Quantitative analysis of fatty acid precursors in marine samples: direct conversion of wax ester alcohols and dimethylacetals to FAMEs

To apply fatty acid analyses to the study of foraging ecology and diet determination, all compounds that may be deposited as fatty acids in a predator must be quantified in the prey. These compounds include the usual fatty acids in acyl lipids, but also the alcohols of wax esters and the vinyl ethers of plasmalogens. In routine fatty acid analysis, samples are extracted and transesterified (methylated), resulting in the formation of fatty acid methyl esters (FAMEs); however, fatty alcohols and dimethylacetals (DMAs) are also generated if wax esters or plasmalogens are present. Here, we present a new method using a modified Jones' reagent to oxidize these alcohols and DMAs to free fatty acids (FFAs). These FFAs are then easily methylated and quantitatively recombined with FAMEs from the same sample. This generates a fatty acid signature of prey that is equivalent to that which the predator has available for deposition upon digestion of that prey. This method is validated with alcohol and DMA standards. Its application to typical marine samples is also presented, demonstrating the change in effective fatty acid signature after inclusion of fatty acids derived from wax esters and plasmalogens.     

Conversion of acid oil by-produced in vegetable oil refining to biodiesel fuel by immobilized Candida antarctica lipase

Acid oil, which is a by-product in vegetable oil refining, mainly contains free fatty acids (FFAs) and acylglycerols, and is a candidate of materials for production of biodiesel fuel. A mixture (acid oil model) of refined FFAs and vegetable oil was recently reported to be converted to fatty acid methyl esters (FAMEs) at >98% conversion by a two-step reaction system comprising methyl esterification of FFAs and methanolysis of acylglycerols using immobilized Candida antarctica lipase. The two-step system was thus applied to conversion of acid oil by-produced in vegetable oil refining to biodiesel fuel. Under similar conditions that were determined by using acid oil model, however, the lipase was unstable and was not durable for repeated use. The inactivation of the lipase was successfully avoided by addition of excess amounts of methanol (MeOH) in the first-step reaction, and by addition of vegetable oil and glycerol in the second-step reaction. Hence, the first-step reaction was conducted by shaking a mixture of 66 wt% acid oil (77.9 wt% FFAs, 10.8 wt% acylglycerols) and 34 wt% MeOH with 1 wt% immobilized lipase, to convert FFAs to their methyl esters. The second-step reaction was performed by shaking a mixture of 52.3 wt% dehydrated first-step product (79.7 wt% FAMEs, 9.7 wt% acylglycerols), 42.2 wt% rapeseed oil, and 5.5 wt% MeOH using 6 wt% immobilized lipase in the presence of additional 10 wt% glycerol, to convert acylglycerols to FAMEs. The resulting product was composed of 91.1 wt% FAMEs, 0.6 wt% FFAs, 0.8 wt% triacylglycerols, 2.3 wt% diacylglycerols, and 5.2 wt% other compounds. Even though each step of reaction was repeated every 24 h by transferring the immobilized lipase to the fresh substrate mixture, the composition was maintained for >100 cycles.     

Improvement of a process for purification of tocopherols and sterols from soybean oil deodorizer distillate

Soybean oil deodorizer distillate (SODD) is a useful material for purification of tocopherols and phytosterols (referred to as sterols). The SODD was first distilled, and the two substances were enriched. The preparation, which mainly contained free fatty acids (FFAs), sterols, and tocopherols, was named SODD tocopherols/sterols concentrate (SODDTSC). If sterols are converted to steryl esters and FFAs are converted to fatty acid methyl esters (FAMEs), relatively easy purification of tocopherols and steryl esters can be achieved because the boiling points of FAMEs, tocopherols, and steryl esters are different significantly. Hence, the development of a new two-step in situ reaction system was tried out for esterification of sterols with FFAs (first step) and esterification of FFAs with methanol (MeOH) (second step). A mixture of SODDTSC/water (95:5, w/w) and 250 units (U)/g-mixture of Candida rugosa lipase was prepared beforehand for the first-step reaction, and was agitated at 40 °C for 24 h with dehydration at 20 mmHg. Sterols were efficiently esterified, and the degree of esterification reached 95%. To the reaction mixture were added 7 M amounts of MeOH against unreacted FFAs, 20 wt.% water, and 25 U/g-mixture of Alcaligenes sp. lipase. The second-step reaction was then conducted at 30 °C for 20 h. Consequently, 95% FFAs were converted to FAME, and steryl esters synthesized by the first-step reaction were not reconverted to free sterols. Finally, SODDTSC (1.5 kg) was subjected to this two-step in situ reaction, and tocopherols and steryl esters were purified from the reaction mixture by short-path distillation. Tocopherols were purified to 72% (yield, 88%) and steryl esters were purified to 97% (yield, 97%).     

Exploring a new,soluble lipase for FAMEs production in water-containing systems using crude soybean oil as a feedstock

Performance of a new lipase from Novozymes (Callera Trans L) was studied for fatty acid methylesters (FAMEs) production. In order to reduce the costs of the industrial enzymatic biodiesel production process, the enzyme was used in its soluble form instead of the common immobilized preparations. Cost reduction was also achieved by using crude (non-degummed) soybean oil as a cheaper raw material. The effect of water content during Callera Trans L-catalyzed FAMEs production was explored from evaluation of free fatty acids (FFAs), tri- di or monoacylglycerides (TAGs, DAGs, MAGs) variation during 24 h reaction. An excellent 96% FAMEs release was achieved when low (3–5%) water concentrations were used in the conversion of crude soybean oil. Time course HPLC analysis of the reaction products suggests that the soluble enzyme proceeds through a mechanism of methylester formation based on a first hydrolysis step that releases FFAs, DAGs or MAGs, followed by esterification of FFAs with methanol for FAMEs production.     

Analysis of fatty acids from lipopolysaccharides of Bacteroides thetaiotaomicron and Bacteroides fragilis]

The aim of this study was to determine and to compare fatty acids occurring in lipopolysaccharides (LPS) isolated from B. thetaiotaomicron and B. fragilis strains of different origin. Lipopolysaccharides of three B. thetaiotaomicron strains and four B. fragilis strains were isolated by phenol-water extraction according to the procedure of Westphal and Jann (1965). Water-phase LPS fractions were then treated with nucleases and purified by ultracentrifugation as described by Gmeiner (1975). Fatty acid methyl esters, obtained by methanolysis of LPS, were analysed in gas-liquid chromatography combined with mass spectrometry (GLC-MS). Trimethylsilylated hydroxyl groups of fatty acid methyl esters were identified with GLC-MS using a method of selective ion monitoring (SIM). Lipopolysaccharides of B. thetaiotaomicron and B. fragilis strains contained long-chain (15-18 carbon atoms) fatty acids. The broad spectrum of simple long-chain and branched-chain fatty acids as well as 3-hydroxy fatty acids were detected. The main fatty acid of analyzed bacterial species was 3-hydroxy-hexadecanoic acid (3OH C16:0). Several 3-hydroxy fatty acids were detected in LPS of examined strains. Fatty acids occurring in LPS of B. thetaiotaomicron and B. fragilis strains appeared to be qualitatively similar. Quantitative differences in fatty acids composition of lipopolysaccharides isolated from strains of different origin were observed.     

Methanol-free biosynthesis of fatty acid methyl ester (FAME) in Synechocystis sp. PCC 6803

To meet the increasing global demand of biodiesel over the next decades, alternative methods for producing one of the key constituents of biodiesel (e.g. fatty acid methyl esters (FAMEs)) are needed. Algal biodiesel has been a long-term target compromised by excessive costs for harvesting and processing. In this work, we engineered cyanobacteria to convert carbon dioxide into excreted FAME, without requiring methanol as a methyl donor. To produce FAME, acyl-ACP, a product of the fatty acid biosynthesis pathway, was first converted into free fatty acid (FFA) by a thioesterase, namely ’UcFatB1 from Umbellularia californica. Next, by employing a juvenile hormone acid O-methyltransferase (DmJHAMT) from Drosophila melanogaster and S-adenosylmethionine (SAM) as a methyl donor, FFAs were converted into corresponding FAMEs. The esters were naturally secreted extracellularly, allowing simple product separation by solvent overlay as opposed to conventional algae biodiesel production where the algae biomass must first be harvested and processed for transesterification of extracted triacylglycerols (TAGs). By optimizing both the promoter and RBS elements, up to 120 mg/L of FAMEs were produced in 10 days. Quantification of key proteins and metabolites, together with constructs over-expressing SAM synthetase (MetK), indicated that ’UcFatB1, MetK, and DmJHAMT were the main factors limiting pathway flux. In order to solve the latter limitation, two reconstructed ancestral sequences of DmJHAMT were also tried, resulting in strains showing a broader methyl ester chain-length profile in comparison to the native DmJHAMT. Altogether, this work demonstrates a promising pathway for direct sunlight-driven conversion of CO₂ into excreted FAME.     

Dipeptide Synthesis by an Aminopeptidase from Streptomyces septatus TH-2 and Its Application to Synthesis of Biologically Active Peptides

Dipeptide synthesis by aminopeptidase from Streptomyces septatus TH-2 (SSAP) was demonstrated using free amino acid as an acyl donor and aminoacyl methyl ester as an acyl acceptor in 98% methanol (MeOH). SSAP retained its activity after more than 100 h in 98% MeOH, and in the case of phenylalanyl-phenylalanine methyl ester synthesis, the enzyme reaction reached equilibrium when more than 50% of the free phenylalanine was converted to the product. In an investigation of the specificity of SSAP toward acyl donors and acyl acceptors, SSAP showed a broad specificity toward various free amino acids and aminoacyl methyl esters. Furthermore, we applied SSAP to the synthesis of several biologically active peptides, such as aspartyl-phenylalanine, alanyl-tyrosine, and valyl-tyrosine methyl esters.     

Dipeptide synthesis by an aminopeptidase from Streptomyces septatus TH-2 and its application to synthesis of biologically active peptides

Dipeptide synthesis by aminopeptidase from Streptomyces septatus TH-2 (SSAP) was demonstrated using free amino acid as an acyl donor and aminoacyl methyl ester as an acyl acceptor in 98% methanol (MeOH). SSAP retained its activity after more than 100 h in 98% MeOH, and in the case of phenylalanyl-phenylalanine methyl ester synthesis, the enzyme reaction reached equilibrium when more than 50% of the free phenylalanine was converted to the product. In an investigation of the specificity of SSAP toward acyl donors and acyl acceptors, SSAP showed a broad specificity toward various free amino acids and aminoacyl methyl esters. Furthermore, we applied SSAP to the synthesis of several biologically active peptides, such as aspartyl-phenylalanine, alanyl-tyrosine, and valyl-tyrosine methyl esters.     

Comparison of three GC/MS methodologies for the analysis of fatty acids in Sinorhizobium meliloti: development of a micro-scale, one-vial method

Three protocols for fatty acid analysis in Sinorhizobium meliloti were improved by the addition of a number of standards/controls and a silylation step which allowed the determination of recoveries, extents of conversion of lipids to fatty acid methyl esters (FAMEs) and extents of side reactions. Basic hydrolysis followed by acid-catalyzed methylation and transmethylation with sodium methoxide, were the best for the analysis of 3-hydroxy- and cyclopropane fatty acids, respectively. A micro-scale, one-vial method that employed sodium methoxide/methanol was equally efficient and on a 1000-fold smaller scale than standard methods. Because this method avoids aqueous extractions, 3-hydroxybutanoic acid was detected as its trimethylsilyloxy methyl ester along with FAMEs.     

Biochemical characterization of the Pseudomonas putida 3-hydroxyacyl ACP:CoA transacylase,which diverts intermediates of fatty acid de novo biosynthesis

The 3-hydroxyacyl ACP:CoA transacylase (PhaG) was recently identified in various Pseudomonas species and catalyzes the diversion of ACP thioester intermediates of fatty acid de novo biosynthesis toward the respective CoA thioesters, which serve as precursors for polyester and rhamnolipid biosynthesis. PhaG from Pseudomonas putida was overproduced in Escherichia coli as a C-terminal hexahistidine-tagged (His(6)) fusion protein in high yield. The His(6)-PhaG was purified to homogeneity by refolding of PhaG obtained from inclusion bodies, and a new enzyme assay was established. Kinetic analysis of the 3-hydroxyacyl transfer to ACP, catalyzed by His(6)-PhaG, gave K(0.5) values of 28 microm (ACP) and 65 microm (3-hydroxyacyl-CoA) considering V(max) values of 11.7 milliunits/mg and 12.4 milliunits/mg, respectively. A Hill coefficient of 1.38 (ACP) and 1.32 (3-hydroxyacyl-CoA) indicated a positive substrate cooperativity. Subcellular localization studies showed that PhaG is not attached to polyester granules and resides in the cytosol. Gel filtration chromatography analysis in combination with light scattering analysis indicated substrate-induced dimerization of the transacylase. A threading model of PhaG was developed based on the homology to an epoxide hydrolase (1cqz). In addition, the alignment with the alpha/beta-hydrolase fold region indicated that PhaG belongs to alpha/beta-hydrolase superfamily. Accordingly, CD analysis suggested a secondary structure composition of 29% alpha-helix, 22% beta-sheet, 18% beta-turn, and 31% random coil. Site-specific mutagenesis of seven highly conserved amino acid residues (Asp-60, Ser-102, His-177, Asp-182, His-192, Asp-223, His-251) was used to validate the protein model and to investigate organization of the transacylase active site. Only the D182(A/E) mutation was permissive with about 30% specific activity of the wild type enzyme. Furthermore, this mutation caused a change in substrate specificity, indicating a functional role in substrate binding. The serine-specific agent phenylmethylsulfonyl fluoride (PMSF) or the histidine-specific agent diethylpyrocarbonate (DEPC) caused inhibition of 3-hydroxyacyl transfer to holo-ACP, and the S102(A/T) or H251(A/R) PhaG mutant was incapable of catalyzing 3-hydroxyacyl transfer, suggesting that these residues are part of a catalytic triad.     

Biodiesel production from rice bran by a two-step in-situ process

The production of fatty acid methyl esters (FAMEs) by a two-step in-situ transesterification from two kinds of rice bran was investigated in this study. The method included an in-situ acid-catalyzed esterification followed by an in-situ base-catalyzed transesterification. Free fatty acids (FFAs) level was reduced to less than 1% for both rice bran A (initial FFAs content = 3%) and rice bran B (initial FFAs content = 30%) in the first step under the following conditions: 10 g rice bran, methanol to rice bran ratio 15 mL/g, H₂SO₄ to rice bran mass ratio 0.18, 60 °C reaction temperature, 600 rpm stirring rate, 15 min reaction time. The organic phase of the first step product was collected and subjected to a second step reaction by adding 8 mL of 5 N NaOH solution and allowing to react for 60 and 30 min for rice bran A and rice bran B, respectively. FAMEs yields of 96.8% and 97.4% were obtained for rice bran A and rice bran B, respectively, after this two-step in-situ reaction.     

Fast and accurate preparation fatty acid methyl esters by microwave-assisted derivatization in the yeast Saccharomyces cerevisiae

We present a fast and accurate method for preparation of fatty acid methyl esters (FAMEs) using microwave-assisted derivatization of fatty acids present in yeast samples. The esterification of free/bound fatty acids to FAMEs was completed within 5 min, which is 24 times faster than with conventional heating methods. The developed method was validated in two ways: (1) through comparison with a conventional method (hot plate) and (2) through validation with the standard reference material (SRM) 3275-2 omega-3 and omega-6 fatty acids in fish oil (from the Nation Institute of Standards and Technology, USA). There were no significant differences (P>0.05) in yields of FAMEs with both validations. By performing a simple modification of closed-vessel microwave heating, it was possible to carry out the esterification in Pyrex glass tubes kept inside the closed vessel. Hereby, we are able to increase the number of sample preparations to several hundred samples per day as the time for preparation of reused vessels was eliminated. Pretreated cell disruption steps are not required, since the direct FAME preparation provides equally quantitative results. The new microwave-assisted derivatization method facilitates the preparation of FAMEs directly from yeast cells, but the method is likely to also be applicable for other biological samples.     

Isotope and elemental effects indicate a rate-limiting methyl transfer as the initial step in the reaction catalyzed by Escherichia coli cyclopropane fatty acid synthase

Cyclopropane fatty acid (CFA) synthases catalyze the formation of cyclopropane rings on unsaturated fatty acids (UFAs) that are natural components of membrane phospholipids. The methylene carbon of the cyclopropane ring derives from the activated methyl group of S-adenosyl-L-methionine (AdoMet), affording S-adenosyl-L-homocysteine (AdoHcys) and a proton as the remaining products. This reaction is unique among AdoMet-dependent enzymes, because the olefin of the UFA substrate is isolated and unactivated toward nucleophilic or electrophilic addition, raising the question as to the timing and mechanism of proton loss from the activated methyl group of AdoMet. Two distinct reaction schemes have been proposed for this transformation; however, neither was based on detailed in vitro mechanistic analysis of the enzyme. In the preceding paper [Iwig, D. F. and Booker, S. J. (2004) Biochemistry 43, http://dx.doi.org/10.1021/bi048693+], we described the synthesis of two analogues of AdoMet, Se-adenosyl-L-selenomethionine (SeAdoMet) and Te-adenosyl-L-telluromethionine (TeAdoMet), and their intrinsic reactivity toward polar chemistry in which AdoMet is known to be involved. We found that the electrophilicity of AdoMet and its onium congeners followed the series SeAdoMet > AdoMet > TeAdoMet, while the acidity of the carbons adjacent to the relevant heteroatom followed the series AdoMet > SeAdoMet > TeAdoMet. When each of these compounds was used as the methylene donor in the CFA synthase reaction, the kinetic parameters of the reaction, k(cat) and k(cat) K(M)(-1), followed the series SeAdoMet > AdoMet > TeAdoMet, suggesting that the reaction takes place via methyl transfer followed by proton loss, rather than by processes that are initiated by proton abstraction from AdoMet. Use of S-adenosyl-L-[methyl-d(3)]methionine as the methylene donor resulted in an inverse isotope effect of 0.87 +/- 0.083, supporting this conclusion and also indicating that the methyl transfer takes place via a tight s(N)2 transition state.     

Kinetic and electrophoretic analysis of transmethylation reactions in intact Xenopus laevis oocytes

Transmethylation reactions in fully grown Xenopus oocytes were analyzed following the microinjection of S-adenosyl-L-[methyl-3H]methionine (AdoMet). The size of the endogenous AdoMet pool, measured by cation exchange high pressure liquid chromatography is 5.91 pmol/oocyte. The AdoMet pool turns over with a half-time of 2 h, at a rate of 2.07 pmol/h/oocyte. Fractionation experiments indicate that approximately one-third of the AdoMet in oocytes is utilized for protein carboxylmethylation reactions and another third is metabolized into small molecules which are secreted. The remainder of the intracellular AdoMet is used primarily for protein N-methylation reactions, although some methylation of phospholipids and nucleic acids also occurs. Polyacrylamide gel electrophoresis of 3H-methylated proteins at pH 2.4 in the presence of sodium dodecyl sulfate demonstrated that methyl esters are associated with a heterogeneous group of proteins in both the nucleus and cytoplasm of oocytes, coincident with the subcellular distribution of the protein D-aspartyl, L-isoaspartyl methyl transferase (O'Connor, C. M. (1987) J. Biol. Chem. 262, 10398-10403). The protein methyl esters associated with oocyte proteins turn over rapidly, as evidenced from the presence of [3H]methanol in the medium. The calculated rate of protein carboxyl methylation, 0.7 pmol/h/oocyte, is similar to that of protein synthesis in oocytes, suggesting that the modification of derivatized aspartyl residues represents a major pathway in oocyte protein metabolism. Since the formation of protein methyl esters is unaffected by cycloheximide, it is unlikely that methyl-accepting sites on oocyte proteins arise primarily from errors in protein synthesis. Unlike protein carboxyl methylation reactions, protein N-methylation reactions are closely linked to protein synthesis, and the methyl group linkages are stable over a period of at least 4 h. Numerous protein acceptors for N-methylation reactions were identified by polyacrylamide gel electrophoresis.     

A peroxygenase pathway involved in the biosynthesis of epoxy fatty acids in oat

While oat (Avena sativa) has long been known to produce epoxy fatty acids in seeds, synthesized by a peroxygenase pathway, the gene encoding the peroxygenase remains to be determined. Here we report identification of a peroxygenase cDNA AsPXG1 from developing seeds of oat. AsPXG1 is a small protein with 249 amino acids in length and contains conserved heme-binding residues and a calcium-binding motif. When expressed in Pichia pastoris and Escherichia coli, AsPXG1 catalyzes the strictly hydroperoxide-dependent epoxidation of unsaturated fatty acids. It prefers hydroperoxy-trienoic acids over hydroperoxy-dienoic acids as oxygen donors to oxidize a wide range of unsaturated fatty acids with cis double bonds. Oleic acid is the most preferred substrate. The acyl carrier substrate specificity assay showed phospholipid and acyl-CoA were not effective substrate forms for AsPXG1 and it could only use free fatty acid or fatty acid methyl esters as substrates. A second gene, AsLOX2, cloned from oat codes for a 9-lipoxygenase catalyzing the synthesis of 9-hydroperoxy-dienoic and 9-hydroperoxy-trienoic acids, respectively, when linoleic (18:2-9c,12c) and linolenic (18:3-9c,12c,15c) acids were used as substrates. The peroxygenase pathway was reconstituted in vitro using a mixture of AsPXG1 and AsLOX2 extracts from E. coli. Incubation of methyl oleate and linoleic acid or linolenic acid with the enzyme mixture produced methyl 9,10-epoxy stearate. Incubation of linoleic acid alone with a mixture of AsPXG1 and AsLOX2 produced two major epoxy fatty acids, 9,10-epoxy-12-cis-octadecenoic acid and 12,13-epoxy-9-cis-octadecenoic acid, and a minor epoxy fatty acid, probably 12,13-epoxy-9-hydroxy-10-transoctadecenoic acid. AsPXG1 predominately catalyzes intermolecular peroxygenation.     

气相色谱法测定啤酒中的游离脂肪酸

气相色谱法测定啤酒中辛酸到二十二碳酸共１１种游离脂肪酸,采用多级溶剂萃取及薄层色谱纯化技术进行样品制备,并采充氮措施抑制脂肪酸的氧化产生,此方法有较好的重复性和回收率。     

An active site mutant of Escherichia coli cyclopropane fatty acid synthase forms new non-natural fatty acids providing insights on the mechanism of the enzymatic reaction

We have produced and purified an active site mutant of the Escherichia coli cyclopropane fatty acid synthase (CFAS) by replacing the strictly conserved G236 within cyclopropane synthases, by a glutamate residue, which corresponds to E146 of the homologous mycolic acid methyltransferase, Hma, producing hydroxymethyl mycolic acids. The G236E CFAS mutant had less than 1% of the in vitro activity of the wild type enzyme. We expressed the G236E CFAS mutant in an E. coli (DE3) strain in which the chromosomal cfa gene had been deleted. After extraction of phospholipids and conversion into the corresponding fatty acid methyl esters (FAMEs), we observed the formation of cyclopropanated FAMEs suggesting that the mutant retained some of the normal activity in vivo. However, we also observed the formation of new C17 methyl-branched unsaturated FAMEs whose structures were determined using GC/MS and NMR analyses. The double bond was located at different positions 8, 9 or 10, and the methyl group at position 10 or 9. Thus, this new FAMEs are likely arising from a 16:1 acyl chain of a phospholipid that had been transformed by the G236E CFAS mutant in vivo. The reaction catalyzed by this G236E CFAS mutant thus starts by the methylation of the unsaturated acyl chain at position 10 or 9 yielding a carbocation at position 9 or 10 respectively. It follows then two competing steps, a normal cyclopropanation or hydride shift/elimination events giving different combinations of alkenes. This study not only provides further evidence that cyclopropane synthases (CSs) form a carbocationic intermediate but also opens the way to CSs engineering for the synthesis of non-natural fatty acids.     

Alternative Oils Tested as Feedstocks for Enzymatic FAMEs Synthesis: Toward a More Sustainable Process

Previously isolated and characterized Pseudomonas lipases were immobilized in a low‐cost MP‐1000 support by a re‐loading procedure that allowed a high activity per weight of support. Immobilized LipA, LipC, and LipCmut lipases, and commercial Novozym® 435 were tested for fatty acid methyl ester (FAMEs) synthesis using conventional and alternative feedstocks. Triolein and degummed soybean oils were used as model substrates, whereas waste cooking oil and M. circinelloides oil were assayed as alternative, low cost feedstocks, whose free fatty acid (FFA), and acylglyceride profile was characterized. The reaction conditions for FAMEs synthesis were initially established using degummed soybean oil, setting up the best water and methanol concentrations for optimum conversion. These conditions were further applied to the alternative feedstocks and the four lipases. The results revealed that Pseudomonas lipases were unable to use the FFAs, displaying a moderate FAMEs synthesis, whereas a 44% FAMEs production was obtained when M. circinelloides oil was used as a substrate in the reaction catalysed by Novozym® 435, used under the conditions established for degummed soybean oil. However, when Novozym® 435 was tested under previously described optimal conditions for this lipase, promising values of 85 and 76% FAMEs synthesis were obtained for waste cooking oil and M. circinelloides oil, respectively, which might result in promising, nonfood, alternative feedstocks for enzymatic biodiesel production. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1209–1217, 2017     

Triacylglyceride composition and fatty acyl saturation profile of a psychrophilic and psychrotolerant fungal species grown at different temperatures

Pseudogymnoascus destructans is a psychrophilic fungus that infects cutaneous tissues in cave dwelling bats, and it is the causal agent for white nose syndrome (WNS) in North American (NA) bat populations. Geomyces pannorum is a related psychrotolerant keratinolytic species that is rarely a pathogen of mammals. In this study, we grew P. destructans and G. pannorum in static liquid cultures at favourable and suboptimal temperatures to: 1) determine if triacylglyceride profiles are species-specific, and 2) determine if there are differences in fatty acyl (FA) saturation levels with respect to temperature. Total lipids isolated from both fungal spp. were separated by thin-layer chromatography and determined to be primarily sterols (∼15 %), free fatty acids (FFAs) (∼45 %), and triacylglycerides (TAGs) (∼50 %), with minor amounts of mono-/diacylglycerides and sterol esters. TAG compositions were profiled by matrix-assisted laser desorption–ionization time-of-flight mass spectrometry (MALDI–TOF). Total fatty acid methyl esters (FAMEs) and acyl lipid unsaturation levels were determined by gas chromatography–mass spectrometry (GC–MS). Pseudogymnoascus destructans produced higher proportions of unsaturated 18C fatty acids and TAGs than G. pannorum. Pseudogymnoascus destructans and G. pannorum produced up to a two-fold increase in 18:3 fatty acids at 5 °C than at higher temperatures. TAG proportion for P. destructans at upper and lower temperature growth limits was greater than 50 % of total dried mycelia mass. These results indicate fungal spp. alter acyl lipid unsaturation as a strategy to adapt to cold temperatures. Differences between their glycerolipid profiles also provide evidence for a different metabolic strategy to support psychrophilic growth, which may influence P. destructans' pathogenicity to bats.     

Evaluation of extraction methods for recovery of fatty acids from Botryococcus braunii LB 572 and Synechocystis sp. PCC 6803

Microalgae are a very diverse group of organisms that consist in both prokaryotic and eukaryotic forms. Some species of microalgae can be induced to overproduce particular fatty acids through simple manipulations of the physical and chemical properties of the culture medium. In this paper, the effect of different extraction techniques on the recovery of fatty acids from the freeze-dried biomass from two lipid-producing microalgal strains: Botryococcus braunii LB 572 (green algae) and Synechocystis sp. PCC 6803 (cyanobacteria) was examined. Five procedures were used: after conversion of the lipid material into the corresponding fatty acid methyl esters (FAMEs) via suitable derivatization reactions (extraction-transesterification) and direct transesterification of biomass to produce FAMEs (without the initial extraction step) that used differential types of catalysts and processing conditions. This study has shown that procedure 3, a one step practical procedure for lipid extraction and in situ methyl ester derivation could be used successfully for the determination of the fatty acid compositions of microalgae and cyanobacteria.