Enhanced photocatalytic and electrochemical performance of hydrothermally prepared NiO-doped Co nanocomposites

In this study, we synthesize nanostructured nickel oxide (NiO) and doped cobalt (Co) by combining nickel(II) chloride hexahydrate (NiCl₂.6H₂O) and sodium hydroxide (NaOH) as initial substances. We analyzed the characteristics of the product nanostructures, including their structure, optical properties, and magnetic properties, using various techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet absorption spectroscopy (UV–Vis), Fourier transform infrared (FTIR) spectroscopy, and vibrating sample magnetometers (VSM). The NiO nanoparticles doped with Co showed photocatalytic activity in degrading methylene blue (MB) dye in aqueous solutions. We calculated the degradation efficiencies by analyzing the UV–Vis absorption spectra at the dye's absorption wavelength of 664 nm. It was observed that the NiO-doped Co nanoparticles facilitated enhanced recombination and migration of active elements, which led to more effective degradation of organic dyes during photocatalysis. We also assessed the electrochemical properties of the materials using cyclic voltammetry (CV) and impedance spectroscopy in a 1 mol% NaOH solution. The NiO-modified electrode exhibited poor voltammogram performance due to insufficient contact between nanoparticles and the electrolyte solution. In contrast, the uncapped NiO's oxidation and reduction cyclic voltammograms displayed redox peaks at 0.36 and 0.30 V, respectively.     

Enhanced dose measurement of zinc oxide nanoparticles by radiochromic polymer dosimeter and Monte Carlo simulation

AimThe aim of this study is to evaluate the effects of Zinc Oxide nanoparticles on dose enhancement factor using PRESAGE dosimeter and Monte Carlo simulation.BackgroundHigh Z materials absorb X-ray remarkably. Among Nano-science, Zinc Oxide nanoparticles are interesting semiconductors, producing reactive oxygen species when irradiated by photons. Therefore, it seems that dose enhancement originating by incorporating ZnO NPs in irradiated volume would increase the therapeutic ratio.Materials and methodsInitially, the PRESAGE dosimeter was fabricated and calibrated. Then Zinc Oxide nanoparticles with an average particle size of about 40 nm were synthesized. At next step, various concentrations of the nanoparticles were incorporated into the PRESAGE composition and irradiated in radiation fields. Then, the mentioned processes were simulated.ResultsPractical measurements revealed that by incorporating 500, 1000 and 3000 μg ml⁻¹ ZnO NPs into PRESAGE the dose enhancement factor of 1.36, 1.39, 1.44 for 1 × 1 cm ² field size, 1.39, 1.41, 1.46 for 2 × 2 cm ² and 1.40, 1.45 and 1.50 for 3 × 3 cm ² could be found, respectively. Simulation results showed that in the mentioned condition, the dose enhancement factor of 1.05, 1.08, 1.10 for 1 × 1 cm ² field size, 1.06, 1.09, 1.10 for 2 × 2 cm ² and 1.08, 1.11 and 1.13 for 3 × 3 cm ² could be derived, respectively.ConclusionThe results of this study showed that dose enhancement increases by increasing concentration of Zinc Oxide nanoparticles. Many reasons such as photoelectric, pair production effects and even Compton scattering can cause dose enhancement for megavoltage beams.     

Synthesis and characterization of zinc oxide nanoparticles by using polyol chemistry for their antimicrobial and antibiofilm activity

The present investigation deals with facile polyol mediated synthesis and characterization of ZnO nanoparticles and their antimicrobial activities against pathogenic microorganisms. The synthesis process was carried out by refluxing zinc acetate precursor in diethylene glycol(DEG) and triethylene glycol(TEG) in the presence and in the absence of sodium acetate for 2 h and 3 h. All synthesized ZnO nanoparticles were characterized by X-ray diffraction (XRD), UV visible spectroscopy (UV), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy(FESEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) technique. All nanoparticles showed different degree of antibacterial and antibiofilm activity against Gram-positive Staphylococcus aureus (NCIM 2654)and Gram-negative Proteus vulgaris (NCIM 2613). The antibacterial and antibiofilm activity was inversely proportional to the size of the synthesized ZnO nanoparticles. Among all prepared particles, ZnO nanoparticles with least size (~ 15 nm) prepared by refluxing zinc acetate dihydrate in diethylene glycol for 3 h exhibited remarkable antibacterial and antibiofilm activity which may serve as potential alternatives in biomedical application.     

Characterization of zinc oxide nanocrystals with different morphology for application in ultraviolet‐light photocatalytic performances on rhodamine B

ZnO nanostructures of different morphology (nanorods, nano‐leaf, nanotubes) were favourably grown using a chemical precipitation process. The prepared ZnO nanostructures were characterized systematically using absorption spectroscopy, emission spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared studies. XRD results showed the hexagonal wurtzite phase of the synthesized ZnO nanostructures. Structural properties such as average crystallite size, lattice constants, volume of the unit cell, atomic fraction, and structural bonds were also studied. The optical band gap of the synthesized ZnO nanocrystals varied from 3.52 eV to 3.69 eV with high quantum yield of the blue emission (~420 nm). Urbach energy for ZnO nanocrystals was calculated to be 0.702 eV, 0.901 eV, and 0.993 eV for nanorods, nano‐leaf, and tube like ZnO crystals, respectively. Morphology of the fabricated nanostructures was investigated using SEM. Photocatalytic degradation of rhodamine B (Rh B) in solution under UV irradiation was explored with different ZnO morphology. Photocatalytic experiments showed that ZnO nano‐leaf had a higher degradation rate of photocatalytic activity of photodegrading Rh B compared with the other tube shape and rods shape nanostructures. The Rh B dye degraded considerably by ～79.05%, 74.41%, and 69.8% within 120 min in the presence of the as‐fabricated fern nano‐leaf, nanotubes, and nanorods of the ZnO nanocrystals at room temperature.     

Algal growth inhibition on cement mortar: Efficiency of water repellent and photocatalytic treatments under UV/VIS illumination

Building materials are regularly affected by the growth of microalgae. The consequences are mainly aesthetic but the colonization can cause biodeterioration of the material in the most extreme cases. This study investigates two building material treatments that can potentially inhibit or slow down such growth: photocatalytic coatings and water repellent treatments. The efficiency of these treatments in terms of biological growth inhibition was tested on the algae species Graesiella emersonii. Algal growth on building materials was investigated using two accelerated tests simulating different types of humidification (water capillary ascent and water run-off) under different lighting conditions. Mortars treated with photocatalytic coating or with water repellent were studied. The algal growth on the mortar surface was evaluated using image analysis (area covered and intensity of fouling). No slow down of the biological growth kinetics could be attributed to photocatalytic substrates. However, for mortars impregnated with a water-repellent preparation, algal growth slowed significantly under water run-off and even stopped under water capillary ascent.     

Ailanthus altissima leaf extract mediated green production of zinc oxide (ZnO) nanoparticles for antibacterial and antioxidant activity

BackgroundFabricating zinc oxide nanoparticles (ZnO-NPs) from plant extracts is a cost-effective, safe, and environmentally friendly alternative to established chemical procedures. This study was aimed at the environmentally friendly fabrication of ZnO-NPs from plant extract. An additional objective was to investigate the antibacterial and antioxidant activity of these biosynthesized ZnO-NPs.MethodsZnO-NPs were fabricated using the leaf extract of Ailanthus altissima, as an eco-friendly approach. The physicochemical properties of ZnO-NPs were explored using UV–visible spectroscopy, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectrometry. The bio-fabricated ZnO-NPs were examined for bactericidal activity against pathogenic bacteria (gram-negative and gram-positive) using the agar well diffusion technique. The antioxidant efficiency of ZnO-NPs was assessed using a DPPH assay.ResultsA surface Plasmon peak was recorded at 327 nm, showing the existence of ZnO-NPs in the reaction solution of plant extract and zinc sulfate hexahydrate salt. These nanoparticles were predominantly spherical and capped by different functional groups of biomolecules. Furthermore, ZnO-NPs showed a dose-dependent antibacterial and antioxidant activity. At 20 mg/mL ZnO-NPs, the maximum bactericidal potential of ZnO-NPs was reported against Staphylococcus aureus (201.2 mm). ZnO-NPs have an IC₅₀ value of 78.23 µg/mL, indicating that they are an effective antioxidant.ConclusionThis research presents an environmentally acceptable method for producing spherical ZnO-NPs with high antibacterial and antioxidant activities. These bio-fabricated ZnO-NPs could be a good option for applications in medicine and the healthcare industry.