The effect of hamstring muscle compensation for anterior laxity in the ACL-deficient knee during gait

The hamstring muscles have been recognized as an important element in compensating for the loss of stability in the ACL-deficient knee, but it is still not clear whether the hamstring muscle force can completely compensate for the loss of ACL, and the consequences of increased hamstring muscle force. A two-dimensional anatomical knee model in the sagittal plane was developed to examine the effect of various levels of hamstring muscle activation on restraining anterior tibial translation in the ACL-deficient knee during level walking. The model included the tibiofemoral and patellofemoral joints, four major ligaments, the medial capsule, and five muscle units surrounding the knee. Simulations were conducted to determine anterior tibial translation and internal joint loading at a single selected position when the knee was under a peak external flexion moment during early stance phase of gait. Incremental hamstring muscle forces were applied to the modeled normal and the ACL-deficient knees. Results of simulations showed that the ACL injury increased the anterior tibial translation by 11.8mm, while 56% of the maximal hamstring muscle force could reduce the anterior translation of the tibia to a normal level during the stance phase of gait. The consequences of increased hamstring muscle force included increased quadriceps muscle force and joint contact force.     

Role of gastrocnemius activation in knee joint biomechanics: gastrocnemius acts as an ACL antagonist

Gastrocnemius is a premier muscle crossing the knee, but its role in knee biomechanics and on the anterior cruciate ligament (ACL) remains less clear when compared to hamstrings and quadriceps. The effect of changes in gastrocnemius force at late stance when it peaks on the knee joint response and ACL force was initially investigated using a lower extremity musculoskeletal model driven by gait kinematics—kinetics. The tibiofemoral joint under isolated isometric contraction of gastrocnemius was subsequently analyzed at different force levels and flexion angles (0°–90°). Changes in gastrocnemius force at late stance markedly influenced hamstrings forces. Gastrocnemius acted as ACL antagonist by substantially increasing its force. Simulations under isolated contraction of gastrocnemius confirmed this role at all flexion angles, in particular, at extreme knee flexion angles (0° and 90°). Constraint on varus/valgus rotations substantially decreased this effect. Although hamstrings and gastrocnemius are both knee joint flexors, they play opposite roles in respectively protecting or loading ACL. Although the quadriceps is also recognized as antagonist of ACL, at larger joint flexion and in contrast to quadriceps, activity in gastrocnemius substantially increased ACL forces (anteromedial bundle). The fact that gastrocnemius is an antagonist of ACL should help in effective prevention and management of ACL injuries.     

3-D anatomically based dynamic modeling of the human knee to include tibio-femoral and patello-femoral joints

An anatomical dynamic model consisting of three body segments, femur, tibia and patella, has been developed in order to determine the three-dimensional dynamic response of the human knee. Deformable contact was allowed at all articular surfaces, which were mathematically represented using Coons' bicubic surface patches. Nonlinear elastic springs were used to model all ligamentous structures. Two joint coordinate systems were employed to describe the six-degrees-of-freedom tibio-femoral (TF) and patello-femoral (PF) joint motions using twelve kinematic parameters. Two versions of the model were developed to account for wrapping and nonwrapping of the quadriceps tendon around the femur. Model equations consist of twelve nonlinear second-order ordinary differential equations coupled with nonlinear algebraic constraint equations resulting in a Differential-Algebraic Equations (DAE) system that was solved using the Differential/Algebraic System Solver (DASSL) developed at Lawrence Livermore National Laboratory. Model calculations were performed to simulate the knee extension exercise by applying non-linear forcing functions to the quadriceps tendon. Under the conditions tested, both "screw home mechanism" and patellar flexion lagging were predicted. Throughout the entire range of motion, the medial component of the TF contact force was found to be larger than the lateral one while the lateral component of the PF contact force was found to be larger than the medial one. The anterior and posterior fibers of both anterior and posterior cruciate ligaments, ACL and PCL, respectively, had opposite force patterns: the posterior fibers were most taut at full extension while the anterior fibers were most taut near 90 degrees of flexion. The ACL was found to carry a larger total force than the PCL at full extension, while the PCL carried a larger total force than the ACL in the range of 75 degrees to 90 degrees of flexion.     

Comparison of ACL strain estimated via a data-driven model with in vitro measurements

Computer modeling and simulation techniques have been increasingly used to investigate anterior cruciate ligament (ACL) loading during dynamic activities in an attempt to improve our understanding of injury mechanisms and development of injury prevention programs. However, the accuracy of many of these models remains unknown and thus the purpose of this study was to compare estimates of ACL strain from a previously developed three-dimensional, data-driven model with those obtained via in vitro measurements. ACL strain was measured as the knee was cycled from approximately 10° to 120° of flexion at 20 deg s^?1 with static loads of 100, 50, and 50 N applied to the quadriceps, biceps femoris and medial hamstrings (semimembranosus and semitendinosus) tendons, respectively. A two segment, five-degree-of-freedom musculoskeletal knee model was then scaled to match the cadaver’s anthropometry and in silico ACL strains were then determined based on the knee joint kinematics and moments of force. Maximum and minimum ACL strains estimated in silico were within 0.2 and 0.42% of that measured in vitro, respectively. Additionally, the model estimated ACL strain with a bias (mean difference) of ?0.03% and dynamic accuracy (rms error) of 0.36% across the flexion-extension cycle. These preliminary results suggest that the proposed model was capable of estimating ACL strains during a simple flexion-extension cycle. Future studies should validate the model under more dynamic conditions with variable muscle loading. This model could then be used to estimate ACL strains during dynamic sporting activities where ACL injuries are more common.     

Muscle activity in the leg is tuned in response to impact force characteristics

Based on results from quasi-static experiments, it has been suggested that the lower extremity muscle activity is adjusted in reaction to impact forces with the goal of minimizing soft-tissue vibrations. It is not known whether a similar muscle tuning occurs during dynamic activities. Thus, the purpose of this study was to determine the effect of changes in the input signal on (a) vibrations of lower extremity soft-tissue packages and (b) EMG activity of related muscles during heel-toe running. Subjects performed heel-toe running in five different shoe conditions. Ground reaction forces were measured with a KISTLER force platform, soft-tissue vibrations were measured with tri-axial accelerometers and muscle activity was measured using surface EMG from the quadriceps, hamstrings, tibialis anterior and triceps surae groups from 10 subjects. By changing both the speed of running and the shoe midsole material the impact force characteristics were changed. There was no effect of changes in the input signal on the soft-tissue peak acceleration following impact. A significant correlation (R2=0.819) between the EMG pre-activation intensity and the impact loading rate changes was found for the quadriceps. In addition, the input frequency was shown to approach the vibration frequency of the quadriceps. This evidence supports the proposed paradigm that muscle activity is tuned to impact force characteristics to control the soft-tissue vibrations.     

The influence of deceleration forces on ACL strain during single-leg landing: a simulation study

Anterior cruciate ligament (ACL) injury commonly occurs during single limb landing or stopping from a run, yet the conditions that influence ACL strain are not well understood. The purpose of this study was to develop, test and apply a 3D specimen-specific dynamic simulation model of the knee designed to evaluate the influence of deceleration forces during running to a stop (single-leg landing) on ACL strain. This work tested the conceptual development of the model by simulating a physical experiment that provided direct measurements of ACL strain during vertical impact loading (peak value 1294N) with the leg near full extension. The properties of the soft tissue structures were estimated by simulating previous experiments described in the literature. A key element of the model was obtaining precise anatomy from segmented MR images of the soft tissue structures and articular geometry for the tibiofemoral and patellofemoral joints of the knee used in the cadaver experiment. The model predictions were correlated (Pearson correlation coefficient 0.889) to the temporal and amplitude characteristic of the experimental strains. The simulation model was then used to test the balance between ACL strain produced by quadriceps contraction and the reductions in ACL strain associated with the posterior braking force. When posterior forces that replicated in vivo conditions were applied, the peak ACL strain was reduced. These results suggest that the typical deceleration force that occurs during running to a single limb landing can substantially reduce the strain in the ACL relative to conditions associated with an isolated single limb landing from a vertical jump.     

Computational biomechanics of knee joint in open kinetic chain extension exercises

Open kinetic chain (OKC) extension exercises are commonly performed to strengthen quadriceps muscles and restore joint function in performance enhancement programs, in exercise therapies and following joint reconstruction. Using a validated 3D nonlinear finite element model, the detailed biomechanics of the entire joint in OKC extension exercises are investigated at 0, 30, 60 and 90 degrees joint angles. Two loading cases are simulated; one with only the weight of the leg and the foot while the second considers also a moderate resistant force of 30 N acting at the ankle perpendicular to the tibia. The presence of the 30 N markedly influences the results both in terms of the magnitude and the trend. The resistant load substantially increases the required quadriceps, patellar tendon, cruciate ligaments and joint contact forces, especially at near 90 degrees angles with the exception of ACL force that is increased at 0 degrees angle. At post-ACL reconstruction period or in the joint with ACL injury, the exercise should preferably be avoided at near full extension positions under large resistant forces.     

A modeling study of partial ACL injury: simulated KT-2000 arthrometer tests

A partial ACL injury may involve different levels of fiber disruption, orfibers may sustain microscopic changes in their structure without gross disruption, resulting in a change in ligament function. The effect of partial ACL tears on the mechanical and functional stability of the knee has not been well documented, in part because of diagnostic difficulties. A computer model of the knee in the sagittal plane was used in this study to simulate tests using the KT-2000 Knee Arthrometer, which quantifies Lachman's test for ACL injury. A variety of partial ACL anterior and posterior bundle injuries were simulated. Anterior and posterior bundle injuries were subdivided into four different simulated injury levels: mild (one-half tear of the bundle), moderate (complete tear of the bundle), severe (complete tear of the bundle and tear of one-half of the other bundle), and more severe (severe injury plus an additional elongation of the other bundle represented by 5% increases of its initial strain). Force-displacement results obtained from simulated KT-2000 knee arthrometer tests depended on the level of injury. Mild and moderate injuries produced only small change in the anterior tibial translation--at different force levels. Severe injury produced increased anterior tibial translation depending on which bundle was completely ruptured. The compliance index defined as the ratio of the displacement and the force within 68 N and 90 N anterior drawer forces, the stiffness, and the rate of change of stiffness of the anterior force-displacement were found to be better at predicting partial ACL ruptures than simple differences in anterior tibial translation. It was possible in the model results to discriminate knees with various levels of partial ACL injuries using the first and second derivatives of the force-displacement curve.     

Elevated gastrocnemius forces compensate for decreased hamstrings forces during the weight-acceptance phase of single-leg jump landing: implications for anterior cruciate ligament injury risk

Approximately 320,000 anterior cruciate ligament (ACL) injuries in the United States each year are non-contact injuries, with many occurring during a single-leg jump landing. To reduce ACL injury risk, one option is to improve muscle strength and/or the activation of muscles crossing the knee under elevated external loading. This study?s purpose was to characterize the relative force production of the muscles supporting the knee during the weight-acceptance (WA) phase of single-leg jump landing and investigate the gastrocnemii forces compared to the hamstrings forces. Amateur male Western Australian Rules Football players completed a single-leg jump landing protocol and six participants were randomly chosen for further modeling and simulation. A three-dimensional, 14-segment, 37 degree-of-freedom, 92 muscle-tendon actuated model was created for each participant in OpenSim. Computed muscle control was used to generate 12 muscle-driven simulations, 2 trials per participant, of the WA phase of single-leg jump landing. A one-way ANOVA and Tukey post-hoc analysis showed both the quadriceps and gastrocnemii muscle force estimates were significantly greater than the hamstrings (p<0.001). Elevated gastrocnemii forces corresponded with increased joint compression and lower ACL forces. The elevated quadriceps and gastrocnemii forces during landing may represent a generalized muscle strategy to increase knee joint stiffness, protecting the knee and ACL from external knee loading and injury risk. These results contribute to our understanding of how muscle?s function during single-leg jump landing and should serve as the foundation for novel muscle-targeted training intervention programs aimed to reduce ACL injuries in sport.     

Strain inhomogeneity in the anterior cruciate ligament under application of external and muscular loads.

To determine whether mathematical relations between strains in different bundles and loads would be needed to predict injury of the anterior cruciate ligament (ACL), this work tested the hypothesis that strains developed in two bundles of the ACL were significantly different under the application of a number of loads important to injury etiology of the ACL. To provide the data for testing this hypothesis, liquid mercury strain gages were installed on both the anteromedial (AMB) and posterolateral (PLB) bundles of the ACL of ten specimens, which were then subjected to passive flexion/extension, hyperextension moment, anterior force, internal and external axial moments, quadriceps, and hamstrings forces. Various combinations of these loads were also applied. Flexion angles ranged from 8 deg of hyperextension through 120 deg of flexion. The data were analyzed using a repeated measures analysis of variance. The analyses indicated that significant strain differences existed between the two bundles only for passive flexion/extension. However, the analyses did not support the hypothesis that AMB and PLB strains are significantly different from each other under the application of external and muscular loads. Because noticeable differences (> 3 percent) between bundle strains did exist in some load cases for limited ranges of flexion and the PLB strain was consistently higher than the AMB strain, it may be sufficient to consider strain in only the PLB when predicting ligament damage based on strain-load relations.     

Sex differences in muscle activation patterns associated with anterior cruciate ligament injury during landing and cutting tasks: A systematic review

Neuromuscular control is critical for maintaining dynamic joint stability and mitigating the risk of anterior cruciate ligament (ACL) injury. Given the increased risk of ACL injury in females, sex-based differential muscle activation strategies are often associated with this risk. For example, the quadriceps-dominant muscle activation strategy sometimes observed in females has been discussed as a cause of their increased risk of ACL injury. However, there has been no synthesised knowledge on sex differences in muscle activation patterns associated with ACL injuries. Therefore, the purpose of this review was to synthesise sex differences in muscle activation patterns in movements associated with ACL injuries in both adult and adolescent populations. A systematic electronic database search was conducted. Thirty studies were included in the review. Females demonstrated higher pre- and post-landing activation of the quadriceps and lower activation of the hamstrings in 15 studies. Females also had higher quadriceps-to-hamstring co-contraction ratios during pre- and post-landing phases compared to their male counterparts in 4 of 9 studies that considered co-contraction. While some studies supported the quadriceps-dominant activation strategies in females, no consensus can be drawn due to methodological inconsistencies and limitations. Also, despite the importance of ACL injury prevention in children and adolescents, the evidence on sex difference in muscle activation patterns in this population is insufficient to draw meaningful conclusions.     

The effects of gender on quadriceps muscle activation strategies during a maneuver that mimics a high ACL injury risk position.

While the increased incidence of serious knee injuries in female athletes is well established, the underlying neuromuscular mechanisms related to the elevated ACL injury rate has yet to be delineated. Video analysis of ACL injury during competitive sports play indicates a common body position associated with non-contact ACL injury; the tibia is externally rotated, the knee is close to full extension, the foot is planted and as the limb is decelerated it collapses into valgus. The purpose of the current prospective study was to evaluate gender differences in quadriceps muscle activation strategies when performing a physically challenging, but reproducible maneuver that mimics the high ACL injury risk position (in the absence of high velocity and high loads). Twenty physically active college-aged subjects (10 male and 10 female) performed multiple sets of the prescribed exercise. EMG recordings were employed to measure the ratio of activation between the medial and lateral quadriceps during the 4, 8, 12, 16, and 20th sets of exercise. Females demonstrated decreased RMS medial-to-lateral quadriceps ratios compared to males (F(1,18)=5.88, p=0.026). There was no main effect of set number on RMS quadriceps ratio (p>0.05). The results of this study suggest that females utilize neuromuscular activation strategies which may contribute to "dynamic valgus" and ACL rupture when performing high-risk maneuvers.     

An integrated approach to change the outcome part I: neuromuscular screening methods to identify high ACL injury risk athletes

An important step for treatment of a particular injury etiology is the appropriate application of a treatment targeted to the population at risk. An anterior cruciate ligament (ACL) injury risk algorithm has been defined that employs field-based techniques in lieu of laboratory-based motion analysis systems to identify athletes with high ACL injury risk landing strategies. The resultant field-based assessment techniques, in combination with the developed prediction algorithm, allow for low-cost identification of athletes who may be at increased risk of sustaining ACL injury. The combined simplicity and accuracy of the field-based tool facilitate its use to identify specific factors that may increase risk of injury in female athletes. The purpose of this report is to demonstrate novel algorithmic techniques to accurately capture and analyze measures of knee valgus motion, knee flexion range of motion, body mass, tibia length and quadriceps to hamstrings ratio with video analysis software typically used by coaches, strength and conditioning specialists, and athletic trainers. The field-based measurements and software analyses were used in a prediction algorithm to identify those at potential risk of noncontact ACL injury that may directly benefit from neuromuscular training.     

Fatigue injury risk in anterior cruciate ligament of target side knee during golf swing

A golf-related ACL injury can be linked with excessive golf play or practice because such over-use by repetitive golf swing motions can increase damage accumulation to the ACL bundles. In this study, joint angular rotations, forces, and moments, as well as the forces and strains on the ACL of the target-side knee joint, were investigated for ten professional golfers using the multi-body lower extremity model. The fatigue life of the ACL was also predicted by assuming the estimated ACL force as a cyclic load. The ACL force and strain reached their maximum values within a short time just after ball-impact in the follow-through phase. The smaller knee flexion, higher internal tibial rotation, increase of the joint compressive force and knee abduction moment in the follow-through phase were shown as to lead an increased ACL loading. The number of cycles to fatigue failure (fatigue life) in the ACL might be several thousands. It is suggested that the excessive training or practice of swing motion without enough rest may be one of factors to lead to damage or injury in the ACL by the fatigue failure. The present technology can provide fundamental information to understand and prevent the ACL injury for golf players.     

The effects of core muscle activation on dynamic trunk position and knee abduction moments: Implications for ACL injury

Anterior cruciate ligament (ACL) injury is one of the most common serious lower-extremity injuries experienced by athletes participating in field and court sports and often occurs during a sudden change in direction or pivot. Both lateral trunk positioning during cutting and peak external knee abduction moments have been associated with ACL injury risk, though it is not known how core muscle activation influences these variables. In this study, the association between core muscle pre-activation and trunk position as well as the association between core muscle pre-activation and peak knee abduction moment during an unanticipated run-to-cut maneuver were investigated in 46 uninjured individuals. Average co-contraction indices and percent differences between muscle pairs were calculated prior to initial contact for internal obliques, external obliques, and L5 extensors using surface electromyography. Outside tilt of the trunk was defined as positive when the trunk was angled away from the cutting direction. No significant associations were found between pre-activations of core muscles and outside tilt of the trunk. Greater average co-contraction index of the L5 extensors was associated with greater peak knee abduction moment (p=0.0107). Increased co-contraction of the L5 extensors before foot contact could influence peak knee abduction moment by stiffening the spine, limiting sagittal plane trunk flexion (a motion pattern previously linked to ACL injury risk) and upper body kinetic energy absorption by the core during weight acceptance.     

Expression of Muscle-Specific MiRNA 206 in the Progression of Disease in a Murine SMA Model

Spinal muscular atrophy (SMA) is a severe neuromuscular disease, the most common in infancy, and the third one among young people under 18 years. The major pathological landmark of SMA is a selective degeneration of lower motor neurons, resulting in progressive skeletal muscle denervation, atrophy, and paralysis. Recently, it has been shown that specific or general changes in the activity of ribonucleoprotein containing micro RNAs (miRNAs) play a role in the development of SMA. Additionally miRNA-206 has been shown to be required for efficient regeneration of neuromuscular synapses after acute nerve injury in an ALS mouse model. Therefore, we correlated the morphology and the architecture of the neuromuscular junctions (NMJs) of quadriceps, a muscle affected in the early stage of the disease, with the expression levels of miRNA-206 in a mouse model of intermediate SMA (SMAII), one of the most frequently used experimental model. Our results showed a decrease in the percentage of type II fibers, an increase in atrophic muscle fibers and a remarkable accumulation of neurofilament (NF) in the pre-synaptic terminal of the NMJs in the quadriceps of SMAII mice. Furthermore, molecular investigation showed a direct link between miRNA-206-HDAC4-FGFBP1, and in particular, a strong up-regulation of this pathway in the late phase of the disease. We propose that miRNA-206 is activated as survival endogenous mechanism, although not sufficient to rescue the integrity of motor neurons. We speculate that early modulation of miRNA-206 expression might delay SMA neurodegenerative pathway and that miRNA-206 could be an innovative, still relatively unexplored, therapeutic target for SMA.     

Combined measurement and modeling of specimen-specific knee mechanics for healthy and ACL-deficient conditions

Quantifying the mechanical environment at the knee is crucial for developing successful rehabilitation and surgical protocols. Computational models have been developed to complement in vitro studies, but are typically created to represent healthy conditions, and may not be useful in modeling pathology and repair. Thus, the objective of this study was to create finite element (FE) models of the natural knee, including specimen-specific tibiofemoral (TF) and patellofemoral (PF) soft tissue structures, and to evaluate joint mechanics in intact and ACL-deficient conditions. Simulated gait in a whole joint knee simulator was performed on two cadaveric specimens in an intact state and subsequently repeated following ACL resection. Simulated gait was performed using motor-actuated quadriceps, and loads at the hip and ankle. Specimen-specific FE models of these experiments were developed in both intact and ACL-deficient states. Model simulations compared kinematics and loading of the experimental TF and PF joints, with average RMS differences [max] of 3.0° [8.2°] and 2.1° [8.4°] in rotations, and 1.7 [3.0] and 2.5 [5.1] mm in translations, for intact and ACL-deficient states, respectively. The timing of peak quadriceps force during stance and swing phase of gait was accurately replicated within 2° of knee flexion and with an average error of 16.7% across specimens and pathology. Ligament recruitment patterns were unique in each specimen; recruitment variability was likely influenced by variations in ligament attachment locations. ACL resections demonstrated contrasting joint mechanics in the two specimens with altered knee motion shown in one specimen (up to 5 mm anterior tibial translation) while increased TF joint loading was shown in the other (up to 400 N).     

Hip extension, knee flexion paradox: a new mechanism for non-contact ACL injury

Considering that an athlete performs at-risk sports activities countless times throughout the course of his or her career prior to the instance of anterior cruciate ligament (ACL) injury, one may conclude that non-contact ACL injury is a rare event. Nevertheless, the overall number of non-contact ACL injuries, both in the US and worldwide, remains alarming due to the growing number of recreational and professional athletes participating in high-risk activities. To date, numerous non-contact ACL injury mechanisms have been proposed, but none provides a detailed picture of sequence of events leading to injury and the exact cause of this injury remains elusive. In this perspective article, we propose a new conception of non-contact ACL injury mechanism that comprehensively integrates risk factors inside and outside the knee joint. The proposed mechanism is robust in the sense that it is biomechanically justifiable and addresses a number of confounding issues related to ACL injury.     

The mechanical consequences of dynamic frontal plane limb alignment for non-contact ACL injury

This study investigated the mechanical consequences of differences in dynamic frontal plane alignment of the support limb and the influence of anticipatory muscle activation at the hip and ankle on reducing the potential for non-contact ACL injury during single-limb landing. A frontal plane, three-link passive dynamic model was used to estimate an ACL non-contact injury threshold. This threshold was defined as the maximum axial force that the knee could sustain before the joint opened 8 degrees either medially or laterally, which was deemed sufficient to cause injury. The limb alignment and hip and ankle muscle contractions were varied to determine their effects on the ACL injury threshold. Valgus or varus alignment reduced the injury threshold compared to neutral alignment, but increasing the anticipatory contraction of hip abduction and adduction muscle groups increased the injury threshold. Increasing anticipatory ankle inversion/eversion muscle contraction had no effect. This study provides a mechanical rationale for the conclusion that a neutral limb alignment (compared to valgus or varus) during landing and increasing hip muscle contraction (abductors/adductors) prior to landing can reduce the possibility of ACL rupture through a valgus or varus opening mechanism.     

A three-dimensional finite element model of the human anterior cruciate ligament: a computational analysis with experimental validation

In this study, the force and stress distribution within the anteromedial (AM) and posterolateral (PL) bundles of the anterior cruciate ligament (ACL) in response to an anterior tibial load with the knee at full extension was calculated using a validated three-dimensional finite element model (FEM) of a human ACL. The interaction between the AM and PL bundles, as well as the contact and friction caused by the ACL wrapping around the bone during knee motion, were included in the model. The AM and PL bundles of the ACL were simulated as incompressible homogeneous and isotropic hyperelastic materials. The multiple-degrees-of-freedom (DOF) knee kinematics of a cadaveric knee were first obtained using a robotic/universal force-moment sensor testing system. These data were used as the boundary conditions for the FEM of the ACL to calculate the forces in the ACL. The calculated forces were compared to the in situ force in the ACL, determined experimentally, to validate the model. The validated FEM was then used to calculate the force and stress distribution within the ACL under an anterior tibial load at full extension. The AM and PL bundles shared the force, and the stress distribution was non-uniform within both bundles with the highest stress localized near the femoral insertion site. The contact and friction caused by the ACL wrapping around the bone during knee motion played the role of transferring the force from the ACL to the bone, and had a direct effect on the force and stress distribution of the ACL. This validated model will enable the analysis of force and stress distribution in the ACL in response to more complex loading conditions and has the potential to help design improved surgical procedures following ACL injuries.