Photoluminescence properties of Pb5(PO4)3Br:RE (RE = Dy3+, Eu3+ and Tb3+) phosphor synthesised using solid-state method

This study describes the luminous properties of Pb₅(PO₄)₃Br doped with RE³⁺ (RE = Dy³⁺, Eu³⁺ and Tb³⁺) synthesised using the solid-state method. The synthesised phosphor was characterised using Fourier-transform infrared, X-ray diffraction, scanning electron microscopy and photoluminescence measurements. Dy³⁺-doped Pb₅(PO₄)₃Br phosphor exhibited blue and yellow emissions at 480 and 573 nm, respectively, on excitation at 388 nm. Eu³⁺-doped Pb₅(PO₄)₃Br phosphor exhibited orange and red emissions at 591 and 614 nm, respectively, on excitation at λ_ex = 396 nm. Pb₅(PO₄)₃Br:Tb³⁺ phosphor exhibited the strongest green emission at 547 nm on excitation at λ_ex = 380 nm. Additionally, the effect of the concentration of rare-earth ions on the emission intensity of Pb₅(PO₄)₃Br:RE³⁺ (RE³⁺ = Dy³⁺, Eu³⁺ and Tb³⁺) phosphors was investigated.     

Luminescence investigation of CaY2Al4SiO12:Dy3+ phosphor synthesized by sol–gel method

Dy³⁺-doped CaY₂Al₄SiO₁₂ phosphors were prepared using the sol–gel method. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy dispersive spectroscopy analyses (EDS) were used to analyse the crystal structure, morphology, and elemental composition of the prepared samples. The luminescence behaviour of the sample was investigated using photoluminescence (PL) and thermoluminescence (TL) techniques. The prepared CaY₂Al₄SiO₁₂:xDy³⁺ phosphor showed a characteristic blue and yellow emission at ~480 and 583 nm, respectively, with an excitation wavelength of 350 nm. The most intense PL emission was found for a 4 mol% doping concentration of Dy³⁺ ions. The CIE diagram of the phosphor showed bluish-white colour emission. For TL studies, the prepared phosphors were irradiated with a ⁶⁰Co γ (gamma) source and the TL glow curve of the CaY₂Al₄SiO₁₂:0.04Dy³⁺ phosphor showed three overlapped peaks. For the Gaussian peaks, Chen's peak shape method was applied to determine the kinetic parameters of the samples.     

Structural,photoluminescence, and optical characteristics of a Sm3+-doped lead borate–strontium–tungsten glass system: Evaluation of Judd–Ofelt intensity parameters and radiative properties

In this study, the melt quenching approach is used to synthesize a lead borate–strontium-based glass system doped with samarium ions. Modifications in the glass network structure arising from the addition of various concentrations of Sm³⁺ ions were investigated via Fourier transform infrared (FTIR) spectroscopy. FTIR analysis revealed B–O–B bridges, BO₃, and BO₄ units are present. UV–vis–NIR spectroscopic measurement was performed to study the optical absorption spectra. Optical constants such as optical bandgap energies, refractive indices, and other related parameters were evaluated. The lifetime fluorescence decay was measured and ranged between 1.04 and 1.88 ns. The photoluminescence spectra in the range 500–750 nm revealed four transitions from the ground state ⁶G_5/2 to the excited states ⁶H_5/2, ⁶H_7/2, ⁶H_9/2 and ⁶H_11/2 and J–O theory was utilized to study these optical transitions for Sm³⁺ ions. Calculations of the oscillator strengths and J–O intensity parameters were performed and the obtained J–O parameters followed the sequence Ω₄ > Ω₆ > Ω₂. The ratio O/R indicated a high lattice asymmetry around the samarium ions. The values of lifetimes and branching ratios for the fabricated samples emphasized their suitability to be used in laser applications. The current glass samples are good candidates for orange and red emission devices.     

Optical analysis of RE3+ (RE = Eu,Tb):MgLa2V2O9 nano-phosphors

Red and green rare-earth ion (RE³⁺) (RE = Eu, Tb):MgLa₂V₂O₉ micro-powder phosphors were produced utilizing a standard solid-state chemical process. The X-ray diffraction examination performed on the phosphors showed that they were crystalline and had a monoclinic structure. The particles grouped together, as shown in the scanning electron microscopy (SEM) images. Powder phosphors were examined using a variety of spectroscopic techniques, including photoluminescence (PL), Fourier-transform infrared, and energy dispersive X-ray spectroscopy. Brilliant red emission at 615 nm (⁵D₀ → ⁷F₂) having an excitation wavelength (λ_exci) of 396 nm (⁷F₀ → ⁵L₆) and green emission at 545 nm (⁵D₄ → ⁷F₅) having an λ_exci = 316 nm (⁵D₄ → ⁷F₂) have both been seen in the emission spectra of Tb³⁺:MgLa₂V₂O₉ nano-phosphors. The emission mechanism that is raised in Eu³⁺:MgLa₂V₂O₉ and Tb³⁺:MgLa₂V₂O₉ powder phosphors has been explained in an energy level diagram.     

Electrochemical and Thermodynamic Properties of Ln(III) (Ln?=?Eu,Sm, Dy,Nd) in 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid

The electrochemical behavior and thermodynamic properties of Ln(III) (Ln = Eu, Sm, Dy, Nd) were studied in 1-butyl-3-methylimidazolium bromide ionic liquid (BmimBr) at a glassy carbon (GC) electrode in the range of 293–338 K. The electrode reaction of Eu(III) was found to be quasi-reversible by the cyclic voltammetry, the reactions of the other three lanthanide ions were regarded as irreversible systems. An increase of the current intensity was obtained with the temperature increase. At 293 K, the cathodic peak potentials of −0.893 V (Eu(III)), −0.596 V (Sm(III)), −0.637 V (Dy(III)) and −0.641 V (Nd(III)) were found, respectively, to be assigned to the reduction of Ln(III) to Ln(II). The diffusion coefficients (D _o), the transfer coefficients (α) of Ln(III) (Ln = Eu, Sm, Dy, Nd) and the charge transfer rate constants (k _s) of Eu(III) were estimated. The apparent standard potential (E ⁰*) and the thermodynamic properties of the reduction of Eu(III) to Eu(II) were also investigated.     

Optical and thermal properties of rare earth–doped K4Ca(PO4)2 phosphor

The luminescent properties and energy transfer (ET) mechanism in the Ln³⁺ pair of the RE³⁺ (RE = Eu³⁺, Ce³⁺, Dy³⁺ and Sm³⁺) doped K₄Ca(PO₄)₂ phosphor were successfully investigated using a conventional high-temperature solid-state reaction. In the near infrared (NIR) range, Ce³⁺-doped K₄Ca(PO₄)₂ phosphor exhibited a UV–Vis. emission band, whereas K₄Ca(PO₄)₂:Dy³⁺ exhibited characteristic emission bands centred at 481 and 576 nm in the near-ultraviolet excitation range. The possibility of ET from Ce³⁺ to Dy³⁺ in K₄Ca(PO₄)₂ phosphor was confirmed by a significant increase in the photoluminescence intensity of the Dy³⁺ ion based on the spectral overlap of acceptor and donor ions. X-ray diffraction, Fourier-transform infrared and thermogravimetric analysis/differential thermal analysis TGA/DTA were carried out to study phase purity, presence of functional groups and amount of weight loss under different temperature regimes. Therefore, the RE³⁺-doped K₄Ca(PO₄)₂ phosphor may be a stable phosphor host for light-emitting diode applications.     

Structural and morphological diversity of (1-->3)-beta-D-glucans synthesized in vitro by enzymes from Saprolegnia monoïca. Comparison with a corresponding in vitro product from blackberry (Rubus fruticosus)

Detergent extracts of microsomal fractions from Saprolegnia mono?ca and blackberry (Rubus fruticosus) cells were incubated with UDP-glucose to yield in vitro (1-->3)-beta-d-glucans. The insoluble products were analyzed by conventional and cryo transmission electron microscopy, X-ray diffraction, and (13)C CP/MAS NMR, and their molecular weights were determined by light scattering experiments. All the products were microfibrillar, but for the detergent extracts from S. mono?ca, important morphological differences were observed when the pH of the synthesizing medium was modified. At pH 6, the product had a weight average degree of polymerization () exceeding 20 000 and consisted of endless ribbon-like microfibrils. The microfibrils obtained at pH 9 had a length of only 200-300 nm, and their was approximately 5000. Of all the in vitro (1-->3)-beta-d-glucans, the one from R. fruticosus had the shortest length and the smallest. Crystallographic and spectroscopic data showed that the three in vitro samples consisted of triple helices of (1-->3)-beta-d-glucans and contained substantial amounts of water molecules in their structure, the shortest microfibrils being more hydrated. In addition, the long microfibrils from S. mono?ca synthesized at pH 6 were more resistant toward the action of an endo-(1-->3)-beta-d-glucanase than the shorter ones obtained at pH 9. These results are discussed in terms of molecular biosynthetic mechanisms of fungal and plant (1-->3)-beta-d-glucans, and in relation with the possible existence of several (1-->3)-beta-d-glucan synthases in a given organism. The interpretation and discussion of these observations integrate the current knowledge of the structure and function of (1-->3)-beta-d-glucans.     

Transport of Eicosapentaenoic Acid-Derived PGE3, PGF3α, and TXB3 by ABCC4

Background

Eicosapentaenoic acid-derived prostaglandin (PG) E₃, PGF_3α, and thromboxane (TX) B₃ are bioactive lipid mediators which have anti-cancer and anti-inflammatory effects. To exert their effects, PGE₃, PGF_3α, and TXB₃ must be released to the extracellular space from cells, but the release mechanism has been unclear. We therefore investigated the contribution of ATP-binding cassette transporter C4 (ABCC4), which has been known as a prostanoids efflux transporter, to the release of PGE₃, PGF_3α, and TXB₃.

Materials and Methods

ATP-dependent transport of PGE₃, PGF_3α, and TXB₃ via ABCC4 was investigated by using inside-out membrane vesicles prepared from ABCC4-overexpressing HEK293 cells. To evaluate the contribution of ABCC4 to the release of PGE₃, PGF_3α, and TXB₃, we measured the extracellular and intracellular levels of PGE₃, PGF_3α, and TXB₃ in A549 cells when we used ABCC4 inhibitors (dipyridamole, MK571, and probenecid) or ABCC4 siRNAs. The quantification of PGE₃, PGF_3α, and TXB₃ was performed by using liquid chromatography-tandem mass spectrometry.

Results

The apparent K_m values for ABCC4-mediated transport were 2.9±0.1 µM for PGE₃, 12.1±1.3 µM for PGF_3α, and 11.9±1.4 µM for TXB₃ and the ATP-dependent accumulation of PGE₃, PGF_3α, and TXB₃ into vesicles was decreased by using typical substrates and inhibitors of ABCC4. ABCC4 inhibitors and ABCC4 knockdown showed the reduction of extracellular/intracellular ratio of PGE₃ (40–60% of control) and PGF_3α (60–80% of control) in A549 cells.

Conclusions

Our results suggest that PGE₃, PGF_3α, and TXB₃ are substrates of ABCC4 and ABCC4 partially contributes to the release of PGE₃ and PGF_3α.     

Molecular properties of phosphoenolpyruvate carboxylase from C3, C3−C4 intermediate,and C4 Flaveria species

Phosphoenolpyruvate carboxylase (PEPCase; EC 4.1.1.31) from Flaveria trinervia Mohr (C₄), F. floridana Johnston (C₃–C₄), and F. cronquistii Powell (C₃) leaves were compared by electrotransfer blotting/enzyme-linked immunoassay (Western-blot analysis), mobility of the native enzyme in polyacrylamide gels and in isoelectric focusing (IEF) gels, peptide mapping, and in-vitro translation of RNA isolated from each plant. The PEPCases from the C₃ and C₃–C₄ plants were very similar to each other in terms of electrophoretic mobilities on gels and isoenzyme patterns on IEF gels, and identical in peptide mapping. Quantitative differences were noted, however, in that the C₃–C₄ intermediate plant contained more PEPCase overall and that the relative activity of individual isoenzymes shifted between the C₃ and C₃–C₄ intermediate PEPCases. The PEPCase from the C₄ plant had a different isoenzyme pattern, a different peptide map, and was far more abundant than the other two enzymes. Western blot analysis demonstrated the cross-reactivity of PEPCases from all three Flaveria species with antibody raised against maize PEPCase. The results provide evidence, at the molecular level, that supports the view of C₃–C₄ intermediate species as C₃-like plants with some C₄-like photosynthetic characteristics, but there are differences from the C₃ plant in the quantity and properties of the PEPCase from the C₃–C₄ intermediate plant.Abbreviations IEF isoelectric focusing - kDa kilodalton - PEPCase phosphoenolpyruvate carboxylase - Rubisco Ribulose-1,5-bisphosphate carboxylase/oxygenase     

Structures, spectroscopic and thermodynamic properties of U2On (n = 0 ∼ 2, 4) molecules: a density functional theory study

The equilibrium structures, spectroscopic and thermodynamic parameters [entropy (S), internal energy (E), heat capacity (C _p)] of U₂, U₂O, U₂O₂ and U₂O₄ uranium oxide molecules were investigated systematically using density functional theory (DFT). Our computations indicated that the ground electronic state of U₂ is the septet state and the equilibrium bond length is 2.194 Å; the ground electronic state of U₂O and U₂O₂ were found to be $ {\tilde{X}}^3\varPhi $ and $ {\tilde{X}}^3{\sum}_{\mathrm{g}} $ with stable C _∞v and D _∞h linear structures, respectively. The bridge-bonded structure with D _2h symmetry and $ {\tilde{X}}^3{\mathrm{B}}_{1\mathrm{g}} $ state is the most stable configuration for the U₂O₄ molecule. Mulliken population analyses show that U atoms always lose electrons to become the donor and O atoms always obtain electrons as the acceptor. Molecular orbital analyses demonstrated that the frontier orbitals of the title molecules were contributed mostly by 5f atomic orbitals of U atoms. Vibrational frequencies analyses indicate that the maximum absorption peaks stem from the stretching mode of U–O bonds in U₂O, U₂O₂ and U₂O₄. In addition, thermodynamic data of U₂O_n (n?=?0?～?4) molecules at elevated temperatures of 293.0 K to 393.0 K was predicted.     

Induction of 2′,3′-cyclic nucleotide 3′-phosphohydrolase and morphological alterations in C6 glioma cells by dexamethasone, (3-butoxy-4-methoxybenzyl)-2-imidazolinone and prostaglandin E1

Summary Dexamethasone, R020-1724 and prostaglandin E₁ all induced morphological alterations and increased the glial specific enzyme 2′,3′-cyclic nucleotide 3′-phosphohydrolase (CNP) in rat C6 glioma cells in culture. Morphological alterations consisted mainly in the development of astrocytelike changes. Increases in dexamethasone-induced CNP activity was time dependent. Dexamethasone reduced cell growth rate, depending on the concentration employed. This paper is supported in part by N.I.M.H. Research Grant AA02372. Dr. S. Kamath participated initially in this study.     

The lipid peroxidation products 4-oxo-2-nonenal and 4-hydroxy-2-nonenal promote the formation of α-synuclein oligomers with distinct biochemical, morphological, and functional properties

Oxidative stress has been implicated in the etiology of neurodegenerative disorders with α-synuclein pathology. Lipid peroxidation products such as 4-oxo-2-nonenal (ONE) and 4-hydroxy-2-nonenal (HNE) can covalently modify and structurally alter proteins. Herein, we have characterized ONE- or HNE-induced α-synuclein oligomers. Our results demonstrate that both oligomers are rich in β-sheet structure and have a molecular weight of about 2000 kDa. Atomic force microscopy analysis revealed that ONE-induced α-synuclein oligomers were relatively amorphous, with a diameter of 40-80 nm and a height of 4-8 nm. In contrast, the HNE-induced α-synuclein oligomers had a protofibril-like morphology with a width of 100-200 nm and a height of 2-4 nm. Furthermore, neither oligomer type polymerized into amyloid-like fibrils despite prolonged incubation. Although more SDS and urea stable, because of a higher degree of cross-linking, ONE-induced α-synuclein oligomers were less compact and more sensitive to proteinase K treatment. Finally, both ONE- and HNE-induced α-synuclein oligomers were cytotoxic when added exogenously to a neuroblastoma cell line, but HNE-induced α-synuclein oligomers were taken up by the cells to a significantly higher degree. Despite nearly identical chemical structures, ONE and HNE induce the formation of off-pathway α-synuclein oligomers with distinct biochemical, morphological, and functional properties.     

Structural and electronic properties of Z isomers of (4α→6´´,2α→O→1´´)-phenylflavans substituted with R = H, OH and OCH₃ calculated in aqueous solution with PCM solvation model

In the search for new antioxidants, flavan structures called our attention, as substructures of many important natural compounds, including catechins (flavan-3-ols), simple and dimeric proanthocyanidins, and condensed tannins. In this work the conformational space of the Z-isomers of (4α→6′′, 2α→O→1′′)-phenylflavans substituted with R = H, OH and OCH₃ was scanned in aqueous solution, simulating the solvent by the polarizable continuum model (PCM). Geometry optimizations were performed at B3LYP/6-31 G** level. Electronic distributions were analyzed at a better calculation level, thus improving the basis set (6-311++G**). A topological study based on Bader′s theory (atoms in molecules) and natural bond orbital (NBO) framework was performed. Furthermore, molecular electrostatic potential maps (MEPs) were obtained and thoroughly analyzed. The stereochemistry was discussed, and the effect of the solvent was addressed. Moreover, intrinsic properties were identified, focusing on factors that may be related to their antioxidant properties. Hyperconjugative and inductive effects were described. The coordinated NBO/AIM analysis allowed us to rationalize the changes of MEPs in a polar solvent. To investigate the molecular and structural properties of these compounds in biological media, the polarizabilities and dipolar moments were predicted which were further used to enlighten stability and reactivity properties. All conformers were taken into account. Relevant stereoelectronic aspects were described for understanding the stabilization and antioxidant function of these structures.     

Structural and mechanistic insights provided by single particle cryo-EM analysis of phosphoinositide 3-kinase (PI3Kα)

Recent cryo-electron microscopic (cryo-EM) investigations have succeeded in the analysis of various structural conformations and functional states of PI3Kα, a dimer consisting of the catalytic subunit p110α and the regulatory subunit p85α of class IA of phosphoinositide 3-kinase. High resolution structures have been obtained of the unliganded and of BYL-719-bound PI3Kα. The latter provides information on excessively flexible domains of p85α that are then further analyzed with nanobodies and CXMS (chemical cross-linking, digestion and mass spectrometry). Analysis of p110α helical and kinase domain mutations reveals mutant-specific features that can be linked to the gain of function in enzymatic and signaling activities.     

Nitrogen Uptake by Wheat Seedlings,Interactive Effects of Four Nitrogen Sources: NO3?, NO2?, NH4+, and Urea

The net influx (uptake) rates of NO₃⁻, NH₄⁺, NO₂⁻, and urea into roots of wheat (Triticum aestivum cv Yecora Rojo) seedlings from complete nutrient solutions containing all four compounds were monitored simultaneously. Although urea uptake was too slow to monitor, its presence had major inhibitory effects on the uptake of each of the other compounds. Rates of NO₃⁻, NH₄⁺, and NO₂⁻ uptake depended in a complex fashion on the concentration of all four N compounds. Equations were developed which describe the uptake rates of each of the compounds, and of total N, as functions of concentrations of all N sources. Contour plots of the results show the interactions over the range of concentrations employed. The coefficients of these equations provide quantitative values for evaluating primary and interactive effects of each compound on N uptake.     

Synthesis,structure and properties of syn-bis(μ-N-methylpiperidine-4-thiolate tricarbonyl iron)

The reaction of Fe₃(CO)₁₂ with N-methyl-4- mercaptopiperidine gives the title compound. Crystals are monoclinic, space group P2₁/c with a = 12.922(2), b = 14.784(5), c = 13.607(2) Å, β = 112.41(1)°. With Z = 4 the calculated density is 1.49 g cm⁻³. Solution of the structure by direct methods led to a final weighted R factor of 0.029 for 2270 independent reflections. The FeFe bond length is 2.534(1) Å and the S···S distance of 2.940(1) suggests bonding interactions. By heating upon reflux in toluene during 10 h, the IR spectrum of the chromatographed solution indicates the syn isomer formation. The reaction with CH₃I and HClO₄ produces the methylation and protonation, respectively, of the nitrogen atoms of the piporidine rings giving rise to the formation of the [Fe(μ-(CH₃)₂NC₅H₉S)(CO)₃]₂I₂·2H₂O and [Fe(μ-HCH₃NC₅H₉S)(CO)₃]₂·H₂O·CH₃OH compounds.     

Structural and electronic properties of 4H-cyclopenta[2,1-b,3;4-b′]dithiophene S-oxide (BTO) derivatives with an S, S=O, O, SiH2, or BH2 bridge: semi-empirical and DFT study

In this paper, we theoretically studied the geometries, stabilities, and the electronic and thermodynamic properties of 4H-cyclopenta[2,1-b,3;4-b']dithiopene S-oxide derivatives (BTO-X, with X = BH(2), SiH(2), S, S=O, or O) using semi-empirical methods, ab initio methods, and density functional theory. The geometries and thermodynamic parameters calculated by PM3 were in good agreement with those calculated with B3LYP/6-31 G*. The band gap calculated using B3LYP/6-31 G* ranged from 3.94 eV (BTO-O) to 3.16 eV (BTO-B). The absorption λ(max) calculated using B3LYP/6-31 G* was shifted to longer wavelengths when X = BH(2), SiH(2), or S=O (due to their electron-withdrawing effects) and to shorter wavelengths for BTO-S and BTO-O as compared to the λ(max) for the thiophene S-oxide (2TO) dimer. The changes in ΔH°, ΔS°, and ΔG° calculated using both semi-empirical and DFT methods were quite similar.     

Assembly of microfibrils in vivo and in vitro from (1»3)-β-d-glucan synthesized by protoplasts of Saccharomyces cerevisiae

Polymer chains of (13)--d-glucan were dissolved with 1 M NaOH at 4° C from native microfibrillar protoplast nets. The chains associated into microfibrils during NaOH neutralization or dialysis. In contrast to the native microfibrils which are of uniform width individually (10 to 20 nm) and arranged in flat bundles, the microfibrils formed in vitro showed no band formation and consisted of fibrous spindle-shaped subunits of variable width or loose elementary fibrils about 1.7 nm wide. X-ray diagrams of native nets indicated a fairly high crystallinity and were different for wet and dry specimens. They corresponded to those of paramylon. Precipitated glucans produced diagrams different from the former and revealing a lower crystallinity especially with the dry samples.The X-ray pattern, combined with other data, allowed the precipitated microfibrils to be identified as aggregates of molecular strands composed each of three intertwined helical glucan chains. Since these triple helical chains are about 1.7 nm wide the elementary fibrils of this width can represent only single triple-helical strands. These helices have 7 glucose residues per turn and therefore a low symmetry which explains the poor crystallizing properties. The 7 membered helix represents a basic difference with the well crystallized native glucan which is built of highly symmetrical triple helices with 6 glucose residues per turn. Since 6₁ helical conformation is not formed in vitro at normal temperatures its generation in vivo must be due to the action of synthesizing enzymes at the protoplast membrane. The intertwining of these helices and crystallization of the strands are determined by their symmetry and physical properties of the chains. This characterizes the native microfibrils as products of self-assembly of enzymegenerated 6₁ helices.