Separation of three mouse metallothionein isoforms by free-solution capillary electrophoresis

We have used free-solution capillary electrophoresis (FSCE) to separate three distinct mouse metallothionein (MT) isoforms, MT-1, MT-2 and MT-3. FSCE was conducted in an uncoated fused-silica capillary (57 cm × 50 μm I.D., 50 cm to detector) using 50 mM sodium phosphate buffer adjusted to pH 7.0 or 2.0. At neutral pH, each of the three isoform peaks were well resolved from a mixture with the order of migration (MT-1> MT-2> MT-3) related to the net negative charge on the protein. At acidic pH, the migration order was reversed with MT-3 migrating fastest, suggesting MT-3 had a higher net positive charge than MT-2 or MT-1. UV absorbance spectra (190–300 nm) confirmed the presence of Zn in MT-1 and MT-2. MT-3, which was saturated with Cd to stabilize the protein, gave a spectrum characteristic of the Cd---S charge transfer (shoulder at ca. 250 nm). At pH 2.0, the absorbance spectra for all three mouse MTs were characteristic of the metal-free form of the protein (apothionein). Thus, FSCE conducted at neutral pH separates MT isoforms with their metals intact, whereas at pH 2.0, both the Zn and the Cd dissociate from the protein during the run.     

Identification of metallothionein isoforms with capillary zone electrophoresis using a polyacrylamide-coated tube

Metallothionein (MT) isoforms from various liver tissues were separated with capillary zone electrophoresis (CZE) using a polyacrylamide-coated tube at neutral pH. The electrophoresis was performed on MT-1 and MT-2 purified from mouse, rat, rabbit and human livers. The retention times of mouse and rat MT-1 coincided, while the retention times of rabbit and human MT-1 were longer. The retention times of MT-2 purified from the four sources were the same. MT-1 and MT-2 separated more definitely with N-2-hydroxyethylpiperazine-N′-2-ethanesulfonic acid (HEPES)-Tris buffer (25 mM, pH 7.4) than with N-tris(hydroxymethyl)methyl-3-aminopropane sulfonic acid (TAPS)-Tris buffer (25 mM, pH 7.7) or with N-(2-acetamido)iminodiacetic acid (ADA)-Tris buffer (25 mM, pH 7.4). In addition, liver MT isoforms prepared from Zn- or Cd-administered mice could be separated.     

Separation of the glucuronides of entacapone and its (Z)-isomer in urine by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatography (MECC) method was developed for the separation of the 3-O-glucuronides of entacapone and its (Z)-isomer, the two main urinary metabolites of entacapone in humans. Entacapone is a novel, potent inhibitor of catechol-O-methyltransferase (COMT) intended for use as an adjunct in the treatment of Parkinson’s disease. Urine samples spiked with synthetic 3-O-glucuronides were used to study the effects of running buffer pH, composition and applied voltage on separation of the closely migrating glucuronides. The 3-O-glucuronide of nitecapone, was used as internal standard. The greatest improvement in separation was achieved by increasing the running buffer ionic concentration. Changes in pH had little effect on the separation, whereas increase in sodium dodecyl sulfate (SDS) concentration slightly improved resolution. Baseline separation and good selectivity relative to urine components were achieved by using a phosphate (25 mM)–borate (50 mM)–SDS (20 mM) running buffer, pH 7.0, in a 75 μm×60/67 cm fused-silica capillary at 15 kV and a 335 nm cut-off filter in the UV detector. The limits of detection (LOD) at a signal-to-noise ratio of 3 were about 0.25 μg/ml (5.2·10 ⁻⁷M) (injection 0.5 p.s.i./8 s). The linear detection range was 2–100 μg/ml (r²>0.999). Good repeatability of injection and relative migration times were obtained.     

Identification of metallothionein isoforms on capillary zone electrophoresis by adding anti-metallothionein antibody

The aim of this study was to identify metallothionein (MT) isoforms in mouse liver by using capillary zone electrophoresis (CZE). Purified MT-1 and MT-2 isoforms were completely separated by CZE using a polyacrylamide-coated tube at physiologic pH. There were two peaks in the cytosol fraction prepared from zinc-injected mouse liver, in which the migration times corresponded with those of purified MT-1 and MT-2 isoforms. When anti-MT monoclonal antibody was added with the purified MT-1 or MT-2 solution, the peaks decreased. Furthermore, the two peaks in the cytosol prepared from Zn-injected mouse liver decreased in a time-dependent manner from the electropherogram after the addition of the antibody. Therefore, those peaks were identified as MT-1 and MT-2 isoforms, respectively. In conclusion, the addition of anti-MT monoclonal antibody to the cytosol fraction of tissues is an effective method for identification of MT isoforms after separation using CZE.     

Enantiomeric separation of tramadol hydrochloride and its metabolites by cyclodextrin-mediated capillary zone electrophoresis

The enantiomeric separation of tramadol hydrochloride and its major metabolites, O-demethyltramadol (M1) and N-demethyltramadol (M2) was studied using cyclodextrin (CD)-mediated capillary zone electrophoresis (CZE). Influence of the choice of type and concentration of CD, capillary temperature, length of capillaries, buffer pH and the addition of polymer modifier on the chiral separation of tramadol and its metabolites was evaluated. It was found that the drug and the metabolites can be baseline-separated simultaneously by using 50 mM phosphate buffer (pH 2.5) containing 75 mM methyl-β-CD, 220 mM urea and 0.05% (w/v) hydroxypropylmethyl cellulose.     

Method of analysis of recombinant acidic fibroblast growth factor by capillary electrophoresis

Fibroblast growth factors are a series of well characterized proteins that have intriguing pharmacological properties. Acidic fibroblast growth factor (aFGF) recently appeared in the literature for its efficacy in spinal cord repair in rats. The protein has proven difficult to analyze by capillary electrophoresis, because it has a tendency to unfold, aggregate and precipitate, especially near and above physiological temperatures. By studying the turbidity of capillary electrophoresis running buffers and aFGF at 50°C, conditions were found that stabilize the aFGF solution, thereby allowing the capillary electrophoretic separation of the protein from its recombinant production impurities. The buffer system employs 50 mM phosphate buffer at pH 2.5 with 0.25% hydroxypropylmethylcellulose (HPMC) additive. This system provided the best efficiency and selectivity of the systems studied and was developed for pharmaceutical purity analysis. © 1997 Elsevier Science B.V.     

Application of a polyamine-coated capillary to the separation of metallothionein isoforms by capillary zone electrophoresis

In this study a fused-silica capillary treated internally with a polyamine coating which reverses electroosmotic flow in the direction of the anode was evaluated for its ability to resolve metallothionein (MT) isoforms. Analysis of different MTs purified from liver and kidney tissue revealed the following numbers of putative isoform peaks resolved: rabbit (3–6); horse (3–5); rat (2–3), chicken (1); human MT-1 (5–6); sheep (4–5) and pig (4–5). The greater degree of MT isoform heterogeneity detected in this study using the polyamine-coated capillary suggested a higher resolving capacity for capillary zone electrophoresis conducted with this capillary compared to an uncoated one. Using the single isoform of chicken MT (cMT) as a reference standard, relative standard deviations of 2.53, 1.85 and 2.21% for peak migration time, area and height, respectively, were observed for eight consecutive runs. A standard curve for cMT established linearity (r² = 0.99) for integrated peak area over three log units of cMT concentration with a lower limit of detection estimated to be 5 μg/ml. Acetonitrile extracts of chick liver tissue homogenates were successfully analyzed for the presence of MT isoforms from both control and zinc-injected animals. Based on our initial evaluation, capillary zone electrophoresis using the polyamine-coated capillary appears to be a very useful analytical method for the separation and quantification of individual MT isoforms.     

Investigation of metal complexes with metallothionein in rat tissues by hyphenated techniques.

The potential of hyphenated techniques based on a combination of microbore reversed-phase (RP) HPLC or capillary zone electrophoresis (CZE) with inductively coupled plasma (ICP) or electrospray (ES) mass spectrometry (MS) was demonstrated for the characterization of metal complexes with metallothionein in rat liver and kidney. The mixture of MT complexes was isolated from the tissues by size-exclusion LC and further characterized in neutral pH conditions (pH 6.8-7.2) by RP-HPLC or CZE. The metal stoichiometry and the molar mass of the eluted complexes was measured by ICP-MS and ES-MS, respectively. An additional dimension to the analysis was achieved by post-column acidification of the chromatographic eluent that allowed the determination of the molecular weight of the demetallated complexes with 10-fold higher sensitivity. The approach allowed the detection of two major metallothionein (MT) isoforms (MT-1 and MT-2) in liver and one MT isoform in kidney. The actual number of peaks in chromatograms and electropherograms was bigger because of the formation of mixed Cd-Cu complexes of the same MT isoform that showed different hydrophobicities.     

High-performance separation methods in the analysis of a new peptide family: the galanins

An analytical investigation of a new peptide family, the human galanins and their fragments, was carried out by reversed-phase HPLC, capillary zone electrophoresis (CZE) at different pH values and micellar electrokinetic capillary chromatography (MECC) in phosphate-borate-sodium dodecyl sulphate buffer. None of the methods seems to be superior to the others. The complementary nature of the electrophoretic methods is obvious when the profiles of peptides are compared; impurities not separated by HPLC are separated by CZE or MECC and vice versa. With these three different separation methods, a more complex analytical control of the synthetic work can be achieved.     

Determination of metallothionein-1/metallothionein-2 ratios in the mouse liver and pancreas by capillary zone electrophoresis using a polyacrylamide-coated capillary at neutral pH

Metallothionein (MT) isoforms, MT-1 and MT-2, in biological specimens are clearly separated by capillary zone electrophoresis (CZE) using a polyacrylamide-coated capillary. The effectiveness of CZE analysis in the study of MT isoforms in biological specimens is discussed. We did two experiments to determine the MT-1/MT-2 ratio in biological specimens. The ratio of MT-1/MT-2 can be determined by CZE under a neutral pH without any detergents. One of these studies is time-dependent changes of the MT-1/MT-2 ratio in the cytosol of the pancreas and liver in mice after Zn or Cd injection. In the pancreas, both isoforms were detected in the control mice and the ratio of MT-1/MT-2 was below 1.0. When Zn was injected, the maximum peak areas of both isoforms were obtained at 24 h, and the ratios increased over a value of 1.0 at 3 h and peaked at 10 h. However, in the Cd-injected mice, the peak areas of both isoforms increased up to 72 h, and the ratios were below 1.0 up to 72 h. On the contrary, neither isoform was detected in the livers of control mice. The ratios of Zn-injected mice liver were near the value 1.0 between 6 and 72 h, although the areas of both isoforms showed peaks at 48 h. The ratios of Cd-injected mice livers were detected to be over 1.0 from 10 h, but there were no significant difference between 10 and 72 h, and the areas of both isoforms showed peaks at 24 h. The other experiment investigated the ratio in each fraction of cell fractionation. Cell fractionation was done in the livers of Zn-treated mice. Twenty-four hours after the injection, the ratio of MT-1/MT-2 was 0.80+/-0.12 and 1.19+/-0.21 (mean+/-SD) in nuclear and cytosol fractions, respectively. Neither isoform was detected in mitochondrial or microsomal fraction. From the present results, CZE analysis is a suitable method for observation of the ratio of MT-1/MT-2 in biological specimens, and dynamic changes in both isoforms can be detected.     

Separation of biologically active peptides by capillary electrophoresis and high-performance liquid chromatography

HPLC and CE have been applied to the separation of some newly synthesized substances, including nonapeptides from the intrachinary region of insulin, insulin-like growth factors I and II (IGF I and II) and some penta- and hexapeptides. All the peptides are satisfactorily separated using a reversed-phase HPLC system with a C₁₈ stationary phase and mobile phases of 20–40% acetonitrile (v/v) and 0.2% trifluoroacetic acid in water (v/v). The best CE separation of IGF I and II has been achieved in a 30 mM phosphate buffer (pH 4–5), whereas 150 mM phosphoric acid (pH 1.8) is optimal for the insulin nonapeptides. The latter electrolyte is also suitable for the CE separation of the hexapeptides, as is a micellar system containing 20 mM borate-50mM sodium dodecyl sulfate (pH 9.0). Complete CE resolution of the d- and l-forms is possible in a 50 mM phosphate buffer (pH 2.5) containing 10 mM β-cyclodextrin. UV spectrophotometric detection was used throughout, at wavelengths from 190 to 215 nm. The CE procedures are, in general, preferable to HPLC separations, as they exhibit better separation efficiencies, are faster and consume smaller amounts of analytes and reagents.     

Enhanced separation and detection of serum bilirubin species by capillary electrophoresis using a mixed anionic surfactant—protein buffer system with laser-induced fluorescence detection

The four major bilirubin species in serum are separated by capillary electrophoresis and detected using laser-induced fluorescence detection. The optimum buffer system consists of 40 mM sodium dodecyl sulfate (SDS)—0.012 mM bovine serum albumin (BSA). The use of the SDS—BSA mixture in the mobile phase allows for the separation of four major bilirubin species at physiological pH with untreated capillaries. The results show that the use of BSA as a run buffer modifier in SDS solution improves separation efficiency and increases sample solubility via pH changes of the run buffer. The limits of detection for the bilirubin species using laser-induced fluorescence are between 30 and 150 nM, depending on the bilirubin species; not only is this approximately two orders of magnitude lower than with visible-light absorption methods, it allows the bilirubin species in normal sera to be quantitatively measured without sample pretreatment.     

Separation and quantitation of azimilide and its putative metabolites by capillary electrophoresis

Reliable methods based on capillary electrophoresis (CE) have been developed for the separation and quantitation of azimilide, an antiarrhythmic drug under development at Procter & Gamble Pharmaceuticals (P&GP). Both capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MECC) were employed in the separation of azimilide from its impurities, degradants and/or metabolites. Separation of azimilide from NE-11178, F-410, F-1054 and F-1292 was obtained by MECC at pH 9 with 50 mM sodium dodecyl sulfate (SDS). The separation of azimilide and NE-10171, a key metabolite of azimilide, was difficult because their structures differ by only a single methyl group. The best separation was achieved under acidic pH conditions with cetyltriethyl ammonium chloride (CTAC) additive in the buffer. All of the CE separations were completed within a substantially shorter time and with better resolution than the corresponding high-performance liquid chromatography (HPLC) separations. Quantitation was done with azimilide and NE-10171. Calibration curves ranging from 10 to 1000 μg/ml were obtained with R² greater than 0.997 for both azimilide and NE-10171. The back-calculated concentrations of the calibration standards and the recoveries of the quality control (QC) samples were within the acceptance range currently used for HPLC methods. These results demonstrated the viability of CE as an alternative technique for drug metabolism studies in support of pharmaceutical development.     

Metalloprotein analysis by capillary isoelectric focusing

Capillary isoelectric focusing (cIEF) was used to analyze three metalloproteins: conalbumin, transferrin and metallothionein (MT). Two different ampholyte mixtures were employed that generated linear pH gradients of 3–10 and 5–8. Several different proteins and one peptide known isoelectric points (pIs) were used to establish linear relationships between peak migration time and pI. These standards were also used as internal markers to estimate peak pI values of the metalloproteins subjected to cIEF. Conalbumin (iron-free) subjected to cIEF with a pH gradient of 3–10 yielded a single major component (pI 7.17). When the protein was saturated with iron (2 Fe³⁺/mol protein), a shift to lower pI was observed with a major peak (pI 6.24) and a lesser peak (pI 6.09). Mixing iron-free with iron-saturated conalbumin or adding iron to iron-free conalbumin prior to cIEF produced an additional peak (pI 6.68) that was presumed to be conalbumin containing a single iron atom (monoferric form). Human transferrin subjected to cIEF with a pH range of 3–10 gave a similar separation pattern to conalbumin with four major peaks at pI values of 6.25 (apotransferrin), 5.96 (monoferric form), 5.48 and 5.34 (differic forms). Additional resolution of the molecular forms of both conalbumin and transferrin was achieved using a narrower pH gradient (5–8). Rabbit liver MT subjected to cIEF with a pH gradient of 3–10 gave a complex separation pattern with two prominent peaks (pI values of 3.73 and 3.56) that were presumed to be the fully metal-saturated MT-1 and MT-2 isoforms. When individual MT isoforms (MT-1 and MT-2) were separately subjected to cIEF with a pH gradient of 3–10, heterogeneous peaks with higher pI values (4.12–4.74) were observed. In contrast, horse kidney MT gave a single predominant peak with a pI of 4.09. MT samples could be separated using pH gradient of 5–8 despite the fact that their apparent pI values were below the limits of the pH gradient established. In general, the heterogeneity observed for conalbumin, transferrin and MT proteins subjected to cIEF reflects the presence or absence of bound metal. Thus, cIEF represents a potentially useful analytical method which can provide information concerning the metal-binding characteristics of these and perhaps other metalloproteins.     

Separation of the enantiomers of some racemic nonsteroidal aromatase inhibitors and barbiturates by capillary electrophoresis

High-performance capillary electrophoresis (HPCE) and micellar electrokinetic capillary chromatography (MECC) were applied to the resolution of racemic nonsteroidal antiaromatase drugs and intermediates. Successful results were obtained in both modes using α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), γ-cyclodextrin (γ-CD), or 2,6-di-O-methyl-β-cyclodextrin (DM-β-CD) as chiral selectors. Depending on the structure of the solute, one of the cyclodextrins was generally better suited for resolution of the racemate. The basic solutes were analyzed under HPCE conditions, whereas the nonionizable compounds such as glutethimide (Doriden®) were analyzed in MECC mode. For the azole-type antiaromatase Fadrozole, both HPCE and MECC modes could be used to achieve the separation of the enantiomers. The influence of experimental factors such as pH, the presence of organic modifier, temperature, the micelle concentration, and the concentration of the chiral selector is also discussed on the basis of the results obtained with some chiral barbiturates. The possibility of analyzing the enantiomers directly in plasma samples was also demonstrated. © 1993 Wiley-Liss, Inc.     

Separation of olanzapine,carbamazepine and their main metabolites by capillary electrophoresis with pseudo-stationary phases

Conditions were worked out for the separation of carbamazepine, olanzapine, and their main metabolites carbamazepine 10,11-epoxide, 10-hydroxycarbamazepine, and desmethylolanzapine. The separation was based on electrokinetically driven methods in the capillary format. The main difficulty in separating these compounds is related to their different chemical classes. Whereas the carbamazepine members are amides, and are electrically neutral, the olanzapine members have aliphatic amino groups and are thus cationic under most experimental conditions. Different additives were applied as pseudo-stationary phases to implement selectivity. Poly(diallyldimethylammonium), PDADMA, is a polycationic replaceable and soluble polymer, that interacts mainly according to the polarisability of the analyte molecules. The MEKC principle was applied with the common SDS as micelle former. In both systems, only partial resolution of the analytes was obtained. The most favorable system consisted of a charged, oligomeric additive: full separation of all analytes within 4 min was achieved with heptakis-6-sulfato-β-cyclodextrin (7 mM) in 30 mM borate buffer, pH 8.5.     

Capillary zone electrophoresis of collagen type I CNBr peptides in acid buffers

Collagen type-I CNBr peptides were separated under acidic conditions by capillary electrophoresis. Separation conditions were: 100 mM phosphate buffer pH 2.5, 50 cm × 50 μm capillary (placed in a cartridge), 8 kV, running time 30–45 min, detection by UV at 200 nm. The peptides were separated strictly by their molecular mass and the overall pattern was well comparable to RP-HPLC separations of these analytes. It is proposed that the separation mechanism may involve hydrophobic sorptions to the capillary wall.     

Analysis of creatinine, vanilmandelic acid, homovanillic acid and uric acid in urine by micellar electrokinetic chromatography

A simultaneous determination of vanilmandelic acid, homovanillic acid, creatinine and uric acid using capillary electrophoresis was investigated. The optimum conditions of buffer concentration, pH and surfactant concentration were studied, and high resolution was obtained using a 30 mM phosphate buffer (pH 7.0) containing 150 mM sodium dodecyl sulfate. The detection was by UV absorbance at 245 nm and the column was a fused-silica capillary of 67 cm×75 μm I.D.. The determination of these metabolites in human urine was completed within 15 min without any interferences.     

High-speed electrophoretic separation of DNA fragments using a short capillary

Capillary electrophoresis using a replaceable gel buffer was applied to the separation of DNA fragments. A short effective length capillary (1–2 cm) at low electric field allowed the separation of a 20–1000 bp ladder in 1 min. Although similar separation speed was achieved with a longer capillary at high field, the resolution of larger fragments was degraded. The short effective length capillaries were able to separate the wildtype and mutant PCR products of the TGF-β₁ gene in under 45 s.     

High-performance liquid chromatographic methods for the analysis of haloperidol and chlorpromazine metabolism in vitro by purified cytochrome P450 isoforms

Sensitive HPLC methods for the resolution and quantitation of metabolites of both haloperidol and chlorpromazine metabolism have been developed for use in in vitro reconstitution assays with purified P450 isoforms. Separation of haloperidol metabolites was accomplished using a Hypersil CPS column with a mobile phase of 67% acetonitrile and 10 mM ammonium acetate, pH 5.4. Separation of chlorpromazine metabolites was achieved using an Ultrasphere cyano column with a mobile phase of 87.5% acetonitrile, 5% methanol, 3% 0.12 M sodium acetate, 3% 0.12 M ammonium acetate, 0.01% diethylamine and 0.01% triethylamine, pH 9.5. Sharp resolution was observed for haloperidol and three of its major metabolites and for chlorpromazine and five of its major metabolites. Varying levels and combinations of these metabolites are formed during in vitro incubations of parent compound with purified P450 isoforms 1A1 and 2B1 in a reconstituted system.