Further sequence analysis of the phage lambda receptor site. Possible implications for the organization of the lamB protein in Escherichia coli K12

We present the DNA sequence alterations due to seven lamB missense mutations yielding resistance to phages lambda and K10. They reveal five different amino acid positions in the LamB protein. Three positions (245, 247 and 249) define a new region required for phage adsorption. The two other positions (148 and 152) belong to a region where mutations to phage resistance has already been detected. These two regions are hydrophilic and could belong to turns of the protein located at the surface of the cell. All the missense mutational alterations to phage resistance sequenced in the LamB protein correspond to 10 sites located in four different segments of the polypeptide chain. We discuss their location in terms of the notion of phage receptor site and of a working model for the organization of this protein in the outer membrane of Escherichia coli.     

Maltose transport and starch binding in phage-resistant point mutants of maltoporin. Functional and topological implications

The relationships between the bacteriophage lambda binding site, the starch binding site and the pore formed by maltoporin (LamB protein, lambda receptor protein) were investigated. Bacteria with single amino acid substitutions in the maltoporin sequence, which were previously shown to be strongly reduced in phage lambda sensitivity, were assayed for maltose- (and maltodextrin) selective pore functions. Maltose transport assays was performed at low substrate concentrations, under conditions where LamB is limiting for transport. It revealed three classes of mutants. Class A is composed of mutants with no effect on transport (substitutions at amino acid residues 154, 155, 259, 382 and 401); class B corresponds to mutants with a significant but variable reduction in transport (sites 148, 151, 152, 163, 164, 245, 247 and 250); class C is represented by a single mutant for which transport is almost completely abolished (site 18). Starch binding was assayed by two different methods that gave compatible results. In class A mutants, binding was normal, while no binding was observed in the class C mutant. Binding was impaired to various extents in category B mutants. There was a correlation between the level of impairment of starch binding and impairment of maltose transport, consistent with the notion that the residues influencing starch binding are inside, or in close proximity to, the pore. These results, together with previous data on starch-binding mutants that were not affected in phage binding (substitutions at residues 8, 74, 82, 118 and 121), suggest that the binding sites for starch and phage lambda overlap but are distinct. Mutations affecting transport and starch binding are located in the first third of the protein and in the region of residues 245 to 250. Mutations affecting phage adsorption are located mainly in the last two-thirds of the protein. The topological constraints suggested by the results with the available mutants altered in the lamB gene were used to propose a revised model of maltoporin folding across the outer membrane as well as to define the outlines of footprints of macromolecular binding sites (phage, starch and monoclonal antibodies) on the surface of the protein.     

Mutations affecting antigenic determinants of an outer membrane protein of Escherichia coli.

The Escherichia coli LamB protein is located in the outer membrane. It is both a component of the maltose and maltodextrin transport system, and the receptor for phages lambda and K10. It is a trimer composed of three identical polypeptide chains, each containing 421 residues. Six independent mutants have been isolated, in which the LamB protein is altered in its interaction with one or more monoclonal antibodies specific for regions of the protein that are exposed at the cell surface. Some of the mutations also altered the binding site for phage lambda. All of the mutations were clustered in the same region of the lamB gene, corresponding to residues 333-394 in the polypeptide. This and previous results strongly suggest that a rather large segment of the LamB polypeptide, extending from residue 315 to 401, is exposed at the outer face of the outer membrane. This segment would bear the epitopes for the four available anti-LamB monoclonal antibodies that react with the cell surface, and part of the binding site for phage lambda.     

Combinatorial mutagenesis of the lamB gene: residues 41 through 43, which are conserved in Escherichia coli outer membrane proteins, are informationally important in maltoporin structure and function.

A new strategy for combinatorial mutagenesis was developed and applied to residues 40 through 60 of LamB protein (maltoporin), with the aim of identifying amino acids important for LamB structure and function. The strategy involved a template containing a stop codon in the target sequence and a pool of random degenerate oligonucleotides covering the region. In vitro mutagenesis followed by selection for function (Dex+, ability to utilize dextrins) corrected the nonsense mutation and simultaneously forced incorporation of a random mutation(s) within the region. The relative importance of each residue within the target was indicated by the frequency and nature of neutral and deleterious mutations recovered at each position. Residues 41 through 43 in LamB accepted few neutral substitutions, whereas residues 55 through 57 were highly flexible in this regard. Consistent with this finding was that the majority of defective mutants were altered at residues 41 to 43. Characterization of these mutants indicated that the nature of residues 41 to 43 influenced the amount of stable protein in the outer membrane. These results, as well as the conserved nature of this stretch of residues among outer membrane proteins, suggest that residues 41 to 43 of LamB play an important role in the process of outer membrane localization.     

Demonstration of a bacteriophage receptor site on the Escherichia coli K12 outer-membrane protein OmpC by the use of a protease

The Escherichia coli K12 outer-membrane proteins OmpA, OmpC, OmpF, PhoE, and LamB (all of transmembrane nature) can serve as phage receptors. We have shown previously that one OmpA-specific phage, Ox2, can give rise to the host range mutants Ox2h10 and Ox2h12, with the latter being derived from the former [Morona, R. & Henning, U. (1984) J. Bacteriol. 159, 579-582]. Unlike Ox2, both host range phages can use the OmpA and OmpC proteins as receptors and Ox2h12 is better adapted to the OmpC protein than Ox2h10. In a search for the site(s) of OmpC protein involved in phage recognition, it was found that proteinase K is able to cleave all of the proteins mentioned above. OmpC protein (Mr = 38306) could be cleaved from outside the cell by proteinase K resulting in two fragments of Mr approximately equal to 21000 and Mr approximately equal to 17500. The use of OmpC-PhoE hybrid proteins allowed us to assign the approximately equal to 21000-Mr fragment to the CO2H-terminal moiety of the protein. Proteinase K treatment of intact cells abolished their activity to neutralize the OmpC-specific phage Tulb and reduced this ability towards phage Ox2h12. The OmpA, OmpF, PhoE and LamB proteins were cleaved by the protease not in intact cells but only when acting on cell envelopes. The sizes of the OmpC protein fragments and the results obtained with the hybrid proteins very strongly suggest that the protein is cleaved from outside the cell at a region involving amino acid residues 150-178 of the 346-residue protein, which shows homology to two regions of the OmpA protein which are involved in its phage receptor site (loc. cit.). These areas also exhibit some homology to a region of the LamB protein which is thought to be part of this protein's receptor site [Charbit et al. (1984) J. Mol. Biol. 175, 395-401]. This suggests that there is a common denominator for proteinaceous phage receptor site because the LamB-specific phage lambda and phage Tulb are of completely different nature. We conclude that the region of the OmpC protein in question is cell-surface-exposed and acts as a phage receptor site.     

Genetic analysis of sequences in maltoporin that contribute to binding domains and pore structure.

Maltoporin (LamB protein) is a maltodextrin transport protein in the outer membrane of Escherichia coli with binding sites for bacteriophage lambda and maltosaccharides. Binding of starch by bacteria was found to inhibit swarming of Escherichia coli in soft agar plates; the inhibition was dependent on the maltodextrin affinity of maltoporin. On the basis of this observation, chemotactic cell-sorting techniques were developed for the isolation and analysis of mutants with an altered starch-binding phenotype. Fifteen lamB mutations generated by hydroxylamine and linker mutagenesis, as well as spontaneous mutations, were analyzed. The effects of the mutations on starch and lambda-binding, as well as transport specificity, were assayed. Mutations that affect residues near 8 to 18, 74 to 82, and 118 to 121 were found to affect starch binding and maltodextrin-selective functions strongly, confirming and extending previous results with substitutions at these regions. Substitutions and insertions in two previously undefined regions in the protein, in or near residues 194 and 360, also resulted in defects in maltodextrin-specific functions and indicate that C-terminal parts of the protein also contribute to the discontinuous binding and pore domains. There was a detectable transport defect in all binding-affected mutants, and one mutation caused near-total pore blocking towards both maltose and nonmaltoside. The highly discontinuous phage lambda-binding site was affected by mutations near residues 9 and 10 and 194, as well as previously established regions near residues 18, 148 to 165, 245 to 259, and 380 to 400. The significance of these mutations is discussed in the context of a model of the functional topology of maltoporin. The additional role of regions near residues 10 and 120 in maltoporin assembly, as well as starch binding, was suggested by the temperature-sensitive biogenesis of maltoporin in strains with one- or two-codon insertion at these sites.     

Genetic identification of the pore domain of the OmpC porin of Escherichia coli K-12.

We have isolated and characterized 31 mutations in the ompC gene which allow Escherichia coli to grow on maltotriose (Dex+) in the absence of the LamB and OmpF porins. These ompC(Dex) mutations include single-base-pair substitutions, small deletions, and small insertions. DNA sequence analysis shows that all of the alterations occur within the coding region for the first 110 amino acids of mature OmpC. The 26 independent point mutations repeatedly and exclusively alter residues R37, R74, and D105 of mature OmpC. In each case, a charged amino acid is changed to an uncharged residue. Biochemical and physiological tests suggest that these alterations increase the size of the pore channel. Starting with three different ompC(Dex) strains with alterations affecting R74, we isolated mutants that could grow on maltohexose (Hex+). These mutants each contained a second alteration in the ompC gene involving residues R37, D105, or R124. The combined effects on pore function of the two mutations appear to be additive. These experiments suggest that we have identified the important residues of OmpC peptide involved in pore function. On the basis of these mutations and general rules for membrane protein folding, a model for the topology of the OmpC protein is proposed.     

Occurrence of motifs with six amino acid residues in three eukaryotic proteomes

Now it is known that 18 neurological inherited diseases connected with mutations of multiple insertion of one amino acid residue in protein sequence. Therefore, studying the functional role of such simple motifs is an important task in biology. In this work we have investigated how often homorepeats, i.e. runs of a single amino acid residue, of 6 amino acid residues long as well as simple motifs consisting from two amino acid residues of 6 residues long situated in any position occur in three eukaryotic well studied proteomes: Homo sapiens, Drosophila melanogaster, Caenorhabditis elegans. It turns out that many simple motifs occur very often. The occurrence for each motif can be found at our site: http://antares.protres.ru/motifs_six_residues.html. One can suggest that such short similar motifs are responsible for the common functions for nongomologous, unrelated proteins from different organisms.     

Mutagenesis by random linker insertion into the lamB gene of Escherichia coli K12

Summary Gene lamB encodes an outer membrane protein involved in maltose and maltodextrin transport as well as phage adsorption. The active form is a trimer. We characterized 11 mutations in lamB, obtained after random insertion of a BamH1 linker and screening for stable immunodetectable mutant proteins. Six mutations resulted in the loss of the distal part of the LamB protein either by deletion (five cases) or frameshift (one case). The six corresponding proteins had all lost the ability to confer phage sensitivity and the capacity to grow on dextrins, and to yield immunnodetectable oligomers. Induction of a high level of the four longest of these proteins was toxic to the cell. Five other mutations were due to in-frame insertions. In four cases, the corresponding proteins still had the ability to yield immunodetectable oligomers, to confer phage sensitivity and the capacity to grow on dextrins and were not toxic on induction. In one case (AJC73), the mutant protein had lost the first three properties and was toxic on induction. Deletions and duplications between some of the inserts were also constructed and studied. To account for our results we present a hypothetical scheme in which trimerization would not only be needed for phage sensitivity and growth on dextrins but also for proper insertion into the outer membrane. The C-terminus of the protein, as well as other regions such as the site of mutation AJC73, would be required for the formation of stable trimers. We tentatively interpret toxicity as due to improper insertion into the outer membrane. Our results also show that it is possible to insert several amino acids (up to 11 in one case) at a number of positions in LamB without appreciably affecting its export and activities.     

DNA sequence analysis of the oli1 gene reveals amino acid changes in mitochondrial ATPase subunit 9 from oligomycin-resistant mutants of Saccharomyces cerevisiae

The nucleotide sequence of the oli1 gene encoding mitochondrial ATPase subunit 9 (76 amino acids) has been determined for five oligomycin-resistant mutants of Saccharomyces cerevisiae. Three of the mutations affect amino acids in the vicinity of the glutamic acid residue 59 at which dicylohexyl carbodiimide binds. Two other mutations lead to substitution of amino acid 23, which would lie very close to residue 59 in the folded hairpin conformation that this protein is thought to adopt in the inner mitochondrial membrane. The apposition of residues 23 and those adjacent to residue 59, lying respectively in the two hydrophobic membrane-spanning arms of subunit 9, is considered to constitute an oligomycin-binding domain. By consideration of the amino acid substitutions in those mutants cross-resistant to venturicidin, a domain of resistance for venturicidin is defined to lie within the oligomycin-binding domain, also centered on residues 23 and 59. These data also clarify the genetic recombination behaviour of alleles previously defined to form part of the oli3 locus (mutants characterized by resistance to both oligomycin and venturicidin) together with alleles defined to form part of the oli1 locus (mutants not cross-resistant to venturicidin). The oli1 and oli3 loci can now be seen to form two overlapping extended groups within the oli1 gene, with sequenced oli3 mutations being as far apart as 125 nucleotides within the subunit 9 coding region of 231 nucleotides.     

Epitope mapping by cysteine mutagenesis: Identification of residues involved in recognition by three monoclonal antibodies directed against LamB glycoporin in the outer membrane of Escherichia coli

Abstract Site-directed mutagenesis of the lamB gene was used to introduce individual cysteine substitutions at 20 sites in two regions (surface loops L7 and L8) of LamB protein significant in antibody recognition. Characterisation of cysteine mutants involved immunoblotting with three surface-specific monoclonal antibodies (mAb72, mAb302, mAb347) before and after incubation with thiol-specific reagents. In contrast to an earlier study that showed no amino acid changes affecting recognition by all three antibodies, changes at six amino acids were found to influence a common core epitope. These core sites included one residue (T336) in the predicted loop L7 containing amino acids 329–342 and four (Y379, N387, N389, K392, F398) in the large surface loop involving residues 370–412. Individual antibodies made additional but distinct contacts within the two studied regions, with mAb347 binding the most different and affected by seven substitutions in the 328–338 regions. The lamB mutants were also tested for phage λ receptor activity and starch binding before and after thiol modification and were useful in extending previous maps of these ligand binding sites.     

A leucine repeat motif in AbiA is required for resistance of Lactococcus lactis to phages representing three species.

The abiA gene encodes an abortive bacteriophage infection mechanism that can protect Lactococcus species from infection by a variety of bacteriophages including three unrelated phage species. Five heptad leucine repeats suggestive of a leucine zipper motif were identified between residues 232 and 266 in the predicted amino acid sequence of the AbiA protein. The biological role of residues in the repeats was investigated by incorporating amino acid substitutions via site-directed mutagenesis. Each mutant was tested for phage resistance against three phages, φ31, sk1, and c2, belonging to species P335, 936, and c2, respectively. The five residues that comprise the heptad repeats were designated L234, L242, A249, L256, and L263. Three single conservative mutations of leucine to valine in positions L235, L242, and L263 and a double mutation of two leucines (L235 and L242) to valines did not affect AbiA activity on any phages tested. Non-conservative single substitutions of charged amino acids for three of the leucines (L235, L242, and L256) virtually eliminated AbiA activity on all phages tested. Substitution of the alanine residue in the third repeat (A249) with a charged residue did not affect AbiA activity. Replacement of L242 with an alanine elimination phage resistance against φ31, but partial resistance to sk1 and c2 remained. Two single proline substitutions for leucines L242 and L263 virtually eliminated AbiA activity against all phages, indicating that the predicted alpha-helical structure of this region is important. Mutations in an adjacent region of basic amino acids had various effects on phage resistance, suggesting that these basic residues are also important for AbiA activity. This directed mutagenesis analysis of AbiA indicated that the leucine repeat structure is essential for conferring phage resistance against three species of lactococcal bacteriophages.     

A cluster of charged and aromatic residues in the C-terminal portion of maltoporin participates in sugar binding and uptake

The maltoporin LamB of Escherichia coli K12 is a trimeric protein which facilitates the diffusion of maltose and maltodextrins through the bacterial outer membrane, and also acts as a non-specific porin for small hydrophilic molecules as well as a receptor for phages. Loop L9 (residues 375 to 405) is the most distal and largest surface-exposed loop of LamB. It comprises a central portion, which varies in size and sequence in the maltoporins of known sequence, flanked by two conserved regions containing charged and aromatic residues. In order to identify the residues within the proximal region that are specifically involved in sugar utilization, we used site-directed mutagenesis to change, individually, each of the charged (five) and aromatic (three) residues in the region 371 to 379 into alanine. None of the eight single amino acid substitutions affected the phage receptor activity of LamB. In contrast, they all affected, to variable extents, maltoporin functions. For all the mutants, very good correlations were observed between the effects on sugar binding and on in vivo uptake. In no case were maltoporin functions completely abolished. Mutants E374 A and W376 A were the most impaired (with over 60% reduction in dextrin binding and in vivo uptake of maltose and maltopentaose). These two mutations also led to an increased bacterial sensitivity to bacitracin and vancomycin. The functional and structural implications are discussed. Received: 29 April 1998 / Accepted: 23 July 1998     

Interaction of bacteriophage lambda with its cell surface receptor: an in vitro study of binding of the viral tail protein gpJ to LamB (Maltoporin)

The cell surface receptor for bacteriophage Lambda is LamB (maltoporin). Responsible for phage binding to LamB is the C-terminal part, gpJ, of phage tail protein J. To study the interaction between LamB and gpJ, a chimera protein composed of maltose binding protein (MBP or MalE) connected to the C-terminal part of J (gpJ, amino acids 684-1131) of phage tail protein J of bacteriophage Lambda was expressed in Escherichia coli and purified to homogeneity. The interaction of the MBP-gpJ chimera protein with reconstituted LamB and its mutants LamB Y118G and the loop deletion mutant LamB Delta4+Delta6+Delta9v was studied using planar lipid bilayer membranes on a single-channel and multichannel level. Titration with the MBP-gpJ chimera blocked completely the ion current through reconstituted LamB when it was added to the cis side, the extracellular side of LamB with a half-saturation constant of approximately 6 nM in 1 M KCl. Control experiments with LamB Delta4+Delta6+Delta9v from which all major external loops had been removed showed similar blocking, whereas MBP alone caused no visible effect. Direct conductance measurement with His(6)-gpJ that contained a hexahistidyl tag (His(6) tag) at the N-terminal end of the protein for easy purification revealed no blocking of the ion current, requiring other measurements for the binding constant. However, when maltoporin was preincubated with His-gpJ, MBP-gpJ could not block the channel, which indicated that also His(6)-gpJ bound to the channel. High-molecular mass bands on SDS-PAGE and Western blots, confirming the planar lipid bilayer experiment results, also demonstrated stable complex formation between His(6)-gpJ and LamB or LamB mutants. The results revealed that phage Lambda binding includes not only the extracellular loops.     

Missense mutation in the lacI gene of Escherichia coli. Inferences on the structure of the repressor protein

The lac repressor has been studied extensively but a precise three-dimensional structure remains unknown. Studies using mutational data can complement other information and provide insight into protein structure. We have been using the lacI gene-repressor protein system to study the mutational specificity of spontaneous and induced mutation. The sequencing of over 6000 lacI- mutations has revealed 193 missense mutations generating 189 amino acid replacements at 102 different sites within the lac repressor. Replacement sites are not distributed evenly throughout the protein, but are clustered in defined regions. Almost 40% of all sites and over one-half of all substitutions found occur within the amino-terminal 59 amino acid residues, which constitute the DNA-binding domain. The core domain (residues 60 to 360) is less sensitive to amino acid replacement. Here, substitution is found in regions involved in subunit aggregation and at sites surrounding residues that are implicated in sugar-binding. The distribution and nature of missense mutational sites directs attention to particular amino acid residues and residue stretches.     

Signal sequence mutations as tools for the characterization of LamB folding intermediates

lamBA23DA25Y and lamBA23YA25Y tether LamB to the inner membrane by blocking signal sequence processing. We isolated suppressors of lamBA23DA25Y and lamBA23YA25Y, all of which mapped within the LamB signal sequence. Most interesting were mutations that changed an amino acid with a strong positive charge to an amino acid with no charge. Further characterization of two such suppressors revealed that they produce functional LamB that is localized to the outer membrane with its entire signal sequence still attached. Biochemical analysis shows that mutant LamB monomer chases into an oligomeric species with properties different from those of wild-type LamB trimer. Because assembly of mutant LamB is slowed, these mutations provide useful tools for the characterization of LamB folding intermediates.     

Halocidin: a new antimicrobial peptide from hemocytes of the solitary tunicate,Halocynthia aurantium

From hemocytes of the tunicate Halocynthia aurantium we purified a new antimicrobial peptide named halocidin. The native peptide had a mass of 3443 Da and comprised two different subunits containing 18 amino acid residues (WLNALLHHGLNCAKGVLA) and 15 residues (ALLHHGLNCAKGVLA), which were linked covalently by a single cystine disulfide bond. Two different monomers were separately synthesized and used to make three additional isoforms (15 residue homodimer, 18 residue homodimer, heterodimer). In antimicrobial assays performed with synthetic peptides of halocidin, it was confirmed that congeners of the 18 residue monomer were more active than those of the 15 residue monomer against methicillin-resistant Staphylococcus aureus and multidrug-resistant Pseudomonas aeruginosa.     

Structure and inherent properties of the bacteriophage lambda head shell. VII. Molecular design of the form-determining major capsid protein

Some mutations in the major capsid protein (gpE) of lambda phage can alter the size and shape of the head shell or block the pathway of head maturation. Previous studies on the classification of such mutants showed that there are at least five functional sites on the gpE molecule. In this study, we determined the amino acid exchanges by DNA sequencing to elucidate the molecular design of the form-determining multifunctional protein gpE. In addition, we characterized the mutated gpE molecules by two-dimensional gel electrophoresis and studied suppression patterns of amber mutants at 43 amino acid residues. Those mutations map at 19 amino acid residues at 22 bases, which are located in three regions, 40 to 91, 222 to 246, and 284 to 324 of the 341 amino acid residues of gpE. These regions seem to be important in the activity of gpE, since amber mutations in these regions are suppressed on the average by less species of suppressors than those outside these regions. The mutations having different phenotypes are not segregated from each other, while some mutations having the same phenotype are separated far apart in the primary structure. This suggests that the functional sites were formed during evolution after the folding pattern of the ancestral gpE polypeptide chain had been established. Many of the mutations are located at serine, glycine and proline residues in predicted beta-turns.     

Mutational analysis of the major coat protein of M13 identifies residues that control protein display

We have reported variants of the M13 bacteriophage major coat protein (P8) that enable high copy display of monomeric and oligomeric proteins, such as human growth hormone and steptavidin, on the surface of phage particles (Sidhu SS, Weiss GA, Wells JA. 2000. High copy display of large proteins on phage for functional selections. J Mol Biol 296:487-495). Here, we explore how an optimized P8 variant (opti-P8) could evolve the ability to efficiently display a protein fused to its N-terminus. Reversion of individual opti-P8 residues back to the wild-type P8 residue identifies a limited set of hydrophobic residues responsible for the high copy protein display. These hydrophobic amino acids bracket a conserved hydrophobic face on the P8 alpha helix thought to be in contact with the phage coat. Mutations additively combine to promote high copy protein display, which was further enhanced by optimization of the linker between the phage coat and the fusion protein. These data are consistent with a model in which protein display-enhancing mutations allow for better packing of the fusion protein into the phage coat. The high tolerance for phage coat protein mutations observed here suggests that filamentous phage coat proteins could readily evolve new capabilities.     

Specificity of Mnt 'master residue' obtained from in vivo and in vitro selections

Mnt is a repressor from phage P22 that belongs to the ribbon–helix–helix family of DNA binding factors. Four amino acids from the N-terminus of the protein, Arg2, His6, Asn8 and Arg10, interact with the base pairs of the DNA to provide the sequence specificity. Raumann et al. (Nature Struct. Biol., 2, 1115–1122) identified position 6 as a ‘master residue’ that controls the specificity of the protein. Models for the interaction have residue 6 of Mnt interacting directly with position 5 of the operator. In vivo selections demonstrated that protein variants at residue 6 bound specifically to operator mutations at that position. Operators in which the wild-type G at position 5 was replaced by T specifically bound to several different protein variants, primarily hydrophobic residues. The obtained protein variants, plus some others, were used in in vitro selections to determine their preferred binding sites. The results showed that the residue at position 6 influenced the preference for binding site bases predominantly at position 5, but that the effects of altering it can extend over longer distances, consistent with its designation as a ‘master residue’. The similarities of binding sites for different residues do not correlate strongly with common measures of amino acid similarities.