Iodoacetyl-functionalized pullulan: A supplemental enhancer for single-domain antibody–polyclonal antibody sandwich enzyme-linked immunosorbent assay for detection of survivin

Survivin, an inhibitor of the apoptosis protein family, is a potent tumor marker for diagnosis and prognosis. The enzyme-linked immunosorbent assay (ELISA) is one of the methods that has been used for detection of survivin. However, ELISA has several disadvantages caused by the use of conventional antibodies, and we have therefore been trying to develop a novel ELISA system using camelid single-domain antibodies (VHHs) as advantageous replacements. Here we report a supplemental approach to improve the VHH-polyclonal antibody sandwich ELISA for survivin detection. Iodoacetyl-functionalized pullulan was synthesized, and its thiol reactivity was characterized by a model reaction with l-cysteine. The thiophilic pullulan was applied to an immunoassay as an additive upon coating of standard assay plates with an anti-survivin VHH fusion protein with C-terminal cysteine. The results showed that the mole ratio of the additive to VHH had a significant effect on the consequent response. Mole ratios of 0.07, 0.7, and 7 led to 90% lower, 15% higher, and 69% lower responses, respectively, than the response of a positive control in which no additive was used. The background levels observed in any additive conditions were as low as that of a negative control lacking both VHH and the additive. These results indicate the applicability of the thiol-reactive pullulan as a response enhancer to VHH-based ELISA.     

A sandwich-type enzyme-linked immunosorbent assay for the analysis of recombinant human interferon α-2b

The ability of a previously developed sandwich-type enzyme-linked immunosorbent assay (ELISA) for discriminating incorrectly folded recombinant human interferon -2b (IFN-2b) molecular species from multi disulphide-bonded species was investigated. This ELISA was applied to evaluate and improve the effectiveness of the renaturation of IFN-2b, a step that is currently used in the large-scale production of IFN-2b produced in recombinant Escherichia coli strains.     

Enhanced electrochemiluminescence from luminol at carboxyl graphene for detection of α-fetoprotein

In this study, a novel sensitive electrochemiluminescence (ECL) immunosensor was constructed by carboxyl graphene (GR) for enhancing luminol–O₂ system emission. Here, carboxyl GR was used to enhance the ECL intensity of luminol that had excellent electron transfer ability and good solubility. The sensing platform was constructed by depositing carboxyl GR on electrodes and immobilizing antibodies on the surface of carboxyl GR through amidation. The specific immunoreaction between α-fetoprotein (AFP) and antibodies resulted in a decrease of ECL intensity, and the intensity decreased linearly with AFP concentrations in the range of 5 pg ml⁻¹ to 14 ng ml⁻¹ with a detection limit of 2.0 pg ml⁻¹. The proposed immunosensor exhibits high specificity, good reproducibility, and longtime stability. It may become a promising technique for protein detection.     

Sensitive amperometric immunosensor for α-fetoprotein based on carbon nanotube/gold nanoparticle doped chitosan film

A novel strategy for the fabrication of sensitive immunosensor to detect α-fetoprotein (AFP) in human serum has been proposed. The immunosensor was prepared by immobilizing AFP antigen onto the glassy carbon electrode (GC) modified by gold nanoparticles and carbon nanotubes doped chitosan (GNP/CNT/Ch) film. GNP/CNT hybrids were produced by one-step synthesis based on the direct redox reaction. The electrochemical properties of GNP/CNT/Ch films were characterized by impedance spectroscopy and cyclic voltammetry. It was indicated that GNP/CNT nanohybrid acted as an electron promoter and accelerated the electron transfer. Sample AFP, immobilized AFP, and alkaline phosphatase (ALP)-labeled antibody were incubated together for the determination based on a competitive immunoassay format. After the immunoassay reaction, the bound ALP label on the modified GC led to an amperometric response of 1-naphthyl phosphate (1-NP), which was changed with the different antigen concentrations in solution. Under the optimized experimental conditions, the resulting immunosensor could detect AFP in a linear range from 1 to 55 ng ml⁻¹ with a detection limit of 0.6 ng ml⁻¹. The proposed immunosensor, by using GNP/CNT/Ch as the immobilization matrix of AFP, offers an excellent amperometric response of ALP-anti-AFP to 1-NP. The immunosensor provided a new alternative to the application of other antigens or other bioactive molecules.     

Determinatıon of ochratoxin A and total aflatoxin levels in corn samples from Turkey by enzyme-linked immunosorbent assay

Forty-seven samples of corn were collected from various street bazaars and market outlets in different regions of Turkey and total aflatoxin (AF) and ochratoxin A (OTA) levels were determined by enzyme-linked immunosorbent assay (ELISA) following sample preparation. Levels of AF and OTA in corn samples ranged between 1.75–120.3 μg/kg and 1.08–8.57 μg/kg, respectively. Although 53% of the samples analysed had no detectable levels of AF, 4% of similar samples were found to contain AFs above the acceptable limit of 10 μg/kg in Turkey. For OTA, 4% of the corn samples had levels above the acceptable limit (3 μg/kg) in Turkey, with over 43% samples not found to contain this mycotoxin. Although the levels of mycotoxins analysed in this study were not found to be high and the percentage of samples contaminated above permitted limits were low, the importance of overall daily dietary intake should not be underestimated and control of these fungal metabolites in corn must be explored to minimise the hazards they may cause in humans.     

Amperometric immunosensor based on multiwalled carbon nanotubes/Prussian blue/nanogold-modified electrode for determination of α-fetoprotein

In this article, a conspicuously simple and highly sensitive amperometric immunosensor based on the sequential electrodeposition of Prussian blue (PB) and gold nanoparticles (GNPs) on multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (GCE) surface is proposed for the detection of α-fetoprotein (AFP). By comparison with PB, the MWCNT/PB composite film had been proven to show much better electrochemical stability and a larger response current. The electrodeposited GNP film can be used not only to immobilize biomolecules but also to avoid the leakage of PB and to prevent shedding of MWCNT/PB composite film from the electrode surface. The performance and factors influencing the performance of the immunosensor were investigated. Under optimal experimental conditions, the proposed immunosensor for AFP was observed with an ultralow limit of detection (LOD) equal to 3 pg/ml (at 3δ), and the linear working range spanned the concentrations of AFP from 0.01 to 300 ng/ml. Moreover, the immunosensor, as well as a commercially available kit, was examined for use in the determination of AFP in real human serum specimens. More significant, the assay mentioned here is simpler than the traditional enzyme-linked immunosorbent assay (ELISA), and an excellent correlation of levels of AFP measured was obtained, indicating that the developed immunoassay could be a promising alternative approach for detection of AFP and other tumor markers in the clinical diagnosis.     

One-step immobilization of antibodies for α-1-fetoprotein immunosensor based on dialdehyde cellulose/ionic liquid composite

A novel immunosensor for α-1-fetoprotein based on dialdehyde cellulose/ionic liquid composite film as a matrix has been developed. Microcrystalline cellulose was activated by sodium metaperiodate to produce dialdehyde cellulose. Antibodies can be immobilized on the electrode by a one-step method through covalent bonding of the aldehyde groups of dialdehyde cellulose with the amino groups of antibodies, in which no additional chemical cross-linking step is required. Moreover, ionic liquid added can improve the conductivity of the sensing interface and, therefore, can enhance the electrochemical signal. In this work, α-1-fetoprotein was detected within the range from 0.1 to 60 ng ml⁻¹ with a detection limit of 0.07 ng ml⁻¹ (signal/noise = 3). The proposed immunosensor had good specificity and reproducibility. It was used to determine real samples with satisfactory results.     

Development of an enzyme-linked-receptor assay based on Syrian hamster β2-adrenergic receptor for detection of β-agonists

β-Adrenergic agonists (β-agonists) are illegally used in animal husbandry, threatening the health of consumers. To realize multianalyte detection of β-agonists, a β2-adrenergic receptor (β2-AR) was cloned from Syrian hamster lung and heterogeneously expressed by Spodoptera frugiperda (Sf9) cells. The recombinant β2-AR was purified from intracellular soluble proteins of infected Sf9 cells, and was utilized to establish an enzyme-linked-receptor assay (ELRA) to detect a group of β-agonists simultaneously. This assay was based on direct competitive inhibition of binding of horseradish peroxidase-labeled ractopamine to the immobilized β2-AR proteins by β-agonists. The IC₅₀ and limit of detection values for ractopamine were 30.38 μg L⁻¹ and 5.20 μg L⁻¹, respectively. Clenbuterol and salbutamol showed 87.7% and 58.5% cross-reactivities with ractopamine, respectively. This assay is simple, rapid, and environmentally friendly, showing a potential application in the screening of β-agonists in animal feeds.     

Quantification of müllerian inhibiting substance in developing chick gonads by a competitive enzyme-linked immunosorbent assay

An immunoblotting method was used to purify a Müllerian-inhibiting substance (MIS)-specific antiserum. The serum was used to quantify the content of MIS in developing chick gonads by competitive enzyme-linked immunosorbent assay. From embryonic stages to the eleventh week after hatching, male chicken testes have a high content of MIS in the following two stages: (1) from the sixth to the eighth day and from the fourteenth to the twentieth day of incubation, and (2) from the second to the eighth week after hatching. The high content of MIS in the early embryonic stage is closely correlated with the natural pattern of Müllerian duct regression observed in the male embryo. From the sixth to the twelfth day of incubation, the female right ovary contains a higher content of MIS than that of the left ovary. Up to the fourteenth day of incubation, the content of MIS in the left ovary reaches maximum levels and then declines. The combination of MIS from right and left ovaries was found to be highest in the ninth to the fourteenth day of incubation, when the regression of the right Müllerian duct reached its highest peak. However, the question of the inability of MIS to cause regression of the female left Müllerian duct and the caudal part of the right duct is raised and discussed. The hypothesis that prenatal estrogenic hormone (diethylstilbestrol) protects the Müllerian duct has been reevaluated. It was found that estrogen does not reduce the MIS content in prenatally treated gonads.     

Two-site assay of human α1-fetoprotein using125I-labelled monoclonal antibodies

Monoclonal antibodies to human ₁-ietoprotein (AFP) have been compared with a conventionally produced antiserum using radioimmunoassay and two-site immunoradiometric techniques. A low-affinity antibody, which proved inadequate for use in a radioimmunoassay, gave asatisfactory dose-response Curve in a rapid two-site assay. A higher-affinity antibody yielded a simple, rapid, and sensitive two-site assay suitable for routine measurement of serum AFP.     

Electrochemical immunosensor for α-fetoprotein detection using ferroferric oxide and horseradish peroxidase as signal amplification labels

An electrochemical immunosensor for quantitative detection of α-fetoprotein (AFP) in human serum was developed using graphene sheets (GS) and thionine (TH) as electrode materials and mesoporous silica nanoparticles (MSNs) loaded with ferroferric oxide (Fe₃O₄) nanoparticles and horseradish peroxidase (HRP) as labels for signal amplification. In this study, the compound of GS and TH (GS–TH) was used as a substrate for promoting electron transfer and immobilization of primary antibody of AFP (Ab₁). MSNs were used as a carrier for immobilization of secondary antibody of AFP (Ab₂), Fe₃O₄, and HRP. The synergistic effect occurred between Fe₃O₄ and HRP and greatly improved the sensitivity of the immunosensor. This method could detect AFP over a wide concentration range from 0.01 to 25 ng ml⁻¹ with a detection limit of 4 pg ml⁻¹. This strategy may find wide potential application in clinical analysis or detection of other tumor markers.     

An assay for urinary estriol-16α-glucuronide based on antibody-enhanced chemiluminescence

An immunoassay for estriol-16α-glucuronide in pregnancy urine is described that utilizes antibody-enhanced chemiluminescence. The steroid glucuronide was covalently conjugated with the chemiluminescent marker aminobutyl-ethyl-isoluminol. The light yield of this conjugate upon oxidation was augmented by specific antibody, and this effect was inhibited by addition of the homologous steroid glucuronide (10–100 pg) in a dose-dependent manner. The assay does not require separation of bound and free ligand and proved satisfactory with respect to sensitivity, precision and accuracy. Assay results obtained by radioinununoassay and chemiluminescence immunoassay were in good agreement (r = 0.98; n = 25).     

A natural substrate-based fluorescence assay for inhibitor screening on diacylglycerol lipase α

The endocannabinoid 2-arachidonoylglycerol (2-AG) is predominantly biosynthesized by sn-1-diacylglycerol lipase α (DAGL-α) in the CNS. Selective inhibitors of DAGL-α will provide valuable insights in the role of 2-AG in endocannabinoid signaling processes and are potential therapeutics for the treatment of obesity and neurodegenerative diseases. Here, we describe the development of a natural substrate-based fluorescence assay for DAGL-α, using a coupled enzyme approach. The continuous setup of our assay allows monitoring of DAGL-α activity in real-time and in a 96-well plate format. This constitutes a major improvement to the currently available radiometric and LC/MS-based methods, which can be executed only in low-throughput formats. In addition, our assay circumvents the use of radioactive material. We demonstrate that our assay can be used to screen inhibitors of DAGL-α activity, using 1-stearoyl-2-arachidonoyl-sn-glycerol as the physiologically relevant natural substrate of DAGL-α. Furthermore, our method can be employed to measure DAGL activity and inhibition in the mouse brain membrane proteome. Consequently, our assay should serve as a valuable tool for rapid hit validation and lead optimization of DAGL-α inhibitors.     

Immobilization of lysine oxidase on a gold–platinum nanoparticles modified Au electrode for detection of lysine

A commercial lysine oxidase (LyOx) from Trichoderma viride was immobilized covalently onto gold nanoparticles (AuNPs) and platinum nanoparticles (PtNPs) electrodeposited onto Au electrode using 3-aminopropyltriethoxy silane (3-APTES) and glutaraldehyde cross linking chemistry. A lysine biosensor was fabricated using LyOx/3-APTES/AuNPs-PtNPs/Au electrode as a working electrode, Ag/AgCl (3 M KCl) as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The cumulative effect of AuNPs and PtNPs showed excellent electrocatalytic activity at low applied potential for detection of H₂O₂, a product of LyOx reaction. The sensor showed its optimum response within 4 s, when polarized at 0.2 V vs. Ag/AgCl in 0.1 M phosphate buffer, pH 7.5 at 30 °C. The linear range and detection limit of the sensor were 1.0–600 μM and 1.0 μM (S/N = 3), respectively. Biosensor measured lysine level in sera, milk and amino acid tablet, which correlated well with those by standard HPLC method. The enzyme electrode lost 50% of its initial activity after 200 uses over a period of 4 months.     

A new resorufin-based α-glucosidase assay for high-throughput screening

Mutations in α-glucosidase cause accumulation of glycogen in lysosomes, resulting in Pompe disease, a lysosomal storage disorder. Small molecule chaperones that bind to enzyme proteins and correct the misfolding and mistrafficking of mutant proteins have emerged as a new therapeutic approach for the lysosomal storage disorders. In addition, α-glucosidase is a therapeutic target for type II diabetes, and α-glucosidase inhibitors have been used in the clinic as alternative treatments for this disease. We have developed a new fluorogenic substrate for the α-glucosidase enzyme assay, resorufin α-d-glucopyranoside. The enzyme reaction product of this new substrate emits at a peak of 590 nm, reducing the interference from fluorescent compounds seen with the existing fluorogenic substrate, 4-methylumbelliferyl-α-d-glucopyranoside. Also, the enzyme kinetic assay can be carried out continuously without the addition of stop solution due to the lower pK_a of the product of this substrate. Therefore, this new fluorogenic substrate is a useful tool for the α-glucosidase enzyme assay and will facilitate compound screening for the development of new therapies for Pompe disease.     

Electrochemical immunosensor based on Pd–Au nanoparticles supported on functionalized PDDA-MWCNT nanocomposites for aflatoxin B1 detection

This paper reports a label-free electrochemical immunosensor for the determination of aflatoxin B1 (AFB1), which is based on a gold electrode modified by a biocompatible film of carbon nanotubes/poly(diallyldimethylammoniumchloride)/Pd–Au nanoparticles (CNTs/PDDA/Pd–Au). The nanocomposite was characterized by transmission electron microscopy and the electrochemical behavior of modified electrodes was investigated by cyclic voltammetry. The CNTs/PDDA/Pd–Au nanocomposites film showed good electron transfer ability, which ensured high sensitivity to detect AFB1 in a range from 0.05 to 25 ng mL⁻¹ with a detection limit of 0.03 ng mL⁻¹ obtained at 3σ (where σ is the standard deviation of the blank solution, n = 10). The proposed immunosensor provides a simple tool for AFB1 detection. This strategy can be extended to any other antigen detection by using the corresponding antibodies.     

Enzyme-amplified electrochemical biosensor for detection of PML-RARα fusion gene based on hairpin LNA probe

In this study, an enzyme-amplified electrochemical biosensor was developed for detection of the promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia (APL). This new sensor employs a hairpin locked nucleic acids (LNAs) probe dually labeled with biotin and carboxyfluorescein molecule (FAM). The probe is immobilized at a streptavidin-modified electrode surface via the biotin-streptavidin bridge, and FAM serves as an affinity tag for the peroxidase conjugate binding. Initially, the immobilized hairpin probe was in the "closed" state in the absence of the target, which shielded FAM from being approached by the bulky anti-FAM-HRP conjugate due to the steric effect. Target binding opens the hairpin structure of the probe, the probe undergoes a significant conformational change, forcing FAM away from the electrode. As a result, the FAM label becomes accessible by the anti-FAM-HRP, and the target hybridization event can be sensitively transduced via the enzymatically amplified electrochemical current signal. This new biosensor demonstrates its excellent specificity for single-base mismatch and able to detect as little as 83 fM target DNA even in the presence of human serum. We also employed this sensor to directly detect PCR real sample with satisfactory results.     

Electrochemical sensor based on molecularly imprinted membranes at platinum nanoparticles-modified electrode for determination of 17β-estradiol

In this paper, an electrochemical sensor for 17β-estradiol (E2) based on the molecular imprinting polymer (MIP) membranes had been constructed. 6-mercaptonicotinic acid (MNA) and E2 were first assembled on the surface of platinum nanoparticles-modified glassy carbon electrode (PtNPs/GCE) by the formation of Pt-S bonds and hydrogen-bonding interactions, and subsequently the polymer membranes were formed by electropolymerization. Finally, a novel molecularly imprinted sensor (MIS) was obtained after removal of E2. Experimental parameters such as deposition time, scan cycles, pH value and accumulation condition were optimized. Under optimal conditions, the MIS exhibited a large adsorption capacity and high selectivity. A good linearity was obtained in the range of 3.0×10(-8)-5.0×10(-5)molL(-1) (r=0.996) with an estimated detection limit of 1.6×10(-8)molL(-1). MIS had been successfully used to analyze E2 in water samples without complex pretreatment. Meanwhile, the average recoveries were higher than 93.9% with RSD<3.7%. All results above reveal that MIS is an effective electrochemical technique to determine E2 real-time in complicated matrix.