Anation kinetics of pentacyanoaquachromate(III) by thiocyanate and azide

The kinetics of the reaction of Cr(CN)₅(H₂O)²⁻ with NCS⁻ and were studied at pH 5.0 and at pH 6.3-7.0, respectively, as a function of the temperature between 25.0 and 55.0 °C, and at various ionic strengths. Anation occurs in competition with aquation of CN⁻, with rate constants that exhibit less-than-first-order dependence on the concentration of the entering anions. The results are interpreted in terms of ligand interchange in a context of association of the two reacting anions mediated by the Na⁺ or Ca²⁺ counterions. The degree of aggregation depends mainly on the total cationic charge rather than on the ionic strength, and is ca. 2-fold larger for than for NCS⁻. Within the associated species, is a better entering ligand than NCS⁻ by a factor of 4.5. The Cr(CN)₅(NCS)³⁻ and Cr(CN)₅(N₃)³⁻ complexes were also synthesized, and the rates of aquation of NCS⁻ and were measured at pH 5.0 and between 55.0 and 80.0 °C, over the same range of ionic strengths. The ionic strength enhances the anation rates but has little effect on the aquation rates. The average activation enthalpies of the interchange step are 80 ± 3 and 76 ± 3 kJ mol⁻¹ for entry of NCS⁻ and , respectively. Those of the corresponding aquation reactions are 94 ± 4 and 107 ± 4 kJ mol⁻¹. Within error limits, all ΔH^‡ values are independent of the ionic strength. The results are consistent with an I_d mechanism for substitution in Cr(CN)₅X^z− complexes.     

Kinetics and mechanism of the axial substitution reactions of (ligand)bis(4,5-dichloro-1,2-benzo semiquinonediiminato)cobalt(III) complexes

Square-pyramidal (Ph₃X)bis(4,5-dichloro-1,2-benzosemiquinonediiminato)cobalt(III) complexes (X = As, Sb or P) have been synthesized. The kinetics of axial substitution for the triphenylantimony complex have been studied for 10 entering ligands (L*). The reaction is of reversible second-order in both directions for all complexes. Labile behavior is indicated by the rate constants in the range from 6.33 × 10³ (for L* = Ph₃P in MeOH) to 5.4 (L* = py in CH₂Cl₂) M⁻¹ s⁻¹. The kinetics is consistent with an I_a mechanism. The log of the second-order rate constant for axial substitution is a linear function of nucleophilic reactivity n_Pt°, which is due to the trans-labilizing effect of the entering ligand in the six-coordinate transition state.     

Steric effects on the substitution of pentaamine-chromium(III) and -rhodium(III) complexes. Anation reaction rate constants as an indicative of the dissociative shift of the mechanism on crowding the [M(RNH2)5H2O] (M = Rh, R = H, Me, Et, Pr; M = Cr, R = H, Me, Pr) complexes

The kinetics of the anation reactions of [M(RNH₂)₅H₂O]³⁺ (M = Rh, R = H, Me, Et, Pr; M = Cr, R = H, Me, Pr) with several ligands (H₃PO₄/H₂PO₄⁻, H₃PO₃/H₂PO₃⁻, CF₃COO⁻, Br⁻, Cl⁻, SCN⁻) have been studied at different temperatures and acidities at I = 1.0 M (LiClO₄. Results obtained for the anation rate constants and thermal activation parameters are compared with the previously published data for R = H, in order to establish the effects of the amine substituents in the reaction mechanism proposed for the substitution reactions of these complexes. The results obtained are interpreted on the basis of a mechanism where the bond formation process is more important in the substitution on M = Cr complexes than in that of the M = Rh complexes, as already pointed out for the published ΔΛ^≠ values for the water exchange on these systems. A simple Langford-Gray classification becomes inadequate to describe these situations where the increase of the steric demand of the amine substituents shifta the I_a-I_d classification to the I_d side, although no dramatic changes in the reaction mechanism are found. It is concluded that a More O'Ferall ‘continuous’ type of approach to the mechanism classification of the substitution reactions is much more useful in this case.     

Ion-pair mechanism in square planar substitution. Reactivity of cationic platinum (II) complexes with negatively charged nucleophiles in solvents of high, medium and low polarity

The rates of displacement of dimethyl sulfoxide from the cation [Pt(phen) (CH₃) (Me₂SO)]⁺ by a series of uncharged and negatively charged nucleophiles have been measured in a methanol/water (19:1 vol./vol.) mixture. The starting complex and the reaction products were characterized either as solids or in solution by their IR and ¹H NMR spectra. The substitution reactions take place by way of a direct bimolecular attack of the ligand on the substrate. The sequence of reactivity observed is as expected on the basis of a nucleophilicity scale relevant for + 1 charged substrates ([Pt(en) (NH₃)Cl]⁺ used as standard). The difference of reactivity between the first (t-BuNH₂) and the last (SeCN⁻) members of the series spans five orders of magnitude. The value measured for the nucleophilic discrimination (1.55) is the highest found so far for cationic substrates. This is a result of the easy transfer of some of the electron density brought in by the incoming ligand into the ancillary ligands. When the reaction is carried out in a series of protic and dipolar aprotic solvents, using chloride ion as nucleophile, the rate of formation of [Pt (phen) (CH₃)Cl] is dominated by the extent of solvation of Cl⁻, as measured by its values of the Gibbs molar energy of transfer Δ_tG⁰. Conductivity measurements at 25°C in dichloromethane were fitted to the Fuoss equation and the values of the dissociation constants K_d for the ion pairs were calculated as follows: 2.27 × 10⁻⁵ M for Bu₄NCl, 2.75 × 10⁻⁵ M for Bu₄NSCN and 17.05 × 10⁻⁵ M for [Pt(phen) (CH₃) (Me₂SO)]PF₆. The pseudo-first-order rate constants k_obs for the reactions with Bu₄NCl, Bu₄NBr, Bu₄NSCN and Bu₄NI showed a curvilinear dependence on the concentration of the salt which levels off very soon (at concentrations higher than 0.005 M the kinetics are zero order in [Bu₄NX]). On addition of the inert electrolyte Bu₄NPF₆ the rates slow down and the kinetics follow the rate law k_obs = kK_ip[Bu₄NX]/[Bu₄NPF₆] + K_ip[Bu₄NX]). These findings fit well with a reaction scheme which involves a pre-equilibrium K_ip between ion pairs, followed by unimolecular substitution within the contact ion pair [Pt(phen) (CH₃) (Me₂SO)X]_ip. Values of the equilibrium constants K_ip for ion-pair exchange and of the internal substitution rates k were derived. The latter showed that the discrimination in reactivity between Cl⁻, Br⁻, SCN⁻ and I⁻ is greatly reduced with respect to aqueous solutions. The reason behind this may be desolvation of the ions coupled to the fact that a contact ion pair is already at a certain distance along the reaction coordinate in the direction of the transition state. Applications of the special salt effect and of ion pairing to synthesis are discussed.     

Kinetics and mechanism of the oxidation of ammineruthenium(II) complexes by bromine

The reactions of Ru(NH₃)₅py²⁺, Ru(NH₃)₄bpy²⁺, Ru₂(NH₃)₁₀pz⁵⁺, RuRh(NH₃)₁₀pz⁵⁺ and Ru(NH₃)₅pz²⁺ with bromine are first-order in ruthenium and first-order in bromine. The rates decrease with increasing bromide ion concentration and, except for Ru(NH₃)₅pz²⁺, are independent of hydrogen ion concentration. The reactions are postulated to proceed via outer-sphere, one-electron transfer from Ru(II) to Br₂ with the formation of Br₂⁻ as a reactive intermediate. The bromide inhibition is ascribed to the formation of Br₃⁻ which is unreactive in outer-sphere reactions because of the barrier imposed by the need to undergo reductive cleavage. The reaction of Ru(NH₃)₅pz²⁺ is inhibited by hydrogen ions. The hydrogen ion dependence shows that Ru(NH₃)₅pzH³⁺ has a pK_a of 2.49 and is at least 500 times less reactive than Ru(NH₃)₅pz²⁺. The reaction of Ru₂(NH₃)₁₀pz⁴⁺ with bromine is biphasic. The second phase has a rate identical to that of the Ru₂(NH₃)₁₀pz⁵⁺-Br₂ reaction. A detailed analysis shows that the reaction of Ru₂(NH₃)₁₀pz⁴⁺ with bromine proceeds by a sequence of one-electron steps, Br₂⁻ being produced as an intermediate. A linear free energy relationship between rate constants and equilibrium constants, obeyed for all the reactions studied, provides an estimate of 1.5 × 10² M⁻¹ s⁻¹ for the self-exchange rate constant of the Br₂/Br₂⁻ couple.     

Pressure effects on the rates of Hg-assisted chloride release from some [CrCl(diamine)(triamine)] complexes

The rate of Hg²⁺-assisted chloride release from several mer-[CrCl(diamine)(triamine)]²⁺ complexes has been measured as a function of pressure, Hg²⁺ concentration and temperature. The calculated activation volumes are independent of [Hg²⁺] and temperature and kinetic parametes 10⁴ k_Hg (25 °c) (M⁻¹ s⁻¹), ΔH^‡ (kJ mol⁻¹), ΔS^‡ (J K⁻¹ mol⁻¹), ΔV^‡ (cc mol⁻¹) are: (en)(dpt): 6.44. 75.5, −52, −5.0; (ibn)(dpt): 5.81, 89.5, −6, −0.03; (Me₂tn)(dpt): 22.2, 84.9, −11, −0.5; (tn)(dpt): 29.1, 87, −1, +0.3; (en)(2,3-tri): 1.94, 87.0, −24, −5.7; (en)(Medpt): 0.417, 94.6, −11, −0.8; (tn)(Medpt): 9.14, 98.3, +26, +1.8.     

The high-energy intraconfigurational spin-forbidden bands in the spectra of quadrate chromium(III) complexes

The high-energy intraconfigurational spin-forbidden bands expected in the region of 20 000 cm⁻¹ have been uncovered in the spectra of a number of trans-diacidobis(ethylenediamine) chromium(III)complexes. These bands have been fitted to the quadrate components of the cubic transition ⁴A_2g → ²T_2g including spin-orbit interaction. Two interconfigurational spin-forbidden bands in the spectrum of trans-[Cr(en)₂(dmf)₂](ClO₄)₃ have been uncovered and interpretted.     

Synthesis and characterization of tris(heteroleptic) diimine complexes of chromium(III)

A preparative procedure of potentially wide applicability is described for the synthesis of previously unreported tris(heteroleptic) [Cr(diimine)₃]³⁺ complexes. The synthetic scheme involves the sequential addition of three different diimine ligands, and employs CrCl₃ · 6H₂O as the initial Cr(III) reagent. The synthesis and characterization of the complexes [Cr(TMP)(phen)(diimine′)]³⁺ are reported (where TMP = 3,4,7,8-tetramethyl-1,10-phenanthroline, phen = 1,10-phenanthroline; and diimine′ is either bpy = 2,2′-bipyridine, Me₂bpy = 4,4′-dimethyl-2,2′-bipyridine, 5-Clphen = 5-chloro-1,10-phenanthroline, or DPPZ = dipyridophenazine). Chiral capillary electrophoresis and electrospray mass spectrometry were essential aids in determining the presence or absence of diimine ligand scrambling. Utilizing emission and electrochemical data obtained on these compounds, the oxidizing power of the lowest lying excited state (²E_g(O_h)) was calculated, and was found to vary in a systematic fashion with diimine ligand type.     

Intramolecular protonation and other mechanisms for substitution reactions of hydrido(thiolato) — and di(thiolato)-ruthenium(II) phosphine complexes

Reactions of cct-RuH(SR)(CO)₂(PPh₃)₂ (1) (cct = cis, cis, trans) with R′SH provide cct-RuH(SR′)(CO)₂(PPh₃)₂ (R = alkyl, aryl): based on described kinetic data, the proposed mechanism involves PPh₃ loss, coordination of R′SH, intramolecular protonation of RS⁻ by R′SH, and RSH elimination. The intramolecular protonation step circumvents a potentially slow RSH reductive elimination step. A similar mechanism is proposed for the thiol exchange reactions of cct-Ru(SR)₂(CO)₂(PPh₃)₂ (2). A corresponding dissociative mechanism is also proposed for the reaction of 1 with P(p-tolyl)₃, which gives cct-RuH(SR)(CO)₂(PPh₃)(P(p-tolyl)₃) and cct-RuH(SR)(CO)_2⁻ (P(p-tolyl)₃)₂. Other reactions described include the reactions of 1 with H₂, CO, HCl and PPh₃, and the reactions of 2 with P(p-tolyl)₃ and H₂. Exposure to light causes 2 to dimerize in solution.     

Substitution kinetics of tetracarbonyl(η-alkene)ruthenium complexes: ALKENE = ethene and methyl acrylate

The kinetics in heptane of displacement of the alkene ligands ethene and methyl acrylate from Ru(CO)₄(η²-alkene) by P(OEt)₃ have been measured. The reactions occur by reversible dissociation of the alkenes, and activation parameters are compared with those for dissociation of CO from Ru(CO)₅ and for reactions of the corresponding Os complexes. A linear free energy relationship for ligand dissociation from Ru(CO)₅, Ru(CO)₄(C₂H₄) and Ru(CO)₄(MA) has a gradient close to unity, indicating virtually complete bond breaking in the transition states. Competition parameters for reactions of what is probably a solvated Ru(CO)₄S intermediate have been measured for the alkenes and P(OEt)₃, and for eleven other P-donor nucleophiles. Correlations with the electronic and steric properties of the P-donors show negligible dependence on the electron donicity of the nucleophiles and a small but significant dependence on their sizes. The sizes were quantified by Tolman cone angles or by ‘cone angle equivalents’ derived directly from Brown's ligand repulsion energies (E_r). These correlations compared with those, reported elsewhere, for reactions of the probably solvated intermediates Co₂(CO)₅(μ²-C₂Ph₂) and H₃Re₃(CO)₁₁ formed by ligand dissociative processes. In all cases the discrimination between nucleophiles by the intermediates is weak confirming their high reactivity and the borderline nature of the mechanisms of these bimolecular reactions between I_d and I_a.     

The kinetics of the anation reaction of aquopentaamminecobalt(III) by acetate in aqueous acidic solution

The anation reaction of aquopentaamminecobalt(III) by acetate has been studied in the temperature range 60–80°C and acidity range 1.0 ≦ pH ≦ 5.5 for total acetate concentrations ≦ 0.5 M and at ionic strength 1.0 M. The anation by acetic acid follows second-order kinetics (k₀), whereas the kinetic results for the anation by acetate (Q₁, k₁) provide evidence for the formation of an ion-pair with the complex ion. Typical experimental results at 70°C are k₀ = 5.33 X 10⁻⁵ M⁻¹ sec⁻¹, Q₁ = 5.87 M⁻¹ and k₁ = 1.46 X 10⁻⁴sec⁻¹. The activation parameters for the different reaction paths are reported and the results discussed with reference to various other anation reactions of Co(III) complexes.     

Five- and six-coordinate hydridorhodium(III) complexes containing metalated Schiff-bases as ligands

The reactions of either [RhCl(C₈H₁₄)₂]₂ (2) or [RhCl(C₂H₄)₂]₂ (3) with Schiff-bases 1a-d derived from 2-aminopyridine afford, in the presence of four equivalents of PiPr₃, the octahedral chloro(hydrido)rhodium(III) complexes [{(C₅H₄N)NC(C₆H₄R)}RhHCl(PiPr₃)₂] (4a-d) in which the metalated Schiff-base behaves as a chelating ligand. Treatment of 4a (RH) with NaI and CF₃SO₃Tl produce the corresponding derivatives [{(C₅H₄N)NC(C₆H₅)}RhHX(PiPr₃)₂] (5, 6) by salt metathesis. The triflato compound 6 reacts with nBu₄NF · xH₂O to give [{(C₅H₄N)NC(C₆H₅)}RhHF(PiPr₃)₂] (7). While attempts to eliminate HCl from 4a failed, the reaction of 4a with AgPF₆ generates the five-coordinate cationic complex [{(C₅H₄N)NC(C₆H₅)}RhH(PiPr₃)₂]PF₆ (8) which adds one equivalent of acetonitrile to give [{(C₅H₄N)NC(C₆H₅)}RhH(NCCH₃)(PiPr₃)₂]PF₆ (9). Treatment of 4a with either nBu₂Mg or LiAlH₄ affords the dihydridorhodium(III) compound [{(C₅H₄N)NC(C₆H₅)}RhH₂(PiPr₃)₂] (10) being also accessible from 8 and nBu₂Mg.     

Polynuclear chromium(III) carboxylates. 3. Cyclic and cubane type hexachromium acetates

Heating an aqueous solution of the trinuclear ‘basic’ chromium(III) acetate led to the formation of several products which were separated by ion-exchange chromatography. Crystals of a new cyclic, hexanuclear Cr(III) compound, [Cr₆(OH)₁₀(O₂CCH₃)₆(H₂O)₄]Cl₂·13H₂O (3·Cl₂·13H₂O) were obtained upon elution of the violet complex 3 with 0.5 M NaCl and slow evaporation of the eluent. The six chromium atoms in complex 3 form an almost planar, irregular hexagon with an overall symmetry close to C_2h. By heating solid ‘basic’ chromium(III) acetate at 300 °C, followed by ion-exchange separation, a new hexanuclear complex, [Cr₆O₃(OH)(O₂CCH₃)₉(H₂O)₄]²⁺ (4) has been obtained. Complex 4 has a {Cr₆O₄} core, which consists of a {Cr₄O₄} cubane type inner core with two external chromium centers attached to μ₄-oxo(cube) ligands. A similar procedure, using ‘basic’ chromium(III) propionate led to the isolation of the dodecanuclear complex [Cr₁₂O₈(O₂CCH₂CH₃)₁₆(H₂O)₈]⁴⁺ (5) which has a {Cr₁₂O₈} core. The {Cr₆O₄} core in complex 4 can be regarded to be formed from a tetranuclear {Cr₄O₂} butterfly unit and a dinuclear {Cr₂O₂} unit. Similarly, the {Cr₁₂O₈} core in 5 can be considered to be constructed from two orthogonal {Cr₆O₄} units as in complex 4.     

Reactivity difference between protolytic forms of some macrocyclic chromium(III) complexes in ligand substitution and electron transfer processes

The review provides insight into the mechanism of ligand substitution and electron transfer (from chromium(III) to iron(III)) by comparison of the reactivity of some tetraazamacrocyclic chromium(III) complexes in the conjugate acid-base forms. Use of two geometrical isomers made possible to estimate the influence of geometry and protolytic reactions in trans and cis position towards the leaving group on the rate enhancement. Studies on the reaction rates in different media demonstrated the role played by outer sphere interactions in a monodentate ligand substitution.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

Synthesis, characterization and photophysical properties of mixed ligand tris(polypyridyl)chromium(III) complexes, [Cr(phen)2L]

A series of new heteroleptic, tris(polypyridyl)chromium(III) complexes, [Cr(phen)₂L]³⁺ (L = substituted phenanthrolines or bipyridines), has been prepared and characterized, and their photophyical properties in a number of solvents have been investigated. X-ray crystallography measurements confirmed that the cationic (3+) units contain only one ligand L plus two phenanthroline ligands. Electrochemical and photophysical data showed that both ground state potentials and lifetime decays are sensitive to ligand structure and the nature of the solvent with the exception of compounds containing L = 5-amino-1,10-phenanthroline (aphen) and 2,2′-bipyrimidine (bpm). Addition of electron-donating groups in the ligand structure shifts redox potentials to more negative values than those observed for the parent compound, [Cr(phen)₃]³⁺. Emission decays show a complex dependence with the solvent. The longest lifetime was observed for [Cr(phen)₂(dip)]³⁺ (dip = 4,7-diphenylphenanthroline) in air-free aqueous solutions, τ = 273 μs. Solvent effects are explained in terms of the affinity of hydrophobic complexes for non-polar solvent molecules and the solvent microstructure surrounding chromium units.     

Adsorption of chromium (VI) ion from aqueous solution by succinylated mercerized cellulose functionalized with quaternary ammonium groups

Succinylated mercerized cellulose (cell 1) was used to synthesize an anion exchange resin. Cell 1, containing carboxylic acid groups was reacted with triethylenetetramine to introduce amine functionality to this material to obtain cell 2. Cell 2 was reacted with methyl-iodide to quaternize the amine groups from this material to obtain cell 3. Cells 2 and 3 were characterized by mass percent gain, degree of amination and quaternization, FTIR and CHN. Cells 2 and 3 showed degrees of amination and quaternization of 2.8 and 0.9 mmol/g and nitrogen content of 6.07% and 2.13%, respectively. Cell 3 was used for Cr (VI) adsorption studies. Adsorption equilibrium time and optimum pH for Cr (VI) adsorption were found to be 300 min and 3.1, respectively. The Langmuir isotherm was used to model adsorption equilibrium data. The adsorption capacity of cell 3 was found to be 0.829 mmol/g. Kinetic studies showed that the rate of adsorption of Cr (VI) on cell 3 obeyed a pseudo-second-order kinetic model.     

Leaving group effects on ligand substitution reactions of pentacyanoferrate(II) complexes: rate constant and activation volume correlations

The kinetics of the reaction of cyanide ions with pentacyanoferrate(II) complexes have been studied spectrophotometrically at pressures of 1 bar and up to 1 kbar, at 298.2 K. An excess of cyanide ions was employed and first-order kinetics were observed both in aqueous solution and in aqueous-mono-ol mixtures. For several pyridine derivative leaving groups, neutral or mono-positively charged, the rate constant variation in aqueous medium is only over one half-order of magnitude, although thiourea and quinoxaline are much more labile, dissociating with rate constants about ten and three hundred times greater than this range, respectively. Very modest changes in rate constant are observed upon addition of 40% methanol, and in a few examples studied, kinetic differences become significant only in cosolvent-rich mixtures. Volumes of activation, Δ V^*, are all positive, for reaction in water, confirming the expected bond extension of the leaving group in a D mechanism. Solvation changes and ligand differences do not wholly explain the variation in Δ V^* values, or the changes in this parameter found when cosolvents are added. Reasonably good correlations are found for the logarithms of rate constants both with the pK_a of the ligand and with Δ V^*. Other potential correlations of the leaving group property and kinetic parameter are discussed.     

The solvent-initiated photochemistry of tris(N,N-diethyldithiocarbamato)iron(III)

The photolysis of [Fe(Et₂dtc)₃], Et₂dtc = diethyldithiocarbamate to yield [Fe(Et₂dtc)₂Cl] proceeds under 313 nm irradiation through a metal complex excited state, as expected. Under 254 nm irradiation, however, the dominant pathway is through a solvent-initiated reaction in which radicals formed after absorption of light by CHCl₃ react thermally with [Fe(Et₂dtc)₃]. The initial rate varies linearly with the light intensity at 313 nm, but at 254 nm varies with the square root of the intensity.     

Iron(III), chromium(III) and cobalt(II) complexes with squarate: Synthesis, crystal structure and magnetic properties

The preparation and variable temperature-magnetic investigation of three squarate-containing complexes of formula [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (1) [Cr₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (2) and [Co(C₄O₄)(H₂O)₄]_n (3) [H₂C₄O₄ = 3.4-dihydroxycyclobutene-1,2-dione (squaric acid)] together with the crystal structures of 1 and 3 are reported. Complex 1 contains discrete centrosymmetric [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄] diiron(II) units where the iron pairs are joined by a di-μ-hydroxo bridge and two squarate ligands acting as bridging groups through adjacent oxygen atoms. Two coordinated water molecules in cis position complete the octahedral environment at each iron atom in 1. The iron-iron distance with the dinuclear unit is 3.0722(6) Å and the angle at the hydroxo bridge is 99.99(7)°, values which compare well with the corresponding ones in the isostructural compound 2 (2.998 Å and 99.47°) whose structure was reported previously. The crystal structure of 3 contains neutral chains of squarato-O¹,O³-bridged cobalt(II) ions where four coordinated water molecules complete the six-coordination at each cobalt atom. The cobalt-cobalt separation across the squarate bridge is 8.0595(4) Å. A relatively important intramolecular antiferromagnetic coupling occurs in 1 whereas it is very weak in 2, the exchange pathway being the same [J = −14.4 (1) and −0.07 cm⁻¹ (2), the spin Hamiltonian being defined as ]. A weak intrachain antiferromagnetic interaction between the high-spin cobalt(II) ions occurs in 3 (J = −0.30 cm⁻¹). The magnitude and nature of these magnetic interactions are discussed in the light of their respective structures and they are compared with those reported for related systems.