-MAPs) in the process of taxol-induced microtubule bundling has been studied using immunofluorescence and electron microscopy. Immunofluorescence microscopy shows that HMW-MAPs are released from microtubules in granulosa cells which have been extracted in a Triton X-100 microtubule-stabilizing buffer (T-MTSB), unless the cells are pretreated with taxol. 1.0 microM taxol treatment for 48 h results in microtubule bundle formation and the retention of HMW-MAPs in these cells upon extraction with T-MTSB. Electron microscopy demonstrates that microtubules in control cytoskeletons are devoid of surface structures whereas the microtubules in taxol-treated cytoskeletons are decorated by globular particles of a mean diameter of 19.5 nm. The assembly of 3 X cycled whole microtubule protein (tubulin plus associated proteins) in vitro in the presence of 1.0 microM taxol, results in the formation of closely packed microtubules decorated with irregularly spaced globular particles, similar in size to those observed in cytoskeletons of taxol-treated granulosa cells. Microtubules assembled in vitro in the absence of taxol display prominent filamentous extensions from the microtubule surface and center-to-center spacings greater than that observed for microtubules assembled in the presence of taxol. Brain microtubule protein was purified into 6 s and HMW-MAP-enriched fractions, and the effects of taxol on the assembly and morphology of these fractions, separately or in combination, were examined. Microtubules assembled from 6 s tubulin alone or 6 s tubulin plus taxol (without HMW-MAPs) were short, free structures whereas those formed in the presence of taxol from 6 s tubulin and a HMW-MAP-enriched fraction were extensively crosslinked into aggregates. These data suggest that taxol induces microtubule bundling by stabilizing the association of HMW-MAPs with the microtubule surface which promotes lateral aggregation.     

The contributions of microtubule stability and dynamic instability to adenovirus nuclear localization efficiency

Adenoviruses (Ads) utilize host cell microtubules to traverse the intracellular space and reach the nucleus in a highly efficient manner. Previous studies have shown that Ad infection promotes the formation of stable, posttranslationally modified microtubules by a RhoA-dependent mechanism. Ad infection also shifts key parameters of microtubule dynamic instability by a Rac1-dependent mechanism, resulting in microtubules with lower catastrophe frequencies, persistent growth phases, and a bias toward net growth compared to microtubules in uninfected cells. Until now it was unclear whether changes in RhoGTPase activity or microtubule dynamics had a direct impact on the efficiency of Ad microtubule-dependent nuclear localization. Here we have performed synchronous Ad infections and utilized confocal microscopy to analyze the individual contributions of RhoA activation, Rac1 activation, microtubule stability, dynamic behavior, and posttranslational modifications on Ad nuclear localization efficiency (NLE). We found that drug-induced suppression of microtubule dynamics impaired Ad NLE by disrupting the radial organization of the microtubule array. When the microtubule array was maintained, the suppression or enhancement of microtubule turnover did not significantly affect Ad NLE. Furthermore, RhoA activation or the formation of acetylated microtubules did not enhance Ad NLE. In contrast, active Rac1 was required for efficient Ad nuclear localization. Because Rac1 mediates persistent growth of microtubules to the lamellar regions of cells, we propose that Ad-induced activation of Rac1 enhances the ability of microtubules to "search and capture" incoming virus particles.     

The alpha subunit of sea urchin sperm outer arm dynein mediates structural and rigor binding to microtubules

Glass-adsorbed intact sea urchin outer arm dynein and its beta/IC1 subunit supports movement of microtubules, yet does not form a rigor complex upon depletion of ATP (16). We show here that rigor is a feature of the isolated intact outer arm, and that this property subfractionates with its alpha heavy chain. Intact dynein mediates the formation of ATP-sensitive microtubule bundles, as does the purified alpha heavy chain, indicating that both particles are capable of binding to microtubules in an ATP-sensitive manner. In contrast, the beta/IC1 subunit does not bundle microtubules. Bundles formed with intact dynein are composed of ribbon-like sheets of parallel microtubules that are separated by 54 nm (center-to-center) and display the same longitudinal repeat (24 nm) and cross-sectional geometry of dynein arms as do outer doublets in situ. Bundles formed by the alpha heavy chain are composed of microtubules with a center-to-center spacing of 43 nm and display infrequent, fine crossbridges. In contrast to the bridges formed by the intact arm, the links formed by the alpha subunit are irregularly spaced, suggesting that binding of the alpha heavy chain to the microtubules is not cooperative. Cosedimentation studies showed that: (a) some of the intact dynein binds in an ATP-dependent manner and some binds in an ATP-independent manner; (b) the beta/IC1 subunit does not cosediment with microtubules under any conditions; and (c) the alpha heavy chain cosediments with microtubules in the absence or presence of MgATP2-. These results suggest that the structural binding observed in the intact arm also is a property of its alpha heavy chain. We conclude that whereas force-generation is a function of the beta/IC1 subunit, both structural and ATP-sensitive (rigor) binding of the arm to the microtubule are mediated by the alpha subunit.     

Molecular requirements for kinetochore-associated microtubule formation in mammalian cells

In centrosome-containing cells, microtubules nucleated at centrosomes are thought to play a major role in spindle assembly. In addition, microtubule formation at kinetochores has also been observed, most recently under physiological conditions in live cells. The relative contributions of microtubule formation at kinetochores and centrosomes to spindle assembly, and their molecular requirements, remain incompletely understood. Using mammalian cells released from nocodazole-induced disassembly, we observed microtubule formation at centrosomes and at Bub1-positive sites on chromosomes. Kinetochore-associated microtubules rapidly coalesced into pole-like structures in a dynein-dependent manner. Microinjection of excess importin-beta or depletion of the Ran-dependent spindle assembly factor, TPX2, blocked kinetochore-associated microtubule formation, enhanced centrosome-associated microtubule formation, but did not prevent chromosome capture by centrosomal microtubules. Depletion of the chromosome passenger protein, survivin, reduced microtubule formation at kinetochores in an MCAK-dependent manner. Microtubule formation in cells depleted of Bub1 or Nuf2 was indistinguishable from that in controls. Our data demonstrate that microtubule assembly at centrosomes and kinetochores is kinetically distinct and differentially regulated. The presence of microtubules at kinetochores provides a mechanism to reconcile the time required for spindle assembly in vivo with that observed in computer simulations of search and capture.     

APC is a component of an organizing template for cortical microtubule networks

A microtubule network on the basal cortex of polarized epithelial cells consists of non-centrosomal microtubules of mixed polarity. Here, we investigate the proteins that are involved in organizing this network, and we show that end-binding protein 1 (EB1), adenomatous polyposis coli protein (APC) and p150Glued - although considered to be microtubule plus-end-binding proteins - are localized along the entire length of microtubules within the network, and at T-junctions between microtubules. The network shows microtubule behaviours that arise from physical interactions between microtubules, including microtubule plus-end stabilization on the sides of other microtubules, and sliding of microtubule ends along other microtubules. APC also localizes to the basal cortex. Microtubules grew over and paused at APC puncta; an in vitro reconstituted microtubule network overlaid APC puncta; and microtubule network reconstitution was inhibited by function-blocking APC antibodies. Thus, APC is a component of a cortical template that guides microtubule network formation.     

Microtubules facilitate autophagosome formation and fusion of autophagosomes with endosomes

Nutrient deprivation of eukaryotic cells provokes a variety of stress responses, including autophagy. Autophagy is carried out by autophagosomes which sequester cytosolic components and organelles for degradation after fusion with protease-containing endosomes. To determine the role of microtubules in autophagy, we used nocodazole and vinblastine to disrupt microtubules and independently measured formation and fusion of autophagsosomes in primary rat hepatocytes. By measuring the translocation of GFP-LC3, an autophagosomal marker, to autophagosomes and the lipidation of GFP-LC3, we quantified the rate and magnitude of autophagosome formation. Starvation increased both the rate of autophagosome formation over the basal level and the total number of autophagosomes per cell. Maximal autophagosome formation required an intact microtubule network. Fusion of autophagosomes with endosomes, assayed by acquisition of protease-inhibitor sensitivity as well as overlap with LysoTracker Red-positive endosomes, required intact microtubules. Live-cell imaging demonstrated that autophagosomes were motile structures, and their movement also required microtubules. Interestingly, vinblastine stimulated autophagosome formation more than twofold before any discernable change in the microtubule network was observed. Stimulation of autophagosome formation by vinblastine was independent of nutrients and mTOR activity but was inhibited by depletion of the Autophagy proteins Atg5 and Atg6, known to be required for autophagy.     

Spindle microtubule differentiation and deployment during micronuclear mitosis in Paramecium

Spindles underwent a 12-fold elongation before anaphase B was completed during the closed mitoses of micronuclei in Paramecium tetraurelia. Two main classes of spindle microtubules have been identified. A peripheral sheath of microtubules with diameters of 27-32 nm was found to be associated with the nuclear envelope and confined to the midportion of each spindle. Most of the other microtubules had diameters of approximately 24 nm and were present along the entire lengths of spindles. Nearly all of the 24-nm microtubules were eliminated from spindle midportions (largely because of microtubule disassembly) at a relatively early stage of spindle elongation. Disassembly of some of these microtubules also occurred at the ends of spindles. About 60% of the total microtubule content of spindles was lost at this stage. Most, perhaps all, peripheral sheath microtubules remained intact. Many of them detached from the nuclear envelope and regrouped to form a compact microtubule bundle in the spindle midportion. There was little, if any, further polymerization of 24-nm microtubules after the disassembly phase. Polymerization of microtubules with diameters of 27-32 nm continued as spindle elongation progressed. Most microtubules in the midportions of well-elongated spindles were constructed from 14-16 protofilaments. A few 24-nm microtubules with 13 protofilaments were also present. The implications of these findings for spatial control of microtubule assembly, disassembly, positioning, and membrane association, that apparently discriminate between microtubules with different protofilament numbers have been explored. The possibility that microtubule sliding occurs during spindle elongation has also been considered.     

Highly processive motility is not a general feature of the kinesins

Evidence is presented that the kinesin-related ncd protein is not as processive as kinesin. In low surface density motility experiments, a dimeric ncd fusion protein behaved mechanistically more similar to non-processive myosins than to the highly processive kinesin. First, there was a critical microtubule length for motility; only microtubules longer than this critical length moved in low density ncd surfaces, which suggested that multiple ncd proteins must cooperate to move microtubules in the surface assay. Under similar conditions, native kinesin demonstrated no critical microtubule length, consistent with the behavior of a highly processive motor. Second, addition of methylcellulose to decrease microtubule diffusion decreased the critical microtubule length for motility. Also, the rates of microtubule motility were microtubule length dependent in methylcellulose; short microtubules, that interacted with fewer ncd proteins, moved more slowly than long microtubules that interacted with more ncd proteins. In contrast, short microtubules, that interacted with one or a few kinesin proteins, moved on average slightly faster than long microtubules that interacted with multiple kinesins. We conclude that a degree of processivity as high as that of kinesin, where a single dimer can move over distances on the order of one micrometer, may not be a general mechanistic feature of the kinesin superfamily. Received: 16 September 1997 / Accepted: 4 November 1997     

MCAK-independent functions of ch-Tog/XMAP215 in microtubule plus-end dynamics

The formation of a functional bipolar mitotic spindle is essential for genetic integrity. In human cells, the microtubule polymerase XMAP215/ch-Tog ensures spindle bipolarity by counteracting the activity of the microtubule-depolymerizing kinesin XKCM1/MCAK. Their antagonistic effects on microtubule polymerization confer dynamic instability on microtubules assembled in cell-free systems. It is, however, unclear if a similar interplay governs microtubule behavior in mammalian cells in vivo. Using real-time analysis of spindle assembly, we found that ch-Tog is required to produce or maintain long centrosomal microtubules after nuclear-envelope breakdown. In the absence of ch-Tog, microtubule assembly at centrosomes was impaired and microtubules were nondynamic. Interkinetochore distances and the lengths of kinetochore fibers were also reduced in these cells. Codepleting MCAK with ch-Tog improved kinetochore fiber length and interkinetochore separation but, surprisingly, did not rescue centrosomal microtubule assembly and microtubule dynamics. Our data therefore suggest that ch-Tog has at least two distinct roles in spindle formation. First, it protects kinetochore microtubules from depolymerization by MCAK. Second, ch-Tog plays an essential role in centrosomal microtubule assembly, a function independent of MCAK activity. Thus, the notion that the antagonistic activities of MCAK and ch-Tog determine overall microtubule stability is too simplistic to apply to human cells.     

Microtubule-organizing centres: a re-evaluation

The number, length, distribution and polarity of microtubules are largely controlled by microtubule-organizing centres, which nucleate and anchor microtubule minus ends in a process that requires gamma-tubulin. Here we discuss recent evidence indicating that gamma-tubulin-dependent formation of new microtubules is not restricted to conventional microtubule-organizing centres. These findings suggest that the spatio-temporal control of microtubule nucleation is more complex than previously thought, leading us to a re-evaluation of the concept of the microtubule-organizing center.     

Observation and quantification of individual microtubule behavior in vivo: microtubule dynamics are cell-type specific

Recent experiments have demonstrated that the behavior of the interphase microtubule array is cell-type specific: microtubules in epithelial cells are less dynamic than microtubules in fibroblasts (Pepper-kok et al., 1990; Wadsworth and McGrail, 1990). To determine which parameters of microtubule dynamic instability behavior are responsible for this difference, we have examined the behavior of individual microtubules in both cell types after injection with rhodamine-labeled tubulin subunits. Individual microtubules in both cell types were observed to grow, shorten, and pause, as expected. The average amount of time microtubules remained within the lamellae of CHO fibroblasts, measured from images acquired at 10-s intervals, was significantly shorter than the average amount of time microtubules remained within lamellae of PtK1 epithelial cells. Further analysis of individual microtubule behavior from images acquired at 2-s intervals reveals that microtubules in PtK1 cells undergo multiple brief episodes of growth and shortening, resulting in little overall change in the microtubule network. In contrast, microtubules in lamellae of CHO fibroblasts are observed to undergo fewer transitions which are of longer average duration, resulting in substantial changes in the microtubule network over time. A small subset of more stable microtubules was also detected in CHO fibroblasts. Quantification of the various parameters of dynamic instability behavior from these sequences demonstrates that the average rates of both growth and shortening are significantly greater for the majority of microtubules in fibroblasts than for microtubules in epithelial cells (19.8 +/- 10.8 microns/min, 32.2 +/- 17.7 microns/min, 11.9 +/- 6.5 microns/min, and 19.7 +/- 8.1 microns/min, respectively). The frequency of catastrophe events (1/interval between catastrophe events) was similar in both cell types, but the frequency of rescue events (1/time spent shrinking) was significantly higher in PtK1 cells. Thus, individual microtubules in PtK1 lamellae undergo frequent excursions of short duration and extent, whereas most microtubules in CHO lamellae undergo more extensive excursions often resulting in the appearance or disappearance of microtubules within the field of view. These observations provide the first direct demonstration of cell-type specific behavior of individual microtubules in living cells, and indicate that these differences can be brought about by modulation of the frequency of rescue. These results directly support the view that microtubule dynamic instability behavior is regulated in a cell-type specific manner.     

Dynamic instability and motile events of native microtubules from squid axoplasm

Native microtubules from extruded axoplasm of squid giant axons were used as a paradigm to characterize the motion of organelles along free microtubules and to study the dynamics of microtubule length changes. The motion of large round organelles was visualized by AVEC-DIC microscopy and analyzed at a temporal resolution of 10 frames per second. The movements were smooth and showed no major changes in velocity or direction. During translocation, the organelles paused very rarely. Superimposed on the rather constant mean velocity was a velocity fluctuation, which indicated that the organelles are subject to considerable thermal motion during translocation. Evidence for a regular low-frequency oscillation was not found. The thermal motion was anisotropic such that axial motion was less restricted than lateral motion. We conclude that the crossbridge connecting the moving organelle to the microtubule has a flexible region that behaves like a hinge, which permits preferential movement in the direction parallel to the microtubule. The dynamic changes in length of native microtubules were studied at a temporal resolution of 1 Hz. About 98% of the native microtubules maintained their length ("stable" microtubules), while 2% showed phases of growing and/or shrinking typical for dynamic instability ("dynamic" microtubules). Gliding and organelle motion were not influenced by dynamic length changes. Transitions between growing and shrinking phases were low-frequency events (1-10 minutes per cycle). However, a new type of microtubule length fluctuation, which occurred at a high frequency (a few seconds per cycle), was detected. The length changes were in the 1-3 micron range. The latter events were very prominent at the (+) ends. It appears that the native axonal microtubules are much more stable than the purified microtubules and the microtubules of cultured cells that have been studied thus far. Potential mechanisms accounting for the three states of microtubule stability are discussed. These studies show that the native microtubules from squid giant axons are a very useful paradigm for studying microtubule-related motility events and microtubule dynamics.     

S. pombe kinesins-8 promote both nucleation and catastrophe of microtubules

The kinesins-8 were originally thought to be microtubule depolymerases, but are now emerging as more versatile catalysts of microtubule dynamics. We show here that S. pombe Klp5-436 and Klp6-440 are non-processive plus-end-directed motors whose in vitro velocities on S. pombe microtubules at 7 and 23 nm s(-1) are too slow to keep pace with the growing tips of dynamic interphase microtubules in living S. pombe. In vitro, Klp5 and 6 dimers exhibit a hitherto-undescribed combination of strong enhancement of microtubule nucleation with no effect on growth rate or catastrophe frequency. By contrast in vivo, both Klp5 and Klp6 promote microtubule catastrophe at cell ends whilst Klp6 also increases the number of interphase microtubule arrays (IMAs). Our data support a model in which Klp5/6 bind tightly to free tubulin heterodimers, strongly promoting the nucleation of new microtubules, and then continue to land as a tubulin-motor complex on the tips of growing microtubules, with the motors then dissociating after a few seconds residence on the lattice. In vivo, we predict that only at cell ends, when growing microtubule tips become lodged and their growth slows down, will Klp5/6 motor activity succeed in tracking growing microtubule tips. This mechanism would allow Klp5/6 to detect the arrival of microtubule tips at cells ends and to amplify the intrinsic tendency for microtubules to catastrophise in compression at cell ends. Our evidence identifies Klp5 and 6 as spatial regulators of microtubule dynamics that enhance both microtubule nucleation at the cell centre and microtubule catastrophe at the cell ends.     

Low resolution structure of microtubules in solution. Synchrotron X-ray scattering and electron microscopy of taxol-induced microtubules assembled from purified tubulin in comparison with glycerol and MAP-induced microtubules.

The structure of microtubules has been characterized to 3 nm resolution employing time-resolved X-ray scattering. This has revealed detailed structural features of microtubules not observed before in solution. The polymerization of highly purified tubulin, induced by the antitumour drug taxol, has been employed as a microtubule model system. This assembly reaction requires Mg2+, is optimal at a 1:1 taxol to tubulin heterodimer molar ratio, proceeds with GTP or GDP and is intrinsically reversible. The X-ray scattering profiles are consistent with identical non-globular alpha and beta-tubulin monomers ordered within the known helical surface lattice of microtubules. Purified tubulin-taxol microtubules have a smaller mean diameter (approx. 22 nm) than those induced by microtubule associated proteins or glycerol (approx. 24 nm), but nearly identical wall substructure to the resolution of the measurements. This is because the majority of the former consist of only 12 protofilaments instead of the typical 13 protofilaments, as confirmed by electron microscopy of thin-sectioned, negatively stained and ice-embedded taxol microtubules. It may be concluded that taxol induces a slight reduction of the lateral contact curvature between tubulin monomers. The main fringe pattern observed in cryo-electron micrographs is consistent with a simple 12 protofilament 3-start skewed lattice model. Cylindrical closure of this lattice can be achieved by tilting the lattice 0.8 degrees with respect to the microtubule axis. The closure implies a discontinuity in the type of lateral contacts between the tubulin monomers (regardless of whether these are of the -alpha-beta- or the -alpha-alpha-/-beta-beta- type), which indicates that lateral contacts and the subunit specificity of taxol binding are, to a large degree, equivalent.     

Substructure of sea urchin egg cytoplasmic dynein

The substructure of the cytoplasmic dynein molecule was studied using the quick-freeze, deep-etch technique. Cytoplasmic dynein purified as a 12 S form from the eggs of the sea urchin Hemicentrotus pulcherrimus was composed of a single high molecular weight polypeptide. Rotary shadowing images of cytoplasmic dynein either sprayed on to a mica surface or quick-frozen on mica flakes demonstrated a single-headed molecule, in contrast to the two-headed molecule of sea urchin sperm flagellar 21 S dynein. More detailed substructure was visualized by rotary shadowing after quick-freeze deep-etching. Cytoplasmic dynein consisted of a head and a stem. The head was pear-shaped (16 nm X 11 nm) and a little smaller than the pear-shaped head of 21 S dynein (18 nm X 14 nm). The form of the stem was irregular, and its apparent length varied from 0 to 32 nm. Binding of cytoplasmic dynein to brain microtubule in the solution was observed by negative staining, and that in the precipitate was examined by the quick-freeze, deep-etch method as well. Both methods revealed the presence of two kinds of microtubules, one a fully decorated microtubule and the other a non-decorated microtubule. Cytoplasmic dynein bound to microtubule also appeared as a globular particle. Neither the periodic binding nor the crossbridges that were observed with 21 S dynein were formed by cytoplasmic dynein, although cytoplasmic dynein appeared to bind to microtubules co-operatively.