All‐Organic Battery Composed of Thianthrene‐ and TCAQ‐Based Polymers

An all‐organic battery consisting of two redox‐polymers, namely poly(2‐vinylthianthrene) and poly(2‐methacrylamide‐TCAQ) is assembled. This all‐organic battery shows excellent performance characteristics, namely flat discharge plateaus, an output voltage exceeding 1.3 V, and theoretical capacities of both electrodes higher than 100 mA h g^?1. Both organic electrode materials are synthesized in two respective three synthetic steps using the free‐radical polymerization technique. Li‐organic batteries manufactured from these polymers prove their suitability as organic electrode materials. The cathode material poly(2‐vinylthianthrene) (3) displays a discharging plateau at 3.95 V versus Li⁺/Li and a discharge capacity of 105 mA h g^?1, corresponding to a specific energy of about 415 mW h g^?1. The anode material poly(2‐methacrylamide‐TCAQ) (7) exhibits an initial discharge capacity of 130 mA h g^?1, corresponding to 94% material activity. The combination of both materials results in an all‐organic battery with a discharge voltage of 1.35 V and an initial discharge capacity of 105 mA h g^?1 (95% material activity).     

Achieving High‐Voltage and High‐Capacity Aqueous Rechargeable Zinc Ion Battery by Incorporating Two‐Species Redox Reaction

Herein, a two‐species redox reaction of Co(II)/Co(III) and Fe(II)/Fe(III) incorporated in cobalt hexacyanoferrate (CoFe(CN)6) is proposed as a breakthrough to achieve jointly high‐capacity and high‐voltage aqueous Zn‐ion battery. The Zn/CoFe(CN)₆ battery provides a highly operational voltage plateau of 1.75 V (vs metallic Zn) and a high capacity of 173.4 mAh g^?1 at current density of 0.3 A g^?1, taking advantage of the two‐species redox reaction of Co(II)/Co(III) and Fe(II)/Fe(III) couples. Even under extremely fast charge/discharge rate of 6 A g^?1, the battery delivers a sufficiently high discharge capacity of 109.5 mAh g^?1 with its 3D opened structure framework. This is the highest capacity delivered among all the batteries using Prussian blue analogs (PBAs) cathode up to now. Furthermore, Zn/CoFe(CN)₆ battery achieves an excellent cycling performance of 2200 cycles without any capacity decay at coulombic efficiency of nearly 100%. One further step, a sol–gel transition strategy for hydrogel electrolyte is developed to construct high‐performance flexible cable‐type battery. With the strategy, the active materials can adequately contact with electrolyte, resulting in improved electrochemical performance (≈18.73% capacity increase) and mechanical robustness of the solid‐state device. It is believed that this study optimizes electrodes by incorporating multi redox reaction species for high‐voltage and high‐capacity batteries.     

High‐Voltage Oxygen‐Redox‐Based Cathode for Rechargeable Sodium‐Ion Batteries

Recently, anionic‐redox‐based materials have shown promising electrochemical performance as cathode materials for sodium‐ion batteries. However, one of the limiting factors in the development of oxygen‐redox‐based electrodes is their low operating voltage. In this study, the operating voltage of oxygen‐redox‐based electrodes is raised by incorporating nickel into P2‐type Na_2/3[Zn_0.3Mn_0.7]O₂ in such a way that the zinc is partially substituted by nickel. As designed, the resulting P2‐type Na_2/3[(Ni_0.5Zn_0.5)_0.3Mn_0.7]O₂ electrode exhibits an average operating voltage of 3.5 V and retains 95% of its initial capacity after 200 cycles in the voltage range of 2.3–4.6 V at 0.1C (26 mA g^?1). Operando X‐ray diffraction analysis reveals the reversible phase transition: P2 to OP4 phase on charge and recovery to the P2 phase on discharge. Moreover, ex situ X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies reveal that the capacity is generated by the combination of Ni²⁺/Ni⁴⁺ and O^2?/O^1? redox pairs, which is supported by first‐principles calculations. It is thought that this kind of high voltage redox species combined with oxygen redox could be an interesting approach to further increase energy density of cathode materials for not only sodium‐based rechargeable batteries, but other alkali‐ion battery systems.     

A Flexible Solid‐State Aqueous Zinc Hybrid Battery with Flat and High‐Voltage Discharge Plateau

The migration of zinc‐ion batteries from alkaline electrolyte to neutral or mild acidic electrolyte promotes research into their flexible applications. However, discharge voltage of many reported zinc‐ion batteries is far from satisfactory. On one hand, the battery voltage is substantially restricted by the narrow voltage window of aqueous electrolytes. On the other hand, many batteries yield a low‐voltage discharge plateau or show no plateau but capacitor‐like sloping discharge profiles. This impacts the battery's practicability for flexible electronics where stable and consistent high energy is needed. Herein, an aqueous zinc hybrid battery based on a highly concentrated dual‐ion electrolyte and a hierarchically structured lithium‐ion‐intercalative LiVPO₄F cathode is developed. This hybrid battery delivers a flat and high‐voltage discharge plateau of nearly 1.9 V, ranking among the highest reported values for all aqueous zinc‐based batteries. The resultant high energy density of 235.6 Wh kg^?1 at a power density of 320.8 W kg^?1 also outperforms most reported zinc‐based batteries. A designed solid‐state and long‐lasting hydrogel electrolyte is subsequently applied in the fabrication of a flexible battery, which can be integrated into various flexible devices as powerful energy supply. The idea of designing such a hybrid battery offers a new strategy for developing high‐voltage and high‐energy aqueous energy storage systems.     

Soft Carbon as Anode for High‐Performance Sodium‐Based Dual Ion Full Battery

Sodium‐based dual ion full batteries (NDIBs) are reported with soft carbon as anode and graphite as cathode for the first time. The NDIBs operate at high discharge voltage plateau of 3.58 V, with superior discharge capacity of 103 mA h g^?1, excellent rate performance, and long‐term cycling stability over 800 cycles with capacity retention of 81.8%. The mechanism of Na⁺ and PF₆^? insertion/desertion during the charging/discharging processes is proposed and discussed in detail, with the support of various spectroscopies.     

A Solid-State Battery Cathode with a Polymer Composite Electrolyte and Low Tortuosity Microstructure by Directional Freezing and Polymerization

Solid-state Li metal batteries (SSLMBs) combine improved safety and high specific energy that can surpass current Li ion batteries. However, the Li⁺ ion diffusivity in a composite cathode—a combination of active material and solid-state electrolyte (SSE)—is at least an order of magnitude lower than that of the SSE alone because of the highly tortuous ion transport pathways in the cathode. This lowers the realizable capacity and mandates relatively thin (30–300 μm) cathodes, and hence low overall energy storage. Here, a thick (600 μm) hybrid cathode comprising vertically aligned LiNi_0.8Mn_0.1Co_0.1O₂ (NMC811)-rich channels filled with a [LiTFSI+PEGMA+MePrPyl TFSI] polymer composite electrolyte is fabricated by an innovative directional freezing and polymerization method. X-ray micro-computed tomography, ion mobility simulations, and DC depolarization show that the cathode structure improves Li⁺ ion diffusivity in the cathode from 4.4 × 10⁻⁹ to 1.4 × 10⁻⁷ cm² s⁻¹. In a SSLMB full cell at 25 ^oC, the cathode provides gravimetric capacities of 199 and 120 mAh g⁻¹, and ultra-high areal capacities of 16.7 and 10.1 mAh cm⁻² at 0.05 and 1 C, respectively. The work demonstrates a scalable approach to realizing composite cathode structures with kinetically favorable ion transport characteristics in SSLMBs.     

KVOPO4: A New High Capacity Multielectron Na‐Ion Battery Cathode

Sodium ion batteries have attracted much attention in recent years, due to the higher abundance and lower cost of sodium, as an alternative to lithium ion batteries. However, a major challenge is their lower energy density. In this work, we report a novel multi‐electron cathode material, KVOPO₄, for sodium ion batteries. Due to the unique polyhedral framework, the V³⁺ ? V⁴⁺ ? V⁵⁺ redox couple was for the first time fully activated by sodium ions in a vanadyl phosphate phase. The KVOPO₄ based cathode delivered reversible multiple sodium (i.e. maximum 1.66 Na⁺ per formula unit) storage capability, which leads to a high specific capacity of 235 Ah kg^?1. Combining an average voltage of 2.56 V vs. Na/Na⁺, a high practical energy density of over 600 Wh kg^?1 was achieved, the highest yet reported for any sodium cathode material. The cathode exhibits a very small volume change upon cycling (1.4% for 0.64 sodium and 8.0% for 1.66 sodium ions). Density functional theory (DFT) calculations indicate that the KVOPO₄ framework is a 3D ionic conductor with a reasonably, low Na⁺ migration energy barrier of ≈450 meV, in line with the good rate capability obtained.     

Twisted Perylene Diimides with Tunable Redox Properties for Organic Sodium‐Ion Batteries

Organic rechargeable batteries gain huge scientific interest owing to the design flexibility and resource renewability of the active materials. However, the low reduction potentials still remain a challenge to compete with the inorganic cathodes. This study demonstrates a simple and efficient approach to tune the redox properties of perylene diimides (PDIs) as high voltage cathodes for organic‐based sodium‐ion batteries (SIBs). With appropriate electron‐withdrawing groups as substituents on perylene diimides, this study shows a remarkable tunability in the discharge potential from 2.1 to 2.6 V versus Na⁺/Na with a sodium intake of ≈1.6 ions per molecule. Further, this study explores tuning the shape of the voltage profiles by systematically tuning the dihedral angle in the perylene ring and demonstrates a single plateau discharge profile for tetrabromo‐substituted perylene diimide (dihedral angles θ₁ & θ₂ = 38°). Detailed structural analysis and electrochemical studies on substituted PDIs unveil the correlation between molecular structure and voltage profile. The results are promising and offer new avenues to tailor the redox properties of organic electrodes, a step closer toward the realization of greener and sustainable electrochemical storage devices.     

The Proton Trap Technology—Toward High Potential Quinone‐Based Organic Energy Storage

An organic cathode material based on a copolymer of poly(3,4‐ethylenedioxythiophene) containing pyridine and hydroquinone functionalities is described as a proton trap technology. Utilizing the quinone to hydroquinone redox conversion, this technology leads to electrode materials compatible with lithium and sodium cycling chemistries. These materials have high inherent potentials that in combination with lithium give a reversible output voltage of above 3.5 V (vs Li^0/+) without relying on lithiation of the material, something that is not showed for quinones previously. Key to success stems from coupling an intrapolymeric proton transfer, realized by an incorporated pyridine proton donor/acceptor functionality, with the hydroquinone redox reactions. Trapping of protons in the cathode material effectively decouples the quinone redox chemistry from the cycling chemistry of the anode, which makes the material insensitive to the nature of the electrolyte cation and hence compatible with several anode materials. Furthermore, the conducting polymer backbone allows assembly without any additives for electronic conductivity. The concept is demonstrated by electrochemical characterization in several electrolytes and finally by employing the proton trap material as the cathode in lithium and sodium batteries. These findings represent a new concept for enabling high potential organic materials for the next generation of energy storage systems.     

A Novel High‐Energy Hybrid Supercapacitor with an Anatase TiO2–Reduced Graphene Oxide Anode and an Activated Carbon Cathode

A hybrid supercapacitor with high energy and power densities is reported. It comprises a composite anode of anatase TiO₂ and reduced graphene oxide and an activated carbon cathode in a non‐aqueous electrolyte. While intercalation compounds can provide high energy typically at the expense of power, the anatase TiO₂ nanoparticles are able to sustain both high energy and power in the hybrid supercapacitor. At a voltage range from 1.0 to 3.0 V, 42 W h kg^?1 of energy is achieved at 800 W kg^?1. Even at a 4‐s charge/discharge rate, an energy density as high as 8.9 W h kg^?1 can be retained. The high energy and power of this hybrid supercapacitor bridges the gap between conventional batteries with high energy and low power and supercapacitors with high power and low energy.     

Toward a Reversible Calcium‐Sulfur Battery with a Lithium‐Ion Mediation Approach

Calcium represents a promising anode for the development of high‐energy‐density, low‐cost batteries. However, a lack of suitable electrolytes has restricted the development of rechargeable batteries with a Ca anode. Furthermore, to achieve a high energy density system, sulfur would be an ideal cathode to couple with the Ca anode. Unfortunately, a reversible calcium‐sulfur (Ca‐S) battery has not yet been reported. Herein, a basic study of a reversible nonaqueous room‐temperature Ca‐S battery is presented. The reversibility of the Ca‐S chemistry and high utilization of the sulfur cathode are enabled by employing a Li⁺‐ion‐mediated calcium‐based electrolyte. Mechanistic insights pursued by spectroscopic, electrochemical, microscopic, and theoretical simulation (density functional theory) investigations imply that the Li⁺‐ions in the Ca‐electrolyte stimulate the reactivation of polysulfide/sulfide species. The coordination of lithium to sulfur reduces the formation of sturdy Ca‐S ionic bonds, thus boosting the reversibility of the Ca‐S chemistry. In addition, the presence of Li⁺‐ions facilitates the ionic charge transfer both in the electrolyte and across the solid electrolyte interphase layer, consequently reducing the interfacial and bulk impedance of Ca‐S batteries. As a result, both the utilization of active sulfur in the cathode and the discharge voltage of Ca‐S batteries are significantly improved.     

A High Energy Density Aqueous Battery Achieved by Dual Dissolution/Deposition Reactions Separated in Acid‐Alkaline Electrolyte

Aqueous batteries are facing big challenges in the context of low working voltages and energy density, which are dictated by the narrow electrochemical window of aqueous electrolytes and low specific capacities of traditional intercalation‐type electrodes, even though they usually represent high safety, low cost, and simple maintenance. For the first time, this work demonstrates a record high‐energy‐density (1503 Wh kg^?1 calculated from the cathode active material) aqueous battery system that derives from a novel electrolyte design to expand the electrochemical window of electrolyte to 3 V and two high‐specific‐capacity electrode reactions. An acid‐alkaline dual electrolyte separated by an ion‐selective membrane enables two dissolution/deposition electrode redox reactions of MnO₂/Mn²⁺ and Zn/Zn(OH)₄^2? with theoretical specific capacities of 616 and 820 mAh g^?1, respectively. The newly proposed Zn–Mn²⁺ aqueous battery shows a high Coulombic efficiency of 98.4% and cycling stability of 97.5% of discharge capacity retention for 1500 cycles. Furthermore, in the flow battery based on Zn–Mn²⁺ pairs, more excellent stability of 99.5% of discharge capacity retention for 6000 cycles is achieved due to greatly improved reversibility of the Zn anode. This work provides a new path for the development of novel aqueous batteries with high voltage and energy density.     

Formation of Solid–Electrolyte Interfaces in Aqueous Electrolytes by Altering Cation‐Solvation Shell Structure

Aqueous lithium/sodium‐ion batteries (AIBs) have received increasing attention because of their intrinsic safety. However, the narrow electrochemical stability window (1.23 V) of the aqueous electrolyte significantly hinders the development of AIBs, especially the choice of electrode materials. Here, an aqueous electrolyte composed of LiClO₄, urea, and H₂O, which allows the electrochemical stability window to be expanded to 3.0 V, is developed. Novel [Li (H₂O)_x(organic)_y]⁺ primary solvation sheath structures are developed in this aqueous electrolyte, which contribute to the formation of solid–electrolyte interface layers on the surfaces of both the cathode and anode. The expanded electrochemical stability window enables the construction of full aqueous Li‐ion batteries with LiMn₂O₄ cathodes and Mo₆S₈ anodes, demonstrating an operating voltage of 2.1 V and stability over 2000 cycles. Furthermore, a symmetric aqueous Na‐ion battery using Na₃V₂(PO₄)₃ as both the cathode and anode exhibits operating voltage of 1.7 V and stability over 1000 cycles at a rate of 5 C.     

Hollow CuS Nanoboxes as Li‐Free Cathode for High‐Rate and Long‐Life Lithium Metal Batteries

Transition metal sulfides hold promising potentials as Li‐free conversion‐type cathode materials for high energy density lithium metal batteries. However, the practical deployment of these materials is hampered by their poor rate capability and short cycling life. In this work, the authors take the advantage of hollow structure of CuS nanoboxes to accommodate the volume expansion and facilitate the ion diffusion during discharge–charge processes. As a result, the hollow CuS nanoboxes achieve excellent rate performance (≈371 mAh g^?1 at 20 C) and ultra‐long cycle life (>1000 cycles). The structure and valence evolution of the CuS nanobox cathode are identified by scanning electron microscopy, transmission electron microscopy, and X‐ray photoelectron spectroscopy. Furthermore, the lithium storage mechanism is revealed by galvanostatic intermittent titration technique and operando Raman spectroscopy for the initial charge–discharge process and the following reversible processes. These results suggest that the hollow CuS nanobox material is a promising candidate as a low‐cost Li‐free cathode material for high‐rate and long‐life lithium metal batteries.     

Toward a Four‐Electron Redox Quinone Polymer for High Capacity Lithium Ion Storage

Despite recent advances, current polymeric organic cathode materials have failed to incorporate a high degree of lithium storage in a small molecular framework, resulting in low capacities relative to monomers. This report discloses the development of a lithium salt polymer of dihydroxyanthraquinone (LiDHAQS) capable of storing four Li⁺ per monomer. The combination of storing four Li⁺ per monomer and a low molecular weight monomer results in a capacity of 330 mA h g^?1, a record for this class of material. The additional redox events responsible for added Li⁺ storage occur between 3.0 and 3.6 V versus Li/Li⁺ resulting in an average discharge potential of 2.5 V versus Li/Li⁺. These metrics combined yield a high energy density of 825 W h kg^?1 which is a 55% improvement over commercial lithium cobalt oxide. The high performance of LiDHAQS makes it a promising material for next generation Li⁺ cathodes.     

High‐Performance Aqueous Rechargeable Li‐Ni Battery Based on Ni(OH)2/NiOOH Redox Couple with High Voltage

New energy storage and conversion systems require large‐scale, cost‐effective, good safety, high reliability, and high energy density. This study demonstrates a low‐cost and safe aqueous rechargeable lithium‐nickel (Li‐Ni) battery with solid state Ni(OH)₂/NiOOH redox couple as cathode and hybrid electrolytes separated by a Li‐ion‐conductive solid electrolyte layer. The proposed aqueous rechargeable Li‐Ni battery exhibits an approximately open‐circuit potential of 3.5 V, outperforming the theoretic stable window of water 1.23 V, and its energy density can be 912.6 W h kg^‐1, which is much higher than that of state‐of‐the‐art lithium ion batteries. The use of a solid‐state redox couple as cathode with a metallic lithium anode provides another postlithium chemistry for practical energy storage and conversion.     

Acacia Senegal–Inspired Bifunctional Binder for Longevity of Lithium–Sulfur Batteries

The sulfur cathode in traditional lithium–sulfur batteries suffers from poor cyclability due to polysulfide shuttling effect as well as large volume change during charge/discharge processes. Gum arabic (GA), a low cost, nontoxic, and sustainable natural polymer from Acacia senegal, is adopted as a binder for the sulfur cathode to address these issues. The excellent mechanical properties of GA endow the cathode with high binding strength and suitable ductility to buffer volume change, while the functional groups chemically and physically confine sulfur species within the cathode to inhibit the shuttling effect of polysulfides. Additionally, GA shifts the electrode fabrication process from the organic solvent process to an aqueous process, eliminates the use of toxic organic solvents, and achieves uniformly distributed electrode with lower impedance. A remarkable cycling performance, i.e., 841 mAh g^?1 at low current rate of C/5, is achieved throughout 500 cycles due to the bifunctions of the GA binder.     

The Synergistic Effect of Cation and Anion of an Ionic Liquid Additive for Lithium Metal Anodes

Lithium metal anodes are steadily gaining more attention, as their superior specific capacities and low redox voltage can significantly increase the energy density of rechargeable batteries far beyond those of current Li‐ion batteries. Nonetheless, the relevant technology is still in a premature research stage mainly due to the uncontrolled growth of Li dendrites that ceaselessly cause unwanted side reactions with electrolyte. In order to circumvent this shortcoming, herein, an ionic liquid additive, namely, 1‐dodecyl‐1‐methylpyrrolidinium (Pyr1(12)⁺) bis(fluorosulfonyl)imide (FSI^?), for conventional electrolyte solutions is reported. The Pyr1(12)⁺ cation with a long aliphatic chain mitigates dendrite growth via the combined effects of electrostatic shielding and lithiophobicity, whereas the FSI^? anion can induce the formation of rigid solid–electrolyte interphase layers. The synergy between the cation and anion significantly improves cycling performance in asymmetric and symmetric control cells and a full cell paired with an LiFePO₄ cathode. The present study provides a useful insight into the molecular engineering of electrolyte components by manipulating the charge and structures of the involved molecules.     

Pseudo‐Zn–Air and Zn‐Ion Intercalation Dual Mechanisms to Realize High‐Areal Capacitance and Long‐Life Energy Storage in Aqueous Zn Battery

Aqueous zinc batteries are considered as promising alternatives to lithium ion batteries owing to their low cost and high safety. However, the developments of state‐of‐the‐art zinc‐ion batteries (ZIB) and zinc–air batteries (ZAB) are limited by the unsatisfied capacities and poor cycling stabilities, respectively. It is of significance in utilizing the long‐cycle life of ZIB and high capacity of ZAB to exploit advanced energy storage systems. Herein, a bulk composite of graphene oxide and vanadium oxide (V₅O₁₂·6H₂O) as cathode material for aqueous Zn batteries in a mild electrolyte is employed. The battery performance is demonstrated to arise from a combination of the reversible cations insertion/extraction in vanadium oxide and especially the electrochemical redox reactions on the surface functional groups of graphene oxide (named as pseudo‐Zn–air mechanism). Along with adjusting the hydroxyl content on the surface of graphene oxide, the specific capacity is significantly increased from 342 mAh g^?1 to a maximum of 496 mAh g^?1 at 100 mA g^?1. The surface‐controlled kinetics occurring in the bulk composite ensure a high areal capacity of 10.6 mAh cm^?2 at a mass loading of 26.5 mg cm^?2, and a capacity retention of 84.7% over 10 000 cycles at a high current density of 10 A g^?1.     

Suppressing Voltage Fading of Li‐Rich Oxide Cathode via Building a Well‐Protected and Partially‐Protonated Surface by Polyacrylic Acid Binder for Cycle‐Stable Li‐Ion Batteries

Li‐rich manganese based oxides (LRMOs) are considered an attractive high‐capacity cathode for advanced Li‐ion batteries; however, their poor cyclability and gradual voltage fading have hindered their practical applications. Herein, an efficient and facile strategy is proposed to stabilize the lattice structure of LRMOs by surface modification of polyacrylic acid (PAA). The PAA‐coated LRMO electrode exhibits only 104 mV of the voltage fading after 100 cycles and 88% capacity retention over 500 cycles. The structural stability is attributed to the carboxyl groups in PAA chains reacting with oxygen species on the surface of LRMO to form a uniform and tightly coated film, which significantly suppresses the dissolution of transition metal elements from the cathode materials into the electrolyte. Importantly, a H⁺/Li⁺ exchange reaction takes place between the LRMO and PAA, generating a proton‐doped surface layer. Density functional theory calculations and experimental evidence demonstrates that the H⁺ ions in the surface lattice efficiently inhibit the migration of transition metal ions, leading to a stabilized lattice structure. This surface modification approach may provide a new route to building a stable Li‐rich oxide cathode with high capacity retention and low voltage fading for practical Li‐ion battery applications.